Use haveged instead of rngd (That gets added when adding ssh) since rngd
init is taking ~7 mins during boot time
Change-Id: I038c42b8a7c025959248d78940483322421ad5ef
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
Add a new meta-arm-toolchain layer to hold ARM GNU-A toolset recipes
imported from meta-linaro tree, branch: master and commit ID:
504ca3b217c9602b10eda0ec8a9f1055b59e482f.
Change-Id: I5a2907874da2869ab94d7d48e0cf4a1bfe241041
Tested-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Do not try to add distro features from juno machine definition.
Modify juno documentation to mention usbhost and usbgadget in case
someone use a distribution not activating them by default.
Change-Id: I7fc44c9921ce3fdbf069fd5354f37bb2ec38ac53
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
In order to have SCMi or HDMI support, the Juno BSP must use
the Linaro kernel instead of the standard Yocto one.
Change-Id: Ib53cb81a074439e9a4018bf356d749c7fd0a5d5a
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
The following warnings are seen when building fvp-base
WARNING: fvp-base-native-r11p7-30rel0-r0 do_populate_lic: fvp-base-native: No generic license file exists for: GPL in any provider
WARNING: fvp-base-native-r11p7-30rel0-r0 do_populate_lic: fvp-base-native: No generic license file exists for: Apache in any provider
Correct the license names to the expected strings resolves the issue
Change-Id: Ia4962736840de8b4a02d0c9d59b7c14c9999997c
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove meta-arm-integration, as it is not currently being used. Also,
remove the reference in the README.md. These can be added bach when
they are in use again.
Change-Id: If8535d6d9a0a307a42b24e8f42e0eb7847e047c4
Signed-off-by: Jon Mason <jon.mason@arm.com>
The TF-A recipes should only be in meta-arm-integration after we have
submitted them for inclusion in Yocto git tree. Move them to the proper
location until this occurs.
Change-Id: Ia2fa5c5a377392aa45b801bd1f2ae4ca0f056c34
Signed-off-by: Jon Mason <jon.mason@arm.com>
Exceptions will be cases involving overrides, machine specific
varible expansion and cases where variable modification needed to be
done after all += operations.
Change-Id: I7c76a77949d0a012238d488d5a75c489c54abf68
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
Add Yocto support for Gem5:
- add kernel configuration
- add recipes to build an image using boot-wrapper-aarch64
- add recipes to build Gem5 native to run the produced image
- add script to start image using gem5
- add recipe to create a dtb using gem5
- add recipe to build an image using gem5 boot wrapper
- add dts to linux kernel for gem5 for arm64
- add scons for python2 as this is required to build gem5 (until gem5
will support python3)
- add xen patch to limit number of interrupts if hardware is claiming to
have to more interrupts then the number supported by xen
When an image has been built it can be directly started using gem5 using
this command (console is available using telnet localhost 3456):
./tmp/deploy/tools/start-gem5.sh
Change-Id: Iec5ef735fc22643685e29ffbdaf63a55b1111c60
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add Yocto support for Juno development board:
- add machine definition
- add kernel configuration
- add u-boot patch to get the environment from a file in flash
- add trusted firmware extension to produce a firmware image
- add ifupdown interfaces to start eth0 and eth1 on startup
Change-Id: I5046166cf1cc9e80a57815ef6bfb0cbb263a704e
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add recipes and configuration files to add Yocto support
for FVP Base simulator from arm.
The following components are supported:
- trusted-firmware-a
- linux kernel (with specific kernel configuration and dts)
- xen (with meta-virtualization layer)
- unpacking and starting the generated image directly in Foundation
simulator (package must be download from www.arm.com website and put in
the directory downloads/licensed/silver.arm.com).
After building, the following command can be used to start a generated
image in fvp:
./tmp/deploy/tools/start-fvp-base.sh
Change-Id: I1759aecf32e84e25e813d7b0305f49616d4b47ef
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add recipes and configuration files to add Yocto support
for Foundation armv8 simulator from arm.
The following components are supported:
- trusted-firmware-a
- linux kernel (with specific kernel configuration)
- xen (with meta-virtualization layer)
- unpacking and starting the generated image directly in Foundation
simulator (package must be download from www.arm.com website and put in
the directory downloads/licensed/silver.arm.com).
After building, the following command can be used to start a generated
image in foundation:
./tmp/deploy/tools/start-foundation-armv8.sh
Change-Id: Iade343c38f0799ee8523434d555cb3ca42068a86
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Fix TF-A recipe to only download mbedTLS when it is activated.
Allow user to modify TFA_BUILD_DIR and set BUILD_PLAT accordingly in
make arguments to properly set the build directory.
Change-Id: Ib53b245d4d3b2d62e41f0ef238ad03dc45bab056
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Also, removed empty README.md files (which were place holders for the
directories).
Change-Id: I1c1db95158f257015b5eb9f4a6f05219df489b4a
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add a little more description for what belongs in meta-arm/meta-arm (per
feedback from Richard Purdie), and modify the max width to be 80
characters to improve readability.
Change-Id: I8f7b0598e3336132c2594c92cf3400dd5e216baf
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add a generic Trusted Firmware A recipe using TF-A version 2.1
Change-Id: I873509970bd44c6cfdaa0456516197a4eebf6ebd
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add README and License Files in the root directory describing the layers
and process for interacting with the meta-arm layer. Create the
directories for future layers (and add empty README files to force the
directories to be created by git).
Change-Id: I4d70759bf90b1c964e6d9040d145737b2f441205
Signed-off-by: Jon Mason <jon.mason@arm.com>
