To avoid having always tools that depend on git ls or other
git plumbing to include and spin around the enormous content of
the build directory.
Just add it to the ignore file and make that build content,
that will never get in the repo invisible to git and tools.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For some reason the kas 3.2.1 container fails:
No such file or directory: '/builds/engineering/yocto/meta-arm/ci/ci/base.yml'
Note the repeated /ci/, which is wrong.
Pin the kas container to 3.2 for now until this is resolved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
The initramfs needs to be very small, but since oe-core d6a62e kmod has
enabled OpenSSL support which doubles the size of the initramfs,
resulting in boot failures.
Signed-off-by: Ross Burton <ross.burton@arm.com>
With the 6.1 kernel, fvp-base logs the warning:
[NOTE]: 'CONFIG_ARM_CPUIDLE' last val (y) and .config val (n) do not match
This is because the kernel idle configs have changed. Remove this
entry, as it is no longer necessary.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update kernel patches and configs for the v6.1 kernel. Previously, it
was using the linux defconfig as a starting point. It is now using the
local kernel metadata.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update qemuarm-secureboot to work with the latest u-boot version and
remove the old, unneeded version from meta-arm
Signed-off-by: Jon Mason <jon.mason@arm.com>
New arm-ffa-tee and arm-ffa-user drivers are compatible with 5.* and 6.1 kernels.
Signed-off-by: Anton Antonov <Anton.Antonov@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream has updated u-boot to v2023.01, but the update is causing
problems with some machines. Temporarily add a v2022.10 recipe until
the issues can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream has updated u-boot to v2023.01, but the update is causing
problems with some machines. Temporarily add a v2022.10 recipe until
the issues can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
A recent commit compressed the kernel image (to Image.gz) and
by default enabled an initramfs image. In the case for when
such that (initramfs) is not desirable, the deploy step of the
Juno firmware will still try to install the Image file, (not
Image.gz), so this fails:
ERROR: firmware-image-juno-1.0-r0 do_deploy: ExecutionError('/oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477', 1, None, None)
ERROR: Logfile of failure stored in: /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/log.do_deploy.360477
Log data follows:
| DEBUG: Executing python function sstate_task_prefunc
| DEBUG: Python function sstate_task_prefunc finished
| DEBUG: Executing shell function do_deploy
| cp: cannot stat '/oe/build/tmp-glibc/deploy/images/juno/Image': No such file or directory
| WARNING: /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477:152 exit 1 from 'cp -L -f /oe/build/tmp-glibc/deploy/images/juno/Image /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/image/juno-firmware-19.06/SOFTWARE/'
| WARNING: Backtrace (BB generated script):
| #1: do_deploy, /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477, line 152
| #2: main, /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477, line 163
NOTE: recipe firmware-image-juno-1.0-r0: task do_deploy: Failed
ERROR: Task (../meta-arm/meta-arm-bsp/recipes-bsp/images/firmware-image-juno.bb:do_deploy) failed with exit code '1'
This updates the else case for when an initramfs image is not
in use so that the right kernel image is deployed, by using
the KERNEL_IMAGETYPE variable, to use either version of the
kernel image.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SRC_URI, SRCREV AND SRCBRANCH variables are currently used
inconsistently across recipes in meta-arm, leading to difficulties
customizing the configuration in external BSP layers where necessary.
Standardize usage across commonly used recipes so that:
* SRC_URI contains a SRC_URI_PACKAGE_NAME variable per component which
can be used to easily configure a mirror. This variable uses
default assignment so that it can be easily overridden using an
environment variable, e.g. to point to an internal mirror that cannot
be committed externally.
* SRCBRANCH is defined per component.
* SRCREV is defined per component.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For models that require a license, ARMLMD_LICENSE_FILE is used to define
the location of a license file or server. If the variable is not set in
Bitbake it will not be set in the model environment.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
FVP_ENV_PASSTHROUGH may contain variables that have not been set.
d.getVar returns None in this case. Detect this and skip setting the
variable in the model environment.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Define FVP_ENV_PASSTHROUGH's vardeps to equal itself, so that the
fvpconf is regenerated if any of the defined variables change.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
aa89fe3f ensured environment variables necessary for GUI applications
are passed through to the model despite runfvp env var restrictions. Add
XAUTHORITY to this list. This is useful when doing X-forwarding with
Kas, which creates its own home directory.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the Arm GCC source to the latest version. Also, update the GCC
patches to apply cleanly, removing those that are no longer relevant.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Disable fatal warnings for tfm. This removes issues with RWX and others
when using the new binary toolchain versions.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change u-boot and machine config to default to booting a compressed
initramfs. This allows for easier testing. A compressed image is
needed as the image is too big for the storage, and the error notifying
of such is vague.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Kas 3.2 ships python3-subunit, so we don't need to try to install that
anymore.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Kas 3.2 has a 'dump' plugin, so use that instead of cat in a shell.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This job doesn't use the standard helpers, so needs to pass these
explicitly otherwise it can pick up an old SHA.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade to v2022.10
This includes Corstone-1000 out of tree patches.
FF-A patches are the latest sent to U-Boot mailing list (v8).
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rebase corstone500 u-boot patches to 2022.10 version.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since oe-core 868dfb4 rng-tools is no longer depended on by openssh, so
we don't need to remove it ourself.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
meta-clang now builds pixman with GCC until this is resolved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now we're using master these workarounds are not needed anymore.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We're now compatible with oe-core master, so update the CI to build
against master branches instead of langdale.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The oe_import() function was removed in oe-core when addpylib was
added[1]. However, meta-arm-toolchain doesn't ship any library code so
this call doesn't do anything useful anyway.
[1] 1f56155e91da2030ee0a5e93037c62e1349ba89f
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
OE-core 4901c9d471cab99d52876842980222ce271b66e4 "base: Switch to use
addpylib directive and BB_GLOBAL_PYMODULES" means that ${LAYERDIR}/lib
is no longer searched by default when loading test controllers.
meta-arm defines some custom test controllers for testing FVPs, so add
an addpylib directive to meta-arm/conf/layer.conf to fix testimage on
FVPs.
testimage.bbclass still has its own test case loading logic based on
BBLAYERS, so other layers that only define test cases (not controllers
or other Python libraries) need no further changes.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I7fab638b4a1610d30efad2dae214378d096e0fc4
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core's master branch is diverging from langdale and meta-arm will be
following this, so drop compatibility with langdale in master so we're
free to diverge too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SCP-firmware CMake compile step automatically attempts to execute
cppcheck if both:
* cppcheck can be located using find_program
* DISABLE_CPPCHECK is not defined
cppcheck is not readily available in OE-core and is not an essential
part of the compilation process for end-users, so explicitly disable the
cppcheck step by passing DISABLE_CPPCHECK to CMake.
Additionally, because the OE-core CMake toolchain file cannot be used,
find_program may locate cppcheck on the host machine, which will cause
the build to fail if it is not the recommended version (as it is in
recent Linux distros).
Issue-Id: SCM-5864
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ia87a0cbbb67ac1d6f3b26cfb5747a85b46131f81
Signed-off-by: Jon Mason <jon.mason@arm.com>
If CMAKE_BUILD_TYPE=debug (lowercase), SCP-firmware builds with debug
compiler flags but BUILD_MODE_DEBUG is not defined in C code so features
that are conditionally enabled/disabled in debug mode are not active.
Pass capitalized "Debug" and "Release" strings to CMAKE_BUILD_TYPE to
ensure Debug mode is fully enabled when SCP_BUILD_RELEASE = "0".
SCP_BUILD_RELEASE = "1" (the default) for all machines in meta-arm-bsp
so they are unaffected.
Issue-Id: SCM-5864
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I93220420eedd2e3e6c169679efcaf4642dd5bc51
Signed-off-by: Jon Mason <jon.mason@arm.com>
The include file should be pointing to `optee-os-3.19.0` instead of
`optee-os-3_19` (which does not exist).
Fixes: 3259a2a840 ("arm/optee: support optee 3.19")
Signed-off-by: Theodore A. Roth <theodore_roth@trimble.com>
Signed-off-by: Theodore A. Roth <troth@openavr.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
apply_local_src_patches.bbclass was added in a previous patch to handle
the application of patch files located inside the fetched source code.
find is used to collect the patch files which does not guarantee the
order of its output. Pipe the output of find into sort to ensure patch
files are applied in the correct order.
Issue-Id: SCM-5864
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I1082fb7a726a7745289a5aa8bb6447bef57a94b0
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that the FVP is available for both aarch64 and x86-64, don't set a
tag so this can run on both architectures.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There is now a beta release of the Base-A AEM FVP for aarch64!
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We can download both x86-64 and aarch64 binaries, so ensure the SRC_URI
entry is named to identify them.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There is a new optee version 3.19. Currently, qemuarm-secureboot cannot boot
optee 3.19 out-of-the-box. This pins optee-os version to 3.18 for
qemuarm-secureboot.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
From: Emekcan <emekcan.aras@arm.com>
Adds build configuration to support optee-os 3.19 for N1SDP.
Also, it patches optee-os to support external DT for N1SDP.
Signed-off-by: Emekcan <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Moves optee-3.18 and optee-tadevkit patches into
related directories.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The libts recipe assumes generated cmake file will be suffixed with
'-noconfig'. This is only true when building with the default type
i.e. "".
Check which target cmake file has been generated before trying to
patch it. This fixes 'no such file' error when building with an
explicit type (Debug, Release, etc).
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
