The current code is waiting 5 seconds to get an EOF on the
console pexpect spawn object, on a particularly slow machine
this timeout was not enough ending up into a TIMEOUT exception.
To solve this, increase the timeout and handle the TIMEOUT exception
by printing an error on the debug console instead of letting the
exception raise up to the stack, force the spawn object close() call
as well, since at this stage we would like the process to terminate
anyway.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
util-linux is failing when compiling with:
| configure: error: libmount_mountfd_support selected, but required mount FDs based API not available
Remove this feature when building with the binary toolchain to avoid
this issue.
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The Application Root of Trust and the PSA Root of Trust was not
isolated in TF-M Isolation Level 2 beacuse of the misconfiguration of
the MPU. The added patch fixes this issue.
Fixes: a8f47e9 (arm-bsp/trusted-firmware-m: corstone1000: update to 2.0)
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Create new yml file "corstone1000-extsys.yml" which adds "corstone1000-extsys" as
new MACHINE_FEATURE.
Based on this, external system components can be enabled or disabled from the
Linux Kernel and U-Boot.
Reason for change:
DT-schema test is failing for the SystemReady-IR v2.0 certification because
device tree binding for remoteproc dts node corresponds to external system has
not been upstreamed in the Linux Kernel yet.
So, it has been decided to make enablement of external system configurable in
order to make Corstone1000 FVP SystemReady-IR v2.0 certifiable.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Currently the run_cmd, which is a wrapper for self.target.run()
that uses SSH to spawn commands on the target, can fail spuriously
with error 255 and cause the test to fail on slow systems.
In order to address that, introduce a retry mechanism for the call,
that is able to wait some time for the system to settle and retry
the command when the error code from SSH is 255.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Define “DISTRO_UNATTENDED_INST_TESTS” variable in meta-arm-systemready
independently from meta-arm-auto-solutions. This will allow running
the unattended installation without meta-arm-auto-solutions.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The oeqa test responds to the boot loader prompt error message and
waits till the distro installation is finished.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the Fedora kickstart configuration file and define a function to
modify the unpacked ISO image to add the kickstart file inside and
modify the grub.cfg file.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add a new inc file to unpack and repack the distro ISO image after
adding the kickstart configuration file inside.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change defaults repo refspec in fvp-base.yml file from master to
scarthgap.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch enables logging with timestamps for individual pexpect
assertions to ease the debugging of failed tests and the tuning of
timeouts. It measures the execution time of all pexpect calls and logs
the actual duration for each.
Only "callable" pexpect calls are timed (e.g. expect, sendline, but not
before or after).
Signed-off-by: Divin Raj <divin.raj@arm.com>
Signed-off-by: Ziad Elhanafy <ziad.elhanafy@arm.com>
Signed-off-by: Peter Hoyes <peter.hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This procps fix has been merged upstream in oe-core aaced482, so we can
remove this patch now.
This reverts commit fef5eafc08.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Add Fedora distribution version 39.1.5 installation to fulfill
the SystemReady IR.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Improve the documentation in the user guide of the following tests:
- SystemReady-IR tests
- Manual capsule update and ESRT checks
- Linux distros tests
- UEFI Secureboot (SB) test
- PSA API tests
In addition, we moved the tests in one section for better readability.
Signed-off-by: Delane Brandy <delane.brandy@arm.com>
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This flag should not be set here and the ARM_FVP_EULA_ACCEPT
should be set to True manually before building for the FVP, as it is
mentioned in the Corstone-1000 User guide:
export ARM_FVP_EULA_ACCEPT="True"
Fixes: 6e2a54748 ("kas: Corstone-1000 kas files updated")
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The BB_HASHSERVE_UPSTREAM has issues which cause significantly less of a
match than expected. Update with the correct values to get the expected
behavior.
Fixes: 6e9525115b ("CI: add Yocto Project SSTATE Mirror")
Signed-off-by: Jon Mason <jon.mason@arm.com>
The reset has to be removed from the TF-M side after capsule update
because it caused data abort exceptions on the host side.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
The default branch will be scarthgap so the poky and
openembedded will follow this branch.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The buffer size has to be increased to fit the EFI variables which got
increased metadata sizes.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The increased EFI variable metadata need bigger buffer so it can
be transfered to the Secure Enclave without memory overflow
issues. The heap and buffer sizes had to be aligned with the.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The private authenticated variable changes increased the variables
metadata. The PS max asset size and related buffer sizes have to be
increased because of this.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
OPTEE and ftpm tests are failing in CI on slower systems due to timing
out, but actually finish when given enough time to complete. Increase
the timeout value to be roughly 100 seconds longer than the time it is
currently taking to finish on the slower systems.
Fixes: d450786667 ("oeqa runtime: add optee.py test")
Fixes: ba315f7242 ("oeqa runtime: add ftpm.py test")
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade the openSUSE distribution from version 15.4 to version 15.5
openSUSE Licenses updated to reflect update from 15.4 to 15.5
License now includes: Apache-1.1, BSL-1.0, IPL-1.0, Sleepycat, Zlib
Signed-off-by: Ben Cownley <ben.cownley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This changeset updates the user guide to test the secureboot for both the
FVP and FPGA.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The psa-iat-api-test was failing because the PLATFORM_HAS_ATTEST_PK
flag was added to the build for Corstone1000.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Crypto-AEAD-APIs tests fails on mps3. Configures CC312 mps3 model
same as predefined cc312 FVP configuration while keeping debug
ports closed.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Corstone1000 does not properly clean the cache and disable gic interrupts
before the reset. This causes a race condition especially in FVP after reset.
This adds proper sequence before resetting the platform.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some networks limit outgoing git: traffic, so use https:.
Fixes: 0cec3e5 ("arm/gem5/boot-wrapper-aarch64: Move main recipe to meta-arm")
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Includes TS and PSA dependency for firmware image build.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Recent changes to the FVP Base homepage have caused it to no longer be
searchable with the current Yocto tooling. Disable it to prevent issues
with `devtool check-upgrade-status`.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add corstone1000-recovery-image image based on core-image-minimal
while disabling the testimage task which is irrelevant in case of
an initramfs bundle.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Corstone-1000 no longer uses OpenAMP, and it was the only platform
which needed this library.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Corstone-1000 no longer uses OpenAMP, and it was the only platform
which needed this library.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The OpenAMP is replaced by the RSE Communication Protocol and
the documentation had to by updated to reflect this change.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Added the Corstone-1000 FVP platform to the ACS test build as well as
adding the arm-systemready-firmware variant to the Corstone-1000 FVP
build.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the Corstone-1000 user guide with the new instructions on how to
build/use an ESP image and how to use the meta-arm-systemready layer to
run the ACS tests.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SystemReady IR ACS test suite require that there is a valid ESP
partition available to the system. This change creates a new image that
only contains a ESP partition and ensures it's mounted on the second MMC
card so it's available when the SystemReady tests run.
The diagnostic level of the 2 MMC cards have also been lowered to
improve the ACS test duration.
Corrected a spelling mistake in the corstone1000-flash-firmware-image.bb
file.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Added the missing meta-arm-systemready required variable to enable its
use with the corstone1000-fvp machine. Also explicitly set all the
consoles.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The nodistro settings in poky set the TMPDIR variable to include the
TCLIBC value so we need to spot that and swap the TCLIBC for the musl
one used in the firmware multiconfig.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The regex used to validate compatible machines is incorrect as it's only
checking the machine name starts with "fvp" not "fvp-" as intended.
It's also been modified to allow FVPs called xxx-fvp to be compatible
with Corstone-1000.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
After enabling additional features in Trusted Services, the size of BL32
image (OP-TEE + Trusted Services SPs) is larger now. To create more space
in secure RAM for BL32 image, this patch removes NS_SHARED_RAM region which
is not currently used by corstone1000 platform.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change enables the UEFI secure boot and its related configurations
for corstone1000
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The .nopt and capsule are generated during the yocto build. Sync the
documentation with the changes.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Currently, only the Corstone-1000 platform uses the capsule generation
class. Corstone-1000 uses U-Boot instead of EDK2. With this change,
the dependency on EDK2 was removed.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The .nopt image is used during the UEFI Update Capsule generation.
This .nopt image was generated manually when it was needed.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
optee-os test xtest needs additional test trusted applications (TA) from
optee-os-ta package to pass. Execution time for ftpm test is around 21
seconds and 596 seconds for optee-test/xtest on an x86_64 build machine.
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
optee-os test xtest needs additional test trusted applications (TA) from
optee-os-ta package to pass. Execution time for ftpm test is around 18
seconds and 430 seconds for optee-test/xtest on an x86_64 build machine.
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Test checks that ftpm kernel driver interfaces are available.
If fTPM optee TA is missing or crashes, the kernel driver does not
show the interfaces. A more functional tests would be to use tpm2-tools
from meta-security/meta-tpm but those require additional layer
dependencies which are maybe too much for now. tpm2-tools also depend
on starting tpm2-abrmd before the tools work. The ftpm kernel driver
depends on fully running tee-supplicant in userspace and the optee
side ftpm TA which takes some time. When manually running the tests
some of them failed since ftpm was not yet initialized. The boot
was not complete in those cases so added a workaround for that.
Better would be for all of the tests to start only once boot is
complete, not when ssh is available. Also, the qemuarm64-secureboot
machine includes optee and ftpm TA but does u-boot is not configured
to use the TPM device so boot is not measured.
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
If firmware TPM TA is compiled into optee, it needs a bit more
heap to pass optee-test/xtest suite.
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
All other firmware boot components also continue booting
if TPM is not found. It is up to subsequent SW components
to e.g. fail if rootfs can't be decrypted. Enables policies
like fall back to unencrypted rootfs if TPM device is
not found with qemu and swtpm.
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There are two recipes in meta-arm-systemready that download ISOs for
testing purposes. Build them in CI to verify that the fetch is
successful.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
These recipes look like images but are not constructed the same way,
specifically there is no WORKDIR/rootfs/ directory. If buildhistory is
enabled this will cause it to abort, so disable image data collection in
buildhistory.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We recently switched the CI to not disable ptest, but this breaks builds
that use the GCC binaries built by Arm (external-arm-toolchain). This is
because the external-arm-toolchain recipe can't build packages for the
target, and the standard oe-core gcc recipes assume that they're being
built with themselves and make assumptions, specifically that libunwind
was enabled and headers can be copied directly from the sysroot.
This is a bigger problem that should be solved somehow, but for now we
can just remove ptest in the external-gccarm CI jobs which removes gcc
from the builds (it comes in via elfutils-ptest RDEPENDS).
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Functions that take 32-bit time_t types are unavoidable in the libc, so
ignore the warnings.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch will be merged upstream soon, apply it locally to unblock CI.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add YAML language server comments so that IDEs know what schema to use
for the Kas files.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
trusted_services.py:test_15_crypto_service runs ts-service test with
an incorrect argument list. The -g argument does not accept two group
names. This resulted in a silent failure.
Fix this by relying the pattern matching capability of the argument.
Additionaly remove references to OP-TEE from test messages as TS tests
are SPMC agonistic.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update TS and dependencies to latest version of the integration branch.
Remove patches merged upstream.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add a recipe to enable building and deploying the FWU service
implemented in the Trusted Services Project. The FWU service can
help vendors to meet PSA certification requirements.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Due to how the timer in u-boot is implemented, it's quite possible for
a two second timeout in the u-boot login to actually take over 15s to
expire.
Take a patch from the mailing list to implement this differently so the
timer runs in an accurate amount of time.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
add support for the remoteproc control feature for the external system
With this feature we can switch on/off the external system on demand:
echo stop > /sys/class/remoteproc/remoteproc0/state
echo start > /sys/class/remoteproc/remoteproc0/state
During Linux boot the remoteproc subsystem automatically start
the external system. The user can use the commands above to
stop then start the remote core.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
describe the external system as a remoteproc node in the device tree
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
install the external system binaries under /lib/firmware
The kernel's remoteproc subsystem expects the firmware file to be under /lib/firmware
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When trying to replicate a build locally, having the exact list of Kas
files that was used is very useful.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the Yocto Project public SSTATE mirror to its own unique yml file.
This allows for developers to use this to speed up builds, while not
adding in the default case. This "off by default" is because it can add
10s of minutes to each build, which might not be beneficial to those who
are using SSTATE dir locally.
Also, removing the removal ptest distro feature, as this change prevents
an optimal usage of the YP SSTATE mirror (~30% match to ~90% match for
qemuarm64).
Signed-off-by: Jon Mason <jon.mason@arm.com>
These BSPs are now obsolete.
Users of generic-arm64 should use genericarm64 from meta-yocto-bsp.
Users of qemu-generic-arm64 should use sbsa-ref from meta-arm-bsp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This is mostly based on the existing qemu-generic-arm64 machine, but by
not being based on the genericarm64 and instead being specifically a
machine to run on the qemu sbsa-ref machine we get to tune differently.
Specifically, this configures sbsa-ref to be a Neoverse N2 (v9), and the
tune is set to match. Another notable difference to qemu-generic-arm64
is that the kernel configuration is at present defconfig. We may wish
to change this in the future to be the same fragmented configuration as
genericarm64.
We have to ignore two testimage parselogs failures: one from NUMA which
will be fixed in a future EDK2 release, and one from efifb where we
should be using the bochsdrm driver instead (further investigation is
needed)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the new genericarm64 in meta-yocto-bsp to the CI.
This new BSP is heavily based on the meta-arm generic-arm64 machine, but
with an all-new fragmented kernel configuration.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some BSPs use a proper initramfs and putting a SSH server into them
via this :append isn't ideal. Adding using += should be sufficient.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Every platform should have the chance to try the -rt patches.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This class is no longer used by any machines, so remove it.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
- The Secure Enclave Proxy Secure Partition fails at psa_call()
because wrong parameter was passed.
- The SMM Gateway initialization failed because a malloc()
returned a NULL pointer. The SMM_GATEWAY_MAX_UEFI_VARIABLES
had to be decreased to avoid this.
- Increase shared memory buffer size and add buildtime check
- Use __packed for the variable_metadata struct
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The Trusted Services v1.0 uses new RPC protocol and the message
fields in u-boot had to be synchronized.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add configuration settings to TF-A, OP-TEE and TS SPs needed to get TS
built and run on the fvp-base machine.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Version v11.25 was released and it fixes measured boot. Update the
recipe and integrate the new version.
The pattern of the download URL has changed. Add functionality to
calculate a new URL fragment from the package version.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The current version of the TS recipes fails to build if the TS
environment is not set to opteesp. Change the recipes to allow building
the sp environment.
This environment targets "generic" secure partitions and produces SPMC
agnostic SP binaries which should be able to boot under any FF-A v1.0
compliant SPMC implementation.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
MbedTLS fails to build when FORTIFY_SOURCE is enabled and the NWd
configuration is used. Disable the compilation option temporary till
the root cause can be fund and a proper fix be made.
The build only fails when building from yocto. The OP-TEE integration
works fine with gcc v13.2_rel1.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
- Update Trusted Services to v1.0.0.
- Update TS "external components" references to fetch the version
dictated by the TS repo.
- Remove patches merged up-stream.
- Update the TS nanopb integration fix (see 210a6ace83)
- Update TS test integration.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
- Update driver version to v2.0.0
- Follow up the name change. The driver has been renamed from
arm_ffa_tee to arm_tstee.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The .nopt and capsule are generated during the yocto build. Sync the
documentation with the changes.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Currently, only the Corstone-1000 platform uses the capsule generation
class. Corstone-1000 uses U-Boot instead of EDK2. With this change,
the dependency on EDK2 was removed.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The .nopt image is used during the UEFI Update Capsule generation.
This .nopt image was generated manually when it was needed.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
A SRCREV for arm-platforms-kmeta was added years ago to get
yocto-check-layer working at the time, but was never removed (and never
updated). Removing now, since it is not necessary.
Signed-off-by: Jon Mason <jon.mason@arm.com>
A patch was dropped when trusted-firmware-m was updated to 2.0 but it
had not yet been merged upstream (2.0 or master).
Restore the patch to fix regression on Corstone-1000
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade the Debian distribution from version 11.7 to version 12.4 in the distribution installation.
Signed-off-by: Amr Mohamed <amr.mohamed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream master and scarthgap have now diverged, so use scarthgap whilst
we prepare for release. At the time of writing there is no scarthgap
branch for meta-clang, so leave that on master.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Increase the number of TLB entries from 0x80 to 0x400 and disable the
checking of memory attributes. In our CI, this makes testimage run in
576s instead of 803s.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Multiconfig is only needed when recovery and the mass storage images
are built together. It is not needed when firmware-only build is used.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enables host firewall and mpu setup for FVP. It also fixes secure-ram
configuration and disable access rights to secure ram from both normal world
for both mps3 and fvp.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
MM Communicate buffer is accessed by normal world but at the moment so it
should be located in DDR instead of secure-ram. This moves mm communicate
buffer to the DDR for trusted-service components.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
MM Communicate buffer is accessed by normal world but at the moment
it's allocated in the secure ram. This moves mm communicate buffer
to the DDR and also fixes the capsule buffer size since it cannot be
more than the bank size.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove the preferred version so that we track the latest release.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some of the corstone u-boot patches are not properly formatted, causing
scripting issues. Regenerate them via:
devtool modify u-boot
git format-patch -N --no-signature devtool-base..HEAD
mv *.patch ~/meta-arm/meta-arm-bsp/recipes-bsp/u-boot/u-boot/corstone1000/
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest stable version (1.5.2), comprised of the following
commits:
5d86f27a8c0a opencsd: Update version info and README for 1.5.2
71c50dda716f build: win: Fix name for ocsd-perr utility in windows build
599551d3ea09 opencsd: docs: Update docs for test programs
769faaa6368a opencsd: docs: Update trc_pkt_lister man file
b957577e71bf tests: Fix typo in trc_pkt_lister help output
dca84a74a0d5 build: Fix clean of mem_acc_test
85fd025eed35 opencsd: stm: Fix build warning in 64 bit build of STM
2145b81b4b61 opencsd: etmv4: Fix build warning on decoder
169cc07d3625 docs: Fix formatting in README.md
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest stable version (2.10.3), comprised of the following
commits:
fc93d0edfc52 docs(changelog): changelog for lts-v2.10.3 release
4a10950a8538 docs(changelog): display all sections
bafc27c8d7cf chore: rename Poseidon to Neoverse V3
a6256d7a2638 feat(cpu): add support for Poseidon V CPU
ef393a3f9fa2 fix(cpu): correct variant name for default Poseidon CPU
81931a13a835 fix(cpus): workaround for Cortex-A715 erratum 2413290
baf14745f117 fix(cpus): workaround for Cortex-A720 erratum 2926083
635c83eb456a chore: update status of Cortex-X3 erratum 2615812
03636f2c3d60 fix(cpus): workaround for Cortex-A720 erratum 2940794
e86990d0911d fix(cpus): fix a defect in Cortex-A715 erratum 2561034
b59307ef8efd fix(cpus): workaround for Cortex-A715 erratum 2413290
44f36c48f280 docs(sdei): provide security guidelines when using SDEI
11cb0962f7ac docs(threat_model): mark power analysis threats out-of-scope
3e3ff298a614 fix(cpus): workaround for Cortex-A715 erratum 2344187
d466c5d4d27b fix(cpus): workaround for Cortex-X4 erratum 2701112
940ebbe2d1d0 fix(cpus): workaround for Cortex-A715 erratum 2331818
04c60d5ef31c fix(cpus): workaround for Cortex-A715 erratum 2420947
b7ed781eea74 fix(gic600): workaround for Part 1 of GIC600 erratum 2384374
58646309aedf chore: rearrange the fvp_cpu_errata.mk file
a234f540b727 fix(cpus): add erratum 2701951 to Cortex-X3's list
a24c8006ea39 refactor(errata-abi): workaround platforms non-arm interconnect
9fe65073d442 refactor(errata-abi): optimize errata ABI using errata framework
301698e15bc8 fix(cpus): workaround for Cortex-A715 erratum 2429384
5f8f745c7e99 fix(cpus): workaround for Cortex-X3 erratum 2372204
Signed-off-by: Jon Mason <jon.mason@arm.com>
The get_testimage_json_result_dir helper in OE core was deleted in
commit 01b1a6a5a4e7cede4d23a981b5144ae9c8306274 in preference for a
common utility. Change the reference within the Arm SystemReady ACS
log handler utlity.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change upgrades the tftf version to v2.10 for the Corstone-1000.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since sbsa-acs requires edk2-firmware, it bases its SRC_URI on that.
The first entry of SRC_URI is what is used to determine the latest
version. So, specify an alternative URI to determine the correct
version.
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change upgrades the trusted-firmware-m version to 2.10
for n1sdp.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
As of oe-core ba391d3, hashserv lookups will use authentication from the
.netrc file. However, Kas will write invalid netrc files with comments,
which causes bitbake to emit warnings.
This has been fixed in Kas in e700729 but until Kas 4.3.2 is released we
can ignore this warning specifically when checking the logs.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When the URL and names of the toolchain tarballs changed, the
UPSTREAM_CHECKs were not modified with the proper values. This causes
the tooling to not show when new versions are available. Modify to get
it working again.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Initial checking providing support for RMM on QEMU's "virt" machine.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To reduce build and test times in CI, move the dev kernel outside the
standard matrix. This results in it still being built and tested for
the platform, but only with gcc/glibc (and not against clang and musl).
This greatly reduces the number of permutations that need to be
verified.
Signed-off-by: Jon Mason <jon.mason@arm.com>
gcc-arm-none-eabi v11.2 is no longer needed by tf-m. Remove this
version, as there is a newer one available.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest version of SCP. In this release, some of the
platforms were grouped into common family directories, which
necessitated adding a variable to specify which one.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest version. Also, remove the gcc12 workaround, as
that was added in edk2 commit 206168e83f090, which has been included
since the 202305 release.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the TF-A recipe to the latest stable version (2.10.2).
NOTE: tf-a-tests did not have a corresponding stable release. So,
keeping back at 2.10.0.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Adds a recipe (ts-sp-block-storage) to build the Block Storage
secure partition to enable feature development for downstream users.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove scp-firmware sha for intermediate version
to update to v2.13 according to the Arm Reference solutions
Feb-2024 manifest.
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
With clang 18, optee-os no longer compiles cleanly. It is now seeing:
| In file included from core/arch/arm/kernel/vfp.c:6:
| In file included from core/arch/arm/include/arm.h:131:
| core/arch/arm/include/arm64.h:436:1: error: expected readable system
register
| 436 | DEFINE_U32_REG_READWRITE_FUNCS(fpcr)
| | ^
| core/arch/arm/include/arm64.h:417:3: note: expanded from macro
'DEFINE_U32_REG_READWRITE_FUNCS'
| 417 | DEFINE_U32_REG_READ_FUNC(reg) \
| | ^
| core/arch/arm/include/arm64.h:411:3: note: expanded from macro
'DEFINE_U32_REG_READ_FUNC'
| 411 | DEFINE_REG_READ_FUNC_(reg, uint32_t, reg)
| | ^
| core/arch/arm/include/arm64.h:398:15: note: expanded from macro
'DEFINE_REG_READ_FUNC_'
| 398 | asm volatile("mrs %0, " #asmreg : "=r" (val64));
\
| | ^
| <inline asm>:1:10: note: instantiated into assembly here
| 1 | mrs x8, fpcr
| | ^
Issues are also seen on optee-examples and optee-test.
Forcing GCC for all optee recipes until this issue can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The workaround is no longer needed because with the
0043-firmware-psci-Fix-bind_smccc_features-psci-check.patch file the
u-boot PSCI driver is compliant with the PSCI specifications.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The u-boot PSCI driver was not compliant with the PSCI specifications so
this patch had to be added.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
GNU Arm compiler version greater and equal than *11.3.Rel1*
has a linker issue in syscall for TF-M 1.8.0. Let's bump to
TF-M 2.0 which contains the fix for the issue.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Corstone-1000 uses trusted-firmware-m as secure enclave software
component. Due to the changes in TF-M 2.0, psa services requires
a seperate client_id now. This commit adds smm-gateway-sp client id to
the FMP services since FMP structure accessed by u-boot via
smm-gateway-sp.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable the patch-status warning for meta-arm and meta-arm-bsp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The user guide document for Corstone-1000 has been updated to reflect
the changes required following the multiconfig changes as well as now
running the fvp within the kas shell to ensure all environment variables
are picked up correctly.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The 2 Corstone-1000 kas files files are updated following the
multiconfig changes. The pinned commits have been commented out and
the default branch changed to master to allow the file to build valid
images.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Fix the build with DISTRO_FEATURES containing "usrmerge":
make: *** No rule to make target '/.../optee-os/4.1.0/recipe-sysroot/lib/optee_armtz/bc50d971-d4c9-42c4-82cb-343fb7f37896.stripped.elf', needed by '/.../optee-os/4.1.0/build/core/early_ta_bc50d971-d4c9-42c4-82cb-343fb7f37896.c'. Stop.
Fixes: 6a105f47b9 ("optee-ftpm: Install artifacts into nonarch_base_libdir")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To ensure the psa and optee tests are included in the initramsfs based
rootfs included within the flash image so the tests can be run.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
To allow us to continue to ship Corstone-1000 releases that only include
the firmware with the built in Linux image we need a way to build it
outside of the multiconfig builds.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
By building the Corstone-1000 firmware under the firmware multiconfig we
can also build a minimal standard core image to be mounted in the fvp as
a mass storage device.
To do this we had to enable the MMC card interface in the Corstone-1000
kernel configuration.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
To enable building rescue or bootstrap images that can be included into
firmware a "firmware" multiconfig option is required to allow the
building with different options to any mass storage image they may also
be built.
As this multiconfig build will occur under a different TMPDIR, we also
provide a deployment image to allow easy copying of the firmware into
another deploy dir.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
The TF-M configuration step can fail if the doxygen executable is found.
This commit disables the doc generation until this is fixed in the
upstream repos.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Bumped kernel version to v6.6 and rebased N1SDP kernel PCIe quirk patches on top of this new version.
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>
Since there are no platforms using this version, the related files can
be removed.
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>
As we intend to build 2 Corstone-1000 disk images, one for the firmware
in flash and an external mass storage image the existing
corstone1000-image.bb file has been renamed to
corstone1000-flash-firmware-image.bb to make it clear what it's for.
The wks file for specifing the image layout has also been renamed to
make its purpose clearer.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
We can now use the standard poky distro configured to be small by
switching distrobution and using the standard minimal image
from poky.
To do this we also remove and image configuration options from the
machine config and apply them in the kas files.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Moves a number of setting from the machine definition to the actual
recipes they apply too.
Added image configuration and dependancies to the flash image definition
file.
Reordered the settings in the machine definition to group them by
component that are related to.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Moved the U-Boot configuration items from the machine definition to the
Corstone-1000 specific U-Boot append file as it makes it easier to the
U-Boot configuration for a machine in one place and to make it more
consistant with other platforms.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
The capsule_cert and capsule_key file generated by u-boot for
corstone1000 do not get deployed correctly since writingh the output directly
to ${DEPLOY_DIR_IMAGE} causes the sstate mechanism to malfunction
especially in the CI builds. This patch fixes the issue and deploy the
generated files correctly.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Setting an API key means we get higher rate limits. Because keys are
private, the key must be set in the environment of the runner.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This changeset fix the tftf tests issue on n1sdp. Before this change, the tftf tests were getting stuck on n1sdp.
The following changes have been done:
1. There were some tftf tests based on multicore which involve powering up the other cores. These tests were creating
issues and the same thing has already been mentioned in the tests-to-skip.txt file for n1sdp platform in tftf source.
Those tests are skipped while executing tftf and patch has been created.
2. The TFTF_MODE variable added for tftf v2.10 recipe file, as did earlier for tftf v2.9. With the help of this, we can
enable debug or relase mode. The configuration based on this has been added for n1sdp in the corresponding bbappend file.
3. Add PREFERRED_VERSION_tf-a-tests for v2.10.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add a Kas fragment to enable the CVE checker. Disable warnings by
default but show them for the layers in meta-arm, because we only care
about meta-arm issues in this CI.
Explicitly hide kernel warnings as the kernel typically has tens of open
CVEs, and if we're carrying a kernel explicitly then it's typically an
interim kernel between releases.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Extend jobs-to-kas so the first argument is still the GitLab job name,
but allow further arguments to specify extra Kas files to use in
addition.
Then add a variable EXTRA_KAS_FILES to the CI configuration that
defaults to the empty string and pass this to jobs-to-kas.
This lets specific pipeline runs add extra Kas files, for example to use
experimental branches or enable extra features without touching the CI
directly.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Linux 6.1 will be removed from oe-core master shortly, so whilst we
still have BSPs that use it (specifically, n1sdp) carry a 6.1 recipe in
meta-arm-bsp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since there are no platforms using this version, this reciepe can
be removed.
Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since linux yocto kernel 6.5 is EOL and other layers like
meta-virtualization dropping support for it, it would be
sensible to downgrade the kernel to 6.1 which is a LTS.
This is a temporary change and later we would move to 6.6 when its
officially supported on N1SDP.
This revert the following commits:
* 1fe76c893c
* 21df60b921
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updated to the latest version. Corstone1000 doesn't seem to boot. So,
pull back the old version to meta-arm-bsp for it to use temporarily.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Changes were needed due to the 2.0.0 version not being available for
download at pypi (though listed as the latest version there).
Signed-off-by: Jon Mason <jon.mason@arm.com>
Scripts processing data for the patch ages need correct information in
the relevant fields to determine the age. Create/correct this
information where missing/incorrect.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SHAs for both libmetal and open-amp are intermediate SHAs, which are
only a few patches behind the v2021.04.0 tags. Update to those tags and make
the necessary changes to get them working.
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core master has upgraded from 6.5 to 6.6, but as we have BSPs that
still use 6.5 (corstone1000, n1sdp) we need to carry the recipe. This
should be a short-term measure as 6.5 was EOL in December 2023.
Also, drop the unused 6.4 linux-yocto which was no longer needed since
N1SDP moved to 6.5 with 21df60b.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The tftf tests were getting crashed on the MPS3 and two issues were found
during investigation. This change set provide fix for those issues:
1. The tftf tests were getting crashed on the MPS3 when compiled with
LOG_LEVEL=50. So, reducing the log level and aligning it with the TF-A
allows us to get rid of the crash.
2. Once the above crash got resolved, it has been found that tftf tests
were getting asserted while reading the value of the register
GICD_ITARGETSR. The reason for the crash is that the value of this register
is zero. As per the GIC documentation, this register is RAZ/WI for uniprocessor
implementation and corstone1000 is uniprocessor implementation for FPGA.
So, this change compiles the tftf tests in release mode which allows us
to compile out the assert definitions.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add CI builds for Arm SystemReady Firmware within the fvp-base CI job and a new
Arm SystemReady IR ACS build job. Add the CI kas config for each of these
builds.
The ACS build can be controlled by the ACS_TEST GitLab variable to specify
whether or not to run the testimage. If this variable is not set, the
testimage step will not run. The job tag can be controlled by the ACS_TAG GitLab
variable.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the parted-native dependency explicitly which is needed to
use wic commands.
Also explicitly inherit testimage. This means that the kas config
is no longer required to include it in IMAGE_CLASSES.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update tf-a and mbedtls to the latest versions. Also, migrate the
previous version to meta-arm-bsp for corstone1000.
NOTE: in v2.10, the fiptool makefile was changed to reference LDOPTS
instead of LDLIBS.
NOTE: commit 408cde8a59080ac2caa11c4d99474b2ef09f90df in tf-a modifies
the qemu_sbsa starting offset, and per the commit comment, it requires
the edk2 same change. This is why the edk-platforms SHA has been
changed. There are only 19 patches between the previous SHA and this
one (most of which are adding a single platform). So, it shouldn't be
too impactful to bump the SHA (instead of making it a patch to apply
on top of the existing SHA).
NOTE: tf-a-tests added LDFLAGS to the makefile, causing the need for it
to be removed in the recipe.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that we've released 4.3 and branched, we can switch master CI back
to master.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We enable PAC/BTI out of the box, but all of the pieces (such as gcc and
glibc) need to support it for the final binary to be protected.
Add a minimal test recipe to verify that the "Hello, World" binary is
using PAC/BTI, and add it to oe-selftest.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Readthedocs server requires an absolute path from project's root
directory to find correct requirements.txt and conf.py.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Upgrade the Corstone-1000 YMLs as follows:
- Set the layers SHAs
- Align with Kas v4
- Update the layers list
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Add a note for Capsule update negative test scenario and fixes instructions
regarding distro-boot in Corstone-1000 user guide.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Delane Brandy <delane.brandy@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Adds creating an EFI System Partition for Corstone-1000.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
align the release note with the upcoming CORSTONE1000-2023.11 release
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Use Ethernet over VirtIO on FVP due to lan91c111 Ethernet driver support dropped from U-Boot.
This patch enables virtio-net device in u-boot to pass ACS tests related to
NIC and PXE. The current ethernet device still works in linux kernel and
corstone1000-mps3 Ethernet device is supported by u-boot, so no change is
required regarding existing Ethernet device.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Adds virtio-net configuration to use virtio-net in corstone1000-fvp.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Update the user guide to include Linux distro installation on fvp
Signed-off-by: Delane Brandy <delane.brandy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This fixes a race that is observed rarely in the FVP. It occurs in FVP
when tfm sends the notication ack in openamp, and then reset the access
request which resets the mhu registers before received by the host
processor. It implements the fix both in SE and the host processor openamp
wrapper. This solution enables polling on the status register of mhu until
the notificaiton is read by the host processor. (Inspired by
signal_and_wait_for_signal function in mhu_wrapper_v2_x.c in trusted-firmware-m
https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ext/target/arm/rss/common/native_drivers/mhu_wrapper_v2_x.c#n61)
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade the Arm binary toolchains to the latest version. Of note, the
untarred directory has camelcased the "R" in Rel (which was "rel" in the
previous versions).
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp-base machine uses a v8.4 tune and the FVP itself is configured
to be v8.4, so also tell TF-A to use v8.4.
This is normally done in the TF-A board configuration, but the fvp board
is configurable.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We already tell the FVP to be v8.4 cores, so tell the compiler to
tune for that instruction set too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
@@ -19,6 +19,25 @@ intended for safety-critical applications. Should Your Software or Your Hardware
prove defective, you assume the entire cost of all necessary servicing, repair
or correction.
***********************
Release notes - 2024.06
***********************
Known Issues or Limitations
---------------------------
- Use Ethernet over VirtIO due to lan91c111 Ethernet driver support dropped from U-Boot.
- Due to the performance uplimit of MPS3 FPGA and FVP, some Linux distros like Fedora Rawhide can not boot on Corstone-1000 (i.e. user may experience timeouts or boot hang).
- Corstone-1000 SoC on FVP doesn't have a secure debug peripheral. It does on the MPS3.
- See previous release notes for the known limitations regarding ACS tests.
Platform Support
-----------------
- This software release is tested on Corstone-1000 FPGA version AN550_v2
+SIMD,SVE Registers context/Check that SIMD registers context is preserved
+FF-A Interrupt/Test NS interrupts
+SMMUv3 tests
--
2.34.1
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Luca Fancellu
Jon Mason
Bence Balogh
Harsimran Singh Tungal
Amr Mohamed
Ziad Elhanafy
Ross Burton
Abdellatif El Khlifi
Delane Brandy
Ben Cownley
Ali Can Ozaslan
Emekcan Aras
Drew Reed
Mikko Rapeli
Gyorgy Szing
Adam Johnston
Amr Mohamed
Debbie Martin
Anusmita Dutta Mazumder
Mathieu Poirier
Alexander Sverdlin
Khem Raj
Vincent Stehlé
Vikas Katariya
