Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Keep the knob disabled by default, as it will need
c runtime to provide profiling runtime, which is not
compiled into compiler-rt by default. So it ends up
with build failures e.g.
| aarch64-yoe-linux-ld.lld: error: cannot open /mnt/b/yoe/master/kas-build/tmp/work/cortexa72-yoe-linux/liboauth2/2.2.0/recipe-sysroot/usr/lib/clang/22.1.3/lib/aarch64-yoe-linux/libclang_rt.profile.a: No such file or directory
| aarch64-yoe-linux-clang: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
It has one change over last release
84fa99d3ba
Fixes build errors e.g.
| CMake Error at cmake/VersionFromGit.cmake:59 (message):
| [VersionFromGit] Failed to execute Git: fatal: No names found, cannot
| describe anything.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
The meson_options.txt sets authentication-scheme to 'pam' and
session-manager to 'systemd' by default, which requires libpam
and systemd at build time. Add them to DEPENDS to fix the
configuration failures:
../sources/xfce4-screensaver-4.20.2/meson.build:167:20: ERROR: C shared or static library 'pam' not found
../sources/xfce4-screensaver-4.20.2/meson.build:265:26: ERROR: Dependency "libsystemd" not found, tried pkgconfig
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Changes:
- Drop 0001-Fix-build-with-gcc-15.patch (merged upstream).
- Add 0001-fix-the-hardcoded-legacy-helper-path.patch: replace the
hardcoded "/lib/drbd" path in add_lib_drbd_to_path() with the
build-configured DRBD_LEGACY_LIB_DIR derived from LIBDIR
- Remove sed fixup for the now-absent ocf.ra@.service.
- Install new upstream 50-drbd.preset into systemd system-preset
Signed-off-by: Haiqing Bai <haiqing.bai@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
It has fixes for C23 and Clang-22 added also fixes/workarounds for
libstdc++-14 combinations with different versions of gcc and clang.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
systemd_system_unitdir was accidentally used as the destination for
the user systemd unit, which means it overwrites the system unit.
Correct it to systemd_user_unitdir to fix starting with the system
unit.
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Add a recommendation for a sans serif font to print text on images. But
fswebcam works fine without a font to save only plain images.
Signed-off-by: Jörg Sommer <joerg.sommer@navimatix.de>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Some recipes (like fswebcam) need gd with support of fontconfig to really
work. Otherwise font selection is not that easy.
Signed-off-by: Jörg Sommer <joerg.sommer@navimatix.de>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Running "dlt-example-user 'test'",
Check "dlt-control -j localhost", will not get application description:
APID:LOG-
Expected:
APID:LOG- Test Application for Logging
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
- HTTP/2 support added via the nghttp2 library
(credits to Heiko Zimmermann) — noted as experimental, so
testing carefully before enabling on production servers is
recommended.
- mbed TLS updated from 4.0.0 to 4.1.0.
- ssi-cgi removed — the release notes suggest using
Hiawatha's XSLT support as a more advanced alternative.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Turn color management into packageconfig knob which is turned
off by default as it needs x11 support.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
The build fails because ruli is compiled with -ansi
(which implies C89/C90), but glibc's memchr macro
uses _Generic, a C11 feature. Clang treats this as
an error via -Werror,-Wc11-extensions.
Fixes build with glibc 2.43+
| ruli_conf.c:86:12: error: '_Generic' is a C11 extension [-Werror,-Wc11-extensions]
| 86 | if (!memchr(inbuf, '\0', LOAD_SEARCH_LIST_INBUFSZ))
| | ^
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Drop enforcing -std=c++14 as thats no longer needed
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Set ac_cv_prog_cc_c23=no to prevent autoconf from detecting C23
compiler support, avoiding potential build failures as the package
is not yet fully ported to support C23 standard.
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
libcanberra needs to be compiled with gtk3 and x11 support
otherwise cheese fails to find libcanberra-gtk3 package which
makes it hard depend upon x11
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Upstream now uses a submodule for gdlib, so the build attempts to clone
the submodule over the network and fails. Fix by cloning the submodule
via SRC_URI.
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Add ptest support for jsoncpp to enable automated testing of the
JSON C++ library functionality.
Note:
- Tested on: WRLinux master-wr (based on meta-openembedded master)
- jsoncpp version: 1.9.7
- Unable to test on pure upstream due to poky/meta-oe branch mismatch
Test Result:
root@qemux86-64:~# ptest-runner jsoncpp
START: ptest-runner
2026-04-15T14:04
BEGIN: /usr/lib64/jsoncpp/ptest
PASS: jsoncpp_readerwriter
PASS: jsoncpp_readerwriter_json_checker
PASS: jsoncpp_test
DURATION: 122
END: /usr/lib64/jsoncpp/ptest
2026-04-15T14:06
STOP: ptest-runner
TOTAL: 1 FAIL: 0
Signed-off-by: Zeming LIU <zeming.liu@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Upgrade to release 0.3.100:
- python: Fix compatibility with older python versions
- Add configurable faults for position or velocity tracking error
- Work around a linker warning with newer gcc
- tview: Suppress warnings about importing Axes3D
- moteus_gui: Include registernoop.py in our generated wheel
- Replace setup.py with pyproject.toml for Python package builds
- Use ::isfinite for Arduino compatibility
- Implement support for the RLS Orbis encoder over SPI
Fixes:
WARNING: python3-moteus-0.3.100-r0 do_check_backend: QA Issue:
inherits setuptools3 but has pyproject.toml with setuptools.build_meta,
use the correct class [pep517-backend]
License-Update: Use PKG-INFO
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Upgrade to release 3.0.0:
- Add chord() (map -> reduce) and group() (map) primitives.
- Add timeout (using SIGALRM for process and gevent.Timeout for
greenlet) to control task running time. For threads, unfortunately,
there's no good mechanism so instead APIs for cooperatively
checking timeout are provided on the Task instance.
- Add simple fixed-window rate_limit() for tasks.
- Add Result.is_ready() method for checking result readiness.
- New option for low-latency result fetching, available for RedisHuey.
To use, pass notify_result=True when initializing your Huey instance.
- Add new incr(key, amount=1) to storage API for atomic increment
primitive. This is used by chord().
- Add new wait_result() method to storage APIs for efficiently waiting
for a result to become ready. The default implementation uses the
exponential backoff from the previous implementation of a blocking
Result.get() - so no changes are needed. However if you have a custom
storage implementation, this provides a mechanism for pub/sub or
other notification of result readiness.
- Remove Python 2.x compatibility.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
