J721E SK, AM68 SK and AM69 SK have similar connectivity
for CSI2 RPi connector and the same overlays can be reused,
thus pick the J721E SK CSI2 IMX219, fusion overlay and
AM68 SK V3Link fusion overlay for AM69 SK also.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
J721E SK and AM68 SK have similar connectivity for CSI2 RPi
connector and the same overlays can be reused, thus pick the
J721E SK CSI2 IMX219 and fusion overlays for AM68 SK also.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
J784S4 and J721S2 EVM has similar connectivity for MIPI CSI2
connector and the same overlays can be reused, thus pick the
J721S2 CSI2 OV5640 and J721S2 EVM fusion overlays for J784S4.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump this recipe to add a change to help with GCC 14 compatibility in
the check-cc script used to check compiler flags before use.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump this recipe to add a change to help with GCC 14 compatibility in
the check-cc script used to check compiler flags before use.
Reset this back to the proper branches for kernel 6.1 since this recipe
is only being used in 6.6 bsp providers.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Download and install the cc33xx firmware and binaries
to be used with the cc33xx drivers.
FW Version: 1.7.0.120
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cc33calibrator is a tool provided by TI to manually control the
radio frontend of the cc33xx device. This tool can also be used
for production line testing of the radio.
Documentation for this tool is provided within the following link:
https://www.ti.com/tool/CC33XX-SOFTWARE
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cc33conf is a tool provided by TI to configure
cc33xx WLAN devices. It can be used to change
the RF parameters and other features of the target.
Documentation for this tool is provided within the following link:
https://www.ti.com/tool/CC33XX-SOFTWARE
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Share the most commonality between the recipes, except:
* SRC_URI torvalds vs. linux-next
* SRCREV and PV
* Device Tree list vs. DT prefix
* SUMMARY
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The use of external metadata file to control RTOS binary firmware
integration has been deprecated some time ago. Remove it now.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For our upstream testing flow we have the need to have a "next" BSP for
configuring various settings based on building the latest kernel/uboot.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adjust IMAGE_BOOT_FILES list as next BSP does not support all combinations
of SR1.0, HS-FS and HS-SE variants.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adjust IMAGE_BOOT_FILES list as mainline BSP does not support all combinations
of SR1.0, SR2.0, HS-FS and HS-SE variants.
Suggested-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adjust IMAGE_BOOT_FILES list as BB.org BSP does not support all combinations
of SR1.1, SR2.0, HS-FS and HS-SE variants, same as J721e EVM in mainline.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update am62xxsip-evm machine configuration to support
TI kernel 6.1 & ti-u-boot-2023.04
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As of commit [1] there will be a separate defconfig to build u-boot for
j721e-evm and j721e-sk.
Hence, introduce new yocto machine configs for j721e-sk.
[1]: c9507f07a1
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
MACHINE_KERNEL_PR is a remnant of the early OE days and hasn't been
needed for quite some time. Let's finally remove it completely.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
BeaglePlay gains official support from latest TI lts-6.6 baseline, so set
it as the default. Other Beagle platforms will still use BB.org as default.
And these defaults can still be changed with TI_PREFERRED_BSP setting in a
distro config or by end user in the local.conf
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update all Beagle platform configurations to support multiple BSPs.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adjust IMAGE_BOOT_FILES list as some BSPs do not support all combinations
of SR1.1, SR2.0, HS-FS and HS-SE variants.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This adds a facility to define multiple supported BSPs with their own
preferences for individual components, as well as lets machine configs
specify conditional configurations for different BSPs.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to pick up some new binaries for AM62P. The allocation
patch for Chromium was not included for this device previously.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In order to be able to switch between different kernel providers, as well
as different versions of kernel LTS (e.g. 6.1 vs. 6.6), let's re-organize
Device Tree lists as follows:
* Move all Beagle-specific DTBs and overlays into corresponding linux-bb.org
recipe for now, to be used when building beagleboard.org baseline
* Update KERNEL_DEVICETREE in the machine configs to only list what already
exists in the upstream/mainline kernel
* Update KERNEL_DEVICETREE_PREFIX to match the list when building TI baseline
With this change it is now very easy to switch the kernel between providers
supported by meta-ti - linux-ti-mainline, linux-ti-staging and linux-bb.org
Please note that 6.6 LTS has moved to "vendored" device tree layout even for
32-bit platforms, while BB.org still uses 6.1 LTS and flat DT layout.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lift the common parts of the top level gitignore from oe-core and
meta-openembedded. This masks out temporary python files, intermediate
artifacts, and unclean patch leftovers (.orig, .rej, etc).
We're choosing to leave patches at the root of the project out of this
as maintainer preference.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As of commit [1] there will be a separate defconfig to build u-boot
for j721s2-evm and am68-sk.
Hence, introduce new yocto machine configs for am68-sk. This is done
through a new am68.inc file as the am68-sk platform does not support GP.
So j721s2-evm.inc is copied to am68.inc and updated accordingly.
[1]: a96be9b8c0
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A newly enabled check in master is causing errors with this package:
ERROR: QA Issue: Architecture did not match (ARM, expected x86-64)
Adding arch to the INSANE_SKIP variable disables that check for this
recipe.
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
One of the changes in gcc v14 is making implicit-function-declaration an
error. For some older software packages the easiest fix is to add
-fpermissive to the compile line.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to pick up rebuilt binaries. Upstream release notes:
Regenerate all binaries with a fix for exportable buffer allocations
that should improve Chromium compatibility.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Update linux-bb.org to 6.1.80 for both 32 and 64 bit platforms
* Update DTB/DTBO lists to include latest renames and additions
* Re-enable vendored DTB layout by default
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update all of the optee components to the upstream 4.2.0 version.
While at it, remove the patches and fixups which are not needed anymore.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that are past the inital stages of our LTS migration, we can remove
the DEFAULT_PREFERENCE settings that prevented these recipes from being
the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While we are working to finish our kernel migration 6.6, we are falling
aback to software rendering for platforms that do not currently have a
solution for GPU drivers (namely the boards that use SGX).
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This has been accepted to oe-core and is available in scarthgap and newer.
This reverts commit e9a56223ed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
New features added require another increase to max_leb_cnt.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add a recipe for mesa-pvr to use a newer branch based on mesa 23.2.1.
This branch does not currently contain SGX patches so it is also being
masked by the ltsprep branding to prevent regressing those devices
currently.
Please note that may run into sstate errors when switching to or away
from the ltsprep tag. Please issue a clean to mesa and
ti-img-rogue-umlibs if you get warnings from either package's
do_create_runtime_spdx step.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Locally overlay verbatim copies of mesa 22.3.5 patches from
oe-core/master, so we get whatever QoL patches from core relevant to the
current release.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Recipes for DDK 24.1, but lock them behind ltsprep tags because they
require device tree changes that do not work on the current default
kernel for this layer.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Reusing the j784s4.inc file presents problems as the am69-sk platform
does not support GP. So copy the j784s4.inc to am69.inc and update
accordingly.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently, the 6.1 kernel is the default. Removing the k3-am69-sk dtb
file only applies to the 6.6 kernel. Restoring this entry so that
current builds work until such time as the 6.1 kernel is removed from
the recipes.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upstream driver expects Wave5 firmware to be named "wave521c_k3_codec_fw.bin".
Driver probe fails because this compatible isn't being found.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Separate FAT boot partition holds SPL, SYSFW and U-boot images, while
rootfs places kernel images and DTBs into /boot directory. So it is not
desirable to mount boot FAT partition into /boot directory of the rootfs
and shadow its original content - adjust corresponding entry in wic
templates.
While at it, remove unused ondisk parameter when using use-uuid, which
takes precedence and is more flexible.
Note: boot FAT partition will be automounted at /run/media/boot-mmcblk0p1/
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The new kernel directory stucture for the DTBs is causing problems when
assembing the image files. It produces errors like this:
output: install: cannot stat 'deploy-ti/images/XXXX-evm/omap/XXXX.dtb': No such file or directory
or
output: install: cannot stat 'deploy-ti/images/XXXX-evm/ti/omap/XXXX.dtb': No such file or directory
The issue comes from the UBOOT_EXTLINUX_BOOT_FILES list. am57 already
had a mechanism but it was missing the omap/ dir to remove, and am33 and
am43 were just takeing KERNEL_DEVICETREE directly. This patch fixes
both cases.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We missed that the KERNEL_DEVICETREE should have been updated for the
32bit platforms with the change in linux-ti-mainline to v6.6. The new
directory structure under arch/arm/boot/dts is in effect for that
version.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This upgrade contains the following changes:
* updated hostapd path in ap_start.sh
* ap_stop.sh removes wlan1 interface
* hostapd.conf updated to work seamlessly with hostapd 2.10
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
It is useful to have U-boot initial environment deployed for future
reference or to initialize environment files as part of the build.
In multiconfig setup, such as TI K3 platforms, building U-boot
multiple times for Cortex-R5 and Cortex-A53 cores results in file
conflicts when deploying under the same name. To avoid that, those
initial-env files were removed at the end of the do_deploy task.
But it is better to only remove them for k3r5 multiconfig, since
that only builds SPL and saved env doesn't make much sense, but
preserve and deploy initial-env for the main machine multiconfig.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In an attempt to try and better support non-LTS branches, we need to do
a better job at not removing temporary patches too soon from master.
This TODO file should allow us to better schedule the time when the
patches can be safely removed.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add recipe for yamllint. There is an upcoming change in u-boot where
the binman tool is now configured to call yamllint to verify the configs
during compile time.
There was a previous patch a year ago from Trevor Woerner that never
made it into oe-core. This patch is a reworking of his patch but
pointing to a newer version.
We are waiting on this patch to be accepted in oe-core. Once it is
available on master we will remove this recipe to avoid conflict.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Our CICD script inadvertently added the SRCPV back into the recipes.
The script has been fixed, so removing the variable once again.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
New features added require another increase to max_leb_cnt.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set the KERNEL_DEVICETREE_PREFIX so that, when using the various TI
kernel recipes, the "correct" DTB files are pulled in depending on what
is available in that kernel source.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
am69 and am68 sk boards supports V3Link cameras interfaced via V3Link
camera fusion board. Refer to
commit b7a97b1b (conf: machine: am62axx: Pick overlays for V3Link cameras)
for details
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
j722s-evm supports capture from fpdlink cams via fpdlink fusion1 board
or V3Link camera fusion board. So package fpdlink camera overlays
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Like the current TI-RTOS/MCU+ firmware, this is a prebuilt example
firmware for TI K3 remote cores. It is an alternative to the echo test
demo currently provided by "ti-rtos-firmware" recipe. In addition to
supporting rpmsg_client_sample just as the current firmware does, it
also provides:
* A serial console with shell on the MCU UART port
* A console over RPMSG at /dev/ttyRPMSG0
* Example usage of the MCU GPIO/I2C/SPI from this shell
* And many other Zephyr default enabled features..
It does all this using the Zephyr RTOS, a scalable real-time operating
system, optimized for resource constrained devices, and built with
security in mind. Zephyr is a Linux Foundation project. For more
info see here[0][1].
Zephyr firmware like this can also be built as part of the Yocto build
using meta-zephyr. Although this is a prebuilt currently, we intend
to build this from source to reduce meta-ti's dependence on firmware
blobs.
This currently works with the AM62 M4F. Support for additional SoCs
and cores is in progress.
[0] https://www.zephyrproject.org/
[1] https://docs.zephyrproject.org/latest/introduction/index.html
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for jailhouse recipe which will add changes for Out of Box
demo and also a new application to test whether the linux inmate cell has
crashed or not.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Latest ti-u-boot will be supporting HSSE1.0 and HSFS1.0 versions of the
j7200 soc through the binman dts nodes. Add support in yocto to package
the created binaries in the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Latest ti-u-boot will be supporting HSSE2.0 and HSFS1.1 versions of the
j721e soc through the binman dts nodes. Add support in yocto to package
the created binaries in the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We have a request to be able to override the beagle kernel set in
PREFERRED_PROVIDER_virtual/kernel, but it is being absolutely set and
not loosely set with ?=. Take this time to create a central include for
all beagle boards like we have for the k3.inc.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This firmware is named so that the correct firmware is chosen on each
machine. No need to split this package for each machine, combine them
into one non-machine-specific package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for different machines and versions are named differently so
there is no need to have machine specific packages for each of these
firmwares. Move all the PRU-Switch firmwares into single package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for different machines and versions are named differently so
there is no need to have machine specific packages for each of these
firmwares. Move all the PRU-HSR firmwares into single package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for different machines and versions are named differently so
there is no need to have machine specific packages for each of these
firmwares. Move all the PRU-ETH firmwares into single package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Most firmware does not run on the host and is therefor not architecture
specific, at least as far as the package manager is concerned. Although
the firmware might not be useful on some machines, the package itself
is not machine specific. Remove PACKAGE_ARCH.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update from 0.6.4 to 0.6.6.
This update brings the following fixes from ti-rpmsg-char repo.
55a6f40 remove ti.ipc4.ping-pong reference
8892e57 lib: fix data type build warnings
7c2ab48 lib: fix build warnings
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The new V3Link camera fusion board [1] comes with a CSI to FPDLink
serializer board, which allows interfacing multiple 22-pin FFC
compatible sensors with SK-AM62A.
Currently overlays for interfacing IMX219 sensor with V3Link are built
as part of the TI linux kernel, so pick these in the BSP filesystem.
[1]: https://www.arducam.com/fpd-link-3-cameras/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Stop using UBOOT_LOCALVERSION, and copy what is done in the kernel recipe. This
allows us to set the correct SHA into the version string even if AUTOREV is used
since SRCPV is no longer set in oe-core.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The use of KERNEL_LOCALVERSION for controlling the kernel version has
changed recently. Placing the value of KERNEL_LOCALVERSION in
.scmversion was causing it to duplicate the string in the final version.
Instead, drop KERNEL_LOCALVERSION to just identify that it comes from
TI, and that it is an RT kernel. Additionally, place the commit sha for
the kernel into the .scmversion file explicitly to be both backward and
forward compatible.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch moves the jailhouse recipe general variables to a
ti-jailhouse.inc file along with fetch and compile task.
Jailhouse repo also contains some demo applications which can
be packaged alone in filesytem and does not require packaging
jailhouse module, firmware and tool.
So add a new recipe jailhouse-inmate which can be used to only
package those demos. The existing jailhouse recipe will contain
variables and other dependencies needed for do_install task for
jailhouse module, tools, demos etc. The do_install of jailhouse
inmate recipe will only package demo applications.
This new recipe(jailhouse-inmate) will be added to a new image
in meta-arago. The new image will be used for jailhouse second
linux instance or cell.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Update linux-bb.org to 6.1.69 for both 32 and 64 bit platforms
* Update u-boot-bb.org to the latest 2023.04 based on SDK 9.1 release
* Update DTB/DTBO lists to include latest renames and additions
Note: all changes are in a single commit for bisectability
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upstream now includes all DTB/DTBO files recursively, no need to extend
corresponding FILES list.
Revert "linux-bb.org: also package DT overlays in separate dir"
This reverts commit f22ea63f66.
Note: adjust SRC_URI cosmetically, so it now matches kirkstone
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The current master has the support for power off functionality, update
to that.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update all OP-TEE components to 4.1 tag. OP-TEE examples are already in
4.1 tag.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Switch the branches to the new LTS names. These are still experimental,
hence the isolation from kirkstone.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The "upstream" is not maintained, but this is an easy patch to get this
working again. Still need to watch this for big breakages and rethink
supporting this recipe at that time.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add TI logo image as bootsplash image file for AM62P and install it in
boot directory from where u-boot can read from and display during
boot-up time.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In preperation of LTS migration, switching from 2024.01 to 2024.04 for
u-boot as this is close to what will be the final version for LTS.
Default preference is still kept as low for this version since we are in
early migration phase.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Migrate to version 23.3.6512818, this includes the stability updates
released in 23.2 as well as some additional modifications to help with
userspace application support, namely Chromium.
We're also dropping the x11 window system extensions from the Vulkan
libraries for now. Ideally, both x11 and wayland extensions will be
provided by mesa's vulkan-wsi-layer in the future, but currently x11
isn't supported and this just added extra complexity to the package in
Yocto.
Signed-off-by: Randolph Sapp <rs@ti.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to include some useful patches that:
- Fix the ROGUE segfault issue introduced by SGX (this was what
the old conditional logic was addressing)
- Fix destruction of event queue with proxies still attached
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
If Yocto even sees a "-dev" package in the PACKAGES string it will
automatically forward all dev-so links to that package. Remove that
entry from the PACKAGES string so we get the required links again.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras for am62xx-lp to control the kernel and u-boot
repos, branches, and srcrevs via the TI_EXTRAS variable in the local.conf
file.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that 2024.01 is official, the logo that am62xx-evm installs is
available in all versions of the repo that we point to. Move all of
that code out of the .bb files and into the u-boot-ti.inc file.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump SRCREV to include the following changes in UM and KM:
- Rebuild all releases with external memory wrap disabled due to
some incompatibility with certain Qt use cases.
- Add a watchdog change that prevents an occasional false
timeout when servicing long DM processes.
- Rely on snooping to perform certain cache operations and
results in decreased overhead for device -> cpu
communications.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A patch has been accepted in mainline u-boot that has binman calling
yamllint to verify the configs during compile. This means that the
yamllint must be available as a tool at the time.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add recipe for yamllint. There is an upcoming change in u-boot where
the binman tool is now configured to call yamllint to verify the configs
during compile time.
There was a previous patch a year ago from Trevor Woerner that never
made it into oe-core. This patch is a reworking of his patch but
pointing to a newer version.
We are waiting on this patch to be accepted in oe-core. Once it is
available on master we will remove this recipe to avoid conflict.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
j722s is same GPU as am62p, need to add this into machine definition so
that Rogue driver gets included in the image.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fetch from the latest commit which has J722S support now.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove config files from /usr/share/jailhouse as they are not required.
Package only the cell files for respective devices and not all k3 files.
Update FILES:PN to use wildcard.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
RPM does not accept '-' as a character in the PR/version and fails with:
| error: line 4: Illegal char '-' (0x2d) in: Release: sgxrgx-54fd9d7dea098b6f11c2a244b0c6763dc8c5690c.1
The correct approach is to reference SRCPV and not SRCREV and also add it
to PV and not PR. But PV is used in the branch to fetch the sources and
cannot be modified, so use SRCPV in PR w/o any illegal characters.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With the current implemetation is not possible to remove the '-k3r5'
customization using overrides like below and the '-k3r5' always stay there.
| TMPDIR:remove:k3r5 = "-k3r5"
| or
| TMPDIR:k3r5 = "${TOPDIR}/tmp"
This patch allows to build the core-image-minimal in oe-core master/nanbield
without any issue on a common TMPDIR folder just using the following:
| TI_COMMON_DEPLOY = "${DEPLOY_DIR}"
| TI_TMPDIR_APPEND = ""
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are preparing to migrate our uboot version to 2024.01. As we are still
working on the migration, mark the default preference low for this
version. We will enable building with this uboot in a meta-arago brand
in the near future. Once the migration is complete, we will remove the
2023.04 uboot and make this the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are preparing to migrate our kernel version to 6.6. As we are still
working on the migration, mark the default preference low for this
version. We will enable building with this kernel in a meta-arago brand
in the near future. Once the migration is complete, we will remove the
6.1 kernel and make this the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the BB.org kernel to the latest. Also update BeaglePlay device
tree list, as there were some renames and new additions.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit [1] created a common LPM wkup sources overlay and removes
k3-am62x-sk-mcu-gpio-wakeup.dtso for am62 device family.
k3-am62x-sk prefix picks this overlay for am62xx, am62axx and am62xxsip already.
This patch picks the necessary overlay for am62xx-lp-evm since it doesnt use
the same prefix as other am62 platforms.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=4ba1886b886d
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for ti-jailhouse. All the patches which was being applied via yocto
have been moved to ti-jailhouse repo now. So remove the patches from SRC_URI and
files.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras for am62pxx to control the kernel and u-boot
repos, branches, and srcrevs via the TI_EXTRAS variable in the local.conf
file.
Also add am62pxx as compatble machine in jailhouse recipe. So the am62pxx
jailhouse build can be done by adding TI_EXTRAS=tie-jailhouse in local.conf.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A bug was introduced while trying to unify the Mesa version that is used
on SGX GPU's and Rogue GPU's. It manifests itself as an immediate segfault
whenever you try and run something like glmark2-es2-wayland or
weston-simple-egl on certain Rogue based platforms (specifically am62x).
Use different srcrev for Rogue GPU and SGX GPU platforms. The SGX GPU platforms
will use the latest commit. Rogue GPU platforms will use the last good working
commit before SGX related changes were introduced.
This change will be reverted once the issue is rootcaused and a common solution
is found for both Rogue and SGX based GPU platforms.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade to v6.3.0 version.
This release adds resources for using AM243x & AM64x PRU cores with cores
running FreeRTOS:
* The RTOS Getting Started Labs
* Examples for using PRU GPIO and the broadside interface
* SORTE_G example (a custom networking interface)
Bug fixes:
* AM64x & AM65x header files, fix the names of extended sections to be in the
format of
ConstantsTableName_0x100
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This k3r5 multiconfig builds baremetal components (and corresponding native,
nativesdk and cross tools) and sets TCLIBC accordingly to "baremetal". The
expectation is that those components and tools will use a separate TMPDIR
to isolate from the main Linux build that uses "glibc" TCLIBC and to avoid
potential conflicts.
OE-Core "nodistro" default configuration already sets TCLIBCAPPEND facility
to automatically add a suffix to TMPDIR, resulting in "tmp-baremetal" temp
directory for this multiconfig and "tmp-glibc" for the main Linux one. Other
distros like Arago follow this convention and even extend a bit (e.g. Arago
also adds TCMODE suffix to TMPDIR for external toolchain support separation).
But Poky (and derivative distros, like AGL or YoE) disable TCLIBCAPPEND and
result in a combined TMPDIR, leading to potential conflicts, such as:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=15273
And that's just the beginning, there were other conflicts observed later in
the build, e.g. during nativesdk builds - that's why we also set a unique
SDKPKGSUFFIX here.
To force a separate TMPDIR for k3r5 multiconfig, we have to directly append
a suffix to it. Multiple other options were tested in hopes of making it
slightly cleaner, but they either didn't work or were dismissed. For example,
trying to override TCLIBCAPPEND getting cleared by a distro would require
using a machine/soc-override, which doesn't have enough scope (nativesdk)
or forcing it with :forcevariable would also change the main Linux TMPDIR
and affect existing CI flows. Also, using TCLIBC itself as a suffix to add
to TMPDIR may result in getting it appended twice (tmp-baremetal-baremetal)
when normal TCLIBCAPPEND facility is used. Hence the least invasive/confusing
option is to always append "-k3r5" suffix to this multiconfig TMPDIR. That
results in "tmp-k3r5" in Poky (leaving main TMPDIR as "tmp"), while OE-Core
"nodistro" and Arago would end up with "tmp-baremetal-k3r5" (and "tmp-glibc"
for the main).
Also note, meta-ti-bsp layer.conf sets up images and sdks to be deployed
into a common location outside of TMPDIRs, but TI_COMMON_DEPLOY variable
that controls it is set weakly, allowing to be modified from a distro
configuration or local.conf. It means that all images and sdks can be
deployed into the main TMPDIR if one's CI flow expects tmp/deploy/ as
the final destination, by using := for immediate variable expansion:
TI_COMMON_DEPLOY := "${TMPDIR}/deploy"
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit [1] renamed the MCU GPIO wakeup overlay as k3-am62x-sk-mcu-gpio-wakeup.dtbo
k3-am62x-sk prefix picks this overlay for am62xx, am62axx and am62xxsip already.
This patch picks the necessary overlay for am62xx-lp-evm since it doesnt use
the same prefix as other am62 platforms.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=24bd6ce832cd
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This was a temporary class to help with the v5.10 to v6.1 kernel
migration, now that we have completed that, remove this class.
Suggested-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We support Linux v6.1 as our official version for Kirkstone. The older
kernel version was kept around during the transition to the newer version,
but we are past that now. Remove this old version.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SRCREV is auto updated, but the PV still uses the old tag version,
update this to v0.3.
While here, we also now have a proper LICENSE file, use that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit f5851386 ("conf: machine: am62*: Pick common overlays by prefix")
picks common HDMI and CSI overlays for am62 platform variants.
Adding capability to extend the same prefix for common overlays for applicable
am62 platforms in more generic way to include new mcan overlays added [1]
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=3b01c392627f
given the differences in SK-AM62-LP containing B2B HDMI Samtec connector,
just added the kernel prefix to pick common mcan overlay.
for am62pxx: It has 4 MCANs vs all other am62xx devices have 3 MCANs,
hence keeping this prefix seperate for am62pxx to pick right overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are all useful for firmware recipes but some recipes did not have
them. For firmware including ti-linux-fw.inc let's add these all to
one spot and remove them from any recipe that did already have these.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These defines are specific to a SoC, not any specific board. Move these
to the SoC level for these boards to be consistent with boards already
doing this correctly.
J7200 didn't have these at all, add them while we are here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The common include ti-linux-fw.inc already includes setting this, no need
to set it in each recipe, remove that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is no compilation in this simple firmware recipe, no need for
these lines, remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are common for all recipes that include ti-linux-fw.inc, add
it to this include file and remove from each recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras features for rt as it was added for non
rt kernel and u-boot earlier. It will also be accessible via the
TI_EXTRAS variable in the local.conf file.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Don't try to locate TI-TFL license within meta-ti-bsp relative to OE-Core
using COREBASE, as the directory structure of the layers is not guaranteed.
Instead, point to it relative to the recipe itself.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Minor rework of the TI include files used to override both SRCREV and
other settings in the optee recipes for TI SOC parts. The intent is to
make it more clear when we are changing SRCREVs versus changing other
items, and allow for sharing the SRCREV changes for optee-os-tadevkit
which should track the optee-os SRCREV.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to latest commit for both u-boot and linux
extras. Also update SRCREV for jailhouse branch for both psdk
linux and u-boot.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The previous allowance for overriding the value for the kernel is
incorrect. The kernel should not be changed from linux-dummy for the
k3r5 multiconfigs.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is a build error under master that is not present in kirkstone
related to .SECONDARY/.NOTINTERMEDIATE being set differently between the
ti-img-rogue-driver repo and the kernel. The long term solution to
allow this code to be built on both kirkstone/master is being
investigated. In the meantime, this patch gets things building on
master.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move to the 23.2 release branch and bump SRCREV accordingly. This branch
has the proper implementation of the cache coherency fix along with some
other checks that address some system stability issues on Jacinto
devices.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump SRCREV to include some patches to better isolate SGX and PVR
components.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Instead of making kernel RDEPENDS on devicetree and different FW images with
lots of machine-override appends that are hard to modify downstream, use proper
MACHINE_ESSENTIAL_EXTRA_RDEPENDS and MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS vars
that are specifically designed for this purpose.
This also makes such dependencies generic and not tied to a particular kernel
recipe including kernel-rdepends.inc with the entire machine-specific list.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS per platform to list recommended
essential FW images to be added to rootfs by default.
Correct beagle-x15 to pull devicetrees and kernel image as well.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Majority of Beagle devices use ti-u-boot repo from u-boot-ti-staging directly.
But some latest devices may need to point to own tree with additional support
added that is not yet upstream, e.g. BeaglePlay.
Add the Beagle-specific recipe and point beagleplay to use it. Other devices
can switch to using it as well, if desired, but right now the code base is the
same for other Beagle devices.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update both 32-bit and 64-bit configs to use the latest 6.1 Linux kernel
from beagleboard.org repository, which is based on ti-linux-kernel repo
used in linux-ti-staging, but with extra Beagle-specific features on top.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update DTB/DTBO list to only upstreamed devicetrees and overlays. This
help with migration to kernel 6.1, which doesn't have BB.org specific
overlays.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update DTB/DTBO list to only upstreamed devicetrees and overlays. This
help with migration to kernel 6.1, which doesn't have BB.org specific
overlays.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since the introduction of TI_COMMON_DEPLOY, we've been seeing frequent
Pseudo errors [1] breaking image build during development, in particular
with partial rebuilds due to the externalsrc bbclass.
The relevant part of the error log seems to be the following:
ERROR: Task (/home/schifferm/Devel/src/ci-meta-tq-kirkstone/sources/meta
-tq/meta-dumpling/recipes-images/images/tq-image-generic-debug.bb:do
_rootfs) failed with exit code '1'
Pseudo log:
path mismatch [1 link]: ino 12215614 db '/home/schifferm/Devel/src/ci-me
ta-tq-kirkstone/build-mba64xx/deploy-ti/images/tqma64xxl-mbax4xxl/tq
-image-generic-debug-tqma64xxl-mbax4xxl-20231020091917.testdata.json
' req '/home/schifferm/Devel/src/ci-meta-tq-kirkstone/build-mba64xx/
tmp/work/tqma64xxl_mbax4xxl-tq-linux/tq-image-generic-debug/1.0-r0/r
ootfs/usr/share/stress-ng/example-jobs/device.job;65324e26'.
My understanding is that all deploy dirs should be ignored by Pseudo, as
openembedded-core/meta/bitbake.conf includes the whole of DEPLOY_DIR in
PSEUDO_IGNORE_PATHS. With the introduction of TI_COMMON_DEPLOY,
DEPLOY_DIR_IMAGE is not covered by that setting anymore, so we add it in
meta-ti to avoid the issue.
[1] https://wiki.yoctoproject.org/wiki/Pseudo_Abort
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to include the required changes to build for SGX now.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump ti-sgx-ddk-um and ti-sgx-ddk-km to the new branch for Kirkstone and
mesa independent builds. This also sets up SGX to use the latest mesa
revision rogue uses.
Changelog:
- IMG Support has officially ended. This repo will not be getting
regular updates after this unless things are really broken.
- The Mesa patches which were previously being relicensed internally
were opened and combined with the unofficial rogue efforts on
freedesktop.
- Toolchains were upgraded and multiple warnings and issues were
addressed. Hardware recoveries work now, but there are still some
longstanding issues with SGX that remain to be addressed if further
resources are set aside for that.
- We moved to an lws-generic build target to avoid rebuilding external
components. As such, these external components must be patched as
needed. Libdrm is an example of this and the required patches can be
found in meta-ti.
Known bugs:
- Buffer allocations under Weston may misbehave
- GLSL macro redefinitions will cause errors regardless of whether or
not they are identical
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Makes ti-ipc firmware as default for main-r5f0_0 firmware softlink
The ti-eth-fw binaries are tested at the SDK level and should be
made default only at that level
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The main-r5f0_0 softlinks should be pointing to the ethfw binaries
instead of the mcu-r5f0_0
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit cd13cafd65.
Some devices need ti-fs-stub-* firmware for the uboot aarch64 build
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Revert ebcf15bf0f :
"recipes-bsp:ti-sci-fw: Add k3r5 as COMPATIBLE_MACHINE"
Extend recipe to k3 machines too, to provide ti-fs-stub-* firmware
for u-boot aarch64 build.
Update do_deploy() to allow multiconfig builds for k3 machines
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fixes the QA warnings about package contains reference to TMPDIR.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently the do_compile step fails if we try to implement UBOOT_CONFIG
in an attempt to build U-Boot with multiple R5 defconfigs.
This commit adds a condition to handle linking the UBOOT_BINARY if
UBOOT_CONFIG is used in place of UBOOT_MACHINE.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
2023-10-11 15:28:15 -05:00
193 changed files with 1913 additions and 1930 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
