ti-ipc-rtos: fix omapl138 update-alternatives missing parameter

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README

@@ -8,13 +8,7 @@ This layer depends on:
 
 URI: git://git.openembedded.org/openembedded-core
 layers: meta
-branch: master
-
-
-When not depending on meta-openembedded and not using systemd, you may need to
-mask few miscellaneous recipes requiring systemd, by adding this to local.conf:
-
-BBMASK = "meta-ti/recipes-misc"
+branch: morty
 
 
 The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
@@ -25,6 +19,7 @@ Please follow the recommended setup procedures of your OE distribution.
 
 
 Send pull requests, patches, comments or questions to meta-ti@yoctoproject.org
+Please note - meta-ti mailing list requires subscription for posting:
+https://lists.yoctoproject.org/listinfo/meta-ti
 
 Maintainers: Denys Dmytriyenko <denys@ti.com>
-             Koen Kooi <koen@dominion.thruhere.net>

classes/sdcard_image.bbclass

@@ -1,156 +0,0 @@
-inherit image
-
-# Add the fstypes we need
-IMAGE_FSTYPES_append = " tar.bz2 sdimg"
-
-# Ensure required utilities are present
-IMAGE_DEPENDS_sdimg = "genext2fs-native e2fsprogs-native"
-
-# Change this to match your host distro
-LOSETUP ?= "/sbin/losetup"
-
-# Since these need to go in /etc/fstab we can hardcode them
-# Since the vars are weakly assigned, you can override them from your local.conf
-LOOPDEV ?= "/dev/loop1"
-LOOPDEV_BOOT ?= "/dev/loop2"
-LOOPDEV_FS ?= "/dev/loop3"
-
-# Default to 4GiB images
-SDIMG_SIZE ?= "444" 
-
-# FS type for rootfs
-ROOTFSTYPE ?= "ext4"
-
-BOOTPARTNAME_beaglebone = "BEAGLE_BONE"
-BOOTPARTNAME ?= "${MACHINE}"
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
-# Files and/or directories to be copied into the vfat partition
-FATPAYLOAD ?= ""
-
-IMAGE_CMD_sdimg () {
-	SDIMG=${WORKDIR}/sd.img
-
-	# sanity check fstab entry for boot partition mounting
-	if [ "x$(cat /etc/fstab | grep ${LOOPDEV_BOOT} | grep ${WORKDIR}/tmp-mnt-boot | grep user || true)" = "x" ]; then
-		echo "/etc/fstab entries need to be created with the user flag for the loop devices like:"
-		echo "${LOOPDEV_BOOT} ${WORKDIR}/tmp-mnt-boot vfat user 0 0"
-        false
-	fi
-
-	# cleanup loops
-	for loop in ${LOOPDEV} ${LOOPDEV_BOOT} ${LOOPDEV_FS} ; do
-		${LOSETUP} -d $loop || true
-	done
-
-	# If an SD image is already present, reuse and reformat it
-	if [ ! -e ${SDIMG} ] ; then
-		dd if=/dev/zero of=${SDIMG} bs=$(echo '255 * 63 * 512' | bc) count=${SDIMG_SIZE}
-	fi
-
-	${LOSETUP} ${LOOPDEV} ${SDIMG}
-
-	# Create partition table
-	dd if=/dev/zero of=${LOOPDEV} bs=1024 count=1024
-	SIZE=$(/sbin/fdisk -l ${LOOPDEV} | grep Disk | grep bytes | awk '{print $5}')
-	CYLINDERS=$(echo $SIZE/255/63/512 | bc)
-	{
-	echo ,9,0x0C,*
-	echo ,,,-
-	} | /sbin/sfdisk -D -H 255 -S 63 -C ${CYLINDERS} ${LOOPDEV}
-
-	# Prepare loop devices for boot and filesystem partitions
-	BOOT_OFFSET=32256
-	FS_OFFSET_SECT=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /"|cut -d " " -f 2)
-	FS_OFFSET=$(echo "$FS_OFFSET_SECT * 512" | bc)
-	FS_SIZE_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /g" \ 
-	|cut -d " " -f 4 | cut -d "+" -f 1)
- 
-	LOOPDEV_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep FAT | perl -p -i -e "s/\s+/ /g"|cut -d " " -f 5)
-	LOOPDEV_BYTES=$(echo "$LOOPDEV_BLOCKS * 1024" | bc)
-
-	${LOSETUP} -d ${LOOPDEV}
-
-	${LOSETUP} ${LOOPDEV_BOOT} ${SDIMG} -o ${BOOT_OFFSET} 
-
-	/sbin/mkfs.vfat ${LOOPDEV_BOOT} -n ${BOOTPARTNAME} $LOOPDEV_BLOCKS
-
-	# Prepare filesystem partition
-	# Copy ubi used by flashing scripts
-	if [ -e  ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ] ; then
-		echo "Copying UBIFS image to file system"
-		cp ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${IMAGE_ROOTFS}/boot/fs.ubi
-	fi
-
-	# Prepare boot partion. First mount the boot partition, and copy the boot loader and supporting files
-	# from the root filesystem
-
-	mkdir -p ${WORKDIR}/tmp-mnt-boot
-	mount $LOOPDEV_BOOT ${WORKDIR}/tmp-mnt-boot
-
-	echo "Copying bootloaders into the boot partition"
-	if [ -e ${IMAGE_ROOTFS}/boot/MLO ] ; then
-		cp -v ${IMAGE_ROOTFS}/boot/MLO ${WORKDIR}/tmp-mnt-boot 
-	else
-		cp -v ${DEPLOY_DIR_IMAGE}/MLO ${WORKDIR}/tmp-mnt-boot
-	fi
-
-	# Check for u-boot SPL
-	if [ -e ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ] ; then
-		suffix=img
-	else
-		suffix=bin
-	fi
-
-	cp -v ${IMAGE_ROOTFS}/boot/uEnv.txt ${WORKDIR}/tmp-mnt-boot || true
-	cp -v ${IMAGE_ROOTFS}/boot/user.txt ${WORKDIR}/tmp-mnt-boot || true
-	cp -v ${IMAGE_ROOTFS}/boot/uImage ${WORKDIR}/tmp-mnt-boot || true
-
-	if [ -e ${IMAGE_ROOTFS}/boot/u-boot.$suffix ] ; then
-		cp -v ${IMAGE_ROOTFS}/boot/{u-boot.$suffix} ${WORKDIR}/tmp-mnt-boot || true
-	else
-		cp -v ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.$suffix ${WORKDIR}/tmp-mnt-boot/u-boot.$suffix 
-	fi
-
-	if [ -n ${FATPAYLOAD} ] ; then
-		echo "Copying payload into VFAT"
-		for entry in ${FATPAYLOAD} ; do
-				# add the || true to stop aborting on vfat issues like not supporting .~lock files
-				cp -av ${IMAGE_ROOTFS}$entry ${WORKDIR}/tmp-mnt-boot || true
-		done
-	fi
-
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${IMAGE_ROOTFS}/etc/image-version-info
-
-	# Cleanup VFAT mount
-	echo "Cleaning up VFAT mount"
-	umount ${WORKDIR}/tmp-mnt-boot
-	${LOSETUP} -d ${LOOPDEV_BOOT} || true
-
-	# Prepare rootfs parition
-	echo "Creating rootfs loopback"
-	${LOSETUP} ${LOOPDEV_FS} ${SDIMG} -o ${FS_OFFSET}
-
-	FS_NUM_INODES=$(echo $FS_SIZE_BLOCKS / 4 | bc)
-
-	case "${ROOTFSTYPE}" in
-		ext3)
-				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
-				tune2fs -L ${IMAGE_NAME} -j ${LOOPDEV_FS}
-				;;
-		ext4)
-				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
-				tune2fs -L ${IMAGE_NAME} -j -O extents,uninit_bg,dir_index ${LOOPDEV_FS}
-				;;
-		*)
-				echo "Please set ROOTFSTYPE to something supported"
-				exit 1
-				;;
-	esac
-
-	${LOSETUP} -d ${LOOPDEV_FS} || true
-
-	gzip -c ${WORKDIR}/sd.img > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-${IMAGEDATESTAMP}.img.gz
-	rm -f ${WORKDIR}/sd.img
-}

classes/ti-pdk.bbclass

@@ -0,0 +1,101 @@
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+inherit perlnative
+
+DEPENDS = "ti-xdctools ti-cg-xml-native ti-sysbios common-csl-ip-rtos libxml-simple-perl-native gcc-arm-none-eabi-native ti-cgt6x-native ti-pdk-build-rtos"
+
+DEPENDS_append_omap-a15 = " ti-cgt-arm-native"
+DEPENDS_remove_ti33x = "ti-cgt6x-native"
+DEPENDS_remove_ti43x = "ti-cgt6x-native"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+
+# HTML hyperlink text
+PDK_COMP_LINK_TEXT ?= ""
+
+DOC_FILE = "API_Documentation_${PN}.html"
+
+create_doc_link () {
+    PDK_COMP_DIR=`get_build_dir_bash`
+
+    echo "<a href=\"${PDK_COMP_DIR}/docs/doxygen/html/index.html\">${PDK_COMP_LINK_TEXT}</a>" >> ${D}${PDK_INSTALL_DIR_RECIPE}/packages/.extras/doc/${DOC_FILE}
+}
+
+get_build_dir_bash() {
+  if [ -f ${S}/package.xdc ]
+  then
+    grep '^package' ${S}/package.xdc | sed -e 's|\[.*$||' | awk '{ print $2 }' | sed -e 's|\.|/|g'
+  else
+    echo ${S}
+    return 1
+  fi
+}
+
+export CROSS_TOOL_PRFX="arm-none-eabi-"
+export TOOLCHAIN_PATH_A8 = "${GCC_ARM_NONE_TOOLCHAIN}"
+export TOOLCHAIN_PATH_A9 = "${GCC_ARM_NONE_TOOLCHAIN}"
+export TOOLCHAIN_PATH_A15 = "${GCC_ARM_NONE_TOOLCHAIN}"
+export TOOLCHAIN_PATH_M4 = "${M4_TOOLCHAIN_INSTALL_DIR}"
+export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+
+export ROOTDIR = "${B}"
+export BIOS_INSTALL_PATH = "${SYSBIOS_INSTALL_DIR}"
+export XDC_INSTALL_PATH = "${XDC_INSTALL_DIR}"
+export PDK_INSTALL_PATH = "${PDK_INSTALL_DIR}/packages"
+
+export XDCPATH = "${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages;${PDK_INSTALL_DIR}/packages"
+export SECTTI="perl ${CG_XML_INSTALL_DIR}/ofd/sectti.pl"
+
+XDCMAKE ?= "1"
+LIMSOCS ?= ""
+LIMBOARDS ?= ""
+
+PARALLEL_XDC = "--jobs=${BB_NUMBER_THREADS}"
+
+do_configure() {
+    BUILD_DIR=${B}/`get_build_dir_bash`
+
+    mkdir -p ${BUILD_DIR}
+    cp -r ${S}/* ${BUILD_DIR}
+
+    if [ "${XDCMAKE}" == "1" ]
+    then
+        cd ${BUILD_DIR}
+
+        sed -i "s/\ \"\.\\\\\\\\\"\ +//" src/Module.xs
+        find -name "*.xs" -exec sed -i "s/ofd6x\.exe/ofd6x/" {} \;
+        find -name "*.xs" -exec sed -i "s/sectti\.exe/sectti/" {} \;
+        find -name "*.xs" -exec sed -i "/\.chm/d" {} \;
+        find -name "*.xs" -exec sed -i "s/pasm\_dos/pasm\_linux/" {} \;
+    fi
+}
+
+do_compile() {
+
+    if [ "${XDCMAKE}" == "1" ]
+    then
+        ${XDC_INSTALL_DIR}/xdc clean ${PARALLEL_XDC} -PR .
+        ${XDC_INSTALL_DIR}/xdc all ${PARALLEL_XDC} XDCARGS="${XDCARGS}" ROOTDIR="${ROOTDIR}" -PR .
+        ${XDC_INSTALL_DIR}/xdc release XDCARGS="${XDCARGS}" -PR .
+    else
+        BUILD_DIR=${B}/`get_build_dir_bash`
+        cd ${BUILD_DIR}
+
+        make release LIMIT_SOCS="${LIMSOCS}" LIMIT_BOARDS="${LIMBOARDS}"
+    fi
+}
+
+do_install () {
+    install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages
+    find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages \;
+    
+    if [ "${PDK_COMP_LINK_TEXT}" != "" ]
+    then
+        install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages/.extras/doc
+        create_doc_link
+    fi
+}
+
+FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages"

conf/layer.conf

@@ -6,4 +6,24 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
 BBFILE_COLLECTIONS += "meta-ti"
 BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-ti = "10"
+BBFILE_PRIORITY_meta-ti = "6"
+
+LICENSE_PATH += "${LAYERDIR}/licenses"
+
+LAYERDEPENDS_meta-ti = "core"
+
+SIGGEN_EXCLUDERECIPES_ABISAFE += " \
+    ti-sgx-ddk-km \
+    ti-sgx-ddk-um \
+    ti-ipc \
+    ti-ipc-rtos \
+    cmem-mod \
+    hplib-mod \
+    gdbserverproxy-module-drv \
+    debugss-module-drv \
+    uio-module-drv \
+    mpm-transport \
+    cppi-lld \
+    qmss-lld \
+    multiprocmgr \
+"

conf/machine/am180x-evm.conf

@@ -1,17 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM180x CPUs on an AM180x EVM board
-#@DESCRIPTION: Machine configuration for the TI AM180x EVM board
-
-require conf/machine/include/davinci.inc
-require conf/machine/include/omapl138.inc
-
-UBOOT_MACHINE = "da850evm_config"
-UBOOT_ENTRYPOINT = "0xc0008000"
-UBOOT_LOADADDRESS = "0xc0008000"
-
-MACHINE_FEATURES = "kernel26 serial ethernet"
-
-SERIAL_CONSOLE = "115200 ttyS2"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omapl138-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"

conf/machine/am335x-evm.conf

@@ -1,22 +1,20 @@
 #@TYPE: Machine
 #@NAME: AM335x EVM
 #@DESCRIPTION: Machine configuration for the TI AM335x EVM
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
-
-GUI_MACHINE_CLASS = "smallscreen"
 
 require conf/machine/include/ti33x.inc
 
-IMAGE_FSTYPES += "ubi tar.bz2"
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
 
-SERIAL_CONSOLE = "115200 ttyO0"
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
+# Normally AM335 boards use ttyS0, but ICE uses ttyS3, so try both
+SERIAL_CONSOLE = ""
+SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS3"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
 
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more
@@ -29,7 +27,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 1988"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 7000"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -38,10 +36,3 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 1988"
 # UBI: sub-page size:              512
 # UBI: VID header offset:          2048 (aligned 2048)
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "am335x_evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/am335x-hs-evm.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: AM335x HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM435x HS EVM
+
+require conf/machine/am335x-evm.conf
+
+UBOOT_MACHINE = "am335x_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am3x"

conf/machine/am3517-evm.conf

@@ -2,38 +2,25 @@
 #@NAME: AM3517 EVM
 #@DESCRIPTION: Machine configuration for the TI Sitara AM3517 EVM
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
-
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "ubi tar.bz2"
+IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
 SERIAL_CONSOLE = "115200 ttyS2"
 USE_VT = "2"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+KERNEL_DEVICETREE = "am3517-evm.dtb"
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "am3517_evm_config"
 XLOAD_MACHINE = "am3517evm_config"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen ethernet"
-
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -48,4 +35,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/am37x-evm.conf

@@ -2,37 +2,21 @@
 #@NAME: AM37x EVM
 #@DESCRIPTION: Machine configuration for the TI AM37x EVM
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
-
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "jffs2 tar.bz2"
+IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
+KERNEL_DEVICETREE = "omap3-evm-37xx.dtb"
+
 SERIAL_CONSOLE = "115200 ttyS0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "omap3_evm_config"
-XLOAD_MACHINE = "omap3evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"
-
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -47,4 +31,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/am387x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM389x evm
-#@DESCRIPTION: Machine configuration for the AM389x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/am389x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: am389x evm
-#@DESCRIPTION: Machine configuration for the am389x evm
-
-require conf/machine/include/ti816x.inc

conf/machine/am437x-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: AM437x EVM
+#@DESCRIPTION: Machine configuration for the TI AM437x EVM
+
+require conf/machine/include/ti43x.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 994 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 4000"
+
+# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   262144 bytes (256 KiB)
+# UBI: sub-page size:              4096
+# UBI: VID header offset:          4096 (aligned 4096)
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/am437x-hs-evm.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: AM437x HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM437x HS EVM
+
+require conf/machine/am437x-evm.conf
+
+UBOOT_MACHINE = "am43xx_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am4x"

conf/machine/am57xx-evm.conf

@@ -0,0 +1,39 @@
+#@TYPE: Machine
+#@NAME: AM57xx EVM
+#@DESCRIPTION: Machine configuration for the TI AM57xx EVM
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+
+KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb \
+                    am57xx-evm.dtb am57xx-evm-reva3.dtb \
+                    am571x-idk.dtb am571x-idk-lcd-osd101t2045.dtb am571x-idk-lcd-osd101t2587.dtb \
+                    am572x-idk.dtb am572x-idk-lcd-osd101t2045.dtb am572x-idk-lcd-osd101t2587.dtb"
+
+UBOOT_MACHINE = "am57xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/am57xx-hs-evm.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: AM57xx HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM57xx HS EVM
+
+require conf/machine/am57xx-evm.conf
+
+UBOOT_MACHINE = "am57xx_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_AUTO}/am5x"
+
+OPTEEMACHINE = "ti"
+OPTEEFLAVOR = "am57xx"
+OPTEEOUTPUTMACHINE = "ti"

conf/machine/beagle-x15.conf

@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: BeagleBoard X15
+#@DESCRIPTION: Machine configuration for the BeagleBoard X15
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_GUI_CLASS = "bigscreen"
+
+IMAGE_FSTYPES += "tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+
+KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb"
+
+UBOOT_MACHINE = "am57xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/beagleboard.conf

@@ -2,28 +2,17 @@
 #@NAME: Beagleboard machine
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board 
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
 require conf/machine/include/omap3.inc
 
-# SPL build
-EXTRA_IMAGEDEPENDS = "u-boot"
+# Only has DVI connector for external screen
+MACHINE_GUI_CLASS = "bigscreen"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
+IMAGE_FSTYPES += "tar.gz ubi"
+EXTRA_IMAGECMD_jffs2 = "-lnp"
 
-IMAGE_FSTYPES += "tar.bz2 ubi"
-EXTRA_IMAGECMD_jffs2 = "-lnp "
+KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb"
 
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyO2"
+SERIAL_CONSOLE = "115200 ttyS2"
 
 UBOOT_MACHINE = "omap3_beagle_config"
 
@@ -44,8 +33,6 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
 
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
-
 # For a modularized kernel we want to drag in networking, sound, rtc etc."
-MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl"
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl \
+  kernel-module-snd-soc-omap kernel-module-snd-soc-omap-mcbsp kernel-module-snd-soc-omap3beagle"

conf/machine/beaglebone.conf

@@ -2,25 +2,20 @@
 #@NAME: BeagleBone machine
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board 
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
+require conf/machine/include/ti33x.inc
+require conf/machine/include/beaglebone.inc
+
+KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb"
 
 # Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
+MACHINE_GUI_CLASS = "bigscreen"
 
-require conf/machine/include/ti33x.inc
-EXTRA_IMAGEDEPENDS = "u-boot"
+WKS_FILE = "sdimage-bootpart.wks"
+IMAGE_BOOT_FILES = "MLO u-boot.img"
+IMAGE_FSTYPES += "tar.xz wic.xz"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
+SERIAL_CONSOLE = "115200 ttyS0"
 
-IMAGE_FSTYPES += "tar.bz2 "
+UBOOT_MACHINE = "am335x_boneblack_config"
 
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyO0"
-
-UBOOT_MACHINE = "am335x_evm_config"
-
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"

conf/machine/c6a814x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: c6a814x evm
-#@DESCRIPTION: Machine configuration for the c6a814x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/c6a816x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: c6a816x evm
-#@DESCRIPTION: Machine configuration for the c6a816x evm
-
-require conf/machine/include/ti816x.inc

conf/machine/dm814x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: DM814x evm
-#@DESCRIPTION: Machine configuration for the DM814x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/dra7xx-evm.conf

@@ -0,0 +1,39 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+KERNEL_DEVICETREE = "dra7-evm.dtb dra7-evm-lcd-lg.dtb dra7-evm-lcd-osd101t2045.dtb dra7-evm-lcd-osd101t2587.dtb \
+                    dra72-evm.dtb dra72-evm-lcd-lg.dtb dra72-evm-lcd-osd101t2045.dtb dra72-evm-lcd-osd101t2587.dtb \
+                    dra72-evm-revc.dtb dra72-evm-revc-lcd-osd101t2045.dtb dra72-evm-revc-lcd-osd101t2587.dtb \
+                    dra71-evm.dtb dra71-evm-lcd-auo-g101evn01.0.dtb"
+
+UBOOT_MACHINE = "dra7xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/dra7xx-hs-evm.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: DRA7xx HS EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx HS EVM
+
+require conf/machine/dra7xx-evm.conf
+
+UBOOT_MACHINE = "dra7xx_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_AUTO}/dra7"
+
+OPTEEMACHINE = "ti"
+OPTEEFLAVOR = "dra7xx"
+OPTEEOUTPUTMACHINE = "ti"

conf/machine/hawkboard.conf

@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@NAME: OMAP-L138 based board
-#@DESCRIPTION: Machine configuration for the TI Hawkboard
-
-require conf/machine/include/davinci.inc
-require conf/machine/include/omapl138.inc
-
-UBOOT_MACHINE = "da850_omapl138_evm_config"
-UBOOT_ENTRYPOINT = "0xc0008000"
-UBOOT_LOADADDRESS = "0xc0008000"
-
-MACHINE_FEATURES = "kernel26 serial ethernet ide screen"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 971 LEBs (123293696 bytes, 117.6 MiB), available 958 LEBs (121643008 bytes, 116.0 MiB), LEB size 126976 bytes (124.0 KiB)
-MKUBIFS_ARGS = "-m 2048 -e 126976 -c 948"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-
-SERIAL_CONSOLE = "115200 ttyS2"

conf/machine/include/beaglebone.inc

@@ -0,0 +1,12 @@
+python () {
+    layers = bb.data.getVar("BBFILE_COLLECTIONS", d, 1)
+    if not layers:
+        return
+    if "yoctobsp" in layers:
+        bb.fatal("\nmeta-yocto-bsp has been detected in bblayers.conf, which provides basic reference BSP for beaglebone platform. " \
+                "\nSince meta-ti provides official comprehensive BSP for TI SoCs, including beaglebone, there could be potential conflicts " \
+                "\nbetween beaglebone machine definitions available in meta-yocto-bsp and meta-ti layers. It is recommended to remove " \
+                "\nor disable meta-yocto-bsp in bblayers.conf, when using meta-ti and building for beaglebone platform. Alternatively, " \
+                "\nit is possible to build for am335x-evm with meta-ti, which is a more generic platform for Sitara AM335x SoC and " \
+                "\nalso covers beaglebone variants.")
+}

conf/machine/include/davinci.inc

@@ -1,14 +1,14 @@
 require conf/machine/include/tune-arm926ejs.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r51"
+MACHINE_KERNEL_PR = "r54"
 
+KERNEL_IMAGETYPE = "zImage"
 
-KERNEL_IMAGETYPE = "uImage"
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 UBOOT_MACHINE = "davinci_dvevm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
@@ -19,6 +19,4 @@ EXTRA_IMAGEDEPENDS += "u-boot"
 SERIAL_CONSOLE ?= "115200 ttyS0"
 EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
 
-#ROOT_FLASH_SIZE = "29"
-
 MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa"

conf/machine/include/dra7xx.inc

@@ -0,0 +1,4 @@
+require conf/machine/include/omap-a15.inc
+SOC_FAMILY_append = ":dra7xx"
+
+MACHINE_FEATURES += "pci"

conf/machine/include/k2e.inc

@@ -0,0 +1,2 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2e"

conf/machine/include/k2g.inc

@@ -0,0 +1,2 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2g"

conf/machine/include/k2hk.inc

@@ -0,0 +1,2 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2hk"

conf/machine/include/keystone.inc

@@ -0,0 +1,27 @@
+SOC_FAMILY = "keystone"
+require conf/machine/include/soc-family.inc
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa15.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r10"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "boot-monitor"
+
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci dsp"
+MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"

conf/machine/include/omap-a15.inc

@@ -0,0 +1,36 @@
+SOC_FAMILY = "omap-a15"
+require conf/machine/include/soc-family.inc
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa15.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r7"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_IMAGETYPES = "zImage uImage"
+KERNEL_CLASSES += "kernel-uimage"
+
+UBOOT_ARCH = "arm"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "virtual/bootloader"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-video-fbdev"
+
+MACHINE_GUI_CLASS = "smallscreen"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx mmip dsp"

conf/machine/include/omap3.inc

@@ -1,15 +1,42 @@
 SOC_FAMILY = "omap3"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa8.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r121"
 
-KERNEL_IMAGETYPE = "uImage"
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+MACHINE_GUI_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r127"
+
+KERNEL_IMAGETYPE = "zImage"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb omap3-evm.dtb omap3-evm-37xx.dtb am3517-evm.dtb"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "omap3_evm_config"
+XLOAD_MACHINE = "omap3evm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
-EXTRA_IMAGEDEPENDS += "u-boot x-load"
+# If SPL is not used, may need to add x-load
+EXTRA_IMAGEDEPENDS += "u-boot"
 
+# List common SoC features, may need to add touchscreen/ethernet for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa sgx"

conf/machine/include/omap4.inc

@@ -1,23 +1,25 @@
 SOC_FAMILY = "omap4"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa9.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
-           xserver-xorg-extension-dri \
-           xserver-xorg-extension-dri2 \
-           xserver-xorg-extension-glx \
+           xserver-xorg-module-exa \
            xf86-input-evdev \
-           xf86-video-fbdev" 
+           xf86-video-omap"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r1"
+MACHINE_KERNEL_PR = "r4"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_MACHINE = "omap4_panda_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"

conf/machine/include/ti33x.inc

@@ -1,14 +1,44 @@
 SOC_FAMILY = "ti33x"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa8.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r12"
 
-KERNEL_IMAGETYPE = "uImage"
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+MACHINE_GUI_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r22"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+KERNEL_DEVICETREE = "am335x-evm.dtb am335x-evmsk.dtb am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb am335x-icev2.dtb"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am335x_evm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
 EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/ti43x.inc

@@ -0,0 +1,44 @@
+SOC_FAMILY = "ti43x"
+require conf/machine/include/soc-family.inc
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa9.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+MACHINE_GUI_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r3"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+KERNEL_DEVICETREE = "am43x-epos-evm.dtb am437x-gp-evm.dtb am437x-gp-evm-hdmi.dtb am437x-sk-evm.dtb am437x-idk-evm.dtb"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am43xx_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/ti814x.inc

@@ -1,26 +0,0 @@
-SOC_FAMILY = "ti814x"
-require conf/machine/include/soc-family.inc
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti81xx-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "ti8148_evm_config_nand"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Only build u-boot
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# Ship all kernel modules
-IMAGE_FSTYPES += "jffs2 tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lqn -e 128"
-SERIAL_CONSOLE = "115200 ttyO0"
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 ethernet"

conf/machine/include/ti816x.inc

@@ -1,26 +0,0 @@
-SOC_FAMILY = "ti816x"
-require conf/machine/include/soc-family.inc
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti81xx-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "ti8168_evm_config"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Only build u-boot
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# Ship all kernel modules
-IMAGE_FSTYPES += "jffs2 tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lqn -e 128"
-SERIAL_CONSOLE = "115200 ttyO2"
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 ethernet"

conf/machine/k2e-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2E machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E EVM
+
+require conf/machine/include/k2e.inc
+
+KERNEL_DEVICETREE = "keystone-k2e-evm.dtb"
+
+UBOOT_MACHINE = "k2e_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2e"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4000"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2e-hs-evm.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2E HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E HS EVM
+
+require conf/machine/k2e-evm.conf
+
+UBOOT_MACHINE = "k2e_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2e"

conf/machine/k2g-evm.conf

@@ -0,0 +1,34 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2G machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G EVM
+
+require conf/machine/include/k2g.inc
+
+MACHINE_FEATURES += "alsa"
+
+KERNEL_DEVICETREE = "keystone-k2g-evm.dtb keystone-k2g-evm-lcd.dtb keystone-k2g-ice.dtb"
+
+UBOOT_MACHINE = "k2g_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2g"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 2000"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/k2g-hs-evm.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2G HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G HS EVM
+
+require conf/machine/k2g-evm.conf
+
+UBOOT_MACHINE = "k2g_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2g"

conf/machine/k2hk-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK EVM
+
+require conf/machine/include/k2hk.inc
+
+KERNEL_DEVICETREE = "keystone-k2hk-evm.dtb"
+
+UBOOT_MACHINE = "k2hk_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2hk"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4000"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2hk-hs-evm.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK HS EVM
+
+require conf/machine/k2hk-evm.conf
+
+UBOOT_MACHINE = "k2hk_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2hk"

conf/machine/k2l-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2L machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L EVM
+
+require conf/machine/include/keystone.inc
+
+KERNEL_DEVICETREE = "keystone-k2l-evm.dtb"
+
+UBOOT_MACHINE = "k2l_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2l"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 2000"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/omap3-touchbook.conf

@@ -1,49 +0,0 @@
-#@TYPE: Machine
-#@NAME: Always Innovating touchbook
-#@DESCRIPTION: Machine configuration for the http://www.alwaysinnovating.com/touchbook/
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-fbdev \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/omap3.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-IMAGE_FSTYPES += "tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lnp "
-
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyS2"
-
-UBOOT_MACHINE = "omap3_beagle_config"
-XLOAD_MACHINE = "beagleboard_config"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    129024 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1996 LEBs
-MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-
-
-
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa touchscreen"

conf/machine/omap3evm.conf

@@ -1,40 +1,23 @@
 #@TYPE: Machine
 #@NAME: OMAP3 EVM
 #@DESCRIPTION: Machine configuration for the TI OMAP3 EVM
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
 
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "jffs2 tar.bz2"
+IMAGE_FSTYPES += "jffs2 tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
 SERIAL_CONSOLE = "115200 ttyS0"
 USE_VT = "0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "omap3_evm_config"
-XLOAD_MACHINE = "omap3evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"
+EXTRA_IMAGEDEPENDS += "x-load"
 
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -49,4 +32,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/omap5-evm.conf

@@ -0,0 +1,34 @@
+#@TYPE: Machine
+#@NAME: OMAP5 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP5 uEVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+KERNEL_DEVICETREE = "omap5-uevm.dtb"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4300"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+UBOOT_MACHINE = "omap5_uevm_config"

conf/machine/omapl138-lcdk.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: OMAP-L138 LCDK
+#@DESCRIPTION: Machine configuration for the TI OMAP-L138 LCDK board
+
+require conf/machine/include/davinci.inc
+require conf/machine/include/omapl138.inc
+
+UBOOT_MACHINE = "omapl138_lcdk_config"
+UBOOT_SUFFIX = "ais"
+
+UBOOT_ENTRYPOINT = "0xc0008000"
+UBOOT_LOADADDRESS = "0xc0008000"
+
+IMAGE_FSTYPES += "tar.xz"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+
+KERNEL_DEVICETREE = "da850-evm.dtb da850-lcdk.dtb"

conf/machine/pandaboard.conf

@@ -4,15 +4,13 @@
 
 require conf/machine/include/omap4.inc
 
-UBOOT_MACHINE = "omap4_panda_config"
+MACHINE_GUI_CLASS = "bigscreen"
 
-GUI_MACHINE_CLASS = "bigscreen"
+IMAGE_FSTYPES += "tar.gz"
 
-IMAGE_FSTYPES += "tar.bz2"
+KERNEL_DEVICETREE = "omap4-panda.dtb omap4-panda-a4.dtb omap4-panda-es.dtb"
 
-SERIAL_CONSOLE = "115200 ttyO2"
+SERIAL_CONSOLE = "115200 ttyS2"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
-MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen touchscreen usbgadget usbhost vfat"
-
-
+MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen usbgadget usbhost vfat sgx"

licenses/TI-TFL

@@ -0,0 +1,62 @@
+TEXAS INSTRUMENTS TEXT FILE LICENSE
+
+Copyright (c) [earliest year] - [latest year] Texas Instruments Incorporated
+
+All rights reserved not granted herein.
+
+Limited License.
+
+Texas Instruments Incorporated grants a world-wide, royalty-free,
+non-exclusive license under copyrights and patents it now or hereafter owns
+or controls to make, have made, use, import, offer to sell and sell
+("Utilize") this software subject to the terms herein.  With respect to the
+foregoing patent license, such license is granted  solely to the extent that
+any such patent is necessary to Utilize the software alone.  The patent
+license shall not apply to any combinations which include this software,
+other than combinations with devices manufactured by or for TI ("TI
+Devices").  No hardware patent is licensed hereunder.
+
+Redistributions must preserve existing copyright notices and reproduce this
+license (including the above copyright notice and the disclaimer and (if
+applicable) source code license limitations below) in the documentation
+and/or other materials provided with the distribution
+
+Redistribution and use in binary form, without modification, are permitted
+provided that the following conditions are met:
+
+* No reverse engineering, decompilation, or disassembly of this software is
+permitted with respect to any software provided in binary form.
+
+* any redistribution and use are licensed by TI for use only with TI
+Devices.
+
+* Nothing shall obligate TI to provide you with source code for the software
+licensed and provided to you in object code.
+
+If software source code is provided to you, modification and redistribution
+of the source code are permitted provided that the following conditions are
+met:
+
+* any redistribution and use of the source code, including any resulting
+derivative works, are licensed by TI for use only with TI Devices.
+
+* any redistribution and use of any object code compiled from the source
+code and any resulting derivative works, are licensed by TI for use only
+with TI Devices.
+
+Neither the name of Texas Instruments Incorporated nor the names of its
+suppliers may be used to endorse or promote products derived from this
+software without specific prior written permission.
+
+DISCLAIMER.
+
+THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+NO EVENT SHALL TI AND TI'S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

licenses/TI-TSPA

@@ -0,0 +1,206 @@
+Texas Instruments Incorporated
+Technology and Software Publicly Available
+Software License Agreement
+
+
+Important - Please read the following license agreement carefully.  This is
+a legally binding agreement.  Do not click "i have read and agree" or use
+(as applicable) the Licensed Materials unless: (1) you are authorized to
+accept and agree to the terms of this license agreement on behalf of
+yourself or your company (as applicable) and (2) you intend to be bound by
+the terms of this license agreement on behalf of yourself or your company
+(as applicable).
+
+This Software License Agreement ("Agreement") is a legal agreement between
+you (either an individual or entity) and Texas Instruments Incorporated
+("TI"), 12500 TI Boulevard, Dallas, Texas 75243.  The "Licensed Materials"
+subject to this Agreement include the software programs (in whole or in
+part), that accompany this Agreement and set forth in the applicable
+software manifest and which you access "on-line" and/or electronic
+documentation (in whole or in part) associated and provided with these
+software programs.  By installing, copying or otherwise using the Licensed
+Materials you agree to abide by the terms of this Agreement.  If you choose
+not to accept or agree with these terms, do not download or install the
+Licensed Materials.
+
+Note Regarding Possible Access to Open Source Software:  The Licensed
+Materials may be bundled with Open Source Software.  "Open Source Software"
+means any software licensed under terms requiring that (A) other software
+("Proprietary Software") incorporated, combined or distributed with such
+software or developed using such software: (i) be disclosed or distributed
+in source code form; or (ii) otherwise be licensed on terms inconsistent
+with the terms of this Agreement, including but not limited to permitting
+use of the Proprietary Software on or with devices other than TI Devices, or
+(B) require the owner of Proprietary Software to license any of its patents
+to users of the Open Source Software and/or Proprietary Software
+incorporated, combined or distributed with such Open Source Software or
+developed using such Open Source Software.
+
+You may gain access to Open Source Software, in which case such Open Source
+Software will be listed in the applicable software manifest (in whole or in
+part, the "Open Source Materials").  Your use of the Open Source Materials
+is subject to the separate licensing terms applicable to such Open Source
+Materials as specified in the applicable software manifest.  For
+clarification, this Agreement does not limit your rights under, or grant you
+rights that supersede, the license terms of any applicable Open Source
+Materials license agreement.  If any of the Open Source Materials have been
+provided to you in object code only, TI will provide to you or show you
+where can access the source code versions of such Open Source Materials if
+you contact TI at Texas Instruments Incorporated, 12500 TI Boulevard, Mail
+Station 8638, Dallas, Texas 75243, Attention: Contracts Manager.  You may
+terminate this Agreement in the event you choose not to accept or agree with
+the terms in any applicable Open Source Materials license agreement,
+provided that such termination occurs within five (5) calendar days of
+acceptance of this Agreement and you abide by all applicable license terms
+in this Agreement until such termination.
+
+1. License.
+
+a. Source Code License.  For the Licensed Materials provided in source code
+format, TI hereby grants to you a limited, non-exclusive license to
+reproduce, use, and create modified or derivative works of the Licensed
+Materials provided to you in source code format and to distribute an
+unlimited number of copies of such source code Licensed Materials, or any
+derivatives thereof, in any format.
+
+b.  Object Code License.  For the Licensed Materials provided in object code
+format, TI hereby grants to you a limited, non-exclusive license to
+reproduce and use the Licensed Materials provided to you in object code
+format and to distribute an unlimited number of object or executable copies
+of such object code Licensed Materials.
+
+2. Termination.  This Agreement is effective until terminated.  Without
+prejudice to any other rights, TI may terminate your right to use the
+Licensed Materials under this Agreement if you fail to comply with the terms
+of this Agreement.  In such event, you shall destroy all copies of the
+Licensed Materials, including all portions and derivatives thereof.
+
+3. Intellectual Property Rights.
+
+a. The Licensed Materials being provided to you hereunder are being made
+publicly available by TI, even though they contain copyrighted material of
+TI and its licensors, if applicable.   In no event may you alter, remove or
+destroy any copyright notice included in the Licensed Materials.  To the
+extent that any of the Licensed Materials are provided in binary or object
+code only, you may not unlock, decompile, reverse engineer, disassemble or
+otherwise translate such binary or object code to human-perceivable form.
+The source code of such reverse engineered code may contain TI trade secret
+and other proprietary information. TI reserves all rights not specifically
+granted under this Agreement.
+
+b. Certain Licensed Materials may (i) require patent licenses from third
+parties claiming patent rights covering implementation of the Licensed
+Materials or (ii) be based on industry recognized standards or software
+programs published by industry recognized standards bodies and certain third
+parties may claim to own patents or copyrights that cover implementation of
+those standards.  You acknowledge and agree that this Agreement does not
+convey a license to any such third party patents and copyrights.
+
+c. YOU ACKNOWLEDGE AND AGREE THAT TI SHALL NOT BE LIABLE FOR AND SHALL NOT
+DEFEND OR INDEMNIFY YOU AGAINST ANY THIRD PARTY INFRINGEMENT CLAIM THAT
+RELATES TO OR IS BASED ON YOUR MANUFACTURE, USE, OR DISTRIBUTION OF THE
+LICENSED MATERIALS OR YOUR MANUFACTURE, USE, OFFER FOR SALE, SALE,
+IMPORTATION OR DISTRIBUTION OF YOUR PRODUCTS THAT INCLUDE OR INCORPORATE THE
+LICENSED MATERIALS.
+
+d. You acknowledge and agree that you are responsible for any fees or
+royalties that may be payable to any third party based on such third party's
+interests in the Licensed Materials described in Section 3(b) above (the
+"Third Party Payment Obligations").  You agree to indemnify TI against any
+Third Party Payment Obligations and will defend any claim, suit or
+proceeding brought against TI insofar as such claim, suit or proceeding is
+based on your failure to pay any Third Party Payment Obligations.
+
+4. Warranties and Limitations.  THE LICENSED MATERIALS ARE PROVIDED "AS IS".
+TI AND ITS LICENSORS MAKE NO WARRANTY OR REPRESENTATION, EXPRESS, IMPLIED OR
+STATUTORY, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR
+A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS OF
+RESPONSES, RESULTS AND LACK OF NEGLIGENCE.  TI DISCLAIMS ANY WARRANTY OF
+TITLE, QUIET ENJOYMENT, QUIET POSESSION, AND NON-INFRINGEMENT OF ANY THIRD
+PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE LICENSED MATERIALS OR
+USE OF THOSE MATERIALS.
+
+YOU ACKNOWLEDGE AND AGREE THAT THE LICENSED MATERIALS MAY NOT BE INTENDED
+FOR PRODUCTION APPLICATIONS AND MAY CONTAIN IRREGULARITIES AND DEFECTS NOT
+FOUND IN PRODUCTION SOFTWARE.  FURTHERMORE, YOU ACKNOWLEDGE AND AGREE THAT
+THE LICENSED MATERIALS HAVE NOT BEEN TESTED OR CERTIFIED BY ANY GOVERNMENT
+AGENCY OR INDUSTRY REGULATORY ORGANIZATION OR ANY OTHER THIRD PARTY
+ORGANIZATION.  YOU AGREE THAT PRIOR TO USING, INCORPORATING OR DISTRIBUTING
+THE LICENSED MATERIALS IN OR WITH ANY COMMERCIAL PRODUCT THAT YOU WILL
+THOROUGHLY TEST THE PRODUCT AND THE FUNCTIONALITY OF THE LICENSED MATERIALS
+IN OR WITH THAT PRODUCT AND BE SOLELY RESPONSIBLE FOR ANY PROBLEMS OR
+FAILURES.
+
+IN NO EVENT SHALL TI OR ITS LICENSORS BE LIABLE FOR ANY SPECIAL, INDIRECT,
+INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED ON ANY THEORY
+OF LIABILITY, ARISING IN ANY WAY OUT OF THIS AGREEMENT, OR YOUR USE OF THE
+LICENSED MATERIALS, WHETHER OR NOT TI HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.  EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
+REMOVAL OR REINSTALLATION, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OR
+CORRUPTION OF DATA, LOSS OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR
+LOSS OF USE OR INTERRUPTION OF BUSINESS OR ANY OTHER ECONOMIC LOSS.  IN NO
+EVENT WILL TI'S AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
+YOUR USE OF THE LICENSED MATERIALS EXCEED FIVE HUNDRED U.S. DOLLARS
+(US$500).
+
+Because some jurisdictions do not allow the exclusion or limitation of
+incidental or consequential damages or limitation on how long an implied
+warranty lasts, the above limitations or exclusions may not apply to you.
+
+5. Export Control.  The Licensed Materials may be subject to the export or
+import regulations of certain countries. You agree to comply with all such
+regulations and acknowledge that you have the responsibility to obtain any
+licenses or other authorizations that may be required to export, re-export
+or import the Licensed Materials.
+
+6. Governing Law, Jurisdiction and Severability.  This Agreement will be
+governed by and interpreted in accordance with the laws of the State of
+Texas, without reference to conflict of laws principles.  If for any reason
+a court of competent jurisdiction finds any provision of the Agreement to be
+unenforceable, that provision will be enforced to the maximum extent
+possible to effectuate the intent of the parties and the remainder of the
+Agreement shall continue in full force and effect. This Agreement shall not
+be governed by the United Nations Convention on Contracts for the
+International Sale of Goods, or by the Uniform Computer Information
+Transactions Act (UCITA). The parties agree that non-exclusive jurisdiction
+for any dispute arising out of or relating to this Agreement lies within the
+courts located in the State of Texas.  Notwithstanding the foregoing, any
+judgment may be enforced in any United States or foreign court, and either
+party may seek injunctive relief in any United States or foreign court.
+Failure by TI to enforce any provision of this Agreement shall not be deemed
+a waiver of future enforcement of that or any other provision in this
+Agreement or any other agreement that may be in place between the parties.
+
+7. PRC Provisions.  If you are located in the People's Republic of China
+("PRC") or if the Licensed Materials will be sent to the PRC, the following
+provisions shall apply:
+
+a. Registration Requirements.  You shall be solely responsible for
+performing all acts and obtaining all approvals that may be required in
+connection with this Agreement by the government of the PRC, including but
+not limited to registering pursuant to, and otherwise complying with, the
+PRC Measures on the Administration of Software Products, Management
+Regulations on Technology Import-Export, and Technology Import and Export
+Contract Registration Management Rules.  Upon receipt of such approvals from
+the government authorities, you shall forward evidence of all such approvals
+to TI for its records.  In the event that you fail to obtain any such
+approval or registration, you shall be solely responsible for any and all
+losses, damages or costs resulting therefrom, and shall indemnify TI for all
+such losses, damages or costs.
+
+b. Governing Language.  This Agreement is written and executed in the
+English language.  If a translation of this Agreement is required for any
+purpose, including but not limited to registration of the Agreement pursuant
+to any governmental laws, regulations or rules, you shall be solely
+responsible for creating such translation.  Any translation of this
+Agreement into a language other than English is intended solely in order to
+comply with such laws or for reference purposes, and the English language
+version shall be authoritative and controlling.
+
+8. Entire Agreement.  This is the entire agreement between you and TI and
+supersedes any prior agreement between the parties related to the subject
+matter of this Agreement. No amendment or modification of this Agreement
+will be effective unless in writing and signed by a duly authorized
+representative of TI.  You hereby warrant and represent that you have
+obtained all authorizations and other applicable consents required
+empowering you to enter into this Agreement.

recipes-bsp/abefw/abefw_1.0.14.bb

@@ -0,0 +1,23 @@
+SUMMARY = "Firmware for OMAP4 and OMAP5 ABE"
+HOMEPAGE = "http://git.ti.com"
+LICENSE = "BSD | GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=923db086ed9463ab3215b24d87e05ec5"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+COMPATIBLE_MACHINE = "pandaboard|omap5-evm"
+
+SRC_URI = "git://git.ti.com/glsdk/abefw-omap4plus.git;protocol=git"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "ceccc0332264e39bdc51e54f80ea7256a3886c58"
+
+PR = "r0"
+
+do_install() {
+        mkdir -p ${D}/lib/firmware
+        cp ${S}/firmware/omap4_abe_new ${D}/lib/firmware/
+}
+
+FILES_${PN} += "/lib/firmware/omap4_abe_new"

recipes-bsp/aif2-lld/aif2-lld-test_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "TI Antenna Interface peripheral module low level driver test binaries"
+
+DEPENDS = "common-csl-ip aif2-lld qmss-lld cppi-lld"
+
+include aif2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} AIF2_SRC_DIR=${WORKDIR}/git"
+
+do_compile () {
+    oe_runmake clean DEVICE=k2hk
+    oe_runmake tests DEVICE=k2hk
+}
+
+do_install () {
+    oe_runmake installbin DEVICE=k2hk AIF2_SRC_DIR=${WORKDIR}/git INSTALL_BIN_BASE_DIR=${D}/${bindir}
+}

recipes-bsp/aif2-lld/aif2-lld.inc

@@ -0,0 +1,22 @@
+LICENSE = "BSD-3-Clause"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+
+AIF2_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/aif2-lld.git"
+AIF2_LLD_GIT_PROTOCOL = "git"
+AIF2_LLD_GIT_BRANCH = "master"
+AIF2_LLD_GIT_DESTSUFFIX = "git/ti/drv/aif2"
+
+# The following commit correspond to DEV.AIF2LLD.01.02.00.01
+AIF2_LLD_SRCREV = "a701bbb5ed2976d5723c955c87a685f7517cffa3"
+
+BRANCH = "${AIF2_LLD_GIT_BRANCH}"
+SRC_URI = "${AIF2_LLD_GIT_URI};destsuffix=${AIF2_LLD_GIT_DESTSUFFIX};protocol=${AIF2_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${AIF2_LLD_SRCREV}"
+
+PV = "1.2.0.1"
+INC_PR = "r0"
+
+COMPATIBLE_MACHINE = "k2hk"
+
+S = "${WORKDIR}/${AIF2_LLD_GIT_DESTSUFFIX}"

recipes-bsp/aif2-lld/aif2-lld_git.bb

@@ -0,0 +1,17 @@
+DESCRIPTION = "Antenna Interface low level driver"
+
+DEPENDS = "common-csl-ip qmss-lld cppi-lld"
+
+include aif2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+    oe_runmake lib DEVICE=k2hk
+}
+
+do_install () {
+    oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/boot-monitor/boot-monitor_git.bb

@@ -0,0 +1,47 @@
+DESCRIPTION = "Boot Monitor - TI ARM Boot monitor code"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
+
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEPENDS = "u-boot-mkimage-native"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ks2-boot-monitor.git;protocol=git;branch=${BRANCH}"
+
+PV = "4.0+git${SRCPV}"
+
+BRANCH = "master"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "e1f885ab6dc544884728e333cc6e396f7eb08286"
+
+BOOT_MONITOR_IMAGE  ?= "skern-${BOOT_MONITOR_MAKE_TARGET}.bin"
+
+FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}" LD="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}""
+
+FILES_${PN} = "/boot"
+
+inherit deploy
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake image_${BOOT_MONITOR_MAKE_TARGET}
+}
+
+do_install () {
+	install -d ${D}/boot
+	install -m 0644 ${S}/${BOOT_MONITOR_IMAGE} ${D}/boot/
+}
+
+do_deploy () {
+	install -d ${DEPLOYDIR}
+	install -m 0644 ${S}/${BOOT_MONITOR_IMAGE} ${DEPLOYDIR}/
+}
+
+addtask deploy before do_build after do_compile

recipes-bsp/bt-fw/bt-fw_git.bb

@@ -0,0 +1,24 @@
+DESCRIPTION = "Firmware files for Bluetooth"
+LICENSE = "TI-TSPA"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=f39eac9f4573be5b012e8313831e72a9"
+
+PV = "8.7.1+git${SRCPV}"
+
+CLEANBROKEN = "1"
+
+SRCREV = "0ee619b598d023fffc77679f099bc2a4815510e4"
+BRANCH = "master"
+SRC_URI = "git://git.ti.com/ti-bt/service-packs.git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+do_compile() {
+    :
+}
+
+do_install() {
+    install -d ${D}${base_libdir}/firmware/ti-connectivity
+    oe_runmake "DEST_DIR=${D}" "BASE_LIB_DIR=${base_libdir}" install
+}
+
+FILES_${PN} += "${base_libdir}/firmware/ti-connectivity/*"

recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb

@@ -0,0 +1,28 @@
+DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
+
+LICENSE = "TI-TSPA"
+LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
+
+PV = "1.9.2"
+PR = "r0"
+
+SRCREV = "7eb9c0856a9e8b3b42bf64f761da135852b8eea7"
+BRANCH ?= "ti-v4.1.y"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ti-amx3-cm3-pm-firmware.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+do_compile() {
+	make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"
+}
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware
+	install -m 0644 bin/am335x-pm-firmware.elf ${D}${base_libdir}/firmware/
+	install -m 0644 bin/*-scale-data.bin ${D}${base_libdir}/firmware/
+}
+
+FILES_${PN} += "${base_libdir}/firmware"

recipes-bsp/cmem/cmem-mod_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "Kernel module for contiguous memory allocation from userspace"
+
+include cmem.inc
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "b"
+PR = "${MACHINE_KERNEL_PR}"
+
+inherit module
+
+EXTRA_OEMAKE += '-f lu.mak KERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" TOOLCHAIN_PREFIX="${TOOLCHAIN_PREFIX}" EXEC_DIR="${D}/lib/modules/${KERNEL_VERSION}/extra"'
+MAKE_TARGETS = "module"
+
+KERNEL_MODULE_AUTOLOAD += "cmemk"
+
+do_install_prepend() {
+    cp ${B}/src/cmem/module/Module.symvers ${B}/ || true
+}

recipes-bsp/cmem/cmem.inc

@@ -0,0 +1,14 @@
+HOMEPAGE = "http://processors.wiki.ti.com/index.php/Category:CMEM"
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://include/ti/cmem.h;beginline=1;endline=30;md5=9b745e2765a6ba8a636c91aed4b02ac1"
+
+BRANCH = "lu-next"
+# This corresponds to version 4.14.00.00_eng
+SRCREV = "b514a99ac45c64f0439282d0774d7cff5def4c6f"
+
+PV = "4.14.00.00+git${SRCPV}"
+
+SRC_URI = "git://git.ti.com/ipc/ludev.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"

recipes-bsp/cmem/cmem_git.bb

@@ -0,0 +1,13 @@
+DESCRIPTION = "The cmem component supports contiguous memory allocation from userspace"
+
+include cmem.inc
+
+RDEPENDS_${PN} = "cmem-mod"
+
+PR = "r1"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/*"
+
+inherit autotools

recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb

@@ -0,0 +1,22 @@
+require common-csl-ip.inc
+PR = "${INC_PR}.4"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit ti-pdk
+
+DEPENDS_remove = "${PN}"
+
+# Build with make instead of XDC
+XDCMAKE = "0"
+
+LIMSOCS_ti33x = "am335x"
+LIMSOCS_ti43x = "am437x"
+LIMSOCS_omap-a15 = "am571x am572x"
+LIMSOCS_k2hk = "k2h k2k"
+LIMSOCS_k2l-evm = "k2l"
+LIMSOCS_k2e = "k2e"
+LIMSOCS_k2g = "k2g"
+
+export PDK_CSL_ROOT_PATH ="${WORKDIR}/build"
+export DEST_ROOT="${S}"

recipes-bsp/common-csl-ip/common-csl-ip.inc

@@ -0,0 +1,22 @@
+DESCRIPTION = "Chip support library low level interface"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5857833e20836213677fac33f9aded21"
+
+COMPATIBLE_MACHINE = "keystone|dra7xx"
+
+PV = "03.03.00.06C"
+INC_PR = "r0"
+
+CSL_GIT_URI = "git://git.ti.com/keystone-rtos/common-csl-ip.git"
+CSL_GIT_PROTOCOL ="git"
+CSL_GIT_BRANCH = "master"
+CSL_GIT_DESTSUFFIX = "git"
+
+# Below commit ID corresponding to "DEV.CSL_PROCESSOR-SDK.03.03.00.06C"
+CSL_SRCREV = "ce2bbf96b08fa69eda7bfc92aa7760b7ca70dddf"
+
+BRANCH="${CSL_GIT_BRANCH}"
+SRC_URI = "${CSL_GIT_URI};protocol=${CSL_GIT_PROTOCOL};branch=${BRANCH};destsuffix=${CSL_GIT_DESTSUFFIX}"
+SRCREV = "${CSL_SRCREV}"
+
+S = "${WORKDIR}/${CSL_GIT_DESTSUFFIX}"

recipes-bsp/common-csl-ip/common-csl-ip_git.bb

@@ -0,0 +1,17 @@
+require common-csl-ip.inc
+
+PR = "${INC_PR}.0"
+
+ALLOW_EMPTY_${PN} = "1"
+
+CLEANBROKEN = "1"
+
+do_compile() {
+    :
+}
+
+do_install () {
+    install -d ${D}${includedir}/ti/csl
+    find . -name "*.h" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
+    find ./src/ip/serdes_sb/V0 -name "*.c" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
+}

recipes-bsp/cppi-lld/cppi-lld-rtos_git.bb

@@ -0,0 +1,13 @@
+inherit ti-pdk
+require cppi-lld.inc
+
+PR = "${INC_PR}.0"
+
+DEPENDS_append = " rm-lld-rtos \
+                   qmss-lld-rtos \
+"
+
+XDCARGS_k2hk = "k2h k2k"
+XDCARGS_k2e = "k2e"
+XDCARGS_k2l-evm = "k2l"
+XDCARGS_k2g = "k2g"

recipes-bsp/cppi-lld/cppi-lld-test_git.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "TI CPPI low level driver unit test and example binaries"
+DEPENDS = "common-csl-ip rm-lld cppi-lld qmss-lld"
+
+include cppi-lld.inc
+
+PR = "${INC_PR}.0"
+
+CHOICELIST = "yes no"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+do
+	make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/cppi-lld/cppi-lld.inc

@@ -0,0 +1,27 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/cppi/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
+
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+CPPI_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/cppi-lld.git"
+CPPI_LLD_GIT_PROTOCOL = "git"
+CPPI_LLD_GIT_BRANCH = "master"
+CPPI_LLD_GIT_DESTSUFFIX = "git/ti/drv/cppi"
+
+# Below Commit ID corresponds to "DEV.CPPI_LLD.02.01.00.12A"
+CPPI_LLD_SRCREV = "6a1d2891b3de9891dea71a069a261c6368209413"
+
+BRANCH = "${CPPI_LLD_GIT_BRANCH}"
+SRC_URI = "${CPPI_LLD_GIT_URI};destsuffix=${CPPI_LLD_GIT_DESTSUFFIX};protocol=${CPPI_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+
+SRCREV = "${CPPI_LLD_SRCREV}"
+PV = "02.01.00.12"
+INC_PR = "r1"
+
+DEVICELIST = "k2h k2k k2l k2e"
+DEVICELIST_k2hk = "k2h k2k"
+DEVICELIST_k2l-evm  = "k2l"
+DEVICELIST_k2e  = "k2e"
+
+S = "${WORKDIR}/${CPPI_LLD_GIT_DESTSUFFIX}"

recipes-bsp/cppi-lld/cppi-lld_git.bb

@@ -0,0 +1,31 @@
+DESCRIPTION = "TI CPPI Module low level driver"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld"
+
+include cppi-lld.inc
+
+PR = "${INC_PR}.1"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR}
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR}  DEVICE="${device}"
+	done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+
+#   Set the generic device library symbolic link to default k2h
+    cd ${D}${libdir}
+
+    # Link only the first device in the list
+    for device in ${DEVICELIST}
+    do
+        ln -sf libcppi_${device}.so.1.0.0 libcppi_device.so.1
+        break
+    done
+    ln -sf libcppi_device.so.1 libcppi_device.so
+}

recipes-bsp/cuia/cuia_1.0.0.13.bb

@@ -0,0 +1,25 @@
+DESCRIPTION = "TI Unified Instrumentation Architecture in C (cUIA)"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://cuia_${CUIA_PV}_manifest.html;md5=0eea94e3bb94de4ddee77653eba1c7c5"
+
+CUIA_PV = "1_00_00_13"
+CUIA_PVExtra = ""
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/UIA/SCMCSDK/cuia_${CUIA_PV}${CUIA_PVExtra}.tar.gz;name=cuia"
+SRC_URI[cuia.md5sum] = "ef53989ac70c191841cd656cdc8770be"
+SRC_URI[cuia.sha256sum] = "f16d138a9146fdc7d52cba77bd30596da65835f6ffe4092baf2b33d1c1a4fb0d"
+
+S = "${WORKDIR}/cuia_${CUIA_PV}${CUIA_PVExtra}"
+
+CLEANBROKEN = "1"
+
+do_compile () {
+	cd ${S}
+	oe_runmake clean
+	oe_runmake all
+}
+
+do_install() {
+	cd ${S}
+	oe_runmake DESTDIR=${D} libdir=${libdir} includedir=${includedir} install
+}

recipes-bsp/dfe-lld/dfe-lld-test_git.bb

@@ -0,0 +1,20 @@
+DESCRIPTION = "TI Digital Radio Front End lld test application"
+
+DEPENDS = "common-csl-ip dfe-lld iqn2-lld"
+
+include dfe-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} DFE_SRC_DIR=${S}"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	oe_runmake clean DEVICE=k2l
+	oe_runmake tests DEVICE=k2l
+	oe_runmake tests DEVICE=k2l USEDYNAMIC_LIB=yes
+}
+
+do_install () {
+	oe_runmake installbin INSTALL_BIN_BASE_DIR=${D}/${bindir}
+}

recipes-bsp/dfe-lld/dfe-lld.inc

@@ -0,0 +1,22 @@
+LICENSE = "BSD-3-Clause"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=1f4217b705bf98762a302fd720649dcc"
+
+DFE_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/dfe-lld.git"
+DFE_LLD_GIT_PROTOCOL = "git"
+DFE_LLD_GIT_BRANCH = "master"
+DFE_LLD_GIT_DESTSUFFIX = "git/ti/drv/dfe"
+
+# Below commit ID corresponds to "DEV.DFE_LLD.01.00.00.08"
+DFE_LLD_SRCREV = "d51482ef18889bbbd8e9cdc207c6fe9e27b1ab03"
+
+BRANCH = "${DFE_LLD_GIT_BRANCH}"
+SRC_URI = "${DFE_LLD_GIT_URI};destsuffix=${DFE_LLD_GIT_DESTSUFFIX};protocol=${DFE_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${DFE_LLD_SRCREV}"
+
+PV = "1.0.0.8"
+INC_PR = "r0"
+
+COMPATIBLE_MACHINE = "k2l-evm"
+
+S = "${WORKDIR}/${DFE_LLD_GIT_DESTSUFFIX}"

recipes-bsp/dfe-lld/dfe-lld_git.bb

@@ -0,0 +1,17 @@
+DESCRIPTION = "Digital Radio Front End low level driver"
+
+DEPENDS = "common-csl-ip"
+
+include dfe-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	oe_runmake lib DEVICE=k2l
+}
+
+do_install () {
+	oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/dspdce-fw/dspdce-fw_git.bb

@@ -0,0 +1,62 @@
+DESCRIPTION = "Firmware for DSP for an example application called copycodectest"
+LICENSE = "TI-TSPA"
+LIC_FILES_CHKSUM = "file://src/ti/framework/dce/dce.c;startline=1;endline=31;md5=2c6e9aba6ed75f22b1a2b7544b1c809d"
+
+COMPATIBLE_MACHINE = "dra7xx"
+
+SRC_URI = "git://git.ti.com/glsdk/dspdce.git;protocol=git"
+
+SRCREV = "de6e599f067b25c46cc0c8f74a22cc3b8aafbae8"
+
+PV = "1.00.00.07"
+
+S = "${WORKDIR}/git"
+
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+PR = "r4"
+inherit update-alternatives
+
+DEPENDS = "ti-xdctools ti-sysbios ti-codec-engine ti-framework-components ti-xdais ti-ipc-rtos ti-osal ti-cgt6x-native"
+
+export HWVERSION = "ES10"
+export BIOSTOOLSROOT = "${STAGING_DIR_TARGET}/usr/share/ti"
+
+export XDCVERSION = "ti-xdctools-tree"
+export BIOSVERSION = "ti-sysbios-tree"
+export IPCVERSION = "ti-ipc-tree"
+export CEVERSION = "ti-codec-engine-tree"
+export FCVERSION = "ti-framework-components-tree"
+export XDAISVERSION = "ti-xdais-tree"
+export OSALVERSION = "ti-osal-tree"
+
+export IPCSRC = "${STAGING_DIR_TARGET}/usr/share/ti/ti-ipc-tree"
+export C66XCGTOOLSPATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+
+do_configure() {
+    cd ${S}
+    make unconfig
+    make vayu_config
+}
+
+do_compile() {
+    cd ${S}
+    make dspbin
+}
+
+TARGET = "dra7-dsp1-fw.xe66"
+
+do_install() {
+    install -d ${D}${base_libdir}/firmware
+    install -m 0644 ${S}/dra7xx-c66x-dsp.xe66 ${D}${base_libdir}/firmware/${TARGET}.${BPN}
+}
+
+ALTERNATIVE_${PN} = "dra7-dsp1-fw.xe66"
+ALTERNATIVE_LINK_NAME[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}"
+ALTERNATIVE_TARGET[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}.${BPN}"
+ALTERNATIVE_PRIORITY = "10"
+
+INSANE_SKIP_${PN} = "arch"
+
+FILES_${PN} += "${base_libdir}/firmware/*"

recipes-bsp/dsptop/debugss-module-drv_git.bb

@@ -0,0 +1,24 @@
+DESCRIPTION = "Debug Sub-System (DebugSS) driver for Keystone and DRA7xx devices"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3"
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "d"
+PR = "${MACHINE_KERNEL_PR}"
+PV_append = "+git${SRCPV}"
+
+S = "${WORKDIR}/git/debugss_module/debugss-mod"
+
+inherit module
+
+PLATFORM = ""
+PLATFORM_dra7xx = "DRA7xx_PLATFORM"
+PLATFORM_keystone = "KEYSTONE_PLATFORM"
+PLATFORM_k2e = "K2E_PLATFORM"
+
+EXTRA_OEMAKE = "'PLATFORM=${PLATFORM}' KVERSION=${KERNEL_VERSION} KERNEL_SRC=${STAGING_KERNEL_DIR}"
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+include dsptop.inc

recipes-bsp/dsptop/dsptop.inc

@@ -0,0 +1,8 @@
+# This corresponds to version 1.4.0
+SRCREV = "0aedcabdbbcbfc7558f70fc50afc95583302a087"
+PV = "1.4.0"
+INC_PR = "r0"
+
+SRC_URI = "git://git.ti.com/sdo-emu/dsptop.git;protocol=git;branch=${BRANCH}"
+
+BRANCH = "master"

recipes-bsp/dsptop/dsptop_git.bb

@@ -0,0 +1,29 @@
+DESCRIPTION = "TI dsptop utility."
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://debian/copyright;md5=309825aa8f5edfcf2c44912ac094b979"
+
+DEPENDS = "libulm ncurses"
+
+PR = "${INC_PR}.2"
+
+S = "${WORKDIR}/git/dsptop"
+
+DEVICE = ""
+DEVICE_dra7xx = "DRA7xx"
+DEVICE_keystone = "C66AK2Hxx"
+
+EXTRA_OEMAKE = "release DEVICE=${DEVICE} CROSS_COMPILE=${TARGET_PREFIX} CC="${CC}""
+
+do_install() {
+    oe_runmake install DESTDIR=${D}
+}
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+RDEPENDS_${PN} = "debugss-module-drv"
+RDEPENDS_${PN}_append_keystone = " temperature-module-drv"
+
+include dsptop.inc
+
+PARALLEL_MAKE = ""

recipes-bsp/dsptop/libulm_git.bb

@@ -0,0 +1,42 @@
+DESCRIPTION = "TI dsptop utility."
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://../debian/copyright;md5=309825aa8f5edfcf2c44912ac094b979"
+
+DEPENDS = "ti-cgt6x-native"
+PR = "${INC_PR}.0"
+
+S = "${WORKDIR}/git/dsptop/ulm"
+
+DEVICE=""
+DEVICE_dra7xx = "DRA7xx"
+DEVICE_keystone = "C66AK2Hxx"
+
+EXTRA_OEMAKE = "release DEVICE=${DEVICE} CROSS_COMPILE=${TARGET_PREFIX}"
+
+do_compile() {
+    oe_runmake arm XPORT_ONLY CC="${CC}"
+    oe_runmake dsp C6X_C_DIR=${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x/include
+}
+
+do_install() {
+    install -d ${D}${includedir}
+    install -d ${D}${libdir}
+    install -d ${D}${datadir}/ti/ulm
+    cp -f tiulm.h ${D}${includedir}
+    cp -f release/libtiulm.a ${D}${libdir}
+    cp -f tiulm.h ${D}${datadir}/ti/ulm
+    cp -f release/libtiulm.ae66 ${D}${datadir}/ti/ulm
+}
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN}-dev += "\
+    ${datadir}/ti/ulm \
+"
+
+include dsptop.inc
+
+ALLOW_EMPTY_${PN} = "1"
+
+PARALLEL_MAKE= ""

recipes-bsp/dsptop/temperature-module-drv_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "Smart Reflex Sub-System (SRSS) module driver for Keystone devices"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3"
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+PV_append = "+git${SRCPV}"
+
+S = "${WORKDIR}/git/temperature_module/temperature-mod"
+
+inherit module
+
+EXTRA_OEMAKE = "KVERSION=${KERNEL_VERSION} KERNEL_SRC=${STAGING_KERNEL_DIR}"
+
+COMPATIBLE_MACHINE = "keystone"
+
+include dsptop.inc

recipes-bsp/edma3-lld/edma3-lld-rtos_git.bb

@@ -0,0 +1,117 @@
+require edma3-lld.inc
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+PR = "${INC_PR}.1"
+
+DEPENDS = "ti-sysbios ti-xdctools gcc-arm-none-eabi-native ti-cgt-arm-native ti-cgt6x-native"
+
+COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+PLATFORMLIST = ""
+TARGETLIST = ""
+
+PLATFORMLIST_ti33x = " \
+        am335x-evm \
+"
+
+TARGETLIST_ti33x = " \
+        a8 \
+"
+
+PLATFORMLIST_ti43x = " \
+        am437x-evm \
+"
+
+TARGETLIST_ti43x = " \
+        arm9 \
+"
+
+PLATFORMLIST_omap-a15 = " \
+        tda2xx-evm \
+"
+
+TARGETLIST_omap-a15 = " \
+        66 \
+        a15 \
+        m4 \
+"
+
+PLATFORMLIST_keystone = " \
+        tci6636k2h-evm \
+        tci6638k2k-evm \
+        tci6630k2l-evm \
+        c66ak2e-evm \
+        tci66ak2g02-evm \
+"
+
+TARGETLIST_keystone = " \
+        66 \
+        a15 \
+"
+
+FORMAT="ELF"
+
+S = "${WORKDIR}/git"
+
+PARALLEL_MAKE = ""
+
+export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr"
+export XDCCGROOT = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+export CGTOOLS = "${XDCCGROOT}"
+export CGTOOLS_ELF = "${XDCCGROOT}"
+export CODEGEN_PATH_DSP = "${XDCCGROOT}"
+export CODEGEN_PATH_DSPELF = "${XDCCGROOT}"
+export TMS470_CGTOOLS = "${M4_TOOLCHAIN_INSTALL_DIR}"
+export UTILS_INSTALL_DIR = "${XDC_INSTALL_DIR}"
+export XDCPATH = "${XDCCGROOT}/include;${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages"
+export PATH := "${XDC_INSTALL_DIR}:${PATH}"
+export ROOTDIR="${S}"
+export INTERNAL_SW_ROOT="${S}"
+export CROSSCC="${TARGET_PREFIX}gcc"
+export CROSSAR="${TARGET_PREFIX}ar"
+export CROSSLNK="${TARGET_PREFIX}gcc"
+
+do_configure () {
+    sed -i -e "s|_config.bld|config.bld|g" ${S}/makerules/env.mk
+    sed -i -e "s|^edma3_lld_PATH =.*$|edma3_lld_PATH = ${S}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_M3 =.*$|CODEGEN_PATH_M3 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_M4 =.*$|CODEGEN_PATH_M4 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_A8 =.*$|CODEGEN_PATH_A8 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_A8_GCC =.*$|CODEGEN_PATH_A8_GCC = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_ARM9 =.*$|CODEGEN_PATH_ARM9 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_A9_GCC =.*$|CODEGEN_PATH_A9_GCC = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_A15 =.*$|CODEGEN_PATH_A15 = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_A15_GCC =.*$|CODEGEN_PATH_A15_GCC = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^UTILS_INSTALL_DIR =.*$|UTILS_INSTALL_DIR = ${XDC_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^bios_PATH =.*$|bios_PATH = ${SYSBIOS_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^xdc_PATH =.*$|xdc_PATH = ${XDC_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_DSP =.*$|CODEGEN_PATH_DSP = ${XDCCGROOT}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_DSPELF =.*$|CODEGEN_PATH_DSPELF = ${XDCCGROOT}|g" ${S}/makerules/env.mk
+
+    cd ${S}/packages
+    ${XDC_INSTALL_DIR}/xdc .interfaces -PR .
+}
+
+do_compile () {
+    cd ${S}/packages
+    for p in ${PLATFORMLIST}
+    do
+        for t in ${TARGETLIST}
+        do
+            make PLATFORM=${p} TARGET=${t} FORMAT=${FORMAT}
+        done
+    done
+}
+
+do_install () {
+    CP_ARGS="-Prf --preserve=mode,timestamps --no-preserve=ownership"
+    install -d ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE}
+    cp ${CP_ARGS} ${S}/* ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE}
+}
+
+INSANE_SKIP_${PN}-dev = "arch ldflags"
+
+ALLOW_EMPTY_${PN} = "1"
+FILES_${PN}-dev += "${EDMA3_LLD_INSTALL_DIR_RECIPE}"

recipes-bsp/edma3-lld/edma3-lld.inc

@@ -0,0 +1,17 @@
+DESCRIPTION = "TI EDMA3 low level driver and test code"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+
+EDMA3_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/edma3_lld.git"
+EDMA3_LLD_GIT_PROTOCOL = "git"
+EDMA3_LLD_GIT_BRANCH = "master"
+
+# Below commit ID corresponds to tag "DEV_EDMA3_LLD_02_12_03_27"
+EDMA3_LLD_SRCREV = "ed434ef4019b696b753dae0f98fe6594a7ce35a3"
+
+BRANCH = "${EDMA3_LLD_GIT_BRANCH}"
+SRC_URI = "${EDMA3_LLD_GIT_URI};protocol=${EDMA3_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${EDMA3_LLD_SRCREV}"
+
+PV = "2.12.03.27"
+INC_PR = "r0"

recipes-bsp/edma3-lld/edma3-lld_git.bb

@@ -0,0 +1,73 @@
+require edma3-lld.inc
+
+PR = "${INC_PR}.0"
+
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS = "common-csl-ip"
+
+PLATFORMLIST = "tci6636k2h-evm \
+	tci6636k2h-evm \
+	tci6638k2k-evm \
+	tci6630k2l-evm \
+	c66ak2e-evm \
+	tci66ak2g02-evm \
+	"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/*"
+
+S = "${WORKDIR}/git"
+
+do_compile () {
+	cd ${S}/packages
+	for platform in ${PLATFORMLIST}
+	do
+		ROOTDIR=${S} CROSSCC="${TARGET_PREFIX}gcc" CROSSAR="${TARGET_PREFIX}ar" \
+		CROSSLNK="${TARGET_PREFIX}gcc" INTERNAL_SW_ROOT="${S}" make \
+		PLATFORM="$platform" TARGET=a15 TOOLCHAIN_a15=GCC FORMAT=ELF \
+		SONAME=libedma3.so all
+	done
+}
+
+do_install () {
+	install -d ${D}/${libdir}
+
+	# Static Libraries
+	cp ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/edma3_lld_drv.aa15fg \
+		${D}/${libdir}/libedma3.a
+	cp ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/edma3_lld_rm.aa15fg \
+		${D}/${libdir}/libedma3rm.a
+
+	# Shared Libraries
+	cp -a ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/libedma* ${D}/${libdir}
+	cp -a ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/libedma* ${D}/${libdir}
+
+	# Copy Headers
+	install -d ${D}/${includedir}/ti/sdo/edma3/drv/
+	install -d ${D}/${includedir}/ti/sdo/edma3/rm
+	cp ${S}/packages/ti/sdo/edma3/drv/*.h ${D}/${includedir}/ti/sdo/edma3/drv/
+	cp ${S}/packages/ti/sdo/edma3/rm/*.h ${D}/${includedir}/ti/sdo/edma3/rm/
+
+	# Copy Sample Config
+	install -d ${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/evmTCI6636K2HSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/evmTCI6638K2KSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/evmTCI6630K2LSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmC66AK2E/evmC66AK2ESample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+
+	install -d ${D}/${bindir}
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/bin/tci6636k2h-evm/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/bin/tci6638k2k-evm/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/bin/tci6630k2l-evm/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmC66AK2E/bin/c66ak2e-evm/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg
+}

recipes-bsp/formfactor/formfactor_0.0.bbappend

@@ -1,3 +1 @@
-THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}"
-FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:"
-
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-bsp/gc320-drivers/ti-gc320-driver_5.0.11.p7.bb

@@ -0,0 +1,24 @@
+DESCRIPTION = "Kernel drivers for the Vivante GC320 chipset found in TI SoCs"
+HOMEPAGE = "https://git.ti.com/graphics/ti-gc320-driver"
+LICENSE = "MIT | GPLv2"
+LIC_FILES_CHKSUM = "file://../LICENSE;md5=78d9818a51b9a8e9bb89dea418bac297"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "d"
+PR = "${MACHINE_KERNEL_PR}"
+
+# Need to branch out with ${PV} var
+BRANCH = "ti-${PV}-k4.9"
+
+SRCREV = "295443bf56f2100b7b2714c2c30b31ba86e96a0c"
+
+SRC_URI = "git://git.ti.com/graphics/ti-gc320-driver.git;protocol=git;branch=${BRANCH}"
+S = "${WORKDIR}/git/src"
+
+EXTRA_OEMAKE += "-f Kbuild AQROOT=${S} KERNEL_DIR=${STAGING_KERNEL_DIR} TOOLCHAIN_PATH=${TOOLCHAIN_PATH} CROSS_COMPILE=${TARGET_PREFIX} ARCH_TYPE=${TARGET_ARCH}"
+
+do_install() {
+    install -d ${D}/${base_libdir}/modules/${KERNEL_VERSION}/extra
+    install -m 644 ${S}/galcore.ko ${D}/${base_libdir}/modules/${KERNEL_VERSION}/extra
+}

recipes-bsp/goodix-fw/goodix-fw_git.bb

@@ -0,0 +1,29 @@
+DESCRIPTION = "Goodix GT9271 config firmware"
+
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://LICENCE.Spectrum-GT9271;md5=2a6de6be7af1fe46370c684daf27c852"
+
+PV = "1.0.0.0"
+PR = "r0"
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "dra7xx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRCREV = "f1a8d1d0131f83bd1a775cde7075eb67c070892c"
+BRANCH ?= "ti-linux-firmware-4.1.y"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ti-linux-firmware.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+ORIGIN = "DRA71x-RevA-GT9271_SpecDig_Config.bin"
+TARGET = "goodix_9271_cfg.bin"
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware
+	install -m 0644 ${S}/ti-evm/${ORIGIN} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} = "${base_libdir}/firmware"

recipes-bsp/hplib/hplib-mod_git.bb

@@ -0,0 +1,22 @@
+DESCRIPTION = "TI High Performance Library kernel module"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/module/COPYING.txt;md5=c1c4d3453cddc5b7f0ce84a277e66779"
+
+DEPENDS = "hplib"
+
+include hplib.inc
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "b"
+PR = "${MACHINE_KERNEL_PR}"
+
+S ="${WORKDIR}/git/ti/runtime/hplib/module"
+EXTRA_OEMAKE = "KDIR=${STAGING_KERNEL_DIR} PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+inherit module
+
+do_install () {
+	oe_runmake install INSTALL_MOD_PATH="${D}"
+}
+
+KERNEL_MODULE_AUTOLOAD += "hplibmod"

recipes-bsp/hplib/hplib-test_git.bb

@@ -0,0 +1,32 @@
+DESCRIPTION = "TI High performance library test binaries"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/src/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+DEPENDS = "common-csl-ip qmss-lld sa-lld pktlib hplib"
+
+include hplib.inc
+
+PR = "${INC_PR}.0"
+
+CHOICELIST = "yes no"
+
+S = "${WORKDIR}/git/ti/runtime/hplib"
+
+EXTRA_OEMAKE += '-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}'
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			oe_runmake tests HPLIB_SRC_DIR=${S} USEDYNAMIC_LIB=$choice DEVICE="$device"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		oe_runmake installbin INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} DEVICE="$device"
+	done
+}

recipes-bsp/hplib/hplib.inc

@@ -0,0 +1,20 @@
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEVICELIST_k2hk = "k2h k2k"
+DEVICELIST_k2l-evm  = "k2l"
+DEVICELIST_k2e  = "k2e"
+
+HPLIB_GIT_URI = "git://git.ti.com/keystone-rtos/hplib.git"
+HPLIB_GIT_PROTOCOL = "git"
+HPLIB_GIT_BRANCH = "master"
+
+# Below Commit ID corresponds to "DEV.HPLIB.01.01.00.08"
+HPLIB_SRCREV = "5e9b27854f5d6f9f37a0ed8d7516d4874427cd8b"
+
+BRANCH = "${HPLIB_GIT_BRANCH}"
+SRC_URI = "${HPLIB_GIT_URI};protocol=${HPLIB_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${HPLIB_SRCREV}"
+
+PV = "01.01.00.08+git${SRCPV}"
+INC_PR = "r0"

recipes-bsp/hplib/hplib_git.bb

@@ -0,0 +1,33 @@
+DESCRIPTION = "TI High performance libraries"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/src/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld sa-lld pktlib"
+RDEPENDS_${PN} = "hplib-mod"
+
+include hplib.inc
+
+PR = "${INC_PR}.0"
+
+CHOICELIST = "yes no"
+
+S = "${WORKDIR}/git/ti/runtime/hplib"
+
+EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			oe_runmake lib HPLIB_SRC_DIR=${S} USEDYNAMIC_LIB=$choice DEVICE="$device"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		oe_runmake install INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} DEVICE="$device"
+	done
+}

recipes-bsp/hyplnk-lld/hyplnk-lld-test_git.bb

@@ -0,0 +1,26 @@
+include hyplnk-lld.inc
+
+PR = "${INC_PR}.0"
+
+DEPENDS = "common-csl-ip hyplnk-lld"
+
+do_compile () {
+	make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		HYPLNK_SRC_DIR="${S}"
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 tests examples \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+			DEVICE="$device" HYPLNK_SRC_DIR="${S}"
+	done
+}
+
+do_install () {
+    for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" DEVICE="$device" \
+			HYPLNK_SRC_DIR="${S}" \
+			INSTALL_BIN_BASE_DIR="${D}/${bindir}"
+	done
+}

recipes-bsp/hyplnk-lld/hyplnk-lld.inc

@@ -0,0 +1,29 @@
+DESCRIPTION = "TI Hyperlink Low Level Driver"
+LICENSE = "BSD-3-Clause"
+
+COMPATIBLE_MACHINE = "k2hk|k2e"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+LLDNAME="hyplnk"
+
+LIC_FILES_CHKSUM = "file://${WORKDIR}/${HYPLNK_GIT_DESTSUFFIX}/COPYING.txt;md5=623325cc19e613a4e770fbb749922592"
+
+HYPLNK_GIT_URI = "git://git.ti.com/keystone-rtos/hyplnk-lld.git"
+HYPLNK_GIT_PROTOCOL = "git"
+HYPLNK_GIT_BRANCH = "master"
+HYPLNK_GIT_DESTSUFFIX = "git/ti/drv/${LLDNAME}"
+
+# Following commit corresponds to tag DEV.HYPLNK_LLD.02.01.00.06
+HYPLNK_SRCREV = "a1953ca33114c5a4daca6289a7fb75b201f566d2"
+
+BRANCH="${HYPLNK_GIT_BRANCH}"
+SRC_URI = "${HYPLNK_GIT_URI};destsuffix=${HYPLNK_GIT_DESTSUFFIX};protocol=${HYPLNK_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${HYPLNK_SRCREV}"
+
+PV = "2.1.0.6"
+INC_PR = "r0"
+
+DEVICELIST_k2hk = "k2h k2k"
+DEVICELIST_k2e  = "k2e"
+
+S = "${WORKDIR}/${HYPLNK_GIT_DESTSUFFIX}"

recipes-bsp/hyplnk-lld/hyplnk-lld_git.bb

@@ -0,0 +1,32 @@
+include hyplnk-lld.inc
+
+PR = "${INC_PR}.1"
+
+DEPENDS = "common-csl-ip"
+
+do_compile () {
+	make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		HYPLNK_SRC_DIR="${S}"
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH="${STAGING_INCDIR}"\
+			DEVICE="$device" HYPLNK_SRC_DIR="${S}"
+	done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		INSTALL_INC_BASE_DIR="${D}/${includedir}" \
+		INSTALL_LIB_BASE_DIR="${D}${libdir}" HYPLNK_SRC_DIR="${S}"
+
+	# Set the generic device library symbolic link to default k2h
+	cd ${D}${libdir}
+
+	# Link only the first device in the list
+	for device in ${DEVICELIST}
+	do
+		ln -sf libhyplnk_${device}.so.1.0.0 libhyplnk_device.so.1
+		break
+	done
+	ln -sf libhyplnk_device.so.1 libhyplnk_device.so
+}

recipes-bsp/ipumm-fw/ipumm-fw_git.bb

@@ -0,0 +1,70 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM = "file://Texas_Instruments_ipumm_Manifest.pdf;md5=5cc572579f07af266ab57fc17d762c7f"
+
+COMPATIBLE_MACHINE = "dra7xx"
+
+RDEPENDS_${PN} = " libdce"
+
+SRC_URI = "git://git.ti.com/ivimm/ipumm.git;protocol=git"
+
+SRCREV = "fd441443a4289c801a0c8d9f00b6966f7fe3476c"
+
+S = "${WORKDIR}/git"
+
+PV = "3.00.13.00"
+PR = "r5"
+
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+inherit update-alternatives
+
+DEPENDS = "ti-xdctools ti-sysbios ti-codec-engine ti-framework-components ti-xdais ti-cgt-arm-native ti-ipc-rtos"
+
+export HWVERSION="ES10"
+export BIOSTOOLSROOT="${STAGING_DIR_TARGET}/usr/share/ti"
+
+export XDCVERSION="ti-xdctools-tree"
+export BIOSVERSION="ti-sysbios-tree"
+export IPCVERSION="ti-ipc-tree"
+export CEVERSION="ti-codec-engine-tree"
+export FCVERSION="ti-framework-components-tree"
+export XDAISVERSION="ti-xdais-tree"
+
+export TMS470CGTOOLPATH="${M4_TOOLCHAIN_INSTALL_DIR}"
+export IPCSRC="${STAGING_DIR_TARGET}/usr/share/ti/ti-ipc-tree"
+
+do_configure() {
+    oe_runmake unconfig
+    oe_runmake vayu_smp_config
+}
+
+do_compile() {
+    oe_runmake
+}
+
+TARGET = "dra7-ipu2-fw.xem4"
+TARGET_MAP = "platform/ti/dce/baseimage/package/cfg/out/ipu/release/ipu.xem4.map"
+
+do_install() {
+    install -d ${D}${base_libdir}/firmware
+    install -m 0644 ${S}/${TARGET} ${D}${base_libdir}/firmware/${TARGET}.${BPN}
+    install -m 0644 ${S}/${TARGET_MAP} ${D}${base_libdir}/firmware/${TARGET}.map
+}
+
+ALTERNATIVE_${PN} = "dra7-ipu2-fw.xem4"
+ALTERNATIVE_LINK_NAME[dra7-ipu2-fw.xem4] = "${base_libdir}/firmware/${TARGET}"
+ALTERNATIVE_TARGET[dra7-ipu2-fw.xem4] = "${base_libdir}/firmware/${TARGET}.${BPN}"
+ALTERNATIVE_PRIORITY = "20"
+
+FILES_${PN} += "${base_libdir}/firmware/*"

recipes-bsp/iqn2-lld/iqn2-lld-test_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "TI IQN2 peripheral module low level driver test binaries"
+
+DEPENDS = "common-csl-ip iqn2-lld dfe-lld"
+
+include iqn2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} IQN2_SRC_DIR=${WORKDIR}/git"
+
+do_compile () {
+	oe_runmake clean DEVICE=k2l
+	oe_runmake tests DEVICE=k2l
+}
+
+do_install () {
+	oe_runmake installbin DEVICE=k2l IQN2_SRC_DIR=${WORKDIR}/git INSTALL_BIN_BASE_DIR=${D}/${bindir}
+}

recipes-bsp/iqn2-lld/iqn2-lld.inc

@@ -0,0 +1,21 @@
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+LICENSE = "BSD-3-Clause"
+
+IQN2_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/iqn2-lld.git"
+IQN2_LLD_GIT_PROTOCOL = "git"
+IQN2_LLD_GIT_BRANCH = "master"
+IQN2_LLD_GIT_DESTSUFFIX = "git/ti/drv/iqn2"
+
+# Following commit corresponds to DEV.IQN_LLD.01.00.00.10
+IQN2_LLD_SRCREV = "dfc6bdd3b397b58e234f74eadda6d79ee399e682"
+
+BRANCH = "${IQN2_LLD_GIT_BRANCH}"
+SRC_URI = "${IQN2_LLD_GIT_URI};destsuffix=${IQN2_LLD_GIT_DESTSUFFIX};protocol=${IQN2_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${IQN2_LLD_SRCREV}"
+
+PV = "1.0.0.10"
+INC_PR = "r0"
+
+COMPATIBLE_MACHINE = "k2l-evm"
+
+S = "${WORKDIR}/${IQN2_LLD_GIT_DESTSUFFIX}"

recipes-bsp/iqn2-lld/iqn2-lld_git.bb

@@ -0,0 +1,22 @@
+DESCRIPTION = "TI IQN2 peripheral module low level driver"
+
+DEPENDS = "common-csl-ip"
+
+include iqn2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_configure () {
+	sed -i -e 's/march=armv7-a/march=armv7ve/' build/armv7/libiqn2_aearmv7.mk
+}
+
+do_compile () {
+	oe_runmake clean
+	oe_runmake lib
+}
+
+do_install () {
+	oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/mmap-lld/mmap-lld-test_git.bb

@@ -0,0 +1,44 @@
+DESCRIPTION = "TI KEYSTONE MMAP driver test binaries "
+include mmap-lld.inc
+
+PR = "${INC_PR}.0"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEPENDS="common-csl-ip mmap-lld"
+RDEPENDS_${PN}="uio-module-drv"
+
+DEVICELIST_k2hk = "k2h k2k"
+DEVICELIST_k2e = "k2e"
+DEVICELIST_k2l-evm = "k2l"
+DEVICELIST_k2g = "k2g"
+
+CHOICELIST = " yes \
+               no \
+"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+			DEVICE="$device" MPAX_SRC_DIR="${S}"
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples \
+				PDK_INSTALL_PATH=${STAGING_INCDIR} \
+				DEVICE="$device" MPAX_SRC_DIR="${S}" \
+				USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin \
+		PDK_INSTALL_PATH=${STAGING_INCDIR} \
+		DEVICE="$device" MPAX_SRC_DIR="${S}" \
+		INSTALL_BIN_BASE_DIR="${D}/${bindir}"
+	done
+}

recipes-bsp/mmap-lld/mmap-lld.inc

@@ -0,0 +1,22 @@
+LICENSE = "BSD-3-Clause"
+
+COMPATIBLE_MACHINE = "keystone"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=b3315b8190036fe1c6a8263d02e15606"
+
+MMAP_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/mmap-lld.git"
+MMAP_LLD_GIT_PROTOCOL = "git"
+MMAP_LLD_GIT_BRANCH = "master"
+MMAP_LLD_GIT_DESTSUFFIX = "git/ti/runtime/mmap"
+
+# Commit correspond to DEV.MMAP.02.00.00.07
+MMAP_LLD_SRCREV = "4426949ddfafdc8ea9408dbf5a642c3e840f4997"
+
+BRANCH="${MMAP_LLD_GIT_BRANCH}"
+SRC_URI = "${MMAP_LLD_GIT_URI};destsuffix=${MMAP_LLD_GIT_DESTSUFFIX};protocol=${MMAP_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${MMAP_LLD_SRCREV}"
+
+PV = "2.0.0.7"
+INC_PR = "r0"
+
+S = "${WORKDIR}/git/ti/runtime/mmap"

recipes-bsp/mmap-lld/mmap-lld_git.bb

@@ -0,0 +1,14 @@
+DESCRIPTION = "TI KEYSTONE mmap driver using Keystone MPAX Programming"
+include mmap-lld.inc
+
+PR = "${INC_PR}.0"
+
+DEPENDS="common-csl-ip"
+
+do_compile () {
+	make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR}
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/netcp-pa-fw/netcp-pa-fw_git.bb

@@ -0,0 +1,56 @@
+DESCRIPTION = "NETCP PA firmware for Keystone"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://LICENCE.ti-keystone;md5=3a86335d32864b0bef996bee26cc0f2c"
+
+PV = "3.0.1.17"
+PR = "r0"
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "k2hk|k2l-evm|k2e"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRCREV = "f43b4f61315e3642e05edb9c58b098f9cc69fdb6"
+BRANCH ?= "ti-linux-firmware-4.1.y"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ti-linux-firmware.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+FWBASENAME = " \
+ks2_pa_eg0_pdsp0 \
+ks2_pa_eg0_pdsp1 \
+ks2_pa_eg0_pdsp2 \
+ks2_pa_eg1_pdsp0 \
+ks2_pa_eg2_pdsp0 \
+ks2_pa_in0_pdsp0 \
+ks2_pa_in0_pdsp1 \
+ks2_pa_in1_pdsp0 \
+ks2_pa_in1_pdsp1 \
+ks2_pa_in2_pdsp0 \
+ks2_pa_in3_pdsp0 \
+ks2_pa_in4_pdsp0 \
+ks2_pa_in4_pdsp1 \
+ks2_pa_post_pdsp0 \
+ks2_pa_post_pdsp1 \
+"
+
+FWBASENAME_k2hk = " \
+ks2_pa_pdsp0_classify1 \
+ks2_pa_pdsp1_classify1 \
+ks2_pa_pdsp2_classify1 \
+ks2_pa_pdsp3_classify2 \
+ks2_pa_pdsp4_pam \
+ks2_pa_pdsp5_pam \
+"
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware
+	for f in ${FWBASENAME}; do
+		install -m 0644 ${S}/ti-keystone/$f.bin ${D}${base_libdir}/firmware/$f.bin
+	done
+}
+
+FILES_${PN} = "${base_libdir}/firmware"