am65xx-hs-evm: add DTB/DTBO load addresses and offset

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

.gitignore

@@ -1,6 +0,0 @@
-*.pyc
-*.pyo
-*.swp
-*.orig
-*.rej
-*~

README

@@ -1,4 +1,25 @@
-Collection of layers for the OE-core universe
+The official OpenEmbedded/Yocto BSP layer for Texas Instruments platforms.
 
-Please see the respective READMEs in the layer subdirectories
+It is hosted on http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/ with the
+source repository at git://git.yoctoproject.org/meta-ti
 
+
+This layer depends on:
+
+URI: git://git.openembedded.org/openembedded-core
+layers: meta
+branch: thud
+
+
+The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
+distributions and layer stacks, such as:
+distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
+
+Please follow the recommended setup procedures of your OE distribution.
+
+
+Send pull requests, patches, comments or questions to meta-ti@yoctoproject.org
+Please note - meta-ti mailing list requires subscription for posting:
+https://lists.yoctoproject.org/listinfo/meta-ti
+
+Maintainers: Denys Dmytriyenko <denys@ti.com>

TODO

@@ -1,2 +0,0 @@
-This TODO list allows us to track certain actions and lists of patches that
-need to be removed at a future date.

check_yocto_rules.json

@@ -1,52 +0,0 @@
-{
-    "APPEND-1" : {
-        "skip_vars" : [ "ALTERNATIVE", "FILES", "INSANE_SKIP", "RDEPENDS", "RRECOMMENDS" ]
-    },
-    "APPEND-2" : {
-        "skip_vars" : [ "KERNEL_LOCALVERSION", "PR", "PV", "S" ],
-        "file_regex" : {
-            "meta-ti-bsp\\/recipes-graphics\\/mesa\\/mesa-pvr_\\S+\\.bb" : {
-                "skip_vars": [ "GALLIUMDRIVERS", "VULKAN_DRIVERS" ]
-            },
-            "meta-ti-bsp\\/recipes-graphics\\/mesa\\/mesa-pvr\\.inc" : {
-                "skip_vars": [ "TOOLS", "TOOLS_DEPS", "GALLIUMDRIVERS", "VULKAN_DRIVERS" ]
-            }
-        }
-    },
-    "GUARD-1" : {
-        "skip_files" : [
-            "meta-ti-bsp/recipes-core/udev/eudev_%.bbappend",
-            "meta-ti-bsp/recipes-devtools/binutils/binutils-cross-canadian_%.bbappend",
-            "meta-ti-bsp/recipes-security/optee/optee-%.bbappend",
-            "meta-ti-bsp/dynamic-layers/openembedded-layer/recipes-bsp/u-boot/u-boot-ti-%.bbappend",
-            "meta-ti-bsp/dynamic-layers/openembedded-layer/recipes-ti/initramfs/packagegroup-ti-core-initramfs.bbappend"
-        ]
-    },
-    "GUARD-2" : {
-        "skip_vars" : [ "k3" , "ti-soc" ]
-    },
-    "GUARD-3" : {
-        "skip_files" : [
-            "meta-ti-bsp/recipes-security/optee/optee-os-tadevkit_%.bbappend"
-        ]
-    },
-    "PV-1" :{
-        "skip_files" : [
-            "meta-ti-bsp/recipes-kernel/linux/ti-kernel-fitimage.bb",
-            "meta-ti-bsp/recipes-multimedia/ti-multimedia-udev/ti-multimedia-udev.bb",
-            "meta-ti-bsp/recipes-ti/initramfs/packagegroup-ti-core-initramfs.bb",
-            "meta-ti-bsp/recipes-ti/initramfs/ti-core-initramfs.bb",
-            "meta-ti-bsp/recipes-ti/secdev/ti-k3-secdev_git.bb",
-            "meta-ti-extras/recipes-connectivity/cc33xx-target-scripts/cc33xx-target-scripts_git.bb",
-            "meta-ti-extras/recipes-ti/beagleboard/beaglebone-capes.bb",
-            "meta-ti-extras/recipes-ti/beagleboard/beaglebone-getting-started.bb",
-            "meta-ti-extras/recipes-ti/ipc/ti-ipc-examples-linux_git.bb",
-            "meta-ti-extras/recipes-ti/ipc/ti-ipc-rtos_git.bb"
-        ]
-    },
-    "SUMMARY-1" : {
-        "skip_files" : [
-            "meta-ti-extras/recipes-ti/ipc/ti-ipc-rtos_git.bb"
-        ]
-    }
-}

classes/ti-pdk.bbclass

@@ -0,0 +1,141 @@
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+inherit perlnative
+
+DEPENDS = "ti-xdctools-native ti-cg-xml-native ti-sysbios common-csl-ip-rtos libxml-simple-perl-native gcc-arm-none-eabi-native ti-cgt6x-native ti-cgt-pru-native ti-pdk-build-rtos doxygen-native"
+
+DEPENDS_append_omap-a15 = " ti-cgt-arm-native"
+DEPENDS_remove_ti33x = "ti-cgt6x-native"
+DEPENDS_remove_ti43x = "ti-cgt6x-native"
+DEPENDS_append_omapl1 = " ti-cgt-arm-native"
+DEPENDS_remove_k3 = "gcc-arm-none-eabi-native ti-cgt6x-native"
+DEPENDS_append_k3 = " ti-cgt-arm-native gcc-linaro-baremetal-aarch64-native"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+
+# HTML hyperlink text
+PDK_COMP_LINK_TEXT ?= ""
+
+DOC_FILE = "API_Documentation_${PN}.html"
+
+create_doc_link () {
+    PDK_COMP_DIR=`get_build_dir_bash`
+
+    echo "<a href=\"${PDK_COMP_DIR}/docs/doxygen/html/index.html\">${PDK_COMP_LINK_TEXT}</a>" >> ${D}${PDK_INSTALL_DIR_RECIPE}/packages/.extras/doc/${DOC_FILE}
+}
+
+get_build_dir_bash() {
+  if [ -f ${S}/package.xdc ]
+  then
+    grep '^package' ${S}/package.xdc | sed -e 's|\[.*$||' | awk '{ print $2 }' | sed -e 's|\.|/|g'
+  else
+    echo ${S}
+    return 1
+  fi
+}
+
+export CROSS_TOOL_PRFX="arm-none-eabi-"
+export TOOLCHAIN_PATH_A8 = "${GCC_ARM_NONE_TOOLCHAIN}"
+export TOOLCHAIN_PATH_A9 = "${GCC_ARM_NONE_TOOLCHAIN}"
+export TOOLCHAIN_PATH_A15 = "${GCC_ARM_NONE_TOOLCHAIN}"
+export TOOLCHAIN_PATH_M4 = "${M4_TOOLCHAIN_INSTALL_DIR}"
+export TOOLCHAIN_PATH_Arm9 = "${M4_TOOLCHAIN_INSTALL_DIR}"
+export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+export TOOLCHAIN_PATH_EVE = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-arp32"
+export CL_PRU_INSTALL_PATH = "${TI_CGT_PRU_INSTALL_DIR}"
+export TOOLCHAIN_PATH_GCC_ARCH64 = "${GCC_LINARO_BAREMETAL_AARCH64_TOOLCHAIN}"
+export TOOLCHAIN_PATH_R5 = "${M4_TOOLCHAIN_INSTALL_DIR}"
+
+export ROOTDIR = "${B}"
+export BIOS_INSTALL_PATH = "${SYSBIOS_INSTALL_DIR}"
+export XDC_INSTALL_PATH = "${XDC_INSTALL_DIR}"
+export PDK_INSTALL_PATH = "${PDK_INSTALL_DIR}/packages"
+
+export XDCPATH = "${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages;${PDK_INSTALL_DIR}/packages"
+export SECTTI="perl ${CG_XML_INSTALL_DIR}/ofd/sectti.pl"
+
+TI_PDK_XDCMAKE ?= "1"
+
+# By default, only build the cores with available toolchains
+TI_PDK_LIMIT_CORES ?= "a15_0 ipu1_0 ipu1_1 ipu2_0 ipu2_1 c66x c66xdsp_1 c66xdsp_2 arm9_0 c674x a9host a8host pru_0 pru_1"
+TI_PDK_LIMIT_SOCS ?= ""
+TI_PDK_LIMIT_BOARDS ?= ""
+TI_PDK_MAKE_TARGET ?= "release"
+TI_PDK_EXTRA_MAKE ?= ""
+TI_PDK_DOXYGEN_SUPPORT ?= "1"
+
+TI_PDK_XDC_ARGS ?= "${TI_PDK_LIMIT_SOCS}"
+
+PARALLEL_XDC = "--jobs=${BB_NUMBER_THREADS}"
+PARALLEL_MAKE = ""
+
+def get_doxygen_support(d):
+    if d.getVar('TI_PDK_DOXYGEN_SUPPORT') == '1':
+        return ''
+    return 'DOXYGEN_SUPPORT=no'
+
+EXTRA_OEMAKE = " \
+    LIMIT_SOCS="${TI_PDK_LIMIT_SOCS}" \
+    LIMIT_BOARDS="${TI_PDK_LIMIT_BOARDS}" \
+    LIMIT_CORES="${TI_PDK_LIMIT_CORES}" \
+    ${TI_PDK_EXTRA_MAKE} \
+    ${@get_doxygen_support(d)} \
+"
+
+do_configure() {
+    BUILD_DIR=${B}/`get_build_dir_bash`
+
+    mkdir -p ${BUILD_DIR}
+    cp -r ${S}/* ${BUILD_DIR}
+
+    if [ "${TI_PDK_XDCMAKE}" == "1" ]
+    then
+        cd ${BUILD_DIR}
+
+        sed -i "s/\ \"\.\\\\\\\\\"\ +//" src/Module.xs
+        find -name "*.xs" -exec sed -i "s/ofd6x\.exe/ofd6x/" {} \;
+        find -name "*.xs" -exec sed -i "s/sectti\.exe/sectti/" {} \;
+        find -name "*.xs" -exec sed -i "/\.chm/d" {} \;
+        find -name "*.xs" -exec sed -i "s/pasm\_dos/pasm\_linux/" {} \;
+
+        cd ${B}
+        ${XDC_INSTALL_DIR}/xdc clean ${PARALLEL_XDC} -PR .
+    else
+        if [ "${CLEANBROKEN}" != "1" ]
+        then
+            cd ${BUILD_DIR}
+            oe_runmake clean
+            cd "${B}"
+        fi
+    fi
+
+}
+
+do_compile() {
+
+    if [ "${TI_PDK_XDCMAKE}" == "1" ]
+    then
+        ${XDC_INSTALL_DIR}/xdc all ${PARALLEL_XDC} XDCARGS="${TI_PDK_XDC_ARGS}" ROOTDIR="${ROOTDIR}" -PR .
+        ${XDC_INSTALL_DIR}/xdc release XDCARGS="${TI_PDK_XDC_ARGS}" -PR .
+    else
+        BUILD_DIR=${B}/`get_build_dir_bash`
+        cd ${BUILD_DIR}
+
+        oe_runmake ${TI_PDK_MAKE_TARGET}
+    fi
+}
+
+do_install () {
+    install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages
+    find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages \;
+    
+    if [ "${PDK_COMP_LINK_TEXT}" != "" ]
+    then
+        install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages/.extras/doc
+        create_doc_link
+    fi
+}
+
+FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages"

conf/layer.conf

@@ -0,0 +1,33 @@
+# We have a conf and classes directory, append to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have a recipes directory, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "meta-ti"
+BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-ti = "6"
+
+LAYERSERIES_COMPAT_meta-ti = "sumo thud"
+
+LICENSE_PATH += "${LAYERDIR}/licenses"
+
+LAYERDEPENDS_meta-ti = "core"
+
+SIGGEN_EXCLUDERECIPES_ABISAFE += " \
+    ti-sgx-ddk-km \
+    ti-sgx-ddk-um \
+    ti-ipc \
+    ti-ipc-rtos \
+    cmem-mod \
+    hplib-mod \
+    gdbserverproxy-module-drv \
+    debugss-module-drv \
+    uio-module-drv \
+    mpm-transport \
+    cppi-lld \
+    qmss-lld \
+    multiprocmgr \
+"
+
+HOSTTOOLS_NONFATAL += "truncate xxd comm"

conf/machine/am335x-evm.conf

@@ -4,12 +4,14 @@
 
 require conf/machine/include/ti33x.inc
 
-MACHINE_FEATURES += "screen touchscreen"
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
 
-IMAGE_FSTYPES += "ubifs ubi"
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
 
 # Normally AM335 boards use ttyS0, but ICE uses ttyS3, so try both
 SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS3"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
 
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more
@@ -22,7 +24,7 @@ SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS3"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS ?= "-F -m 2048 -e 126976 -c 18000"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 9200"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -30,4 +32,4 @@ MKUBIFS_ARGS ?= "-F -m 2048 -e 126976 -c 18000"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 # UBI: VID header offset:          2048 (aligned 2048)
-UBINIZE_ARGS ?= "-m 2048 -p 128KiB -s 512 -O 2048"
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/am335x-hs-evm.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: AM335x HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM435x HS EVM
+
+require conf/machine/am335x-evm.conf
+
+UBOOT_MACHINE = ""
+# Last config in the list is default
+UBOOT_CONFIG ??= "uart mmc"
+UBOOT_CONFIG[uart] = "am335x_hs_evm_uart_config"
+UBOOT_CONFIG[mmc] = "am335x_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am3x"

conf/machine/am3517-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: AM3517 EVM
+#@DESCRIPTION: Machine configuration for the TI Sitara AM3517 EVM
+
+require conf/machine/include/omap3.inc
+
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+USE_VT = "2"
+
+KERNEL_DEVICETREE = "am3517-evm.dtb"
+
+UBOOT_MACHINE = "am3517_evm_config"
+XLOAD_MACHINE = "am3517evm_config"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"

conf/machine/am37x-evm.conf

@@ -0,0 +1,31 @@
+#@TYPE: Machine
+#@NAME: AM37x EVM
+#@DESCRIPTION: Machine configuration for the TI AM37x EVM
+
+require conf/machine/include/omap3.inc
+
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+
+KERNEL_DEVICETREE = "omap3-evm-37xx.dtb"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"

conf/machine/am437x-evm.conf

@@ -4,9 +4,10 @@
 
 require conf/machine/include/ti43x.inc
 
+MACHINE_GUI_CLASS = "smallscreen"
 MACHINE_FEATURES += "touchscreen"
 
-IMAGE_FSTYPES += "ubifs ubi"
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
 
 SERIAL_CONSOLES = "115200;ttyS0"
 
@@ -21,7 +22,7 @@ SERIAL_CONSOLES = "115200;ttyS0"
 # UBI: logical eraseblock size:    253952 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 994 LEBs
-MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 10000"
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 4400"
 
 # do ubiattach /dev/ubi_ctrl -m 11 -O 4096
 # from dmesg:

conf/machine/am437x-hs-evm.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: AM437x HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM437x HS EVM
+
+require conf/machine/am437x-evm.conf
+
+UBOOT_MACHINE = "am43xx_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am4x"
+
+OPTEEMACHINE = "ti"
+OPTEEFLAVOR = "am43xx"
+OPTEEOUTPUTMACHINE = "ti"

conf/machine/am57xx-evm.conf

@@ -2,47 +2,25 @@
 #@NAME: AM57xx EVM
 #@DESCRIPTION: Machine configuration for the TI AM57xx EVM
 
-require conf/machine/include/am57xx.inc
+require conf/machine/include/dra7xx.inc
 
 MACHINE_FEATURES += "touchscreen"
 
+IMAGE_FSTYPES += "tar.xz"
+
 SERIAL_CONSOLES = "115200;ttyS2"
 
-KERNEL_DEVICETREE_PREFIX = " \
-    am57 \
-    ov10635 \
-    ti/am57 \
-    ti/lcd \
-    ti/ov10635 \
-    ti/omap/am57 \
-"
-
-KERNEL_DEVICETREE_DTBMERGE = " \
-    am57xx-evm.dtb \
-    am57xx-evm-reva3.dtb \
-    ti/omap/am57xx-evm.dtb \
-    ti/omap/am57xx-evm-reva3.dtb \
-"
-
 KERNEL_DEVICETREE = " \
-    ti/omap/am571x-idk-touchscreen.dtbo \
-    ti/omap/am571x-idk.dtb \
-    ti/omap/am5729-beagleboneai.dtb \
-    ti/omap/am572x-idk-touchscreen.dtbo \
-    ti/omap/am572x-idk.dtb \
-    ti/omap/am574x-idk.dtb \
-    ti/omap/am57xx-beagle-x15-revb1.dtb \
-    ti/omap/am57xx-beagle-x15-revc.dtb \
-    ti/omap/am57xx-beagle-x15.dtb \
-    ti/omap/am57xx-cl-som-am57x.dtb \
-    ti/omap/am57xx-evm-reva3.dtb \
-    ti/omap/am57xx-evm.dtb \
-    ti/omap/am57xx-evm.dtbo \
-    ti/omap/am57xx-idk-lcd-osd101t2045.dtbo \
-    ti/omap/am57xx-idk-lcd-osd101t2587.dtbo \
-    ti/omap/am57xx-sbc-am57x.dtb \
+    am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \
+    am57xx-evm.dtb am57xx-evm-cam-mt9t111.dtb am57xx-evm-cam-ov10635.dtb \
+    am57xx-evm-reva3.dtb am57xx-evm-reva3-cam-mt9t111.dtb am57xx-evm-reva3-cam-ov10635.dtb \
+    am571x-idk.dtb am571x-idk-lcd-osd101t2045.dtb am571x-idk-lcd-osd101t2587.dtb \
+    am572x-idk.dtb am572x-idk-lcd-osd101t2045.dtb am572x-idk-lcd-osd101t2587.dtb \
+    am574x-idk.dtb am574x-idk-lcd-osd101t2587.dtb \
 "
 
+KERNEL_DEVICETREE += "${@oe.utils.conditional('ENABLE_TI_UIO_DEVICES', '1', 'am574x-idk-pru-excl-uio.dtb am572x-idk-pru-excl-uio.dtb am571x-idk-pru-excl-uio.dtb', '', d)}"
+
 UBOOT_MACHINE = "am57xx_evm_config"
 
 # UBI information.  Note that this is board and kernel specific.  Changes
@@ -65,3 +43,7 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
 # UBI: sub-page size:              512
 # UBI: VID header offset:          2048 (aligned 2048)
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "am571x am572x am574x"
+TI_PDK_LIMIT_BOARDS = "evmAM571x evmAM572x idkAM571x idkAM572x idkAM574x"

conf/machine/am57xx-hs-evm.conf

@@ -0,0 +1,19 @@
+#@TYPE: Machine
+#@NAME: AM57xx HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM57xx HS EVM
+
+require conf/machine/am57xx-evm.conf
+
+UBOOT_MACHINE = "am57xx_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_AUTO}/am5x"
+
+OPTEEMACHINE = "ti"
+OPTEEFLAVOR = "am57xx"
+OPTEEOUTPUTMACHINE = "ti"
+OPTEEPAGER = "y"

conf/machine/am65xx-evm.conf

@@ -0,0 +1,33 @@
+#@TYPE: Machine
+#@NAME: AM65xx EVM
+#@DESCRIPTION: Machine configuration for the TI AM65xx EVM
+
+require conf/machine/include/am65xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "tar.xz wic.xz"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+
+KERNEL_DEVICETREE = " \
+    ti/k3-am654-base-board.dtb ti/k3-am654-gp.dtbo \
+    ti/k3-am654-evm-hdmi.dtbo ti/k3-am654-idk.dtbo \
+    ti/k3-am654-evm-csi2-ov490.dtbo ti/k3-am654-evm-csi2-ov5640.dtbo \
+    ti/k3-am654-evm-oldi-lcd1evm.dtbo ti/k3-am654-evm-tc358876.dtbo \
+    ti/k3-am654-pcie-usb2.dtbo ti/k3-am654-pcie-usb3.dtbo \
+"
+
+UBOOT_MACHINE = "am65x_evm_a53_defconfig"
+
+OPTEEMACHINE = "k3"
+OPTEEFLAVOR = "am65x"
+OPTEEOUTPUTMACHINE = "k3"
+
+# Please note that booting AM65xx platform also requires
+# tiboot3.bin and sysfw.itb, which are provided by meta-arago
+# u-boot-k3-r5 and ti-sci-fw recipes
+IMAGE_BOOT_FILES = "tispl.bin u-boot.img"
+WKS_FILE = "sdimage-bootpart.wks"
+
+do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot u-boot:do_deploy"

conf/machine/am65xx-hs-evm.conf

@@ -0,0 +1,26 @@
+#@TYPE: Machine
+#@NAME: AM65xx HS EVM
+#@DESCRIPTION: Machine configuration for the TI AM65xx HS EVM
+
+require conf/machine/am65xx-evm.conf
+
+UBOOT_MACHINE = "am65x_hs_evm_a53_defconfig"
+
+UBOOT_ENTRYPOINT =       "0x80080000"
+UBOOT_LOADADDRESS =      "0x80080000"
+UBOOT_RD_LOADADDRESS =   "0x84000000"
+UBOOT_RD_ENTRYPOINT =    "0x84000000"
+UBOOT_DTB_LOADADDRESS =  "0x83000000"
+UBOOT_DTBO_LOADADDRESS = "0x83080000"
+UBOOT_DTBO_OFFSET =      "0x00010000"
+
+SPL_BINARY = "tispl.bin_HS"
+SPL_BINARYNAME = "tispl.bin"
+UBOOT_BINARY = "u-boot.img_HS"
+IMAGE_BOOT_FILES = "${UBOOT_BINARY}"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_K3}"
+
+OPTEEMACHINE = "k3"
+OPTEEFLAVOR = "am65x"
+OPTEEOUTPUTMACHINE = "k3"

conf/machine/beagle-x15.conf

@@ -1,29 +1,22 @@
 #@TYPE: Machine
-#@NAME: DRA7xx EVM
-#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+#@NAME: BeagleBoard X15
+#@DESCRIPTION: Machine configuration for the BeagleBoard X15
 
-require conf/machine/include/am57xx.inc
+require conf/machine/include/dra7xx.inc
 
-MACHINE_FEATURES += "touchscreen"
+KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb"
 
-SERIAL_CONSOLES = "115200;ttyS0"
+MACHINE_GUI_CLASS = "bigscreen"
 
-KERNEL_DEVICETREE_PREFIX = " \
-    dra7 \
-    ti/dra7 \
-    ti/lcd \
-    ti/omap/dra7 \
-"
+SERIAL_CONSOLES = "115200;ttyS2"
 
-KERNEL_DEVICETREE = " \
-    ti/omap/dra7-evm.dtb \
-    ti/omap/dra71-evm.dtb \
-    ti/omap/dra72-evm.dtb \
-    ti/omap/dra72-evm-revc.dtb \
-    ti/omap/dra76-evm.dtb \
-"
+UBOOT_MACHINE = "am57xx_evm_config"
 
-UBOOT_MACHINE = "dra7xx_evm_config"
+WKS_FILE = "sdimage-bootpart.wks"
+IMAGE_BOOT_FILES = "MLO u-boot.img"
+IMAGE_FSTYPES += "tar.xz wic.xz"
+
+do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"
 
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more

conf/machine/beagleboard.conf

@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: Beagleboard machine
+#@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board 
+
+require conf/machine/include/omap3.inc
+
+# Only has DVI connector for external screen
+MACHINE_GUI_CLASS = "bigscreen"
+
+IMAGE_FSTYPES += "tar.gz ubi"
+EXTRA_IMAGECMD_jffs2 = "-lnp"
+
+KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+
+UBOOT_MACHINE = "omap3_beagle_config"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+# 
+# Beagleboard C5 has 3998 LEBS (490MiB)
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
+
+# For a modularized kernel we want to drag in networking, sound, rtc etc."
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl \
+  kernel-module-snd-soc-omap kernel-module-snd-soc-omap-mcbsp kernel-module-snd-soc-omap3beagle"

conf/machine/beaglebone.conf

@@ -0,0 +1,26 @@
+#@TYPE: Machine
+#@NAME: BeagleBone machine
+#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board
+
+require conf/machine/include/ti33x.inc
+
+KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblue.dtb \
+                    am335x-boneblack.dtb am335x-boneblack-wireless.dtb \
+                    am335x-bonegreen.dtb am335x-bonegreen-wireless.dtb"
+
+# Only has DVI connector for external screen
+MACHINE_GUI_CLASS = "bigscreen"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+WKS_FILE = "sdimage-bootpart.wks"
+
+do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"
+IMAGE_BOOT_FILES ?= "u-boot.${UBOOT_SUFFIX} ${SPL_BINARY}"
+
+IMAGE_FSTYPES += "tar.xz wic.xz"
+
+IMAGE_INSTALL_append = " kernel-devicetree kernel-image-zimage"
+
+# Refine the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_BOARDS = "bbbAM335x"

conf/machine/c665x-evm.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Keystone 1 c665x machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 1 c665x EVM
+
+require conf/machine/include/c66x.inc
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "c6657"
+TI_PDK_LIMIT_BOARDS = "evmC6657"

conf/machine/c667x-evm.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Keystone 1 c667x machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 1 c667x EVM
+
+require conf/machine/include/c66x.inc
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "c6678"
+TI_PDK_LIMIT_BOARDS = "evmC6678"

conf/machine/dra7xx-evm.conf

@@ -0,0 +1,47 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "tar.xz"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+KERNEL_DEVICETREE = " \
+    dra7-evm.dtb dra7-evm-lcd-osd101t2045.dtb dra7-evm-lcd-osd101t2587.dtb \
+    dra71-evm.dtb dra71-evm-nand.dtb dra71-evm-lcd-auo-g101evn01.0.dtb \
+    dra72-evm.dtb dra72-evm-lcd-osd101t2045.dtb dra72-evm-lcd-osd101t2587.dtb \
+    dra72-evm-revc.dtb dra72-evm-revc-lcd-osd101t2045.dtb dra72-evm-revc-lcd-osd101t2587.dtb \
+    dra76-evm.dtb dra76-evm-tfp410.dtb dra76-evm-ov490.dtb dra76-evm-ov5640.dtb \
+    dra76-evm-tfp410-ov490.dtb dra76-evm-tfp410-ov5640.dtb \
+"
+
+UBOOT_MACHINE = "dra7xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_BOARDS = "evmDRA72x evmDRA75x evmDRA78x"
+TI_PDK_LIMIT_SOCS = "dra72x dra75x dra78x"

conf/machine/dra7xx-hs-evm.conf

@@ -0,0 +1,19 @@
+#@TYPE: Machine
+#@NAME: DRA7xx HS EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx HS EVM
+
+require conf/machine/dra7xx-evm.conf
+
+UBOOT_MACHINE = "dra7xx_hs_evm_config"
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_AUTO}/dra7"
+
+OPTEEMACHINE = "ti"
+OPTEEFLAVOR = "dra7xx"
+OPTEEOUTPUTMACHINE = "ti"
+OPTEEPAGER = "y"

conf/machine/include/am65xx.inc

@@ -0,0 +1,7 @@
+require conf/machine/include/k3.inc
+SOC_FAMILY_append = ":am65xx"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "am65xx"
+TI_PDK_LIMIT_BOARDS = "am65xx_evm am65xx_idk"
+TI_PDK_LIMIT_CORES = "mcu1_0 mpu1_0"

conf/machine/include/c66x.inc

@@ -0,0 +1,9 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":c66x"
+
+# HACK: The c66x family is composed of devices with only DSP cores, and no ARM
+#       cores. The Linux kernel is not supported on these machines.
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-dummy"
+EXTRA_IMAGEDEPENDS = ""
+
+IMAGE_FSTYPES = "tar.xz"

conf/machine/include/davinci.inc

@@ -0,0 +1,22 @@
+require conf/machine/include/tune-arm926ejs.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r54"
+
+KERNEL_IMAGETYPE = "zImage"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+UBOOT_MACHINE = "davinci_dvevm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+SERIAL_CONSOLES ?= "115200;ttyS0"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+
+MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa"

conf/machine/include/dra7xx.inc

@@ -0,0 +1,4 @@
+require conf/machine/include/omap-a15.inc
+SOC_FAMILY_append = ":dra7xx"
+
+MACHINE_FEATURES += "pci"

conf/machine/include/k2e.inc

@@ -0,0 +1,6 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2e"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "k2e"
+TI_PDK_LIMIT_BOARDS = "evmK2E"

conf/machine/include/k2g.inc

@@ -0,0 +1,6 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2g"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "k2g"
+TI_PDK_LIMIT_BOARDS = "evmK2G iceK2G"

conf/machine/include/k2hk.inc

@@ -0,0 +1,6 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2hk"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "k2h k2k"
+TI_PDK_LIMIT_BOARDS = "evmK2H evmK2K"

conf/machine/include/k2l.inc

@@ -0,0 +1,6 @@
+require conf/machine/include/keystone.inc
+SOC_FAMILY_append = ":k2l"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "k2l"
+TI_PDK_LIMIT_BOARDS = "evmK2L"

conf/machine/include/k3.inc

@@ -0,0 +1,33 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":k3"
+
+require conf/machine/include/arm/arch-arm64.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r0"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "Image"
+KERNEL_IMAGETYPES = "Image vmlinux.gz"
+
+UBOOT_ARCH = "arm"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+SPL_BINARY = "tispl.bin"
+UBOOT_SUFFIX = "img"
+
+EXTRA_IMAGEDEPENDS += "virtual/bootloader"
+
+MACHINE_GUI_CLASS = "smallscreen"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet pci gpu"
+# Not ready yet - dsp mmip

conf/machine/include/keystone.inc

@@ -0,0 +1,30 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":keystone"
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa15.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r10"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "bin"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "boot-monitor"
+
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci dsp"
+MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"

conf/machine/include/omap-a15.inc

@@ -0,0 +1,39 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":omap-a15"
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa15.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r7"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_IMAGETYPES = "zImage uImage"
+KERNEL_CLASSES += "kernel-uimage"
+
+UBOOT_ARCH = "arm"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+EXTRA_IMAGEDEPENDS += "virtual/bootloader"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-video-fbdev"
+
+MACHINE_GUI_CLASS = "smallscreen"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet gpu mmip dsp"

conf/machine/include/omap3.inc

@@ -0,0 +1,42 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":omap3"
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+MACHINE_GUI_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r127"
+
+KERNEL_IMAGETYPE = "zImage"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb omap3-evm.dtb omap3-evm-37xx.dtb am3517-evm.dtb"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "omap3_evm_config"
+XLOAD_MACHINE = "omap3evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# If SPL is not used, may need to add x-load
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen/ethernet for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa gpu"

conf/machine/include/omap4.inc

@@ -0,0 +1,26 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":omap4"
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa9.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-video-fbdev"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r4"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_MACHINE = "omap4_panda_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "u-boot"

conf/machine/include/omapl1.inc

@@ -0,0 +1,2 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":omapl1"

conf/machine/include/omapl137.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/omapl1.inc
+SOC_FAMILY_append = ":omapl137"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "omapl137"

conf/machine/include/omapl138.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/omapl1.inc
+SOC_FAMILY_append = ":omapl138"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "omapl138"

conf/machine/include/ti-soc.inc

@@ -0,0 +1,4 @@
+# This is a generic TI SOC family. It is a superset of all other SOCs
+# and platforms defined in meta-ti to allow BSP-level overrides.
+SOC_FAMILY = "ti-soc"
+require conf/machine/include/soc-family.inc

conf/machine/include/ti33x.inc

@@ -0,0 +1,59 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":ti33x"
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+MACHINE_GUI_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r22"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+KERNEL_DEVICETREE = " \
+    am335x-evm.dtb am335x-evmsk.dtb \
+    am335x-icev2.dtb am335x-icev2-prueth.dtb \
+    am335x-pocketbeagle.dtb am335x-bone.dtb am335x-boneblue.dtb \
+    am335x-boneblack.dtb am335x-boneblack-wireless.dtb \
+    am335x-bonegreen.dtb am335x-bonegreen-wireless.dtb \
+"
+
+KERNEL_DEVICETREE += "${@oe.utils.conditional('ENABLE_TI_UIO_DEVICES', '1', 'am335x-icev2-pru-excl-uio.dtb', '', d)}"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am335x_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet gpu"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "am335x"
+TI_PDK_LIMIT_BOARDS = "evmAM335x icev2AM335x iceAMIC110 bbbAM335x skAM335x"

conf/machine/include/ti43x.inc

@@ -0,0 +1,57 @@
+require conf/machine/include/ti-soc.inc
+SOC_FAMILY_append = ":ti43x"
+
+DEFAULTTUNE ?= "armv7athf-neon"
+require conf/machine/include/tune-cortexa9.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+MACHINE_GUI_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r3"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+KERNEL_DEVICETREE = " \
+    am437x-gp-evm.dtb am437x-gp-evm-hdmi.dtb \
+    am437x-sk-evm.dtb am437x-idk-evm.dtb \
+    am43x-epos-evm.dtb am43x-epos-evm-hdmi.dtb \
+"
+
+KERNEL_DEVICETREE += "${@oe.utils.conditional('ENABLE_TI_UIO_DEVICES', '1', 'am437x-idk-pru-excl-uio.dtb', '', d)}"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am43xx_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet gpu"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "am437x"
+TI_PDK_LIMIT_BOARDS = "evmAM437x idkAM437x skAM437x"

conf/machine/j7-evm.conf

@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: J7 EVM
+#@DESCRIPTION: Machine configuration for the TI J7 EVM
+
+require conf/machine/include/k3.inc
+
+IMAGE_FSTYPES += "tar.xz wic.xz"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+KERNEL_DEVICETREE = " \
+    ti/k3-j721e-common-proc-board.dtb \
+    ti/k3-j721e-common-proc-board-infotainment.dtbo \
+    ti/k3-j721e-common-proc-board-infotainment-display-sharing.dtbo \
+    ti/k3-j721e-common-proc-board-jailhouse.dtbo \
+"
+
+UBOOT_MACHINE = "j721e_evm_a72_config"
+
+OPTEEMACHINE = "k3"
+OPTEEFLAVOR = "j7"
+OPTEEOUTPUTMACHINE = "k3"
+
+# Please note that booting J7 platform also requires
+# tiboot3.bin and sysfw.itb, which are provided by meta-arago
+# u-boot-k3-r5 and ti-sci-fw recipes
+IMAGE_BOOT_FILES = "tispl.bin u-boot.img"
+WKS_FILE = "sdimage-bootpart.wks"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_SOCS = "j721e"
+TI_PDK_LIMIT_BOARDS = "j721e_evm"
+TI_PDK_LIMIT_CORES = "mpu1_0 mcu1_0 mcu1_1 mcu2_0 mpu2_1 mpu3_0 mpu3_1 c66xdsp_1 c66xdsp_2 c7x_1"
+
+do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot u-boot:do_deploy"

conf/machine/k2e-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2E machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E EVM
+
+require conf/machine/include/k2e.inc
+
+KERNEL_DEVICETREE = "keystone-k2e-evm.dtb"
+
+UBOOT_MACHINE = "k2e_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2e"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2e-hs-evm.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2E HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E HS EVM
+
+require conf/machine/k2e-evm.conf
+
+UBOOT_MACHINE = "k2e_hs_evm_config"
+SPL_BINARY = ""
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2e"

conf/machine/k2g-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2G machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G EVM
+
+require conf/machine/include/k2g.inc
+
+MACHINE_FEATURES += "alsa"
+
+KERNEL_DEVICETREE = "keystone-k2g-evm.dtb keystone-k2g-evm-lcd.dtb keystone-k2g-ice.dtb \
+                     ${@oe.utils.conditional('ENABLE_TI_UIO_DEVICES', '1', 'keystone-k2g-ice-pru-excl-uio.dtb', '', d)}"
+
+UBOOT_MACHINE = "k2g_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2g"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1926"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/k2g-hs-evm.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2G HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G HS EVM
+
+require conf/machine/k2g-evm.conf
+
+UBOOT_MACHINE = "k2g_hs_evm_config"
+SPL_BINARY = ""
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2g"

conf/machine/k2hk-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK EVM
+
+require conf/machine/include/k2hk.inc
+
+KERNEL_DEVICETREE = "keystone-k2hk-evm.dtb"
+
+UBOOT_MACHINE = "k2hk_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2hk"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2hk-hs-evm.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK HS EVM
+
+require conf/machine/k2hk-evm.conf
+
+UBOOT_MACHINE = "k2hk_hs_evm_config"
+SPL_BINARY = ""
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2hk"

conf/machine/k2l-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2L machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L EVM
+
+require conf/machine/include/k2l.inc
+
+KERNEL_DEVICETREE = "keystone-k2l-evm.dtb"
+
+UBOOT_MACHINE = "k2l_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2l"
+
+IMAGE_FSTYPES += "ubifs ubi tar.xz"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1926"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/k2l-hs-evm.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2L HS EVM
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L HS EVM
+
+require conf/machine/k2l-evm.conf
+
+UBOOT_MACHINE = "k2l_hs_evm_config"
+SPL_BINARY = ""
+
+UBOOT_ENTRYPOINT = "0x82000000"
+UBOOT_LOADADDRESS = "0x82000000"
+UBOOT_RD_LOADADDRESS = "0x84000000"
+UBOOT_RD_ENTRYPOINT = "0x84000000"
+
+TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2l"

conf/machine/lego-ev3.conf

@@ -0,0 +1,22 @@
+#@TYPE: Machine
+#@NAME: LEGO Mindstorms EV3
+#@DESCRIPTION: Machine configuration for the LEGO Mindstorms EV3
+
+require conf/machine/include/davinci.inc
+require conf/machine/include/omapl138.inc
+
+UBOOT_MACHINE = "legoev3_config"
+UBOOT_SUFFIX = "bin"
+UBOOT_ENTRYPOINT = "0xC0008000"
+UBOOT_LOADADDRESS = "0xC0008000"
+SPL_BINARY = ""
+
+KERNEL_DEVICETREE = "da850-lego-ev3.dtb"
+KERNEL_IMAGETYPES = "uImage"
+KERNEL_DEVICETREE_BUNDLE = "1"
+SERIAL_CONSOLES = "115200;ttyS1"
+
+IMAGE_FSTYPES += " wic"
+WKS_FILE = "sdimage-bootpart.wks"
+WIC_CREATE_EXTRA_ARGS += " --no-fstab-update"
+IMAGE_BOOT_FILES = "${KERNEL_IMAGETYPES}"

conf/machine/omap3evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: OMAP3 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP3 EVM
+
+require conf/machine/include/omap3.inc
+
+MACHINE_GUI_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
+
+IMAGE_FSTYPES += "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+
+SERIAL_CONSOLES = "115200;ttyS0"
+USE_VT = "0"
+
+EXTRA_IMAGEDEPENDS += "x-load"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"

conf/machine/omap5-evm.conf

@@ -0,0 +1,34 @@
+#@TYPE: Machine
+#@NAME: OMAP5 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP5 uEVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+KERNEL_DEVICETREE = "omap5-uevm.dtb"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4300"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+UBOOT_MACHINE = "omap5_uevm_config"

conf/machine/omapl137-evm.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: OMAP-L137 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP-L137 EVM board
+
+require conf/machine/include/davinci.inc
+require conf/machine/include/omapl137.inc
+
+# HACK: The omapl137 family does not have linux kernel support.
+PREFERRED_PROVIDER_virtual/kernel = "linux-dummy"
+EXTRA_IMAGEDEPENDS = ""
+
+IMAGE_FSTYPES = "tar.xz"
+
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_BOARDS = "evmOMAPL137"

conf/machine/omapl138-lcdk.conf

@@ -2,10 +2,12 @@
 #@NAME: OMAP-L138 LCDK
 #@DESCRIPTION: Machine configuration for the TI OMAP-L138 LCDK board
 
+require conf/machine/include/davinci.inc
 require conf/machine/include/omapl138.inc
 
 UBOOT_MACHINE = "omapl138_lcdk_config"
 UBOOT_SUFFIX = "ais"
+SPL_BINARY = ""
 
 UBOOT_ENTRYPOINT = "0xc0008000"
 UBOOT_LOADADDRESS = "0xc0008000"
@@ -14,12 +16,7 @@ IMAGE_FSTYPES += "tar.xz"
 
 SERIAL_CONSOLES = "115200;ttyS2"
 
-KERNEL_DEVICETREE_PREFIX = " \
-    da850 \
-    ti/davinci/da850 \
-"
+KERNEL_DEVICETREE = "da850-evm.dtb da850-lcdk.dtb"
 
-KERNEL_DEVICETREE = " \
-    ti/davinci/da850-evm.dtb \
-    ti/davinci/da850-lcdk.dtb \
-"
+# Set the list of device targets for ti-pdk class recipes
+TI_PDK_LIMIT_BOARDS = "lcdkOMAPL138"

conf/machine/pandaboard.conf

@@ -0,0 +1,16 @@
+#@TYPE: Machine
+#@NAME: Pandaboard
+#@DESCRIPTION: Machine configuration for the OMAP4430 Panda
+
+require conf/machine/include/omap4.inc
+
+MACHINE_GUI_CLASS = "bigscreen"
+
+IMAGE_FSTYPES += "tar.gz"
+
+KERNEL_DEVICETREE = "omap4-panda.dtb omap4-panda-a4.dtb omap4-panda-es.dtb"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen usbgadget usbhost vfat gpu"

meta-beagle/COPYING.MIT

@@ -1,17 +0,0 @@
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.

meta-beagle/README

@@ -1,31 +0,0 @@
-OpenEmbedded/Yocto layer that extends meta-ti-bsp with BeagleBoard.org platforms.
-
-It is hosted on http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/ with the
-source repository at git://git.yoctoproject.org/meta-ti
-
-
-This layer depends on:
-
-URI: git://git.openembedded.org/openembedded-core
-layers: meta
-branch: master
-
-URI: git://git.yoctoproject.org/meta-arm
-layers: meta-arm
-branch: master
-
-URI: git://git.yoctoproject.org/meta-ti
-branch: master
-revision: HEAD
-layers: meta-ti-bsp
-
-
-Send pull requests, patches, comments or questions to:
-meta-ti@lists.yoctoproject.org
-
-Please note - meta-ti mailing list requires subscription for posting:
-https://lists.yoctoproject.org/g/meta-ti
-
-Maintainers:
-Denys Dmytriyenko <denys@konsulko.com>
-Ryan Eatmon <reatmon@ti.com>

meta-beagle/SECURITY

@@ -1,20 +0,0 @@
-How to Report a Potential Vulnerability?
-========================================
-
-If you would like to report a public issue (for example, one with a released
-CVE number), please report it to the mailing list:
-
-  https://lists.yoctoproject.org/g/meta-ti
-
-If you are dealing with a not-yet released or urgent issue, please send a
-message to one of the maintainers listed in the README.  Include as many
-details as possible:
-  - the layer or software module affected
-  - the recipe and its version
-  - any example code, if available
-
-Branches maintained with security fixes
----------------------------------------
-
-See https://wiki.yoctoproject.org/wiki/Releases for the list of current
-releases.  We only accept patches for the LTS releases and the master branch.

meta-beagle/conf/layer.conf

@@ -1,17 +0,0 @@
-# We have a conf and classes directory, append to BBPATH
-BBPATH .= ":${LAYERDIR}"
-
-# We have a recipes directory, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "meta-beagle"
-BBFILE_PATTERN_meta-beagle := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-beagle = "6"
-
-LAYERSERIES_COMPAT_meta-beagle = "whinlatter"
-
-LAYERDEPENDS_meta-beagle = " \
-    meta-ti-bsp \
-"
-
-HOSTTOOLS_NONFATAL += "lz4c"

meta-beagle/conf/machine/beagle-x15.conf

@@ -1,48 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBoard X15
-#@DESCRIPTION: Machine configuration for the BeagleBoard X15
-
-require conf/machine/include/am57xx.inc
-require conf/machine/include/beagle-bsp.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/omap/am57xx-beagle-x15 \
-    ti/omap/am57xx-idk-lcd \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/omap/am571x-idk.dtb \
-ti/omap/am571x-idk-touchscreen.dtbo \
-ti/omap/am5729-beagleboneai.dtb \
-ti/omap/am572x-idk.dtb \
-ti/omap/am572x-idk-touchscreen.dtbo \
-ti/omap/am574x-idk.dtb \
-ti/omap/am57xx-beagle-x15.dtb \
-ti/omap/am57xx-beagle-x15-revb1.dtb \
-ti/omap/am57xx-beagle-x15-revc.dtb \
-ti/omap/am57xx-evm.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2045.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2587.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/omap/am571x-idk.dtb \
-ti/omap/am571x-idk-touchscreen.dtbo \
-ti/omap/am5729-beagleboneai.dtb \
-ti/omap/am572x-idk.dtb \
-ti/omap/am572x-idk-touchscreen.dtbo \
-ti/omap/am574x-idk.dtb \
-ti/omap/am57xx-beagle-x15.dtb \
-ti/omap/am57xx-beagle-x15-revb1.dtb \
-ti/omap/am57xx-beagle-x15-revc.dtb \
-ti/omap/am57xx-evm.dtbo \
-ti/omap/am57xx-evm-ov10635.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2045.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2587.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-UBOOT_MACHINE = "am57xx_evm_config"

meta-beagle/conf/machine/beaglebone-ai64-k3r5.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBone AI-64 (R5F)
-#@DESCRIPTION: Machine configuration for the BeagleBone AI-64 (R5F core)
-
-require conf/machine/include/k3r5.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE = "j721e_beagleboneai64_r5_defconfig"

meta-beagle/conf/machine/beaglebone-ai64.conf

@@ -1,95 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBone AI-64 (A72)
-#@DESCRIPTION: Machine configuration for the BeagleBone AI-64 board (A72 core)
-
-require conf/machine/include/j721e.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE = "j721e_beagleboneai64_a72_defconfig"
-
-SPL_BINARY = "tispl.bin_unsigned"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-j721e \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/k3-j721e-beagleboneai64-BBORG_MOTOR.dtbo \
-ti/k3-j721e-beagleboneai64-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j721e-beagleboneai64.dtb \
-ti/k3-j721e-beagleboneai64-microtips-mf070zima-lcd3.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm4-p9_25.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi2-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi3-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0-cs1.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs1-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi7-cs0.dtbo \
-ti/k3-j721e-common-proc-board.dtb \
-ti/k3-j721e-common-proc-board-infotainment.dtbo \
-ti/k3-j721e-evm-csi2-ov5640.dtbo \
-ti/k3-j721e-evm-ethfw.dtbo \
-ti/k3-j721e-evm-fusion.dtbo \
-ti/k3-j721e-evm-gesi-exp-board.dtbo \
-ti/k3-j721e-evm-ina2xx.dtbo \
-ti/k3-j721e-evm-pcie0-ep.dtbo \
-ti/k3-j721e-evm-pcie1-ep.dtbo \
-ti/k3-j721e-evm-quad-port-eth-exp.dtbo \
-ti/k3-j721e-sk-csi2-dual-imx219.dtbo \
-ti/k3-j721e-sk-csi2-ov5640.dtbo \
-ti/k3-j721e-sk.dtb \
-ti/k3-j721e-sk-fpdlink-fusion.dtbo \
-ti/k3-j721e-sk-rpi-hdr-ehrpwm.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/k3-j721e-beagleboneai64-BBORG_MOTOR.dtbo \
-ti/k3-j721e-beagleboneai64-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j721e-beagleboneai64.dtb \
-ti/k3-j721e-beagleboneai64-microtips-mf070zima-lcd3.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm4-p9_25.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi2-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi3-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0-cs1.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs1-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi7-cs0.dtbo \
-ti/k3-j721e-common-proc-board.dtb \
-ti/k3-j721e-common-proc-board-infotainment.dtbo \
-ti/k3-j721e-evm-csi2-ov5640.dtbo \
-ti/k3-j721e-evm-ethfw.dtbo \
-ti/k3-j721e-evm-fusion.dtbo \
-ti/k3-j721e-evm-gesi-exp-board.dtbo \
-ti/k3-j721e-evm-pcie0-ep.dtbo \
-ti/k3-j721e-evm-pcie1-ep.dtbo \
-ti/k3-j721e-evm-pcie-ntb.dtbo \
-ti/k3-j721e-evm-quad-port-eth-exp.dtbo \
-ti/k3-j721e-evm-ub954.dtbo \
-ti/k3-j721e-sk-csi2-dual-imx219.dtbo \
-ti/k3-j721e-sk-csi2-ov5640.dtbo \
-ti/k3-j721e-sk.dtb \
-ti/k3-j721e-sk-fpdlink-fusion.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"
-
-# TI has moved a driver out of its kernel tree and into an out of tree module.
-# We need to not include that for older kernels since the module is still in
-# the kernel.
-TI_VXE_VXD_DRIVER:bsp-bb_org-6_6 = ""

meta-beagle/conf/machine/beaglebone.conf

@@ -1,62 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBone machine
-#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board
-
-require conf/machine/include/ti33x.inc
-require conf/machine/include/beagle-bsp.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/omap/am335x-bone \
-    ti/omap/am335x-pocketbeagle \
-    ti/omap/am335x-sancloud-bbe \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/omap/am335x-boneblack.dtb \
-ti/omap/am335x-boneblack-revd.dtb \
-ti/omap/am335x-boneblack-uboot.dtb \
-ti/omap/am335x-boneblack-uboot-univ.dtb \
-ti/omap/am335x-boneblack-wireless.dtb \
-ti/omap/am335x-boneblue.dtb \
-ti/omap/am335x-bone.dtb \
-ti/omap/am335x-bonegreen.dtb \
-ti/omap/am335x-bonegreen-gateway.dtb \
-ti/omap/am335x-bonegreen-wireless.dtb \
-ti/omap/am335x-bonegreen-wireless-uboot-univ.dtb \
-ti/omap/am335x-evm.dtb \
-ti/omap/am335x-evmsk.dtb \
-ti/omap/am335x-icev2.dtb \
-ti/omap/am335x-osd3358-sm-red.dtb \
-ti/omap/am335x-pocketbeagle.dtb \
-ti/omap/am335x-sancloud-bbe.dtb \
-ti/omap/am335x-sancloud-bbe-extended-wifi.dtb \
-ti/omap/am335x-sancloud-bbe-lite.dtb \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/omap/am335x-boneblack.dtb \
-ti/omap/am335x-boneblack-revd.dtb \
-ti/omap/am335x-boneblack-uboot.dtb \
-ti/omap/am335x-boneblack-uboot-univ.dtb \
-ti/omap/am335x-boneblack-wireless.dtb \
-ti/omap/am335x-boneblue.dtb \
-ti/omap/am335x-bone.dtb \
-ti/omap/am335x-bonegreen.dtb \
-ti/omap/am335x-bonegreen-eco.dtb \
-ti/omap/am335x-bonegreen-gateway.dtb \
-ti/omap/am335x-bonegreen-wireless.dtb \
-ti/omap/am335x-bonegreen-wireless-uboot-univ.dtb \
-ti/omap/am335x-evm.dtb \
-ti/omap/am335x-evmsk.dtb \
-ti/omap/am335x-icev2.dtb \
-ti/omap/am335x-osd3358-sm-red.dtb \
-ti/omap/am335x-pocketbeagle.dtb \
-ti/omap/am335x-sancloud-bbe.dtb \
-ti/omap/am335x-sancloud-bbe-extended-wifi.dtb \
-ti/omap/am335x-sancloud-bbe-lite.dtb \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"
-MACHINE_FEATURES += "screen"
-
-SERIAL_CONSOLES = "115200;ttyS0"

meta-beagle/conf/machine/beagleplay-k3r5.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeaglePlay (R5F)
-#@DESCRIPTION: Machine configuration for the BeaglePlay (R5F core)
-
-require conf/machine/beagleplay-ti-k3r5.conf
-
-require conf/machine/include/beagle-bsp.inc

meta-beagle/conf/machine/beagleplay.conf

@@ -1,62 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeaglePlay (A53)
-#@DESCRIPTION: Machine configuration for the BeaglePlay board (A53 core)
-
-require conf/machine/beagleplay-ti.conf
-
-require conf/machine/include/beagle-bsp.inc
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-ti/k3-am625-beagleplay.dtb \
-ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-minimal.dtb \
-ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-ecap-capture.dtbo \
-ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk-m2-cc3301.dtbo \
-ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-am62x-sk-csi2-imx219.dtbo \
-ti/k3-am62x-sk-csi2-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
-ti/k3-am62x-sk-dmtimer-pwm.dtbo \
-ti/k3-am62x-sk-eqep.dtbo \
-ti/k3-am62x-sk-fastboot-disable-hdmi.dtbo \
-ti/k3-am62x-sk-hdmi-audio.dtbo \
-ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
-ti/k3-am62x-sk-mcan.dtbo \
-ti/k3-am62x-sk-microtips-mf103hie-lcd2.dtbo \
-ti/k3-am62x-sk-pwm.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/k3-am625-beagleplay-bcfserial-no-firmware.dtbo \
-ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-ti/k3-am625-beagleplay.dtb \
-ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk-m2-cc3351.dtbo \
-ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-am62x-sk-csi2-imx219.dtbo \
-ti/k3-am62x-sk-csi2-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
-ti/k3-am62x-sk-dmtimer-pwm.dtbo \
-ti/k3-am62x-sk-ecap-capture.dtbo \
-ti/k3-am62x-sk-eqep.dtbo \
-ti/k3-am62x-sk-fastboot-disable-hdmi.dtbo \
-ti/k3-am62x-sk-hdmi-audio.dtbo \
-ti/k3-am62x-sk-lpm-io-ddr-wkup-sources.dtbo \
-ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
-ti/k3-am62x-sk-mcan.dtbo \
-ti/k3-am62x-sk-microtips-mf103hie-lcd2.dtbo \
-ti/k3-am62x-sk-pwm.dtbo \
-"

meta-beagle/conf/machine/beagley-ai-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleY AI (R5F)
-#@DESCRIPTION: Machine configuration for the BeagleY AI (R5F core)
-
-require conf/machine/include/k3r5.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE = "am67a_beagley_ai_r5_defconfig"
-UBOOT_MACHINE:bsp-bb_org-6_6 = "j722s_evm_r5_defconfig"
-UBOOT_MACHINE:bsp-ti-6_6 = "j722s_evm_r5_defconfig"
-UBOOT_MACHINE:bsp-ti-6_12 = "j722s_evm_r5_defconfig"

meta-beagle/conf/machine/beagley-ai.conf

@@ -1,108 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleY AI (A53)
-#@DESCRIPTION: Machine configuration for the BeagleY AI board (A53 core)
-
-require conf/machine/include/j722s.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE = "am67a_beagley_ai_a53_defconfig"
-UBOOT_MACHINE:bsp-bb_org-6_6 = "j722s_evm_a53_config"
-UBOOT_MACHINE:bsp-ti-6_6 = "j722s_evm_a53_config"
-UBOOT_MACHINE:bsp-ti-6_12 = "j722s_evm_a53_config"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am67a \
-    ti/k3-j722s \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/k3-am67a-beagley-ai.dtb \
-ti/k3-am67a-beagley-ai-i2c1-400000.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ads1115.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-rtc-rv3028.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ssd1306.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-eth.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-microsd.dtbo \
-ti/k3-am67a-beagley-ai-pps-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio16.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio17.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-spi0-1cs.dtbo \
-ti/k3-am67a-beagley-ai-spi0-2cs.dtbo \
-ti/k3-am67a-beagley-ai-spidev0.dtbo \
-ti/k3-am67a-beagley-ai-uart-ttyama0.dtbo \
-ti/k3-j722s-evm-csi2-ov5640.dtbo \
-ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo \
-ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo \
-ti/k3-j722s-evm-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j722s-evm.dtb \
-ti/k3-j722s-evm-fpdlink-fusion.dtbo \
-ti/k3-j722s-evm-microtips-mf101hie-panel.dtbo \
-ti/k3-j722s-evm-pwm.dtbo \
-ti/k3-j722s-evm-v3link-fusion.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/k3-am67a-beagley-ai.dtb \
-ti/k3-am67a-beagley-ai-i2c1-400000.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ads1115.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-rtc-rv3028.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ssd1306.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-eth.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-microsd.dtbo \
-ti/k3-am67a-beagley-ai-pps-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio16.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio17.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-spi0-1cs.dtbo \
-ti/k3-am67a-beagley-ai-spi0-2cs.dtbo \
-ti/k3-am67a-beagley-ai-spidev0.dtbo \
-ti/k3-am67a-beagley-ai-uart-ttyama0.dtbo \
-ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo \
-ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo \
-ti/k3-j722s-evm-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j722s-evm.dtb \
-ti/k3-j722s-evm-fpdlink-fusion.dtbo \
-ti/k3-j722s-evm-fpdlink-iv-fusion.dtbo \
-ti/k3-j722s-evm-microtips-mf101hie-panel.dtbo \
-ti/k3-j722s-evm-pwm.dtbo \
-ti/k3-j722s-evm-v3link-fusion.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"

meta-beagle/conf/machine/include/beagle-bsp.inc

@@ -1,47 +0,0 @@
-# Use meta-ti-bsp "multi-BSP" facility to create a custom "bb_org" BSP profile
-# with default preferences for Beagle platforms
-
-# Default is bb_org-6_12, but can override with any of the existing options
-TI_PREFERRED_BSP ?= "bb_org-6_12"
-
-# ===========
-# bb_org-6_12
-# BeagleBoard.org kernel 6.12, u-boot 2025.04
-# based on TI staging trees with extra Beagle-specific features
-# but may not be up-to-date with TI version
-# ===========
-BSP_KERNEL_PROVIDER:bsp-bb_org-6_12 = "linux-bb.org"
-BSP_KERNEL_VERSION:bsp-bb_org-6_12 = "6.12.%"
-BSP_BOOTLOADER_PROVIDER:bsp-bb_org-6_12 = "u-boot-bb.org"
-BSP_BOOTLOADER_VERSION:bsp-bb_org-6_12 = "2025.%"
-KERNEL_DEVICETREE_PREFIX:bsp-bb_org-6_12 = ""
-
-BSP_SGX_DRIVER_PROVIDER:bsp-bb_org-6_12 = "ti-sgx-ddk-km"
-BSP_SGX_DRIVER_VERSION:bsp-bb_org-6_12 = "1.17%"
-BSP_ROGUE_DRIVER_PROVIDER:bsp-bb_org-6_12 = "ti-img-rogue-driver"
-BSP_ROGUE_DRIVER_VERSION:bsp-bb_org-6_12 = "25%"
-BSP_MESA_PVR_VERSION:bsp-bb_org-6_12 = "24%"
-
-# GC320 support requires out-of-tree drivers not yet available in bb.org 6.12
-MACHINE_FEATURES:remove:bsp-bb_org-6_12 = "gc320"
-
-# ==========
-# bb_org-6_6
-# BeagleBoard.org kernel 6.6, u-boot 2024.10
-# based on TI staging trees with extra Beagle-specific features
-# but may not be up-to-date with TI version
-# ==========
-BSP_KERNEL_PROVIDER:bsp-bb_org-6_6 = "linux-bb.org"
-BSP_KERNEL_VERSION:bsp-bb_org-6_6 = "6.6.%"
-BSP_BOOTLOADER_PROVIDER:bsp-bb_org-6_6 = "u-boot-bb.org"
-BSP_BOOTLOADER_VERSION:bsp-bb_org-6_6 = "2024.%"
-KERNEL_DEVICETREE_PREFIX:bsp-bb_org-6_6 = ""
-
-BSP_SGX_DRIVER_PROVIDER:bsp-bb_org-6_6 = "ti-sgx-ddk-km"
-BSP_SGX_DRIVER_VERSION:bsp-bb_org-6_6 = "1.17%"
-BSP_ROGUE_DRIVER_PROVIDER:bsp-bb_org-6_6 = "ti-img-rogue-driver"
-BSP_ROGUE_DRIVER_VERSION:bsp-bb_org-6_6 = "25%"
-BSP_MESA_PVR_VERSION:bsp-bb_org-6_6 = "24%"
-
-# GC320 support requires out-of-tree drivers not yet available in bb.org 6.6
-MACHINE_FEATURES:remove:bsp-bb_org-6_6 = "gc320"

meta-beagle/conf/machine/pocketbeagle2-k3r5.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: PocketBeagle2 (R5F)
-#@DESCRIPTION: Machine configuration for the PocketBeagle2 (R5F core)
-
-require conf/machine/include/k3r5.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE = "am62_pocketbeagle2_r5_defconfig"

meta-beagle/conf/machine/pocketbeagle2.conf

@@ -1,58 +0,0 @@
-#@TYPE: Machine
-#@NAME: PocketBeagle2 (A53)
-#@DESCRIPTION: Machine configuration for the PocketBeagle2 board (A53 core)
-
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-require conf/machine/include/beagle-bsp.inc
-
-SOC_FAMILY:append = ":am62xx"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-TFA_BOARD = "lite"
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-OPTEEMACHINE = "k3-am62x"
-
-UBOOT_MACHINE = "am62_pocketbeagle2_a53_defconfig"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am6232 \
-    ti/k3-am62-pocket \
-"
-
-KERNEL_DEVICETREE = " \
-ti/k3-am6232-pocketbeagle2.dtb \
-ti/k3-am6232-pocketbeagle2-techlab-cape.dtbo \
-ti/k3-am625-beagleplay-bcfserial-no-firmware.dtbo \
-ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-ti/k3-am625-beagleplay.dtb \
-ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk-m2-cc3351.dtbo \
-ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-am62-pocketbeagle2-ardupilot-cape.dtbo \
-ti/k3-am62-pocketbeagle2.dtb \
-ti/k3-am62-pocketbeagle2-leds-off.dtbo \
-ti/k3-am62-pocketbeagle2-techlab-cape.dtbo \
-ti/k3-am62x-sk-csi2-imx219.dtbo \
-ti/k3-am62x-sk-csi2-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
-ti/k3-am62x-sk-dmtimer-pwm.dtbo \
-ti/k3-am62x-sk-ecap-capture.dtbo \
-ti/k3-am62x-sk-eqep.dtbo \
-ti/k3-am62x-sk-fastboot-disable-hdmi.dtbo \
-ti/k3-am62x-sk-hdmi-audio.dtbo \
-ti/k3-am62x-sk-lpm-io-ddr-wkup-sources.dtbo \
-ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
-ti/k3-am62x-sk-mcan.dtbo \
-ti/k3-am62x-sk-microtips-mf103hie-lcd2.dtbo \
-ti/k3-am62x-sk-pwm.dtbo \
-"

meta-beagle/recipes-bsp/u-boot/u-boot-bb.org-2025.10+git/bootcmd-ti-mmc.cfg

@@ -1 +0,0 @@
-CONFIG_BOOTCOMMAND="run bootcmd_ti_mmc"

meta-beagle/recipes-bsp/u-boot/u-boot-bb.org_2024.10.bb

@@ -1,14 +0,0 @@
-require recipes-bsp/u-boot/u-boot-ti.inc
-
-SUMMARY = "BeagleBoard.org U-Boot"
-
-COMPATIBLE_MACHINE = "beagle.*"
-
-PV = "2024.10"
-
-SRC_URI += "file://0001-scripts-dtc-pylibfdt-libfdt.i_shipped-Use-SWIG_Appen.patch"
-
-UBOOT_GIT_URI = "git://github.com/beagleboard/u-boot.git"
-UBOOT_GIT_PROTOCOL = "https"
-BRANCH = "v2024.10-Beagle"
-SRCREV = "bf0e9d0b7274d2b561bd24c858affec2038250f9"

meta-beagle/recipes-bsp/u-boot/u-boot-bb.org_2025.10.bb

@@ -1,19 +0,0 @@
-require recipes-bsp/u-boot/u-boot-ti.inc
-
-SUMMARY = "BeagleBoard.org U-Boot"
-
-COMPATIBLE_MACHINE = "pocketbeagle2|beagle.*"
-
-PV = "2025.10"
-
-UBOOT_GIT_URI = "git://github.com/beagleboard/u-boot.git"
-UBOOT_GIT_PROTOCOL = "https"
-BRANCH = "v2025.10-Beagle"
-SRCREV = "6825d60bea17774358f4199c4c7062801cfb931e"
-
-BRANCH:pocketbeagle2 = "v2025.10-am62-pocketbeagle2"
-BRANCH:pocketbeagle2-k3r5 = "v2025.10-am62-pocketbeagle2"
-SRCREV:pocketbeagle2 = "4e0b6294a1185029d34eff6ed91f3ad1734b643f"
-SRCREV:pocketbeagle2-k3r5 = "4e0b6294a1185029d34eff6ed91f3ad1734b643f"
-
-SRC_URI:append:pocketbeagle2 = " file://bootcmd-ti-mmc.cfg"

meta-beagle/recipes-kernel/linux/linux-bb.org-6.12/defconfig

@@ -1 +0,0 @@
-use-kernel-config=bb.org_defconfig

meta-beagle/recipes-kernel/linux/linux-bb.org-6.6/defconfig

@@ -1 +0,0 @@
-use-kernel-config=bb.org_defconfig

meta-beagle/recipes-kernel/linux/linux-bb.org-6.6/no-fortify.cfg

@@ -1 +0,0 @@
-CONFIG_FORTIFY_SOURCE=n

meta-beagle/recipes-kernel/linux/linux-bb.org_6.12.bb

@@ -1,67 +0,0 @@
-# Look in the generic major.minor directory for files
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-6.12:"
-
-SECTION = "kernel"
-SUMMARY = "BeagleBoard.org Linux kernel"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-COMPATIBLE_MACHINE = "pocketbeagle2|beagle.*"
-
-inherit kernel
-
-require recipes-kernel/linux/setup-defconfig.inc
-require recipes-kernel/linux/ti-kernel.inc
-
-DEPENDS += "gmp-native libmpc-native"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-# Extra DT overlays/capes
-KERNEL_DEVICETREE:append:armv7a = " \
-    ti/omap/BB-ADC-00A0.dtbo \
-    ti/omap/BB-BBBW-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGG-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGW-WL1835-00A0.dtbo \
-    ti/omap/BB-BONE-4D5R-01-00A1.dtbo \
-    ti/omap/BB-BONE-eMMC1-01-00A0.dtbo \
-    ti/omap/BB-BONE-LCD4-01-00A1.dtbo \
-    ti/omap/BB-BONE-NH7C-01-A0.dtbo \
-    ti/omap/BB-CAPE-DISP-CT4-00A0.dtbo \
-    ti/omap/BB-HDMI-TDA998x-00A0.dtbo \
-    ti/omap/BB-I2C1-MCP7940X-00A0.dtbo \
-    ti/omap/BB-I2C1-RTC-DS3231.dtbo \
-    ti/omap/BB-I2C1-RTC-PCF8563.dtbo \
-    ti/omap/BB-I2C2-BME680.dtbo \
-    ti/omap/BB-I2C2-MPU6050.dtbo \
-    ti/omap/BB-LCD-ADAFRUIT-24-SPI1-00A0.dtbo \
-    ti/omap/BB-NHDMI-TDA998x-00A0.dtbo \
-    ti/omap/BBORG_COMMS-00A2.dtbo \
-    ti/omap/BBORG_FAN-A000.dtbo \
-    ti/omap/BBORG_RELAY-00A2.dtbo \
-    ti/omap/BB-SPIDEV0-00A0.dtbo \
-    ti/omap/BB-SPIDEV1-00A0.dtbo \
-    ti/omap/BB-UART1-00A0.dtbo \
-    ti/omap/BB-UART2-00A0.dtbo \
-    ti/omap/BB-UART4-00A0.dtbo \
-    ti/omap/BB-W1-P9.12-00A0.dtbo \
-    ti/omap/BONE-ADC.dtbo \
-    ti/omap/M-BB-BBG-00A0.dtbo \
-    ti/omap/M-BB-BBGG-00A0.dtbo \
-    ti/omap/PB-MIKROBUS-0.dtbo \
-    ti/omap/PB-MIKROBUS-1.dtbo \
-"
-
-S = "${UNPACKDIR}/${BB_GIT_DEFAULT_DESTSUFFIX}"
-
-# 6.12.34 version for 32-bit
-SRCREV:armv7a = "9e419b26243bd7efcd103ae0f6456f828592b34b"
-PV:armv7a = "6.12.34+git"
-BRANCH:armv7a = "v6.12.34-ti-arm32-r12"
-
-# 6.12.43 version for 64-bit
-SRCREV:aarch64 = "84c4b4613a852db269620a3fdfed65de90569fa1"
-PV:aarch64 = "6.12.43+git"
-BRANCH:aarch64 = "v6.12.43-ti-arm64-r54"
-
-KERNEL_GIT_URI = "git://github.com/beagleboard/linux.git"

meta-beagle/recipes-kernel/linux/linux-bb.org_6.6.bb

@@ -1,71 +0,0 @@
-# Look in the generic major.minor directory for files
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-6.6:"
-
-SECTION = "kernel"
-SUMMARY = "BeagleBoard.org Linux kernel"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-COMPATIBLE_MACHINE = "beagle.*"
-
-inherit kernel
-
-require recipes-kernel/linux/setup-defconfig.inc
-require recipes-kernel/linux/ti-kernel.inc
-
-DEPENDS += "gmp-native libmpc-native"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-# Extra DT overlays/capes
-KERNEL_DEVICETREE:append:armv7a = " \
-    ti/omap/AM335X-PRU-UIO-00A0.dtbo \
-    ti/omap/BB-ADC-00A0.dtbo \
-    ti/omap/BB-BBBW-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGG-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGW-WL1835-00A0.dtbo \
-    ti/omap/BB-BONE-4D5R-01-00A1.dtbo \
-    ti/omap/BB-BONE-eMMC1-01-00A0.dtbo \
-    ti/omap/BB-BONE-LCD4-01-00A1.dtbo \
-    ti/omap/BB-BONE-NH7C-01-A0.dtbo \
-    ti/omap/BB-CAPE-DISP-CT4-00A0.dtbo \
-    ti/omap/BB-HDMI-TDA998x-00A0.dtbo \
-    ti/omap/BB-I2C1-MCP7940X-00A0.dtbo \
-    ti/omap/BB-I2C1-RTC-DS3231.dtbo \
-    ti/omap/BB-I2C1-RTC-PCF8563.dtbo \
-    ti/omap/BB-I2C2-BME680.dtbo \
-    ti/omap/BB-I2C2-MPU6050.dtbo \
-    ti/omap/BB-LCD-ADAFRUIT-24-SPI1-00A0.dtbo \
-    ti/omap/BB-NHDMI-TDA998x-00A0.dtbo \
-    ti/omap/BBORG_COMMS-00A2.dtbo \
-    ti/omap/BBORG_FAN-A000.dtbo \
-    ti/omap/BBORG_RELAY-00A2.dtbo \
-    ti/omap/BB-SPIDEV0-00A0.dtbo \
-    ti/omap/BB-SPIDEV1-00A0.dtbo \
-    ti/omap/BB-UART1-00A0.dtbo \
-    ti/omap/BB-UART2-00A0.dtbo \
-    ti/omap/BB-UART4-00A0.dtbo \
-    ti/omap/BB-W1-P9.12-00A0.dtbo \
-    ti/omap/BONE-ADC.dtbo \
-    ti/omap/M-BB-BBG-00A0.dtbo \
-    ti/omap/M-BB-BBGG-00A0.dtbo \
-    ti/omap/PB-MIKROBUS-0.dtbo \
-    ti/omap/PB-MIKROBUS-1.dtbo \
-"
-
-S = "${UNPACKDIR}/${BB_GIT_DEFAULT_DESTSUFFIX}"
-
-# 6.6.58 version for 32-bit
-SRCREV:armv7a = "3d519995234675748a38b1e3bc087baa03e3ac25"
-PV:armv7a = "6.6.58+git"
-BRANCH:armv7a = "v6.6.58-ti-arm32-r12"
-
-# 6.6.58 version for 64-bit
-SRCREV:aarch64 = "1de9481cd5749807550148086aea959295bd11db"
-PV:aarch64 = "6.6.58+git"
-BRANCH:aarch64 = "v6.6.58-ti-arm64-r30"
-
-KERNEL_GIT_URI = "git://github.com/beagleboard/linux.git"
-
-SRC_URI += "file://no-fortify.cfg"
-KERNEL_CONFIG_FRAGMENTS += "${UNPACKDIR}/no-fortify.cfg"

meta-ti-bsp/COPYING.MIT

@@ -1,17 +0,0 @@
-Permission is hereby granted, free of charge, to any person obtaining a copy 
-of this software and associated documentation files (the "Software"), to deal 
-in the Software without restriction, including without limitation the rights 
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
-copies of the Software, and to permit persons to whom the Software is 
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in 
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 
-THE SOFTWARE.

meta-ti-bsp/README

@@ -1,33 +0,0 @@
-The official OpenEmbedded/Yocto BSP layer for Texas Instruments platforms.
-
-It is hosted on http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/ with the
-source repository at git://git.yoctoproject.org/meta-ti
-
-
-This layer depends on:
-
-URI: git://git.openembedded.org/openembedded-core
-layers: meta
-branch: master
-
-URI: git://git.yoctoproject.org/meta-arm
-layers: meta-arm
-branch: master
-
-
-The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
-distributions and layer stacks, such as:
-distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
-
-Please follow the recommended setup procedures of your OE distribution.
-
-
-Send pull requests, patches, comments or questions to:
-meta-ti@lists.yoctoproject.org
-
-Please note - meta-ti mailing list requires subscription for posting:
-https://lists.yoctoproject.org/g/meta-ti
-
-Maintainers:
-Ryan Eatmon <reatmon@ti.com>
-Denys Dmytriyenko <denys@konsulko.com>

meta-ti-bsp/SECURITY

@@ -1,20 +0,0 @@
-How to Report a Potential Vulnerability?
-========================================
-
-If you would like to report a public issue (for example, one with a released
-CVE number), please report it to the mailing list:
-
-  https://lists.yoctoproject.org/g/meta-ti
-
-If you are dealing with a not-yet released or urgent issue, please send a
-message to one of the maintainers listed in the README.  Include as many
-details as possible:
-  - the layer or software module affected
-  - the recipe and its version
-  - any example code, if available
-
-Branches maintained with security fixes
----------------------------------------
-
-See https://wiki.yoctoproject.org/wiki/Releases for the list of current
-releases.  We only accept patches for the LTS releases and the master branch.

meta-ti-bsp/classes/kernel-fitimage-legacyhs.bbclass

@@ -1,767 +0,0 @@
-inherit ti-secdev kernel-uboot-legacyhs uboot-sign-legacyhs
-
-FITIMAGE_HASH_ALGO ?= "sha1"
-FITIMAGE_PACK_TEE ?= "0"
-FITIMAGE_DTB_BY_NAME ?= "0"
-FITIMAGE_TEE_BY_NAME ?= "0"
-FITIMAGE_CONF_BY_NAME ?= "0"
-
-python __anonymous () {
-    kerneltypes = d.getVar('KERNEL_IMAGETYPES') or ""
-    if 'fitImage' in kerneltypes.split():
-        depends = d.getVar("DEPENDS")
-        depends = "%s u-boot-mkimage-native dtc-native" % depends
-        d.setVar("DEPENDS", depends)
-
-        uarch = d.getVar("UBOOT_ARCH")
-        if uarch == "arm64":
-            replacementtype = "Image"
-        elif uarch == "mips":
-            replacementtype = "vmlinuz.bin"
-        elif uarch == "x86":
-            replacementtype = "bzImage"
-        elif uarch == "microblaze":
-            replacementtype = "linux.bin"
-        else:
-            replacementtype = "zImage"
-
-        # Override KERNEL_IMAGETYPE_FOR_MAKE variable, which is internal
-        # to kernel.bbclass . We have to override it, since we pack zImage
-        # (at least for now) into the fitImage .
-        typeformake = d.getVar("KERNEL_IMAGETYPE_FOR_MAKE") or ""
-        if 'fitImage' in typeformake.split():
-            d.setVar('KERNEL_IMAGETYPE_FOR_MAKE', typeformake.replace('fitImage', replacementtype))
-
-        image = d.getVar('INITRAMFS_IMAGE')
-        if image:
-            d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete')
-
-        # Verified boot will sign the fitImage and append the public key to
-        # U-boot dtb. We ensure the U-Boot dtb is deployed before assembling
-        # the fitImage:
-        if d.getVar('UBOOT_SIGN_ENABLE'):
-            uboot_pn = d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'
-            d.appendVarFlag('do_assemble_fitimage', 'depends', ' %s:do_deploy' % uboot_pn)
-
-        if d.getVar('FITIMAGE_PACK_TEE') == "1":
-            d.appendVarFlag('do_assemble_fitimage', 'depends', ' optee-os:do_deploy')
-}
-
-# Options for the device tree compiler passed to mkimage '-D' feature:
-UBOOT_MKIMAGE_DTCOPTS ??= ""
-
-fitimage_ti_secure() {
-	if test -f "${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh"; then
-		export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG}
-		${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh $1 $2
-	else
-		cp $1 $2
-	fi
-}
-
-#
-# Emit the fitImage ITS header
-#
-# $1 ... .its filename
-fitimage_emit_fit_header() {
-	cat << EOF >> ${1}
-/dts-v1/;
-
-/ {
-        description = "U-Boot fitImage for ${DISTRO_NAME}/${PV}/${MACHINE}";
-        #address-cells = <1>;
-EOF
-}
-
-#
-# Emit the fitImage section bits
-#
-# $1 ... .its filename
-# $2 ... Section bit type: imagestart - image section start
-#                          confstart  - configuration section start
-#                          sectend    - section end
-#                          fitend     - fitimage end
-#
-fitimage_emit_section_maint() {
-	case $2 in
-	imagestart)
-		cat << EOF >> ${1}
-
-        images {
-EOF
-	;;
-	confstart)
-		cat << EOF >> ${1}
-
-        configurations {
-EOF
-	;;
-	sectend)
-		cat << EOF >> ${1}
-        };
-EOF
-	;;
-	fitend)
-		cat << EOF >> ${1}
-};
-EOF
-	;;
-	esac
-}
-
-#
-# Emit the fitImage ITS kernel section
-#
-# $1 ... .its filename
-# $2 ... Image counter
-# $3 ... Path to kernel image
-# $4 ... Compression type
-fitimage_emit_section_kernel() {
-
-	kernel_csum=${FITIMAGE_HASH_ALGO}
-
-	ENTRYPOINT="${UBOOT_ENTRYPOINT}"
-	if test -n "${UBOOT_ENTRYSYMBOL}"; then
-		ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \
-			awk '$4=="${UBOOT_ENTRYSYMBOL}" {print $2}'`
-	fi
-
-	cat << EOF >> ${1}
-                kernel-${2} {
-                        description = "Linux kernel";
-                        data = /incbin/("${3}");
-                        type = "kernel";
-                        arch = "${UBOOT_ARCH}";
-                        os = "linux";
-                        compression = "${4}";
-                        load = <${UBOOT_LOADADDRESS}>;
-                        entry = <${ENTRYPOINT}>;
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${kernel_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS DTB section
-#
-# $1 ... .its filename
-# $2 ... Image counter/name
-# $3 ... Path to DTB image
-# $4 ... Load address
-fitimage_emit_section_dtb() {
-
-	dtb_csum=${FITIMAGE_HASH_ALGO}
-	dtb_loadline="${4}"
-
-	cat << EOF >> ${1}
-                ${2} {
-                        description = "Flattened Device Tree blob";
-                        data = /incbin/("${3}");
-                        type = "flat_dt";
-                        arch = "${UBOOT_ARCH}";
-                        compression = "none";
-                        ${dtb_loadline}
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${dtb_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS TEE section
-#
-# $1 ... .its filename
-# $2 ... Image counter/name
-# $3 ... Path to TEE image
-fitimage_emit_section_tee() {
-
-	tee_csum=${FITIMAGE_HASH_ALGO}
-
-	cat << EOF >> ${1}
-                ${2} {
-                        description = "OPTEE OS Image";
-                        data = /incbin/("${3}");
-                        type = "tee";
-                        arch = "${UBOOT_ARCH}";
-                        compression = "none";
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${tee_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS setup section
-#
-# $1 ... .its filename
-# $2 ... Image counter
-# $3 ... Path to setup image
-fitimage_emit_section_setup() {
-
-	setup_csum=${FITIMAGE_HASH_ALGO}
-
-	cat << EOF >> ${1}
-                setup-${2} {
-                        description = "Linux setup.bin";
-                        data = /incbin/("${3}");
-                        type = "x86_setup";
-                        arch = "${UBOOT_ARCH}";
-                        os = "linux";
-                        compression = "none";
-                        load = <0x00090000>;
-                        entry = <0x00090000>;
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${setup_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS ramdisk section
-#
-# $1 ... .its filename
-# $2 ... Image counter
-# $3 ... Path to ramdisk image
-fitimage_emit_section_ramdisk() {
-
-	ramdisk_csum=${FITIMAGE_HASH_ALGO}
-	ramdisk_ctype="none"
-
-	case $3 in
-		*.gz|*.gz.sec)
-			ramdisk_ctype="gzip"
-			;;
-		*.bz2|*.bz2.sec)
-			ramdisk_ctype="bzip2"
-			;;
-		*.lzma|*.lzma.sec)
-			ramdisk_ctype="lzma"
-			;;
-		*.lzo|*.lzo.sec)
-			ramdisk_ctype="lzo"
-			;;
-		*.lz4|*.lz4.sec)
-			ramdisk_ctype="lz4"
-			;;
-	esac
-
-	cat << EOF >> ${1}
-                ramdisk-${2} {
-                        description = "ramdisk image";
-                        data = /incbin/("${3}");
-                        type = "ramdisk";
-                        arch = "${UBOOT_ARCH}";
-                        os = "linux";
-                        compression = "${ramdisk_ctype}";
-EOF
-	if test -n "${UBOOT_RD_LOADADDRESS}"; then
-		cat << EOF >> ${1}
-                        load = <${UBOOT_RD_LOADADDRESS}>;
-EOF
-	fi
-
-	if test -n "${UBOOT_RD_ENTRYPOINT}"; then
-		cat << EOF >> ${1}
-                        entry = <${UBOOT_RD_ENTRYPOINT}>;
-EOF
-	fi
-
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${ramdisk_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS configuration section
-#
-# $1 ... .its filename
-# $2 ... Linux kernel ID
-# $3 ... DTB image ID/name
-# $4 ... ramdisk ID
-# $5 ... config ID
-# $6 ... tee ID/name
-# $7 ... default DTB ID
-fitimage_emit_section_config() {
-
-	conf_csum=${FITIMAGE_HASH_ALGO}
-	if [ -n "${UBOOT_SIGN_ENABLE}" ] ; then
-		conf_sign_keyname="${UBOOT_SIGN_KEYNAME}"
-	fi
-
-	sep=""
-	conf_desc=""
-	kernel_line=""
-	fdt_line=""
-	ramdisk_line=""
-	setup_line=""
-	default_line=""
-
-	if [ -n "${2}" ]; then
-		conf_desc="Linux kernel"
-		sep=", "
-		kernel_line="kernel = \"kernel-${2}\";"
-	fi
-
-	if [ -n "${3}" ]; then
-		conf_desc="${conf_desc}${sep}FDT blob"
-		sep=", "
-	fi
-
-	if [ -n "${4}" ]; then
-		conf_desc="${conf_desc}${sep}ramdisk"
-		sep=", "
-		ramdisk_line="ramdisk = \"ramdisk-${4}\";"
-	fi
-
-	if [ -n "${5}" ]; then
-		conf_desc="${conf_desc}${sep}setup"
-		sep=", "
-		setup_line="setup = \"setup-${5}\";"
-	fi
-
-	if [ -n "${6}" -a "x${FITIMAGE_PACK_TEE}" = "x1" ]; then
-		if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ]; then
-			loadables_line="loadables = \"${6}.optee\";"
-			loadables_pager_line="loadables = \"${6}-pager.optee\";"
-		else
-			loadables_line="loadables = \"tee-${6}\";"
-			nextnum=`expr ${6} + 1`
-			loadables_pager_line="loadables = \"tee-${nextnum}\";"
-		fi
-		final_conf_desc="${conf_desc}${sep}OPTEE OS Image"
-	else
-		loadables_line=""
-		loadables_pager_line=""
-		final_conf_desc="${conf_desc}"
-	fi
-
-	default_dtb_count=${7}
-	if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then
-		default_conf_name="${FIT_CONF_DEFAULT_DTB}"
-	else
-		default_conf_name="conf-${default_dtb_count}"
-	fi
-	cat << EOF >> ${1}
-        default = "${default_conf_name}";
-EOF
-
-	dtbcount=1
-	for DTB in ${KERNEL_DEVICETREE}; do
-		DTB=$(basename "${DTB}")
-		dtb_ext=${DTB##*.}
-		if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then
-			conf_name="${DTB}"
-		else
-			conf_name="conf-${dtbcount}"
-		fi
-
-		if [ "x${FITIMAGE_DTB_BY_NAME}" = "x1" ] ; then
-			fdt_line="fdt = \"${DTB}\";"
-		else
-			fdt_line="fdt = \"fdt-${dtbcount}\";"
-		fi
-
-# Generate a single configuration section
-			cat << EOF >> ${1}
-                ${conf_name} {
-                        description = "${final_conf_desc}";
-                        ${fdt_line}
-EOF
-			if [ "${dtb_ext}" != "dtbo" ]; then
-			cat << EOF >> ${1}
-                        ${kernel_line}
-                        ${ramdisk_line}
-                        ${setup_line}
-                        ${loadables_line}
-EOF
-			fi
-			if test -n "${FITIMAGE_HASH_ALGO}"; then
-				cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${conf_csum}";
-                        };
-EOF
-			fi
-
-			if [ ! -z "${conf_sign_keyname}" ] ; then
-
-				sign_line="sign-images = \"kernel\""
-
-				if [ -n "${3}" ]; then
-					sign_line="${sign_line}, \"fdt\""
-				fi
-
-				if [ -n "${4}" ]; then
-					sign_line="${sign_line}, \"ramdisk\""
-				fi
-
-				if [ -n "${5}" ]; then
-					sign_line="${sign_line}, \"setup\""
-				fi
-
-				sign_line="${sign_line};"
-
-				cat << EOF >> ${1}
-                        signature-1 {
-                                algo = "${conf_csum},rsa2048";
-                                key-name-hint = "${conf_sign_keyname}";
-                                ${sign_line}
-                        };
-EOF
-			fi
-
-			cat << EOF >> ${1}
-                };
-EOF
-# End single config section
-
-# Generate a single "pager" configuration section
-		if [ "${OPTEEPAGER}" = "y" ]; then
-			if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then
-				conf_name="${DTB}-pager"
-			else
-				conf_name="conf-${dtbcount}"
-			fi
-
-			cat << EOF >> ${1}
-                ${conf_name} {
-                        description = "${final_conf_desc}";
-                        ${fdt_line}
-EOF
-			if [ "${dtb_ext}" != "dtbo" ]; then
-			cat << EOF >> ${1}
-                        ${kernel_line}
-                        ${ramdisk_line}
-                        ${setup_line}
-                        ${loadables_pager_line}
-EOF
-			fi
-			if test -n "${FITIMAGE_HASH_ALGO}"; then
-				cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${conf_csum}";
-                        };
-EOF
-			fi
-
-			if [ ! -z "${conf_sign_keyname}" ] ; then
-
-				sign_line="sign-images = \"kernel\""
-
-				if [ -n "${3}" ]; then
-					sign_line="${sign_line}, \"fdt\""
-				fi
-
-				if [ -n "${4}" ]; then
-					sign_line="${sign_line}, \"ramdisk\""
-				fi
-
-				if [ -n "${5}" ]; then
-					sign_line="${sign_line}, \"setup\""
-				fi
-
-				sign_line="${sign_line};"
-
-				cat << EOF >> ${1}
-                        signature-1 {
-                                algo = "${conf_csum},rsa2048";
-                                key-name-hint = "${conf_sign_keyname}";
-                                ${sign_line}
-                        };
-EOF
-			fi
-
-			cat << EOF >> ${1}
-                };
-EOF
-		fi
-# End single config section
-
-		dtbcount=`expr ${dtbcount} + 1`
-	done
-}
-
-#
-# Assemble fitImage
-#
-# $1 ... .its filename
-# $2 ... fitImage name
-# $3 ... include ramdisk
-fitimage_assemble() {
-	kernelcount=1
-	dtbcount=""
-	ramdiskcount=${3}
-	setupcount=""
-	teecount=1
-	default_dtb_count=1
-	rm -f ${1} arch/${ARCH}/boot/${2}
-
-	fitimage_emit_fit_header ${1}
-
-	#
-	# Step 1: Prepare a kernel image section.
-	#
-	fitimage_emit_section_maint ${1} imagestart
-
-	uboot_prep_kimage
-	fitimage_ti_secure linux.bin linux.bin.sec
-	fitimage_emit_section_kernel ${1} "${kernelcount}" linux.bin.sec "${linux_comp}"
-
-	#
-	# Step 2: Prepare a DTB image section
-	#
-	if test -n "${KERNEL_DEVICETREE}"; then
-		dtbcount=1
-		dtboaddress="${UBOOT_DTBO_LOADADDRESS}"
-		for DTB in ${KERNEL_DEVICETREE}; do
-			if [ "${DTB}" = "${FIT_CONF_DEFAULT_DTB}" ]; then
-				default_dtb_count=${dtbcount}
-			fi
-			if echo ${DTB} | grep -q '/dts/'; then
-				bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used."
-				DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'`
-			fi
-			DTB_PATH="arch/${ARCH}/boot/dts/${DTB}"
-			if [ ! -e "${DTB_PATH}" ]; then
-				DTB_PATH="arch/${ARCH}/boot/${DTB}"
-			fi
-			DTB=$(basename "${DTB}")
-
-			dtb_ext=${DTB##*.}
-			if [ "${dtb_ext}" = "dtbo" ]; then
-				if [ -n "${UBOOT_DTBO_LOADADDRESS}" ]; then
-					dtb_loadline="load = <${dtboaddress}>;"
-					num1=`printf "%d\n" ${dtboaddress}`
-					num2=`printf "%d\n" ${UBOOT_DTBO_OFFSET}`
-					num3=`expr $num1 + $num2`
-					dtboaddress=`printf "0x%x\n" $num3`
-				fi
-			elif [ -n "${UBOOT_DTB_LOADADDRESS}" ]; then
-				dtb_loadline="load = <${UBOOT_DTB_LOADADDRESS}>;"
-			fi
-
-			fitimage_ti_secure ${DTB_PATH} ${DTB_PATH}.sec
-			if [ "x${FITIMAGE_DTB_BY_NAME}" = "x1" ] ; then
-				fitimage_emit_section_dtb ${1} ${DTB} ${DTB_PATH}.sec "${dtb_loadline}"
-			else
-				fitimage_emit_section_dtb ${1} "fdt-${dtbcount}" ${DTB_PATH}.sec "${dtb_loadline}"
-			fi
-			if [ "x${dtbcount}" = "x1" ]; then
-				dtbref=${DTB}
-			fi
-			dtbcount=`expr ${dtbcount} + 1`
-		done
-	fi
-
-	#
-	# Step 2a: Prepare OP/TEE image section
-	#
-	if [ "x${FITIMAGE_PACK_TEE}" = "x1" ] ; then
-		mkdir -p ${B}/usr
-		rm -f ${B}/usr/${OPTEEFLAVOR}.optee
-		if [ -e "${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}.optee" ]; then
-			cp ${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}.optee ${B}/usr/.
-		fi
-		TEE_PATH="usr/${OPTEEFLAVOR}.optee"
-		fitimage_ti_secure ${TEE_PATH} ${TEE_PATH}.sec
-		if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then
-			fitimage_emit_section_tee ${1} ${OPTEEFLAVOR}.optee ${TEE_PATH}.sec
-		else
-			fitimage_emit_section_tee ${1} "tee-${teecount}" ${TEE_PATH}.sec
-		fi
-
-		if [ "${OPTEEPAGER}" = "y" ]; then
-			teecount=`expr ${teecount} + 1`
-			rm -f ${B}/usr/${OPTEEFLAVOR}-pager.optee
-			if [ -e "${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}-pager.optee" ]; then
-				cp ${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}-pager.optee ${B}/usr/.
-			fi
-			TEE_PATH="usr/${OPTEEFLAVOR}-pager.optee"
-			fitimage_ti_secure ${TEE_PATH} ${TEE_PATH}.sec
-			if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then
-				fitimage_emit_section_tee ${1} ${OPTEEFLAVOR}-pager.optee ${TEE_PATH}.sec
-			else
-				fitimage_emit_section_tee ${1} "tee-${teecount}" ${TEE_PATH}.sec
-			fi
-		fi
-	fi
-
-	#
-	# Step 3: Prepare a setup section. (For x86)
-	#
-	if test -e arch/${ARCH}/boot/setup.bin ; then
-		setupcount=1
-		fitimage_emit_section_setup ${1} "${setupcount}" arch/${ARCH}/boot/setup.bin
-	fi
-
-	#
-	# Step 4: Prepare a ramdisk section.
-	#
-	if [ "x${ramdiskcount}" = "x1" ] ; then
-		# Find and use the first initramfs image archive type we find
-		for img in cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.gz cpio; do
-			initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-${MACHINE}.${img}"
-			initramfs_local="usr/${INITRAMFS_IMAGE}-${MACHINE}.${img}"
-			echo "Using $initramfs_path"
-			if [ -e "${initramfs_path}" ]; then
-				fitimage_ti_secure ${initramfs_path} ${initramfs_local}.sec
-				fitimage_emit_section_ramdisk ${1} "${ramdiskcount}" ${initramfs_local}.sec
-				break
-			fi
-		done
-	fi
-
-	fitimage_emit_section_maint ${1} sectend
-
-	# Force the first Kernel and DTB in the default config
-	kernelcount=1
-	if test -n "${dtbcount}"; then
-		dtbcount=1
-	fi
-	teecount=1
-
-	#
-	# Step 5: Prepare a configurations section
-	#
-	fitimage_emit_section_maint ${1} confstart
-
-	if [ "x${FITIMAGE_DTB_BY_NAME}" != "x1" ] ; then
-		dtbref="fdt-${dtbcount}"
-	fi
-	if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then
-		teeref="${OPTEEFLAVOR}"
-	else
-		teeref="${teecount}"
-	fi
-	fitimage_emit_section_config ${1} "${kernelcount}" "${dtbref}" "${ramdiskcount}" "${setupcount}" "${teeref}" "${default_dtb_count}"
-
-	fitimage_emit_section_maint ${1} sectend
-
-	fitimage_emit_section_maint ${1} fitend
-
-	#
-	# Step 6: Assemble the image
-	#
-	uboot-mkimage \
-		${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-		-f ${1} \
-		arch/${ARCH}/boot/${2}
-
-	#
-	# Step 7: Sign the image and add public key to U-Boot dtb
-	#
-	if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then
-		uboot-mkimage \
-			${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-			-F -k "${UBOOT_SIGN_KEYDIR}" \
-			-K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}" \
-			-r arch/${ARCH}/boot/${2}
-	fi
-}
-
-do_assemble_fitimage() {
-	if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then
-		cd ${B}
-		fitimage_assemble fit-image.its fitImage
-	fi
-}
-
-addtask assemble_fitimage before do_install after do_compile
-
-do_assemble_fitimage_initramfs() {
-	if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage" && \
-		test -n "${INITRAMFS_IMAGE}" ; then
-		cd ${B}
-		fitimage_assemble fit-image-${INITRAMFS_IMAGE}.its fitImage-${INITRAMFS_IMAGE} 1
-	fi
-}
-
-addtask assemble_fitimage_initramfs before do_deploy after do_install
-
-FITIMAGE_ITS_SUFFIX ?= "its"
-FITIMAGE_ITB_SUFFIX ?= "itb"
-
-FITIMAGE_ITS_IMAGE ?= "fitImage-its-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_ITS_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_ITS_BINARY ?= "fitImage-its.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_ITS_SYMLINK ?= "fitImage-its-${MACHINE}.${FITIMAGE_ITS_SUFFIX}"
-
-FITIMAGE_ITB_IMAGE ?= "fitImage-linux.bin-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_ITB_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_ITB_BINARY ?= "fitImage-linux.bin.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_ITB_SYMLINK ?= "fitImage-linux.bin-${MACHINE}.${FITIMAGE_ITB_SUFFIX}"
-
-FITIMAGE_INITRAMFS_ITS_IMAGE ?= "fitImage-its-${INITRAMFS_IMAGE}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_INITRAMFS_ITS_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_INITRAMFS_ITS_BINARY ?= "fitImage-its-${INITRAMFS_IMAGE}.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_INITRAMFS_ITS_SYMLINK ?= "fitImage-its-${INITRAMFS_IMAGE}-${MACHINE}.${FITIMAGE_ITS_SUFFIX}"
-
-FITIMAGE_INITRAMFS_ITB_IMAGE ?= "fitImage-${INITRAMFS_IMAGE}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_INITRAMFS_ITB_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_INITRAMFS_ITB_BINARY ?= "fitImage-${INITRAMFS_IMAGE}.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_INITRAMFS_ITB_SYMLINK ?= "fitImage-${INITRAMFS_IMAGE}-${MACHINE}.${FITIMAGE_ITB_SUFFIX}"
-
-kernel_do_deploy:append() {
-	# Update deploy directory
-	if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then
-		cd ${B}
-		echo "Copying fit-image.its source file..."
-		install -m 0644 fit-image.its ${DEPLOYDIR}/${FITIMAGE_ITS_IMAGE}
-		install -m 0644 arch/${ARCH}/boot/fitImage ${DEPLOYDIR}/${FITIMAGE_ITB_IMAGE}
-
-		if [ -n "${INITRAMFS_IMAGE}" ]; then
-			echo "Copying fit-image-${INITRAMFS_IMAGE}.its source file..."
-			install -m 0644 fit-image-${INITRAMFS_IMAGE}.its ${DEPLOYDIR}/${FITIMAGE_INITRAMFS_ITS_IMAGE}
-			install -m 0644 arch/${ARCH}/boot/fitImage-${INITRAMFS_IMAGE} ${DEPLOYDIR}/${FITIMAGE_INITRAMFS_ITB_IMAGE}
-		fi
-
-		cd ${DEPLOYDIR}
-		ln -sf ${FITIMAGE_ITS_IMAGE} ${FITIMAGE_ITS_SYMLINK}
-		ln -sf ${FITIMAGE_ITS_IMAGE} ${FITIMAGE_ITS_BINARY}
-		ln -sf ${FITIMAGE_ITB_IMAGE} ${FITIMAGE_ITB_SYMLINK}
-		ln -sf ${FITIMAGE_ITB_IMAGE} ${FITIMAGE_ITB_BINARY}
-
-		if [ -n "${INITRAMFS_IMAGE}" ]; then
-			ln -sf ${FITIMAGE_INITRAMFS_ITS_IMAGE} ${FITIMAGE_INITRAMFS_ITS_SYMLINK}
-			ln -sf ${FITIMAGE_INITRAMFS_ITS_IMAGE} ${FITIMAGE_INITRAMFS_ITS_BINARY}
-			ln -sf ${FITIMAGE_INITRAMFS_ITB_IMAGE} ${FITIMAGE_INITRAMFS_ITB_SYMLINK}
-			ln -sf ${FITIMAGE_INITRAMFS_ITB_IMAGE} ${FITIMAGE_INITRAMFS_ITB_BINARY}
-		fi
-	fi
-}

meta-ti-bsp/classes/kernel-uboot-legacyhs.bbclass

@@ -1,51 +0,0 @@
-#
-# Copyright OpenEmbedded Contributors
-#
-# SPDX-License-Identifier: MIT
-#
-
-# fitImage kernel compression algorithm
-FIT_KERNEL_COMP_ALG ?= "gzip"
-FIT_KERNEL_COMP_ALG_EXTENSION ?= ".gz"
-
-# Kernel image type passed to mkimage (i.e. kernel kernel_noload...)
-UBOOT_MKIMAGE_KERNEL_TYPE ?= "kernel"
-
-uboot_prep_kimage() {
-	if [ -e arch/${ARCH}/boot/compressed/vmlinux ]; then
-		vmlinux_path="arch/${ARCH}/boot/compressed/vmlinux"
-		linux_suffix=""
-		linux_comp="none"
-	elif [ -e arch/${ARCH}/boot/vmlinuz.bin ]; then
-		rm -f linux.bin
-		cp -l arch/${ARCH}/boot/vmlinuz.bin linux.bin
-		vmlinux_path=""
-		linux_suffix=""
-		linux_comp="none"
-	else
-		vmlinux_path="vmlinux"
-		# Use vmlinux.initramfs for linux.bin when INITRAMFS_IMAGE_BUNDLE set
-		# As per the implementation in kernel.bbclass.
-		# See do_bundle_initramfs function
-		if [ "${INITRAMFS_IMAGE_BUNDLE}" = "1" ] && [ -e vmlinux.initramfs ]; then
-			vmlinux_path="vmlinux.initramfs"
-		fi
-		linux_suffix="${FIT_KERNEL_COMP_ALG_EXTENSION}"
-		linux_comp="${FIT_KERNEL_COMP_ALG}"
-	fi
-
-	[ -n "${vmlinux_path}" ] && ${KERNEL_OBJCOPY} -O binary -R .note -R .comment -S "${vmlinux_path}" linux.bin
-
-	if [ "${linux_comp}" != "none" ] ; then
-		if [ "${linux_comp}" = "gzip" ] ; then
-			gzip -9 linux.bin
-		elif [ "${linux_comp}" = "lzo" ] ; then
-			lzop -9 linux.bin
-		elif [ "${linux_comp}" = "lzma" ] ; then
-			xz --format=lzma -f -6 linux.bin
-		fi
-		mv -f "linux.bin${linux_suffix}" linux.bin
-	fi
-
-	echo "${linux_comp}"
-}

meta-ti-bsp/classes/kernel_legacyhs.bbclass

@@ -1,870 +0,0 @@
-#
-# Copyright OpenEmbedded Contributors
-#
-# SPDX-License-Identifier: MIT
-#
-
-inherit linux-kernel-base kernel-module-split
-
-COMPATIBLE_HOST = ".*-linux"
-
-KERNEL_PACKAGE_NAME ??= "kernel"
-KERNEL_DEPLOYSUBDIR ??= "${@ "" if (d.getVar("KERNEL_PACKAGE_NAME") == "kernel") else d.getVar("KERNEL_PACKAGE_NAME") }"
-
-PROVIDES += "virtual/kernel"
-DEPENDS += "virtual/cross-binutils virtual/cross-cc kmod-native bc-native bison-native"
-DEPENDS += "${@bb.utils.contains("INITRAMFS_FSTYPES", "cpio.lzo", "lzop-native", "", d)}"
-DEPENDS += "${@bb.utils.contains("INITRAMFS_FSTYPES", "cpio.lz4", "lz4-native", "", d)}"
-DEPENDS += "${@bb.utils.contains("INITRAMFS_FSTYPES", "cpio.zst", "zstd-native", "", d)}"
-PACKAGE_WRITE_DEPS += "depmodwrapper-cross"
-
-do_deploy[depends] += "depmodwrapper-cross:do_populate_sysroot gzip-native:do_populate_sysroot"
-do_clean[depends] += "make-mod-scripts:do_clean"
-
-# CPE entries from NVD use linux_kernel, but the raw CVE entries from the kernel CNA have
-# vendor: linux and product: linux. Note that multiple distributions use "linux" as a product
-# name, so we need to fill vendor to avoid false positives
-CVE_PRODUCT ?= "linux_kernel linux:linux"
-
-S = "${STAGING_KERNEL_DIR}"
-B = "${WORKDIR}/build"
-KBUILD_OUTPUT = "${B}"
-OE_TERMINAL_EXPORTS += "KBUILD_OUTPUT"
-
-# we include gcc above, we dont need virtual/libc
-INHIBIT_DEFAULT_DEPS = "1"
-
-KERNEL_IMAGETYPE ?= "zImage"
-INITRAMFS_IMAGE ?= ""
-INITRAMFS_TASK ?= ""
-INITRAMFS_IMAGE_BUNDLE ?= ""
-INITRAMFS_DEPLOY_DIR_IMAGE ?= "${DEPLOY_DIR_IMAGE}"
-INITRAMFS_MULTICONFIG ?= ""
-
-# KERNEL_VERSION is extracted from source code. It is evaluated as
-# None for the first parsing, since the code has not been fetched.
-# After the code is fetched, it will be evaluated as real version
-# number and cause kernel to be rebuilt. To avoid this, make
-# KERNEL_VERSION_NAME and KERNEL_VERSION_PKG_NAME depend on
-# LINUX_VERSION which is a constant.
-KERNEL_VERSION_NAME = "${@d.getVar('KERNEL_VERSION') or ""}"
-KERNEL_VERSION_NAME[vardepvalue] = "${LINUX_VERSION}"
-KERNEL_VERSION_PKG_NAME = "${@legitimize_package_name(d.getVar('KERNEL_VERSION'))}"
-KERNEL_VERSION_PKG_NAME[vardepvalue] = "${LINUX_VERSION}"
-
-python __anonymous () {
-    pn = d.getVar("PN")
-    kpn = d.getVar("KERNEL_PACKAGE_NAME")
-
-    # XXX Remove this after bug 11905 is resolved
-    #  FILES:${KERNEL_PACKAGE_NAME}-dev doesn't expand correctly
-    if kpn == pn:
-        bb.warn("Some packages (E.g. *-dev) might be missing due to "
-                "bug 11905 (variable KERNEL_PACKAGE_NAME == PN)")
-
-    # The default kernel recipe builds in a shared location defined by
-    # bitbake/distro confs: STAGING_KERNEL_DIR and STAGING_KERNEL_BUILDDIR.
-    # Set these variables to directories under ${WORKDIR} in alternate
-    # kernel recipes (I.e. where KERNEL_PACKAGE_NAME != kernel) so that they
-    # may build in parallel with the default kernel without clobbering.
-    if kpn != "kernel":
-        workdir = d.getVar("WORKDIR")
-        sourceDir = os.path.join(workdir, 'kernel-source')
-        artifactsDir = os.path.join(workdir, 'kernel-build-artifacts')
-        d.setVar("STAGING_KERNEL_DIR", sourceDir)
-        d.setVar("STAGING_KERNEL_BUILDDIR", artifactsDir)
-
-    # Merge KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE into KERNEL_IMAGETYPES
-    type = d.getVar('KERNEL_IMAGETYPE') or ""
-    alttype = d.getVar('KERNEL_ALT_IMAGETYPE') or ""
-    types = d.getVar('KERNEL_IMAGETYPES') or ""
-    if type not in types.split():
-        types = (type + ' ' + types).strip()
-    if alttype not in types.split():
-        types = (alttype + ' ' + types).strip()
-    d.setVar('KERNEL_IMAGETYPES', types)
-
-    # KERNEL_IMAGETYPES may contain a mixture of image types supported directly
-    # by the kernel build system and types which are created by post-processing
-    # the output of the kernel build system (e.g. compressing vmlinux ->
-    # vmlinux.gz in kernel_legacyhs_do_transform_kernel()).
-    # KERNEL_IMAGETYPE_FOR_MAKE should contain only image types supported
-    # directly by the kernel build system.
-    if not d.getVar('KERNEL_IMAGETYPE_FOR_MAKE'):
-        typeformake = set()
-        for type in types.split():
-            if type == 'vmlinux.gz':
-                type = 'vmlinux'
-            typeformake.add(type)
-
-        d.setVar('KERNEL_IMAGETYPE_FOR_MAKE', ' '.join(sorted(typeformake)))
-
-    kname = d.getVar('KERNEL_PACKAGE_NAME') or "kernel"
-    imagedest = d.getVar('KERNEL_IMAGEDEST')
-
-    for type in types.split():
-        if bb.data.inherits_class('nopackages', d):
-            continue
-        typelower = type.lower()
-        d.appendVar('PACKAGES', ' %s-image-%s' % (kname, typelower))
-        d.setVar('FILES:' + kname + '-image-' + typelower, '/' + imagedest + '/' + type + '-${KERNEL_VERSION_NAME}' + ' /' + imagedest + '/' + type)
-        d.appendVar('RDEPENDS:%s-image' % kname, ' %s-image-%s (= ${EXTENDPKGV})' % (kname, typelower))
-        splitmods = d.getVar("KERNEL_SPLIT_MODULES")
-        if splitmods != '1':
-            d.appendVar('RDEPENDS:%s-image' % kname, ' %s-modules (= ${EXTENDPKGV})' % kname)
-            d.appendVar('RDEPENDS:%s-image-%s' % (kname, typelower), ' %s-modules-${KERNEL_VERSION_PKG_NAME} (= ${EXTENDPKGV})' % kname)
-            d.setVar('PKG:%s-modules' % kname, '%s-modules-${KERNEL_VERSION_PKG_NAME}' % kname)
-            d.appendVar('RPROVIDES:%s-modules' % kname, ' %s-modules-${KERNEL_VERSION_PKG_NAME}' % kname)
-
-        d.setVar('PKG:%s-image-%s' % (kname,typelower), '%s-image-%s-${KERNEL_VERSION_PKG_NAME}' % (kname, typelower))
-        d.setVar('ALLOW_EMPTY:%s-image-%s' % (kname, typelower), '1')
-
-        if d.getVar('KERNEL_IMAGETYPE_SYMLINK') == '1':
-            d.prependVar('pkg_postinst:%s-image-%s' % (kname,typelower), """set +e
-if [ -n "$D" ]; then
-    ln -sf %s-${KERNEL_VERSION} $D/${KERNEL_IMAGEDEST}/%s > /dev/null 2>&1
-else
-    ln -sf %s-${KERNEL_VERSION} ${KERNEL_IMAGEDEST}/%s > /dev/null 2>&1
-    if [ $? -ne 0 ]; then
-        echo "Filesystem on ${KERNEL_IMAGEDEST}/ doesn't support symlinks, falling back to copied image (%s)."
-        install -m 0644 ${KERNEL_IMAGEDEST}/%s-${KERNEL_VERSION} ${KERNEL_IMAGEDEST}/%s
-    fi
-fi
-set -e
-""" % (type, type, type, type, type, type, type))
-            d.setVar('pkg_postrm:%s-image-%s' % (kname,typelower), """set +e
-if [ -f "${KERNEL_IMAGEDEST}/%s" -o -L "${KERNEL_IMAGEDEST}/%s" ]; then
-    rm -f ${KERNEL_IMAGEDEST}/%s  > /dev/null 2>&1
-fi
-set -e
-""" % (type, type, type))
-
-
-    image = d.getVar('INITRAMFS_IMAGE')
-    # If the INTIRAMFS_IMAGE is set but the INITRAMFS_IMAGE_BUNDLE is set to 0,
-    # the do_bundle_initramfs does nothing, but the INITRAMFS_IMAGE is built
-    # standalone for use by wic and other tools.
-    if image:
-        if d.getVar('INITRAMFS_MULTICONFIG'):
-            d.appendVarFlag('do_bundle_initramfs', 'mcdepends', ' mc:${BB_CURRENT_MC}:${INITRAMFS_MULTICONFIG}:${INITRAMFS_IMAGE}:do_image_complete')
-        else:
-            d.appendVarFlag('do_bundle_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete')
-    if image and bb.utils.to_boolean(d.getVar('INITRAMFS_IMAGE_BUNDLE')):
-        bb.build.addtask('do_transform_bundled_initramfs', 'do_deploy', 'do_bundle_initramfs', d)
-
-    # NOTE: setting INITRAMFS_TASK is for backward compatibility
-    #       The preferred method is to set INITRAMFS_IMAGE, because
-    #       this INITRAMFS_TASK has circular dependency problems
-    #       if the initramfs requires kernel modules
-    image_task = d.getVar('INITRAMFS_TASK')
-    if image_task:
-        d.appendVarFlag('do_configure', 'depends', ' ${INITRAMFS_TASK}')
-}
-
-# Here we pull in all various kernel image types which we support.
-#
-# In case you're wondering why kernel.bbclass inherits the other image
-# types instead of the other way around, the reason for that is to
-# maintain compatibility with various currently existing meta-layers.
-# By pulling in the various kernel image types here, we retain the
-# original behavior of kernel.bbclass, so no meta-layers should get
-# broken.
-#
-# KERNEL_CLASSES by default pulls in kernel-uimage.bbclass, since this
-# used to be the default behavior when only uImage was supported. This
-# variable can be appended by users who implement support for new kernel
-# image types.
-
-KERNEL_CLASSES ?= " kernel-uimage "
-inherit_defer ${KERNEL_CLASSES}
-
-# Old style kernels may set ${S} = ${WORKDIR}/git for example
-# We need to move these over to STAGING_KERNEL_DIR. We can't just
-# create the symlink in advance as the git fetcher can't cope with
-# the symlink.
-do_unpack[cleandirs] += " ${S} ${STAGING_KERNEL_DIR} ${B} ${STAGING_KERNEL_BUILDDIR}"
-do_clean[cleandirs] += " ${S} ${STAGING_KERNEL_DIR} ${B} ${STAGING_KERNEL_BUILDDIR}"
-python do_symlink_kernsrc () {
-    s = d.getVar("S")
-    kernsrc = d.getVar("STAGING_KERNEL_DIR")
-    if s != kernsrc:
-        bb.utils.mkdirhier(kernsrc)
-        bb.utils.remove(kernsrc, recurse=True)
-        if s[-1] == '/':
-            # drop trailing slash, so that os.symlink(kernsrc, s) doesn't use s as
-            # directory name and fail
-            s = s[:-1]
-        if d.getVar("EXTERNALSRC"):
-            # With EXTERNALSRC S will not be wiped so we can symlink to it
-            os.symlink(s, kernsrc)
-        else:
-            import shutil
-            shutil.move(s, kernsrc)
-            os.symlink(kernsrc, s)
-}
-# do_patch is normally ordered before do_configure, but
-# externalsrc.bbclass deletes do_patch, breaking the dependency of
-# do_configure on do_symlink_kernsrc.
-addtask symlink_kernsrc before do_patch do_configure after do_unpack
-
-inherit kernel-arch deploy
-
-PACKAGES_DYNAMIC += "^${KERNEL_PACKAGE_NAME}-module-.*"
-PACKAGES_DYNAMIC += "^${KERNEL_PACKAGE_NAME}-image-.*"
-PACKAGES_DYNAMIC += "^${KERNEL_PACKAGE_NAME}-firmware-.*"
-
-export OS = "${TARGET_OS}"
-export CROSS_COMPILE = "${TARGET_PREFIX}"
-
-KERNEL_RELEASE ?= "${KERNEL_VERSION}"
-
-# The directory where built kernel lies in the kernel tree
-KERNEL_OUTPUT_DIR ?= "arch/${ARCH}/boot"
-KERNEL_IMAGEDEST ?= "boot"
-KERNEL_DTBDEST ?= "${KERNEL_IMAGEDEST}"
-KERNEL_DTBVENDORED ?= "0"
-
-#
-# configuration
-#
-KERNEL_VERSION = "${@get_kernelversion_headers('${B}')}"
-
-# kernels are generally machine specific
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-# U-Boot support
-UBOOT_ENTRYPOINT ?= "0x20008000"
-UBOOT_LOADADDRESS ?= "${UBOOT_ENTRYPOINT}"
-
-# Some Linux kernel configurations need additional parameters on the command line
-KERNEL_EXTRA_ARGS ?= ""
-
-EXTRA_OEMAKE += ' CC="${KERNEL_CC}" LD="${KERNEL_LD}" OBJCOPY="${KERNEL_OBJCOPY}" STRIP="${KERNEL_STRIP}"'
-EXTRA_OEMAKE += ' HOSTCC="${BUILD_CC}" HOSTCFLAGS="${BUILD_CFLAGS}" HOSTLDFLAGS="${BUILD_LDFLAGS}" HOSTCPP="${BUILD_CPP}"'
-EXTRA_OEMAKE += ' HOSTCXX="${BUILD_CXX}" HOSTCXXFLAGS="${BUILD_CXXFLAGS}"'
-# Only for newer kernels (5.19+), native pkg-config variables are set for older kernels when building kernel and modules
-EXTRA_OEMAKE += ' HOSTPKG_CONFIG="pkg-config-native"'
-
-KERNEL_ALT_IMAGETYPE ??= ""
-
-copy_initramfs() {
-	echo "Copying initramfs into ./usr ..."
-	# In case the directory is not created yet from the first pass compile:
-	mkdir -p ${B}/usr
-	# Find and use the first initramfs image archive type we find
-	rm -f ${B}/usr/${INITRAMFS_IMAGE_NAME}.cpio
-	for img in cpio cpio.gz cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.zst; do
-		if [ -e "${INITRAMFS_DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.$img" ]; then
-			cp ${INITRAMFS_DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.$img ${B}/usr/.
-			case $img in
-			*gz)
-				echo "gzip decompressing image"
-				gunzip -f ${B}/usr/${INITRAMFS_IMAGE_NAME}.$img
-				break
-				;;
-			*lz4)
-				echo "lz4 decompressing image"
-				lz4 -df ${B}/usr/${INITRAMFS_IMAGE_NAME}.$img ${B}/usr/${INITRAMFS_IMAGE_NAME}.cpio
-				break
-				;;
-			*lzo)
-				echo "lzo decompressing image"
-				lzop -df ${B}/usr/${INITRAMFS_IMAGE_NAME}.$img
-				break
-				;;
-			*lzma)
-				echo "lzma decompressing image"
-				lzma -df ${B}/usr/${INITRAMFS_IMAGE_NAME}.$img
-				break
-				;;
-			*xz)
-				echo "xz decompressing image"
-				xz -df ${B}/usr/${INITRAMFS_IMAGE_NAME}.$img
-				break
-				;;
-			*zst)
-				echo "zst decompressing image"
-				zstd -df ${B}/usr/${INITRAMFS_IMAGE_NAME}.$img
-				break
-				;;
-			esac
-			break
-		fi
-	done
-	# Verify that the above loop found a initramfs, fail otherwise
-	[ -f ${B}/usr/${INITRAMFS_IMAGE_NAME}.cpio ] && echo "Finished copy of initramfs into ./usr" || die "Could not find any ${INITRAMFS_DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.cpio{.gz|.lz4|.lzo|.lzma|.xz|.zst) for bundling; INITRAMFS_IMAGE_NAME might be wrong."
-}
-
-do_bundle_initramfs () {
-	if [ ! -z "${INITRAMFS_IMAGE}" -a x"${INITRAMFS_IMAGE_BUNDLE}" = x1 ]; then
-		echo "Creating a kernel image with a bundled initramfs..."
-		copy_initramfs
-		# Backing up kernel image relies on its type(regular file or symbolic link)
-		tmp_path=""
-		for imageType in ${KERNEL_IMAGETYPE_FOR_MAKE} ; do
-			if [ -h ${KERNEL_OUTPUT_DIR}/$imageType ] ; then
-				linkpath=`readlink -n ${KERNEL_OUTPUT_DIR}/$imageType`
-				realpath=`readlink -fn ${KERNEL_OUTPUT_DIR}/$imageType`
-				mv -f $realpath $realpath.bak
-				tmp_path=$tmp_path" "$imageType"#"$linkpath"#"$realpath
-			elif [ -f ${KERNEL_OUTPUT_DIR}/$imageType ]; then
-				mv -f ${KERNEL_OUTPUT_DIR}/$imageType ${KERNEL_OUTPUT_DIR}/$imageType.bak
-				tmp_path=$tmp_path" "$imageType"##"
-			fi
-		done
-		use_alternate_initrd=CONFIG_INITRAMFS_SOURCE=${B}/usr/${INITRAMFS_IMAGE_NAME}.cpio
-		kernel_legacyhs_do_compile
-		# Restoring kernel image
-		for tp in $tmp_path ; do
-			imageType=`echo $tp|cut -d "#" -f 1`
-			linkpath=`echo $tp|cut -d "#" -f 2`
-			realpath=`echo $tp|cut -d "#" -f 3`
-			if [ -n "$realpath" ]; then
-				mv -f $realpath $realpath.initramfs
-				mv -f $realpath.bak $realpath
-				ln -sf $linkpath.initramfs ${B}/${KERNEL_OUTPUT_DIR}/$imageType.initramfs
-			else
-				mv -f ${KERNEL_OUTPUT_DIR}/$imageType ${KERNEL_OUTPUT_DIR}/$imageType.initramfs
-				mv -f ${KERNEL_OUTPUT_DIR}/$imageType.bak ${KERNEL_OUTPUT_DIR}/$imageType
-			fi
-		done
-	fi
-}
-do_bundle_initramfs[dirs] = "${B}"
-
-kernel_legacyhs_do_transform_bundled_initramfs() {
-        # vmlinux.gz is not built by kernel
-	if (echo "${KERNEL_IMAGETYPES}" | grep -wq "vmlinux\.gz"); then
-		gzip -9cn < ${KERNEL_OUTPUT_DIR}/vmlinux.initramfs > ${KERNEL_OUTPUT_DIR}/vmlinux.gz.initramfs
-        fi
-}
-do_transform_bundled_initramfs[dirs] = "${B}"
-
-python do_package:prepend () {
-    d.setVar('STRIP',  d.getVar('KERNEL_STRIP').strip())
-}
-
-python do_devshell:prepend () {
-    os.environ["LDFLAGS"] = ''
-}
-
-addtask bundle_initramfs after do_install before do_deploy
-
-KERNEL_DEBUG_TIMESTAMPS ??= "0"
-
-kernel_legacyhs_do_compile() {
-	unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
-
-	# setup native pkg-config variables (kconfig scripts call pkg-config directly, cannot generically be overriden to pkg-config-native)
-	export PKG_CONFIG_DIR="${STAGING_DIR_NATIVE}${libdir_native}/pkgconfig"
-	export PKG_CONFIG_PATH="$PKG_CONFIG_DIR:${STAGING_DATADIR_NATIVE}/pkgconfig"
-	export PKG_CONFIG_LIBDIR="$PKG_CONFIG_DIR"
-	export PKG_CONFIG_SYSROOT_DIR=""
-
-	if [ "${KERNEL_DEBUG_TIMESTAMPS}" != "1" ]; then
-		# kernel sources do not use do_unpack, so SOURCE_DATE_EPOCH may not
-		# be set....
-		if [ "${SOURCE_DATE_EPOCH}" = "" -o "${SOURCE_DATE_EPOCH}" = "0" ]; then
-			# The source directory is not necessarily a git repository, so we
-			# specify the git-dir to ensure that git does not query a
-			# repository in any parent directory.
-			SOURCE_DATE_EPOCH=`git --git-dir="${S}/.git" log -1 --pretty=%ct 2>/dev/null || echo "${REPRODUCIBLE_TIMESTAMP_ROOTFS}"`
-		fi
-
-		ts=`LC_ALL=C date -d @$SOURCE_DATE_EPOCH`
-		export KBUILD_BUILD_TIMESTAMP="$ts"
-		export KCONFIG_NOTIMESTAMP=1
-		bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
-	else
-		ts=`LC_ALL=C date`
-		export KBUILD_BUILD_TIMESTAMP="$ts"
-		bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
-	fi
-	# The $use_alternate_initrd is only set from
-	# do_bundle_initramfs() This variable is specifically for the
-	# case where we are making a second pass at the kernel
-	# compilation and we want to force the kernel build to use a
-	# different initramfs image.  The way to do that in the kernel
-	# is to specify:
-	# make ...args... CONFIG_INITRAMFS_SOURCE=some_other_initramfs.cpio
-	if [ "$use_alternate_initrd" = "" ] && [ "${INITRAMFS_TASK}" != "" ] ; then
-		# The old style way of copying an prebuilt image and building it
-		# is turned on via INTIRAMFS_TASK != ""
-		copy_initramfs
-		use_alternate_initrd=CONFIG_INITRAMFS_SOURCE=${B}/usr/${INITRAMFS_IMAGE_NAME}.cpio
-	fi
-	for typeformake in ${KERNEL_IMAGETYPE_FOR_MAKE} ; do
-		oe_runmake ${PARALLEL_MAKE} ${typeformake} ${KERNEL_EXTRA_ARGS} $use_alternate_initrd
-	done
-}
-
-kernel_legacyhs_do_transform_kernel() {
-	# vmlinux.gz is not built by kernel
-	if (echo "${KERNEL_IMAGETYPES}" | grep -wq "vmlinux\.gz"); then
-		mkdir -p "${KERNEL_OUTPUT_DIR}"
-		gzip -9cn < ${B}/vmlinux > "${KERNEL_OUTPUT_DIR}/vmlinux.gz"
-	fi
-}
-do_transform_kernel[dirs] = "${B}"
-addtask transform_kernel after do_compile before do_install
-
-do_compile_kernelmodules() {
-	unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
-
-	# setup native pkg-config variables (kconfig scripts call pkg-config directly, cannot generically be overriden to pkg-config-native)
-	export PKG_CONFIG_DIR="${STAGING_DIR_NATIVE}${libdir_native}/pkgconfig"
-	export PKG_CONFIG_PATH="$PKG_CONFIG_DIR:${STAGING_DATADIR_NATIVE}/pkgconfig"
-	export PKG_CONFIG_LIBDIR="$PKG_CONFIG_DIR"
-	export PKG_CONFIG_SYSROOT_DIR=""
-
-	if [ "${KERNEL_DEBUG_TIMESTAMPS}" != "1" ]; then
-		# kernel sources do not use do_unpack, so SOURCE_DATE_EPOCH may not
-		# be set....
-		if [ "${SOURCE_DATE_EPOCH}" = "" -o "${SOURCE_DATE_EPOCH}" = "0" ]; then
-			# The source directory is not necessarily a git repository, so we
-			# specify the git-dir to ensure that git does not query a
-			# repository in any parent directory.
-			SOURCE_DATE_EPOCH=`git --git-dir="${S}/.git" log -1 --pretty=%ct 2>/dev/null || echo "${REPRODUCIBLE_TIMESTAMP_ROOTFS}"`
-		fi
-
-		ts=`LC_ALL=C date -d @$SOURCE_DATE_EPOCH`
-		export KBUILD_BUILD_TIMESTAMP="$ts"
-		export KCONFIG_NOTIMESTAMP=1
-		bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
-	else
-		ts=`LC_ALL=C date`
-		export KBUILD_BUILD_TIMESTAMP="$ts"
-		bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
-	fi
-	if (grep -q -i -e '^CONFIG_MODULES=y$' ${B}/.config); then
-		oe_runmake -C ${B} ${PARALLEL_MAKE} modules ${KERNEL_EXTRA_ARGS}
-
-		# Module.symvers gets updated during the
-		# building of the kernel modules. We need to
-		# update this in the shared workdir since some
-		# external kernel modules has a dependency on
-		# other kernel modules and will look at this
-		# file to do symbol lookups
-		cp ${B}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/
-		# 5.10+ kernels have module.lds that we need to copy for external module builds
-		if [ -e "${B}/scripts/module.lds" ]; then
-			install -Dm 0644 ${B}/scripts/module.lds ${STAGING_KERNEL_BUILDDIR}/scripts/module.lds
-		fi
-	else
-		bbnote "no modules to compile"
-	fi
-}
-addtask compile_kernelmodules after do_compile before do_strip
-
-kernel_legacyhs_do_install() {
-	#
-	# First install the modules
-	#
-	unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
-	if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
-		oe_runmake DEPMOD=echo MODLIB=${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION} INSTALL_FW_PATH=${D}${nonarch_base_libdir}/firmware modules_install
-		rm -f "${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION}/build"
-		rm -f "${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION}/source"
-		# Remove empty module directories to prevent QA issues
-		[ -d "${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION}/kernel" ] && find "${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION}/kernel" -type d -empty -delete
-	else
-		bbnote "no modules to install"
-	fi
-
-	#
-	# Install various kernel output (zImage, map file, config, module support files)
-	#
-	install -d ${D}/${KERNEL_IMAGEDEST}
-
-	#
-	# When including an initramfs bundle inside a FIT image, the fitImage is created after the install task
-	# by do_assemble_fitimage_initramfs.
-	# This happens after the generation of the initramfs bundle (done by do_bundle_initramfs).
-	# So, at the level of the install task we should not try to install the fitImage. fitImage is still not
-	# generated yet.
-	# After the generation of the fitImage, the deploy task copies the fitImage from the build directory to
-	# the deploy folder.
-	#
-
-	for imageType in ${KERNEL_IMAGETYPES} ; do
-		if [ $imageType != "fitImage" ] || [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" ] ; then
-			install -m 0644 ${KERNEL_OUTPUT_DIR}/$imageType ${D}/${KERNEL_IMAGEDEST}/$imageType-${KERNEL_VERSION}
-		fi
-	done
-
-	install -m 0644 System.map ${D}/${KERNEL_IMAGEDEST}/System.map-${KERNEL_VERSION}
-	install -m 0644 .config ${D}/${KERNEL_IMAGEDEST}/config-${KERNEL_VERSION}
-	install -m 0644 vmlinux ${D}/${KERNEL_IMAGEDEST}/vmlinux-${KERNEL_VERSION}
-	! [ -e Module.symvers ] || install -m 0644 Module.symvers ${D}/${KERNEL_IMAGEDEST}/Module.symvers-${KERNEL_VERSION}
-}
-
-# Must be ran no earlier than after do_kernel_checkout or else Makefile won't be in ${S}/Makefile
-do_kernel_version_sanity_check() {
-	if [ "x${KERNEL_VERSION_SANITY_SKIP}" = "x1" ]; then
-		exit 0
-	fi
-
-	# The Makefile determines the kernel version shown at runtime
-	# Don't use KERNEL_VERSION because the headers it grabs the version from aren't generated until do_compile
-	VERSION=$(grep "^VERSION =" ${S}/Makefile | sed s/.*=\ *//)
-	PATCHLEVEL=$(grep "^PATCHLEVEL =" ${S}/Makefile | sed s/.*=\ *//)
-	SUBLEVEL=$(grep "^SUBLEVEL =" ${S}/Makefile | sed s/.*=\ *//)
-	EXTRAVERSION=$(grep "^EXTRAVERSION =" ${S}/Makefile | sed s/.*=\ *//)
-
-	# Build a string for regex and a plain version string
-	reg="^${VERSION}\.${PATCHLEVEL}"
-	vers="${VERSION}.${PATCHLEVEL}"
-	if [ -n "${SUBLEVEL}" ]; then
-		# Ignoring a SUBLEVEL of zero is fine
-		if [ "${SUBLEVEL}" = "0" ]; then
-			reg="${reg}(\.${SUBLEVEL})?"
-		else
-			reg="${reg}\.${SUBLEVEL}"
-			vers="${vers}.${SUBLEVEL}"
-		fi
-	fi
-	vers="${vers}${EXTRAVERSION}"
-	reg="${reg}${EXTRAVERSION}"
-
-	if [ -z `echo ${PV} | grep -E "${reg}"` ]; then
-		bbfatal "Package Version (${PV}) does not match of kernel being built (${vers}). Please update the PV variable to match the kernel source or set KERNEL_VERSION_SANITY_SKIP=\"1\" in your recipe."
-	fi
-	exit 0
-}
-
-addtask shared_workdir after do_compile before do_compile_kernelmodules
-addtask shared_workdir_setscene
-
-do_shared_workdir_setscene () {
-	exit 1
-}
-
-emit_depmod_pkgdata() {
-	# Stash data for depmod
-	install -d ${PKGDESTWORK}/${KERNEL_PACKAGE_NAME}-depmod/
-	echo "${KERNEL_VERSION}" > ${PKGDESTWORK}/${KERNEL_PACKAGE_NAME}-depmod/${KERNEL_PACKAGE_NAME}-abiversion
-	cp ${B}/System.map ${PKGDESTWORK}/${KERNEL_PACKAGE_NAME}-depmod/System.map-${KERNEL_VERSION}
-}
-
-PACKAGEFUNCS += "emit_depmod_pkgdata"
-
-do_shared_workdir[cleandirs] += " ${STAGING_KERNEL_BUILDDIR}"
-do_shared_workdir () {
-	cd ${B}
-
-	kerneldir=${STAGING_KERNEL_BUILDDIR}
-	install -d $kerneldir
-
-	#
-	# Store the kernel version in sysroots for module-base.bbclass
-	#
-
-	echo "${KERNEL_VERSION}" > $kerneldir/${KERNEL_PACKAGE_NAME}-abiversion
-	echo "${KERNEL_LOCALVERSION}" > $kerneldir/${KERNEL_PACKAGE_NAME}-localversion
-
-	# Copy files required for module builds
-	cp System.map $kerneldir/System.map-${KERNEL_VERSION}
-	! [ -e Module.symvers ] || cp Module.symvers $kerneldir/
-	cp .config $kerneldir/
-	mkdir -p $kerneldir/include/config
-	cp include/config/kernel.release $kerneldir/include/config/kernel.release
-	if [ -e certs/signing_key.x509 ]; then
-		# The signing_key.* files are stored in the certs/ dir in
-		# newer Linux kernels
-		mkdir -p $kerneldir/certs
-		cp certs/signing_key.* $kerneldir/certs/
-	elif [ -e signing_key.priv ]; then
-		cp signing_key.* $kerneldir/
-	fi
-
-	# We can also copy over all the generated files and avoid special cases
-	# like version.h, but we've opted to keep this small until file creep starts
-	# to happen
-	if [ -e include/linux/version.h ]; then
-		mkdir -p $kerneldir/include/linux
-		cp include/linux/version.h $kerneldir/include/linux/version.h
-	fi
-
-	# As of Linux kernel version 3.0.1, the clean target removes
-	# arch/powerpc/lib/crtsavres.o which is present in
-	# KBUILD_LDFLAGS_MODULE, making it required to build external modules.
-	if [ ${ARCH} = "powerpc" ]; then
-		if [ -e arch/powerpc/lib/crtsavres.o ]; then
-			mkdir -p $kerneldir/arch/powerpc/lib/
-			cp arch/powerpc/lib/crtsavres.o $kerneldir/arch/powerpc/lib/crtsavres.o
-		fi
-	fi
-
-	if [ -d include/generated ]; then
-		mkdir -p $kerneldir/include/generated/
-		cp -fR include/generated/* $kerneldir/include/generated/
-	fi
-
-	if [ -d arch/${ARCH}/include/generated ]; then
-		mkdir -p $kerneldir/arch/${ARCH}/include/generated/
-		cp -fR arch/${ARCH}/include/generated/* $kerneldir/arch/${ARCH}/include/generated/
-	fi
-
-	if (grep -q -i -e '^CONFIG_UNWINDER_ORC=y$' $kerneldir/.config); then
-		# With CONFIG_UNWINDER_ORC (the default in 4.14), objtool is required for
-		# out-of-tree modules to be able to generate object files.
-		if [ -x tools/objtool/objtool ]; then
-			mkdir -p ${kerneldir}/tools/objtool
-			cp tools/objtool/objtool ${kerneldir}/tools/objtool/
-		fi
-	fi
-
-	# When building with CONFIG_MODVERSIONS=y and CONFIG_RANDSTRUCT=y we need
-	# to copy the build assets generated for the randstruct seed to
-	# STAGING_KERNEL_BUILDDIR, otherwise the out-of-tree modules build will
-	# generate those assets which will result in a different
-	# RANDSTRUCT_HASHED_SEED
-	if [ -d scripts/basic ]; then
-		mkdir -p ${kerneldir}/scripts
-		cp -r scripts/basic ${kerneldir}/scripts
-	fi
-
-	if [ -d scripts/gcc-plugins ]; then
-		mkdir -p ${kerneldir}/scripts
-		cp -r scripts/gcc-plugins ${kerneldir}/scripts
-	fi
-
-}
-
-# We don't need to stage anything, not the modules/firmware since those would clash with linux-firmware
-SYSROOT_DIRS = ""
-
-KERNEL_CONFIG_COMMAND ?= "oe_runmake_call -C ${S} O=${B} olddefconfig || oe_runmake -C ${S} O=${B} oldnoconfig"
-
-python check_oldest_kernel() {
-    oldest_kernel = d.getVar('OLDEST_KERNEL')
-    kernel_version = d.getVar('KERNEL_VERSION')
-    tclibc = d.getVar('TCLIBC')
-    if tclibc == 'glibc':
-        kernel_version = kernel_version.split('-', 1)[0]
-        if oldest_kernel and kernel_version:
-            if bb.utils.vercmp_string(kernel_version, oldest_kernel) < 0:
-                bb.warn('%s: OLDEST_KERNEL is "%s" but the version of the kernel you are building is "%s" - therefore %s as built may not be compatible with this kernel. Either set OLDEST_KERNEL to an older version, or build a newer kernel.' % (d.getVar('PN'), oldest_kernel, kernel_version, tclibc))
-}
-
-check_oldest_kernel[vardepsexclude] += "OLDEST_KERNEL KERNEL_VERSION"
-do_compile[postfuncs] += "check_oldest_kernel"
-
-KERNEL_LOCALVERSION ??= ""
-
-# 6.3+ requires the variable LOCALVERSION to be set to not get a "+" in
-# the local version. Having it empty means nothing will be added, and any
-# value will be appended to the local kernel version. This replaces the
-# use of .scmversion file for setting a localversion without using
-# the CONFIG_LOCALVERSION option.
-#
-# Note: This class saves the value of localversion to a file
-# so other recipes like make-mod-scripts can restore it via the
-# helper function get_kernellocalversion_file
-export LOCALVERSION = "${KERNEL_LOCALVERSION}"
-
-kernel_legacyhs_do_configure() {
-	# fixes extra + in /lib/modules/2.6.37+
-	# $ scripts/setlocalversion . => +
-	# $ make kernelversion => 2.6.37
-	# $ make kernelrelease => 2.6.37+
-	# See kernel-arch.bbclass for post v6.3 removal of the extra
-	# + in localversion. .scmversion is no longer used, and the
-	# variable LOCALVERSION must be used
-	if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ]; then
-		echo ${KERNEL_LOCALVERSION} > ${B}/.scmversion
-		echo ${KERNEL_LOCALVERSION} > ${S}/.scmversion
-	fi
-
-	if [ "${S}" != "${B}" ] && [ -f "${S}/.config" ] && [ ! -f "${B}/.config" ]; then
-		mv "${S}/.config" "${B}/.config"
-	fi
-
-	# Copy defconfig to .config if .config does not exist. This allows
-	# recipes to manage the .config themselves in do_configure:prepend().
-	if [ -f "${UNPACKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
-		cp "${UNPACKDIR}/defconfig" "${B}/.config"
-	fi
-
-	${KERNEL_CONFIG_COMMAND}
-}
-
-inherit cml1 pkgconfig
-
-EXPORT_FUNCTIONS do_compile do_transform_kernel do_transform_bundled_initramfs do_install do_configure
-
-# kernel-base becomes kernel-${KERNEL_VERSION}
-# kernel-image becomes kernel-image-${KERNEL_VERSION}
-PACKAGES = "${KERNEL_PACKAGE_NAME} ${KERNEL_PACKAGE_NAME}-base ${KERNEL_PACKAGE_NAME}-vmlinux ${KERNEL_PACKAGE_NAME}-image ${KERNEL_PACKAGE_NAME}-dev ${KERNEL_PACKAGE_NAME}-modules ${KERNEL_PACKAGE_NAME}-dbg"
-FILES:${PN} = ""
-FILES:${KERNEL_PACKAGE_NAME}-base = "${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.order ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
-FILES:${KERNEL_PACKAGE_NAME}-image = ""
-FILES:${KERNEL_PACKAGE_NAME}-dev = "/${KERNEL_IMAGEDEST}/System.map* /${KERNEL_IMAGEDEST}/Module.symvers* /${KERNEL_IMAGEDEST}/config* ${KERNEL_SRC_PATH} ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/build"
-FILES:${KERNEL_PACKAGE_NAME}-vmlinux = "/${KERNEL_IMAGEDEST}/vmlinux-${KERNEL_VERSION_NAME}"
-FILES:${KERNEL_PACKAGE_NAME}-modules = ""
-FILES:${KERNEL_PACKAGE_NAME}-dbg = "/usr/lib/debug /usr/src/debug"
-RDEPENDS:${KERNEL_PACKAGE_NAME} = "${KERNEL_PACKAGE_NAME}-base (= ${EXTENDPKGV})"
-# Allow machines to override this dependency if kernel image files are
-# not wanted in images as standard
-RRECOMMENDS:${KERNEL_PACKAGE_NAME}-base ?= "${KERNEL_PACKAGE_NAME}-image (= ${EXTENDPKGV})"
-PKG:${KERNEL_PACKAGE_NAME}-image = "${KERNEL_PACKAGE_NAME}-image-${@legitimize_package_name(d.getVar('KERNEL_VERSION'))}"
-RPROVIDES:${KERNEL_PACKAGE_NAME}-image += "${KERNEL_PACKAGE_NAME}-image"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-image += "${@oe.utils.conditional('KERNEL_IMAGETYPE', 'vmlinux', '${KERNEL_PACKAGE_NAME}-vmlinux (= ${EXTENDPKGV})', '', d)}"
-PKG:${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-${@legitimize_package_name(d.getVar('KERNEL_VERSION'))}"
-RPROVIDES:${KERNEL_PACKAGE_NAME}-base += "${KERNEL_PACKAGE_NAME}-${KERNEL_VERSION} ${KERNEL_PACKAGE_NAME}-base"
-ALLOW_EMPTY:${KERNEL_PACKAGE_NAME} = "1"
-ALLOW_EMPTY:${KERNEL_PACKAGE_NAME}-base = "1"
-ALLOW_EMPTY:${KERNEL_PACKAGE_NAME}-image = "1"
-ALLOW_EMPTY:${KERNEL_PACKAGE_NAME}-modules = "1"
-DESCRIPTION:${KERNEL_PACKAGE_NAME}-modules = "Kernel modules meta package"
-
-pkg_postinst:${KERNEL_PACKAGE_NAME}-base () {
-	if [ ! -e "$D/lib/modules/${KERNEL_VERSION}" ]; then
-		mkdir -p $D/lib/modules/${KERNEL_VERSION}
-	fi
-	if [ -n "$D" ]; then
-		depmodwrapper -a -b $D ${KERNEL_VERSION} ${KERNEL_PACKAGE_NAME}
-	else
-		depmod -a ${KERNEL_VERSION}
-	fi
-}
-
-PACKAGESPLITFUNCS =+ "split_kernel_packages"
-
-python split_kernel_packages () {
-    do_split_packages(d, root='${nonarch_base_libdir}/firmware', file_regex=r'^(.*)\.(bin|fw|cis|csp|dsp)$', output_pattern='${KERNEL_PACKAGE_NAME}-firmware-%s', description='Firmware for %s', recursive=True, extra_depends='')
-}
-
-# Many scripts want to look in arch/$arch/boot for the bootable
-# image. This poses a problem for vmlinux and vmlinuz based
-# booting. This task arranges to have vmlinux and vmlinuz appear
-# in the normalized directory location.
-do_kernel_link_images() {
-	if [ ! -d "${B}/arch/${ARCH}/boot" ]; then
-		mkdir ${B}/arch/${ARCH}/boot
-	fi
-	cd ${B}/arch/${ARCH}/boot
-	ln -sf ../../../vmlinux
-	if [ -f ../../../vmlinuz ]; then
-		ln -sf ../../../vmlinuz
-	fi
-	if [ -f ../../../vmlinuz.bin ]; then
-		ln -sf ../../../vmlinuz.bin
-	fi
-	if [ -f ../../../vmlinux.64 ]; then
-		ln -sf ../../../vmlinux.64
-	fi
-}
-addtask kernel_link_images after do_compile before do_strip
-
-python do_strip() {
-    import shutil
-
-    strip = d.getVar('KERNEL_STRIP')
-    extra_sections = d.getVar('KERNEL_IMAGE_STRIP_EXTRA_SECTIONS')
-    kernel_image = d.getVar('B') + "/" + d.getVar('KERNEL_OUTPUT_DIR') + "/vmlinux"
-
-    if (extra_sections and kernel_image.find(d.getVar('KERNEL_IMAGEDEST') + '/vmlinux') != -1):
-        kernel_image_stripped = kernel_image + ".stripped"
-        shutil.copy2(kernel_image, kernel_image_stripped)
-        oe.package.runstrip((kernel_image_stripped, 8, strip, extra_sections))
-        bb.debug(1, "KERNEL_IMAGE_STRIP_EXTRA_SECTIONS is set, stripping sections: " + \
-            extra_sections)
-}
-do_strip[dirs] = "${B}"
-
-addtask strip before do_sizecheck after do_kernel_link_images
-
-# Support checking the kernel size since some kernels need to reside in partitions
-# with a fixed length or there is a limit in transferring the kernel to memory.
-# If more than one image type is enabled, warn on any that don't fit but only fail
-# if none fit.
-do_sizecheck() {
-	if [ ! -z "${KERNEL_IMAGE_MAXSIZE}" ]; then
-		invalid=`echo ${KERNEL_IMAGE_MAXSIZE} | sed 's/[0-9]//g'`
-		if [ -n "$invalid" ]; then
-			die "Invalid KERNEL_IMAGE_MAXSIZE: ${KERNEL_IMAGE_MAXSIZE}, should be an integer (The unit is Kbytes)"
-		fi
-		at_least_one_fits=
-		for imageType in ${KERNEL_IMAGETYPES} ; do
-			size=`du -ks ${B}/${KERNEL_OUTPUT_DIR}/$imageType | awk '{print $1}'`
-			if [ $size -gt ${KERNEL_IMAGE_MAXSIZE} ]; then
-				bbwarn "This kernel $imageType (size=$size(K) > ${KERNEL_IMAGE_MAXSIZE}(K)) is too big for your device."
-			else
-				at_least_one_fits=y
-			fi
-		done
-		if [ -z "$at_least_one_fits" ]; then
-			die "All kernel images are too big for your device. Please reduce the size of the kernel by making more of it modular."
-		fi
-	fi
-}
-do_sizecheck[dirs] = "${B}"
-
-addtask sizecheck before do_install after do_strip
-
-inherit kernel-artifact-names
-
-kernel_legacyhs_do_deploy() {
-	deployDir="${DEPLOYDIR}"
-	if [ -n "${KERNEL_DEPLOYSUBDIR}" ]; then
-		deployDir="${DEPLOYDIR}/${KERNEL_DEPLOYSUBDIR}"
-		mkdir "$deployDir"
-	fi
-
-	for imageType in ${KERNEL_IMAGETYPES} ; do
-		baseName=$imageType-${KERNEL_IMAGE_NAME}
-
-		if [ -s ${KERNEL_OUTPUT_DIR}/$imageType.stripped ] ; then
-			install -m 0644 ${KERNEL_OUTPUT_DIR}/$imageType.stripped $deployDir/$baseName${KERNEL_IMAGE_BIN_EXT}
-		else
-			install -m 0644 ${KERNEL_OUTPUT_DIR}/$imageType $deployDir/$baseName${KERNEL_IMAGE_BIN_EXT}
-		fi
-		if [ -n "${KERNEL_IMAGE_LINK_NAME}" ] ; then
-			ln -sf $baseName${KERNEL_IMAGE_BIN_EXT} $deployDir/$imageType-${KERNEL_IMAGE_LINK_NAME}${KERNEL_IMAGE_BIN_EXT}
-		fi
-		if [ "${KERNEL_IMAGETYPE_SYMLINK}" = "1" ] ; then
-			ln -sf $baseName${KERNEL_IMAGE_BIN_EXT} $deployDir/$imageType
-		fi
-	done
-
-	if [ ${MODULE_TARBALL_DEPLOY} = "1" ] && (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
-		mkdir -p ${D}${root_prefix}/lib
-		if [ -n "${SOURCE_DATE_EPOCH}" ]; then
-			TAR_ARGS="--sort=name --clamp-mtime --mtime=@${SOURCE_DATE_EPOCH}"
-		else
-			TAR_ARGS=""
-		fi
-		TAR_ARGS="$TAR_ARGS --owner=0 --group=0"
-		tar $TAR_ARGS -cv -C ${D}${root_prefix} lib | gzip -9n > $deployDir/modules-${MODULE_TARBALL_NAME}.tgz
-
-		if [ -n "${MODULE_TARBALL_LINK_NAME}" ] ; then
-			ln -sf modules-${MODULE_TARBALL_NAME}.tgz $deployDir/modules-${MODULE_TARBALL_LINK_NAME}.tgz
-		fi
-	fi
-
-	if [ ! -z "${INITRAMFS_IMAGE}" -a x"${INITRAMFS_IMAGE_BUNDLE}" = x1 ]; then
-		for imageType in ${KERNEL_IMAGETYPES} ; do
-			if [ "$imageType" = "fitImage" ] ; then
-				continue
-			fi
-			initramfsBaseName=$imageType-${INITRAMFS_NAME}
-			install -m 0644 ${KERNEL_OUTPUT_DIR}/$imageType.initramfs $deployDir/$initramfsBaseName${KERNEL_IMAGE_BIN_EXT}
-			if [ -n "${INITRAMFS_LINK_NAME}" ] ; then
-				ln -sf $initramfsBaseName${KERNEL_IMAGE_BIN_EXT} $deployDir/$imageType-${INITRAMFS_LINK_NAME}${KERNEL_IMAGE_BIN_EXT}
-			fi
-		done
-	fi
-}
-
-# We deploy to filenames that include PKGV and PKGR, read the saved data to
-# ensure we get the right values for both
-do_deploy[prefuncs] += "read_subpackage_metadata"
-
-addtask deploy after do_populate_sysroot do_packagedata
-
-EXPORT_FUNCTIONS do_deploy
-
-# Add using Device Tree support
-inherit kernel-devicetree
-

meta-ti-bsp/classes/ti-devicetree-prefix.bbclass

@@ -1,43 +0,0 @@
-# Generate list of DTBs from the kernel source
-def get_dtbs_from_kernel(dts_dir, dts_prefix):
-    import os
-    import glob
-    matches = []
-
-    for prefix in dts_prefix.split():
-        filenames = glob.glob(dts_dir + prefix + '*.dts')
-        filenames += glob.glob(dts_dir + prefix + '*.dtso')
-        for filename in filenames:
-            # Before v6.2 kernels DTB Overlays shared the same name as DTB files
-            # so we need to search the file to find the type
-            with open(filename) as f:
-                file_postfix = '.dtbo' if '/plugin/;' in f.read() else '.dtb'
-            filename = os.path.split(filename)[1]
-            filename = os.path.splitext(filename)[0] + file_postfix
-            filename = os.path.join(os.path.split(prefix)[0], filename)
-            matches.append(filename)
-    return ' '.join(matches)
-
-# Generate list of "merged" DTBs from the kernel source
-# It is TI custom feature to merge DTB overlays into a single DTB
-def get_merge_dtbs_from_kernel(dts_dir, dts_pattern):
-    import os
-    matches = []
-    if dts_dir == "":
-        return ' '
-    for pattern in dts_pattern.split():
-        pattern_dir = os.path.split(pattern)[0]
-        pattern_target = os.path.split(pattern)[1].replace(".","-") + "s"
-        makefile = dts_dir + "/" + pattern_dir + "/Makefile"
-        if os.path.exists(makefile):
-            with open(makefile) as f:
-                if pattern_target in f.read():
-                    matches.append(pattern)
-    return ' '.join(matches)
-
-KERNEL_DEVICETREE = " \
-    ${@get_dtbs_from_kernel('${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts/', '${KERNEL_DEVICETREE_PREFIX}')} \
-    ${@get_merge_dtbs_from_kernel('${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts/', '${KERNEL_DEVICETREE_DTBMERGE}')} \
-"
-
-do_image_wic[depends] += "virtual/kernel:do_shared_workdir"

meta-ti-bsp/classes/ti-secdev.bbclass

@@ -1,20 +0,0 @@
-# Helper class to prepare correct environment for signing with TI Security Development Tools
-
-# K3 SECDEV scripts use OpenSSL
-DEPENDS:append:k3 = " openssl-native"
-DEPENDS:append:k3r5 = " openssl-native"
-
-# Use package version of TI SECDEV for K3 if one is not provided through the environment
-DEPENDS:append:k3 = "${@ '' if d.getVar('TI_SECURE_DEV_PKG_K3') else ' ti-k3-secdev-native' }"
-DEPENDS:append:k3r5 = "${@ '' if d.getVar('TI_SECURE_DEV_PKG_K3') else ' ti-k3-secdev-native' }"
-TI_K3_SECDEV_INSTALL_DIR = "${STAGING_DIR_NATIVE}${datadir}/ti/ti-k3-secdev"
-TI_SECURE_DEV_PKG:k3 = "${@ d.getVar('TI_SECURE_DEV_PKG_K3') or d.getVar('TI_K3_SECDEV_INSTALL_DIR') }"
-TI_SECURE_DEV_PKG:k3r5 = "${@ d.getVar('TI_SECURE_DEV_PKG_K3') or d.getVar('TI_K3_SECDEV_INSTALL_DIR') }"
-
-# For non-K3 we require the SECDEV tools be provided through the environment with the following vars
-TI_SECURE_DEV_PKG:ti33x = "${TI_SECURE_DEV_PKG_CAT}/am3x"
-TI_SECURE_DEV_PKG:ti43x = "${TI_SECURE_DEV_PKG_CAT}/am4x"
-TI_SECURE_DEV_PKG:am57xx = "${TI_SECURE_DEV_PKG_AUTO}/am5x"
-
-# The SECDEV scripts may need their own location provided through the environment
-export TI_SECURE_DEV_PKG

meta-ti-bsp/classes/uboot-sign-legacyhs.bbclass

@@ -1,131 +0,0 @@
-# This file is part of U-Boot verified boot support and is intended to be
-# inherited from u-boot recipe and from kernel-fitimage.bbclass.
-#
-# The signature procedure requires the user to generate an RSA key and
-# certificate in a directory and to define the following variable:
-#
-#   UBOOT_SIGN_KEYDIR = "/keys/directory"
-#   UBOOT_SIGN_KEYNAME = "dev" # keys name in keydir (eg. "dev.crt", "dev.key")
-#   UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
-#   UBOOT_SIGN_ENABLE = "1"
-#
-# As verified boot depends on fitImage generation, following is also required:
-#
-#   KERNEL_CLASSES ?= " kernel-fitimage "
-#   KERNEL_IMAGETYPE ?= "fitImage"
-#
-# The signature support is limited to the use of CONFIG_OF_SEPARATE in U-Boot.
-#
-# The tasks sequence is set as below, using DEPLOY_IMAGE_DIR as common place to
-# treat the device tree blob:
-#
-# * u-boot:do_install:append
-#   Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
-#   signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
-#
-# * virtual/kernel:do_assemble_fitimage
-#   Sign the image
-#
-# * u-boot:do_deploy[postfuncs]
-#   Deploy files like UBOOT_DTB_IMAGE, UBOOT_DTB_SYMLINK and others.
-#
-# For more details on signature process, please refer to U-Boot documentation.
-
-# Signature activation.
-UBOOT_SIGN_ENABLE ?= "0"
-
-# Default value for deployment filenames.
-UBOOT_DTB_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.dtb"
-UBOOT_DTB_BINARY ?= "u-boot.dtb"
-UBOOT_DTB_SYMLINK ?= "u-boot-${MACHINE}.dtb"
-UBOOT_NODTB_IMAGE ?= "u-boot-nodtb-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
-UBOOT_NODTB_BINARY ?= "u-boot-nodtb.${UBOOT_SUFFIX}"
-UBOOT_NODTB_SYMLINK ?= "u-boot-nodtb-${MACHINE}.${UBOOT_SUFFIX}"
-
-# Functions in this bbclass is for u-boot only
-UBOOT_PN = "${@d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'}"
-
-concat_dtb_helper() {
-	if [ -e "${UBOOT_DTB_BINARY}" ]; then
-		ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_BINARY}
-		ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_SYMLINK}
-	fi
-
-	if [ -f "${UBOOT_NODTB_BINARY}" ]; then
-		install ${UBOOT_NODTB_BINARY} ${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}
-		ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_SYMLINK}
-		ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_BINARY}
-	fi
-
-	# Concatenate U-Boot w/o DTB & DTB with public key
-	# (cf. kernel-fitimage.bbclass for more details)
-	deployed_uboot_dtb_binary='${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_IMAGE}'
-	if [ "x${UBOOT_SUFFIX}" = "ximg" -o "x${UBOOT_SUFFIX}" = "xrom" ] && \
-		[ -e "$deployed_uboot_dtb_binary" ]; then
-		oe_runmake EXT_DTB=$deployed_uboot_dtb_binary
-		install ${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
-	elif [ -e "${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}" -a -e "$deployed_uboot_dtb_binary" ]; then
-		cd ${DEPLOYDIR}
-		cat ${UBOOT_NODTB_IMAGE} $deployed_uboot_dtb_binary | tee ${B}/${CONFIG_B_PATH}/${UBOOT_BINARY} > ${UBOOT_IMAGE}
-	else
-		bbwarn "Failure while adding public key to u-boot binary. Verified boot won't be available."
-	fi
-}
-
-concat_dtb() {
-	if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" -a -n "${UBOOT_DTB_BINARY}" ]; then
-		mkdir -p ${DEPLOYDIR}
-		if [ -n "${UBOOT_CONFIG}" ]; then
-			for config in ${UBOOT_MACHINE}; do
-				CONFIG_B_PATH="${config}"
-				cd ${B}/${config}
-				concat_dtb_helper
-			done
-		else
-			CONFIG_B_PATH=""
-			cd ${B}
-			concat_dtb_helper
-		fi
-	fi
-}
-
-# Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
-# signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
-install_helper() {
-	if [ -f "${UBOOT_DTB_BINARY}" ]; then
-		install -d ${D}${datadir}
-		# UBOOT_DTB_BINARY is a symlink to UBOOT_DTB_IMAGE, so we
-		# need both of them.
-		install ${UBOOT_DTB_BINARY} ${D}${datadir}/${UBOOT_DTB_IMAGE}
-		ln -sf ${UBOOT_DTB_IMAGE} ${D}${datadir}/${UBOOT_DTB_BINARY}
-	else
-		bbwarn "${UBOOT_DTB_BINARY} not found"
-	fi
-}
-
-do_install:append() {
-	if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" -a -n "${UBOOT_DTB_BINARY}" ]; then
-		if [ -n "${UBOOT_CONFIG}" ]; then
-			for config in ${UBOOT_MACHINE}; do
-				cd ${B}/${config}
-				install_helper
-			done
-		else
-			cd ${B}
-			install_helper
-		fi
-	fi
-}
-
-python () {
-    if d.getVar('UBOOT_SIGN_ENABLE') == '1' and d.getVar('PN') == d.getVar('UBOOT_PN') and d.getVar('UBOOT_DTB_BINARY'):
-        kernel_pn = d.getVar('PREFERRED_PROVIDER_virtual/kernel')
-
-        # Make "bitbake u-boot -cdeploy" deploys the signed u-boot.dtb
-        d.appendVarFlag('do_deploy', 'depends', ' %s:do_deploy' % kernel_pn)
-
-        # kernerl's do_deploy is a litle special, so we can't use
-        # do_deploy:append, otherwise it would override
-        # kernel_do_deploy.
-        d.appendVarFlag('do_deploy', 'prefuncs', ' concat_dtb')
-}

meta-ti-bsp/conf/layer.conf

@@ -1,43 +0,0 @@
-# We have a conf and classes directory, append to BBPATH
-BBPATH .= ":${LAYERDIR}"
-METATIBASE := '${@os.path.normpath("${LAYERDIR}/")}'
-
-# We have a recipes directory, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "meta-ti-bsp"
-BBFILE_PATTERN_meta-ti-bsp := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-ti-bsp = "6"
-
-LAYERSERIES_COMPAT_meta-ti-bsp = "whinlatter"
-
-LICENSE_PATH += "${LAYERDIR}/licenses"
-
-LAYERDEPENDS_meta-ti-bsp = " \
-    core \
-    meta-arm \
-"
-
-LAYERRECOMMENDS_meta-ti-bsp = " \
-    openembedded-layer \
-"
-
-BBFILES_DYNAMIC += " \
-    openembedded-layer:${LAYERDIR}/dynamic-layers/openembedded-layer/recipes*/*/*.bbappend \
-"
-
-SIGGEN_EXCLUDERECIPES_ABISAFE += " \
-    mesa-pvr \
-"
-
-HOSTTOOLS_NONFATAL += "truncate xxd comm"
-
-TI_COMMON_DEPLOY ?= "${TOPDIR}/deploy-ti"
-DEPLOY_DIR_IMAGE:ti-soc = "${TI_COMMON_DEPLOY}/images/${MACHINE}"
-SDK_DEPLOY:ti-soc = "${TI_COMMON_DEPLOY}/sdk"
-PSEUDO_IGNORE_PATHS:append:ti-soc = ",${TI_COMMON_DEPLOY}"
-
-MIRRORS += " \
-    git://git.ti.com/.* git://github.com/TexasInstruments/BASENAME;protocol=https \
-    gitsm://git.ti.com/.* gitsm://github.com/TexasInstruments/BASENAME;protocol=https \
-"

meta-ti-bsp/conf/machine/am335x-hs-evm.conf

@@ -1,23 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM335x HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM335x HS EVM
-
-require conf/machine/am335x-evm.conf
-
-UBOOT_MACHINE = ""
-# Last config in the list is default
-UBOOT_CONFIG ??= "uart mmc"
-UBOOT_CONFIG[uart] = "am335x_hs_evm_uart_config"
-UBOOT_CONFIG[mmc] = "am335x_hs_evm_config"
-
-# FIT image for legacy secure devices
-KERNEL_BASE_CLASS = "kernel_legacyhs"
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"
-FIT_CONF_DEFAULT_DTB = "am335x-evm.dtb"

meta-ti-bsp/conf/machine/am437x-hs-evm.conf

@@ -1,25 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM437x HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM437x HS EVM
-
-require conf/machine/am437x-evm.conf
-
-UBOOT_MACHINE = "am43xx_hs_evm_config"
-
-OPTEEMACHINE = "ti-am43xx"
-OPTEEFLAVOR = "am43xx"
-
-EXTRA_IMAGEDEPENDS += "optee-os"
-
-# FIT image for legacy secure devices
-KERNEL_BASE_CLASS = "kernel_legacyhs"
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_PACK_TEE = "1"
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"
-FIT_CONF_DEFAULT_DTB = "am437x-gp-evm.dtb"

meta-ti-bsp/conf/machine/am57xx-hs-evm.conf

@@ -1,26 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM57xx HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM57xx HS EVM
-
-require conf/machine/am57xx-evm.conf
-
-UBOOT_MACHINE = "am57xx_hs_evm_config"
-
-OPTEEMACHINE = "ti-am57xx"
-OPTEEFLAVOR = "am57xx"
-OPTEEPAGER = "y"
-
-EXTRA_IMAGEDEPENDS += "optee-os"
-
-# FIT image for legacy secure devices
-KERNEL_BASE_CLASS = "kernel_legacyhs"
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_PACK_TEE = "1"
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"
-FIT_CONF_DEFAULT_DTB = "am57xx-evm.dtb"

meta-ti-bsp/conf/machine/am62axx-evm-k3r5.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62A HS-FS EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62A EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-UBOOT_MACHINE = "am62ax_evm_r5_defconfig"
-
-UBOOT_CONFIG_FRAGMENTS:ti-falcon = "k3_r5_falcon.config"

meta-ti-bsp/conf/machine/am62axx-evm.conf

@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62AXX EVM
-#@DESCRIPTION: Machine configuration for the TI AM62AXX EVM
-
-require conf/machine/include/am62axx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62a7 \
-    ti/k3-am62x-sk \
-    ti/k3-fpdlink \
-    ti/k3-v3link \
-"
-
-KERNEL_DEVICETREE_DTBMERGE = " \
-    ti/k3-am62a7-sk-ub954-evm-ov2312.dtb \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am62a7-phyboard-lyra-rdk.dtb \
-    ti/k3-am62a7-sk.dtb \
-    ti/k3-am62x-sk-csi2-imx219.dtbo \
-    ti/k3-am62x-sk-csi2-ov5640.dtbo \
-    ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-    ti/k3-am62x-sk-hdmi-audio.dtbo \
-"
-
-FIT_CONF_DEFAULT_DTB = "k3-am62a7-sk.dtb"
-
-UBOOT_MACHINE = "am62ax_evm_a53_defconfig"

meta-ti-bsp/conf/machine/am62dxx-evm-k3r5.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62D HS-FS EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62D EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-UBOOT_MACHINE = "am62dx_evm_r5_defconfig"

meta-ti-bsp/conf/machine/am62dxx-evm.conf

@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62DXX EVM
-#@DESCRIPTION: Machine configuration for the TI AM62DXX EVM
-
-require conf/machine/include/am62dxx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62d2 \
-    ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
-    ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
-"
-
-KERNEL_DEVICETREE = ""
-
-FIT_CONF_DEFAULT_DTB = "k3-am62d2-evm.dtb"
-
-UBOOT_MACHINE = "am62dx_evm_a53_defconfig"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "ti-dac-fw"