Adds missing update service definitions for using stateless platform
services and initializes the capsule udpate provider in se-proxy-sp
for corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Adds missing compilation option to fix psa_raw_key_aggrement test for
corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
From: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
These 2 patches causes the secure world to enter into an infinite loop
when the PSA arch tests are triggered. This is a temporary fix and the
issue needs to be investigated before the patches can be enabled.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch is required to handle one of the corner cases of the
GetNextVariableName EFI service as specified in the UEFI spec.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
From: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
This patch adds the required configs to the corstone1000 u-boot
defconfig to enable the EFI services. This is done to fix the SCT
failure reported by the SetTime_Conf and SetTime_Func.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
From: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
The patch fixes the ACS InstallMultipleProtocolInterfaces_Conf failures
in corstone1000 platform by dropping a workaround u-boot patch. The NVMXIP
initialization had some issues during u-boot boot stage which led to the
workaround patch.
Upstream-Status: Pending [Not submitted to upstream yet]
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
CFG_MAP_EXT_DT_SECURE=y should be set per platform, as it requires CFG_DT=y
to also be set, which is not the case for all the platforms out there using
optee-os. Moreover CFG_MAP_EXT_DT_SECURE is already being set conditionally
in optee-os-ts.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Split trusted-services.xml into qemuarm64-secureboot-ts.yml and
n1sdp-ts.yml as collection of Trusted Services which can be tested on
each platform has diverged.
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Make sure we setup the new variable for the configuration
of the SE-Proxy service for our machine. This will trigger
the right configuration building trusted services and all
psa-arch test pass as before.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update Trusted Services and backport an OP-TEE update which allows
interrupting the SPs by NWd interrupts. This solves the kernel stall
problems which are due to long cryptographic operations being executed
in the SWd.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The nanopb build step randomly fails in the yocto CI due to a race condition.
This change adds a patch file to disable parallel build for nanopb. This is a
temporary workaround and a proper fix will be up-streamed int he future.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Patch related with the changes to support the in/out_vec modifications
in TF-M v1.7 was merged in upstream trusted-services integration branch.
So, drop this 3 out of tree patches not needed to be applied any more.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
TF-A v2.8 does not support measured boot and FF-A which is mandatory for
PSA Initial Attestation SP to work correctly.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add information related to SPMC tests and fix stale links.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove already merged patches in trusted services integration
branch to avoid clash during apply patch stage and rebase the
remaining patches.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Run the ffa_spmc test group of xtest if the optee-spmc-test machine
feature is enabled.
Signed-off-by: Anton Antonov <Anton.Antonov@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add ta-devkit and optee-test. Change configuration to enable building
and deploying OP-TEE SPMC tests.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Anton Antonov <Anton.Antonov@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The ABI used by the arm-ffa-user driver to call into the SWd changed.
The change was driven by the MM over FF-A ABI implementation which is
used by SmmGW SP and uefi-test. uefi-test uses the same arm-ffa-user
driver as xtest hence xtest needs to be updated to use the new driver.
This xtest change is already merged up-stream but after v3.20, which is
used here.
This change adds backported xtest changes as carried patches.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change:
- cherry-picks TF-A changes from master which implement passing
TOS_FW_CONFIG DTB from the FIP package to the trusted OS.
- add an OP-TEE SPMC specific SPMC manifest file
- configures TF-A to build the manifest, add it to the FIP package
and pass it to OP-TEE as a boot argument.
This functionality needs matching changes in OPTEE (OP-TEE v3.21
or v3.20 + carried patches.)
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
OP-TEE SPMC v3.20 and TF-A v2.8 is incompatible on qemu, and OP-TEE
panics during boot because having an SPMC manifest passed to the SPMC is
mandatory since v3.20. TF-A and OP-TEE upstream already fixed this issue
by modifying the ABI between the SPMD and SPMC. Moreover qemu support in
TF-A has been extended to allow building an SPMC manifest DTS file, and
loading it from the FIP package.
This change adds the needed OP-TEE fixes as carried patches. The TF-A
change will be added in the next commit.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Split tests to groups, and enable groups based on machine features set.
This allows limiting tests to testing deployed SPs only.
Signed-off-by: Anton Antonov <Anton.Antonov@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To enable up-to date version of Trusted Services op-tee v3.20 or newer
is needed.
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change updates to latest available version of Trusted Services.
List of changes:
- adapt SP recipes to file structure changes and support for
"configurations". In TS each SP can be built in various different
setups to allow adapting to platform and integration specific
differences.
- MbedTLS dependency has been updated to v3.3.0.
- This needs new python dependencies are required in the build
environment.
- psa-acs was updated to a matching version.
- do_patch() has been updated to support the MbedTLS patch added
in TS.
- Update TS dependency patching method to use git instead of patch.
- Downgrade nanopb to match up-stream dependency version.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Gyorgy Szing <Gyorgy.Szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Even though corstone1000 platform does not support the entire PSCI APIs, it
relys on PSCI reset interface for system reset. The name of this config
changed in the new version of u-boot. This enables PSCI reset, so
the system can be resetted in u-boot again.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
It fixes and limits the partition size to fix capsule update feature
after the GPT changes.
The partitions in the second bank needs to have correct size and
the partitions in first bank should have a fixed size since corstone1000 does
not support partial update and has a limited flash to support variable size.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch aligns capsule update feature in tfm with GPT/BL1 changes.
Adjusts BL2 flash and data size and adds missing CRC checks.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove log messages, that would never show up, but clean that
mess. And fix the env script and config so that trigger the
load of kernel from reading the gpt.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The signed kernel image for the android kernel and legacy u-boot is no
longer booting. Remove this to allow for it to work until it can be
fixed.
Signed-off-by: Jon Mason <jon.mason@arm.com>
N1SDP master has now updated to TF-A v2.8.0 so we should do the same.
Remove the SHA override for the N1SDP
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enabling new features on tfm for corstone1000 increases the number of
ITS and PS assets needed. This patch increases the number of PS and ITS
assets and fixes regression on psa-ps-api-tests.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Installing SMM Gateway SP on the N1SDP may stop the platform from booting
for on-device testing in CI.
In n1sdp.yml, remove `ts-smm-gateway` if it has been added
Keep `ts-smm-gateway` in default SP set so it can still be tested with
`qemu-secureboot`
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some platforms install .elf files, so put those into the -dbg package.
This means expanding the buildpaths QA exclusion.
Whilst here, expand the comments for the other INSANE_SKIP statements.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We don't need to unset CFLAGS and LDFLAGS as the CMake file doesn't
respect them anyway.
Add CC to the unexport list for completeness, at least one of these is
needed for now as the build fails without the unexports.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some machines use components from tf-m-extras, so fetch that too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add tc1 ecosystem FVP and bits to enable in the tc1 machine config file
Also, do some hacks to speed things up.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Recent changes in upstream u-boot recipes for signed fitimages, have
caused the existing code to no longer boot. Add a newly required
variable to get it working again. Tested using tc1 FVP.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Adds OTP config to run the FVP with the new BL1 changes
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Integrates TF-M BL1 into corstone1000 platform. This needs a large
changeset since it changes how TF-M builds and packs the bl1 image.
It also adds changes to make the new BL1 compatible with GPT parser
changes. And finally it bumps to SHA to include necessary changes and fixes
on TFM master and removes already upstreamed GPT patches.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
TF-M has out-of-tree patches on external projects such as mbedtls and
qcbor. This needs to be applied in an orderly fashion to build TF-M and
other TF-M related binaries correctly.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
SCP-firmware may build components other than the SCP and MCP. Make the
MCP branch of the do_install task more generic to suport this.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The upstream official N1SDP software currently supports edk2-firmware
202211 version. This patch is to align N1SDP Yocto build with upstream
N1SDP software.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
optee-os-tadevkit is a variant of optee-os recipe to install TA devkit.
Even though it may not need local build patches, it re-uses SRC_URI and
FILESPATH from corresponding optee-os recipe. This was mistakenly added
in b061104c87.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Our machines have moved to 2.11 so we can remove the 2.10 recipe.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Thanks to Xueliang Zhong for testing that this works on N1SDP.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The install task is subtly different as the ELF binaries are named .elf
now, instead of having no extension.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that we moved in corstone1000 to use a gpt and partitions for
the wic image and flash layout. Setup TF-m to set/get FWU and
Private metadata using the partition information (start and size)
stored in the gpt table instead of fixed flash offsets as before.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
As optee-os for the N1SDP has been updated to 3.20 we need to do the
same for optee-os-tavdekit. Otherwise errors will be seen if/when
optee-os-tavdekit is built.
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This config fragment was needed to get the dev kernel working. Since it
in now allowed to fail, it is no longer necessary (and doesn't appear to
be an issue).
Signed-off-by: Jon Mason <jon.mason@arm.com>
The dev kernel can frequently fail, and is not anything that is used in
production. Allow failure to prevent CI issues but still notify that
there are potential issues.
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch adds optee-os 3.20 support on N1SDP, the optee-os 3.20
bbappend file is also added.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
meta-clang's clang recipe has an irritating interaction with oe-core's
llvm recipe which can result in build warnings, which cause builds to
fail in our pedantic CI.
The current best known workaround is to simply mask out the llvm recipes
if clang is being used.
For more details, see https://github.com/kraj/meta-clang/pull/766.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Instead of a SCP_BUILD_RELEASE boolean, add CMAKE_BUILD_TYPE and default
to RelWithDebInfo which gives us release (optimised) builds with debug
symbols in the matching .elf files.
To ensure that buildpaths don't leak into the debug symbols, pass the
debug prefix maps via CFLAGS and ASMFLAGS.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The text relocations appear to have been fixed and this skip is no
longer needed.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We want compile logs to be useful, so enable verbose logs to show what
commands are being invoked.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For some reason the shell functions are indented an extra character,
reindent to standard four spaces.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Introduce the use of a gpt partition type layout, and use
the firmware metadata as source of the current boot bank
to boot from in the different boot stages.
This needs to be a large changeset, since it touches a lot
of software components to guarantee that everything works
in an atomic way, to not break the build and/or the boot flow
of the corstone1000 platform.
fdisk -o Start,End,Sectors,Size,Type-UUID,Attrs,Name,UUID -l tmp/deploy/images/corstone1000-fvp/corstone1000-image-corstone1000-fvp.wic
Disk build/tmp/deploy/images/corstone1000-fvp/corstone1000-image-corstone1000-fvp.wic: 32 MiB, 33554432 bytes, 65536 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 5BFC084A-9B95-4024-B60B-9748F5332524
Start End Sectors Size Type-UUID Attrs Name UUID
34 39 6 3K EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 reserved_1 B1F2FC8C-A7A3-4485-87CB-16961B8847D7
40 47 8 4K 8A7A84A0-8387-40F6-AB41-A8B9A5A60D23 FWU-Metadata 3FDFFEE1-3223-4C6B-80F9-B0E7D780C21D
48 55 8 4K 8A7A84A0-8387-40F6-AB41-A8B9A5A60D23 Bkup-FWU-Metadata B3068316-5351-4998-823A-3A7B09133EC1
56 63 8 4K ECB55DC3-8AB7-4A84-AB56-EB0A9974DB42 private_metadata_replica_2 3CC3B456-DEC8-4CE3-BC5C-965483CE4828
64 71 8 4K ECB55DC3-8AB7-4A84-AB56-EB0A9974DB42 private_metadata_replica_2 DCE9C503-8DFD-4DCB-8889-647E49641552
72 271 200 100K 64BD8ADB-02C0-4819-8688-03AB4CAB0ED9 bl2_primary 9A3A8FBF-55EF-439C-80C9-A3F728033929
272 1023 752 376K D763C27F-07F6-4FF0-B2F3-060CB465CD4E tfm_primary 07F9616C-1233-439C-ACBA-72D75421BF70
1024 5119 4096 2M B5EB19BD-CF56-45E8-ABA7-7ADB228FFEA7 FIP_A B9C7AC9D-40FF-4675-956B-EEF4DE9DF1C5
5120 15199 10080 4.9M 8197561D-6124-46FC-921E-141CC5745B05 kernel_primary BF7A6142-0662-47FD-9434-6A8811980816
32784 32983 200 100K 64BD8ADB-02C0-4819-8688-03AB4CAB0ED9 bl2_secondary 3F0C49A4-48B7-4D1E-AF59-3E4A3CE1BA9F
32984 32991 8 4K D763C27F-07F6-4FF0-B2F3-060CB465CD4E tfm_secondary 009A6A12-64A6-4F0F-9882-57CD79A34A3D
32992 32999 8 4K B5EB19BD-CF56-45E8-ABA7-7ADB228FFEA7 FIP_B 9424E370-7BC9-43BB-8C23-71EE645E1273
33000 33007 8 4K 8197561D-6124-46FC-921E-141CC5745B05 kernel_secondary A2698A91-F9B1-4629-9188-94E4520808F8
65496 65501 6 3K EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 reserved_2 CCB18569-C0BA-42E0-A429-FE1DC862D660
Add new nvmxip qspi block storage device to u-boot and
the plumbing to boot using the fwu_metadata and gpt
partition information.
Make sure that fwu and fwu-backup have the correct, as defined
in spec, partition type. That will make SW pieces in the stack
identify it correctly.
Update the fvp config to use the new wic image with the gpt scheme
Depends on metadata to decide boot bank in TFA, TFM and u-boot
Using Reading partitions (GPT scheme)
changes needed:
- Rename FIP partition in wic image as defined in TF-A to FIP_A,FIP_B
- Rename metadata partitions to FWU_Metadata and Bkup-FWU-Metadata
- Enable support for GPT and PSA_FWU in TF-A
arm-bsp/corstone-1000: TF-M patch to calculate fwu metadata crc32
It's necessary to calculate the metadata crc for TF-A and U-boot
verify the metadata.
and at last remove the wic.nopt (wic no partition) as target fstype
since we now use the partitions.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Satish Kumar <satish.kumar01@arm.com>
Signed-off-by: Mohamed Omar Asaker <mohamed.omarasaker@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump the preferred corstone1000 to v3.20, drop patch
that is already included in this version.
Create the 3.20 bbappend and remove the entry in 3.18 bbappend.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Poky commit 9ef8cbcdfc85c3ce2ca52d8bee2ab6929f589383 updates
the kernel to 6.1.20 which breaks the PCI quirk patch for the N1SDP.
This change fixes it.
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
If the repository reference directory gets corrupted it's not easy to
wipe it, so add a variable CI_CLEAN_REPOS that if set in the pipeline
will clean the clones and re-fetch them.
Also, stop the fetch from detaching during the garbage collection, just
in case it was a long-running GC that got killed that caused the
corruption in the first place.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Manually check every patch that was marked as Pending and update the
patches which are actually backports.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The infrastructure for edk2 and fvp-base is already present, but not
being used. Make the changes to get it compiling cleanly, and add it to
CI.
Note: testing is not passing because edk2 isn't booting an image
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest version of EDK2. There is an issue with memory not
being initialized and hanging boot. So revert the patch that is causing
the issue until the proper solution can be found.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest version and regenerate the patches via devtool.
This causes some patch renumeration to occur, which causes some other
modifications.
Signed-off-by: Jon Mason <jon.mason@arm.com>
optee-os-3_19.inc duplicates optee-os.inc. Remove that and cleanup
the fallout. Also, remove unused 3.19 bbappend
Signed-off-by: Jon Mason <jon.mason@arm.com>
With the removal of fvp-base-arm32, we no longer have test coverage for
the external Arm toolchain. Add this to qemuarm-secureboot CI so that
there is coverage again. Note: it must be a 32bit machine, since there
are currently no aarch64 host toolchains for aarch64
Signed-off-by: Jon Mason <jon.mason@arm.com>
fvp-base-arm32 isn't a real machine and supporting it has become hacky.
Drop support and remove from meta-arm-bsp
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to the latest version of u-boot. This requires removing the new
way DRAM is handled, since we don't use dtb the way u-boot is expecting.
Also, change the default bootcmd to make things work (as that expects
env things as well).
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the various kernels available in oe-core, as well as the poky-tiny
minimal distribution (which has a minimal kernel config). This
necessitated combining some kernel bbappends to have patching coverage
for all the variants.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Make things more obvious by adding yml files for the poky defaults
instead of disregarding them in the jobs-to-kas script
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit includes :
- Rebased and fixed N1SDP kernel PCIe quirk patches to apply on 6.1 kernel
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The UEFI capsule generated is in the incorrect build directory.
This patch copies it to IMGDEPLOYDIR.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Mirrors of meta-arm may focus their development on a small subset of
MACHINEs so provide the option to restrict the boards that are built on
CI using the variable BUILD_ENABLE_REGEX. If set, it conditionally
enables builds; if unset there is no change in behavior.
This variable could be overridden in a scheduled build, to e.g. build
all the MACHINEs weekly.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update tfa version to v2.8. Also, fiptool uses tfa sources. So, keep
it with the rest of tfa to prevent the version from becoming stale.
NOTE: tf-a-tests is being held back for corstone1000 due to compilation
errors.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Defining a task called do_deploy in an image recipe causes the
license_image bbclass in OE-core to think the recipe is not an image
recipe, which causes errors with license information collection if you
have an image recipe which depends on an image recipe using this
bbclass.
To fix this, and to add support for caching the signed binaries, use a
single task, do_sign_images (and its setscene task). The implementation
is based on deploy.bbclass, so the sstate is responsible for installing
the signed binaries in ${DEPLOY_DIR_IMAGE}, but using a different name
so that license information collection still works as expected.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To simplify adding support for new versions of TF-M scripts in the
future, create a common .inc file with the non-version-specific
configuration.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To simplify adding support for new versions of TF-M in the future,
create a common .inc file with the non-version-specific configuration.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To try and prevent trusted-firmware-m and trusted-firmware-m-scripts
from becoming out of sync in the future, create a common
trusted-firmware-m-1.7.0-src.inc which defines all the repositories and
their SHAs for both. Include this file in both recipes.
Add a SUMMARY and DESCRIPTION to trusted-firmware-m-scripts.
Update mbedtls to 3.2.1 (the recommended version for TF-M 1.7.0)
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Factor out the image signing arguments in tfm_image_sign.bbclass into
its own variable, TFM_IMAGE_SIGN_ARGS, so that it can be customized on a
per-machine basis if necessary.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the TF-M image signing scripts to use the TF-M 1.7.0 sources, so
it is in sync with the TF-M recipe itself.
Synchronize the trusted-firmware-m and -scripts Python dependencies
with the in-repo requirements.txt files. This requires a recipe to be
carried for pyhsslms.
1.7.0 introduces the --measured-boot-record argument to the image
signing script, which is required to maintain existing behavior. Add it
to the arguments in the tfm_sign_image bbclass.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
TF-M provides IPC as a SPM backend which gives SPM and each Secure Partition
it's own execution context. And provides higher isolation levels.
corstone1000 isolation level is 2. Hence, switching to IPC backend.
Signed-off-by: Mohamed Omar Asaker <mohamed.omarasaker@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change adds patches to align psa crypto client of TS with TF-Mv1.7
running on secure enclave of corstone1000
The patches updating
- PSA Crypto SID defines values
- psa_ipc_crypto_pack_iovec structure
- Fix inputs and outputs passed to in/out_vec to match crypto service
expectations
Signed-off-by: Mohamed Omar Asaker <mohamed.omarasaker@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Mirrors of meta-arm may have the persistent cache directory mounted in a
different place. To make it easier to configure, define this location
using a single $CACHE_DIR variable.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This repository doesn't tag releases, so just track the latest SHA.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
IMAGE_TYPES += "wic.nopt" is effective if the bbclass is included
using IMAGE_CLASSES, but not if included directly (using inherit) due to
file parse ordering.
To support applying wic_nopt locally (i.e. for certain image recipes but
not others), change to use :append.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To support using the wic_nopt bbclass from BSP layers other than
meta-arm-bsp, move it to meta-arm.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch uses the json config file for UEFI capsule generation
as this is efficient and easily scalable to generate multiple
capsules.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The BBCLASSEXTEND configuration can generate native sdk and target
recipes as well. The cp command used in do_install will
create host contamination issues for these recipes, so this patch
makes the recipe native only.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Inherits the UEFI capsule generation class and configures the capsule
variables for the wic.nopt image
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This class currently supports only a single firmware binary. The
required capsule parameters needs to be set, if not the build fails.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The native recipe installs the UEFI capsule generation tool
along with the other base tools to native sysroot.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
TF-M does not use persistent release branches and the release-* branches
have been removed from the repository, so switch the branches to master.
Also update the tf-m-tests SRVREV to the 1.7.0 tag, not the RC2.
99% based on a patch by Peter Hoyes <Peter.Hoyes@arm.com>.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This bbappend is only used by qemuarm*, which now use 6.1, so this can
be removed.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Currently the N1SDP patches haven't been ported to 6.1 and the
port/testing isn't trivial. Until the relevant team has done the port to
6.1, carry a 5.19 kernel in meta-arm-bsp for N1SDP.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Apply the patch from scp-firmware to the third copy of the buggy
Makefiles which fail randomly under parallel builds.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
2 symbols were added to the arm64 kernel defconfig without the
corresponding code. Remove these unnecessary pieces to avoid the
warning.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.1 and rebase the patches on
top of this new version.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump corstone500 kernel version to 6.1 and drop the not
longer needed patch regarding the SND_SOC_AC97 config
option in multi_v7.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump corstone1000 to u-boot version 2023.01, as at it
do some trailing spaces cleanup.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Make sure the master branch track the other masters instead
of being lock to langdale.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To avoid having always tools that depend on git ls or other
git plumbing to include and spin around the enormous content of
the build directory.
Just add it to the ignore file and make that build content,
that will never get in the repo invisible to git and tools.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For some reason the kas 3.2.1 container fails:
No such file or directory: '/builds/engineering/yocto/meta-arm/ci/ci/base.yml'
Note the repeated /ci/, which is wrong.
Pin the kas container to 3.2 for now until this is resolved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
The initramfs needs to be very small, but since oe-core d6a62e kmod has
enabled OpenSSL support which doubles the size of the initramfs,
resulting in boot failures.
Signed-off-by: Ross Burton <ross.burton@arm.com>
With the 6.1 kernel, fvp-base logs the warning:
[NOTE]: 'CONFIG_ARM_CPUIDLE' last val (y) and .config val (n) do not match
This is because the kernel idle configs have changed. Remove this
entry, as it is no longer necessary.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update kernel patches and configs for the v6.1 kernel. Previously, it
was using the linux defconfig as a starting point. It is now using the
local kernel metadata.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update qemuarm-secureboot to work with the latest u-boot version and
remove the old, unneeded version from meta-arm
Signed-off-by: Jon Mason <jon.mason@arm.com>
New arm-ffa-tee and arm-ffa-user drivers are compatible with 5.* and 6.1 kernels.
Signed-off-by: Anton Antonov <Anton.Antonov@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream has updated u-boot to v2023.01, but the update is causing
problems with some machines. Temporarily add a v2022.10 recipe until
the issues can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream has updated u-boot to v2023.01, but the update is causing
problems with some machines. Temporarily add a v2022.10 recipe until
the issues can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
A recent commit compressed the kernel image (to Image.gz) and
by default enabled an initramfs image. In the case for when
such that (initramfs) is not desirable, the deploy step of the
Juno firmware will still try to install the Image file, (not
Image.gz), so this fails:
ERROR: firmware-image-juno-1.0-r0 do_deploy: ExecutionError('/oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477', 1, None, None)
ERROR: Logfile of failure stored in: /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/log.do_deploy.360477
Log data follows:
| DEBUG: Executing python function sstate_task_prefunc
| DEBUG: Python function sstate_task_prefunc finished
| DEBUG: Executing shell function do_deploy
| cp: cannot stat '/oe/build/tmp-glibc/deploy/images/juno/Image': No such file or directory
| WARNING: /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477:152 exit 1 from 'cp -L -f /oe/build/tmp-glibc/deploy/images/juno/Image /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/image/juno-firmware-19.06/SOFTWARE/'
| WARNING: Backtrace (BB generated script):
| #1: do_deploy, /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477, line 152
| #2: main, /oe/build/tmp-glibc/work/juno-oe-linux/firmware-image-juno/1.0-r0/temp/run.do_deploy.360477, line 163
NOTE: recipe firmware-image-juno-1.0-r0: task do_deploy: Failed
ERROR: Task (../meta-arm/meta-arm-bsp/recipes-bsp/images/firmware-image-juno.bb:do_deploy) failed with exit code '1'
This updates the else case for when an initramfs image is not
in use so that the right kernel image is deployed, by using
the KERNEL_IMAGETYPE variable, to use either version of the
kernel image.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SRC_URI, SRCREV AND SRCBRANCH variables are currently used
inconsistently across recipes in meta-arm, leading to difficulties
customizing the configuration in external BSP layers where necessary.
Standardize usage across commonly used recipes so that:
* SRC_URI contains a SRC_URI_PACKAGE_NAME variable per component which
can be used to easily configure a mirror. This variable uses
default assignment so that it can be easily overridden using an
environment variable, e.g. to point to an internal mirror that cannot
be committed externally.
* SRCBRANCH is defined per component.
* SRCREV is defined per component.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For models that require a license, ARMLMD_LICENSE_FILE is used to define
the location of a license file or server. If the variable is not set in
Bitbake it will not be set in the model environment.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
FVP_ENV_PASSTHROUGH may contain variables that have not been set.
d.getVar returns None in this case. Detect this and skip setting the
variable in the model environment.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Define FVP_ENV_PASSTHROUGH's vardeps to equal itself, so that the
fvpconf is regenerated if any of the defined variables change.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
aa89fe3f ensured environment variables necessary for GUI applications
are passed through to the model despite runfvp env var restrictions. Add
XAUTHORITY to this list. This is useful when doing X-forwarding with
Kas, which creates its own home directory.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the Arm GCC source to the latest version. Also, update the GCC
patches to apply cleanly, removing those that are no longer relevant.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Disable fatal warnings for tfm. This removes issues with RWX and others
when using the new binary toolchain versions.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change u-boot and machine config to default to booting a compressed
initramfs. This allows for easier testing. A compressed image is
needed as the image is too big for the storage, and the error notifying
of such is vague.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Kas 3.2 ships python3-subunit, so we don't need to try to install that
anymore.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Kas 3.2 has a 'dump' plugin, so use that instead of cat in a shell.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This job doesn't use the standard helpers, so needs to pass these
explicitly otherwise it can pick up an old SHA.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade to v2022.10
This includes Corstone-1000 out of tree patches.
FF-A patches are the latest sent to U-Boot mailing list (v8).
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rebase corstone500 u-boot patches to 2022.10 version.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since oe-core 868dfb4 rng-tools is no longer depended on by openssh, so
we don't need to remove it ourself.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
meta-clang now builds pixman with GCC until this is resolved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now we're using master these workarounds are not needed anymore.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We're now compatible with oe-core master, so update the CI to build
against master branches instead of langdale.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The oe_import() function was removed in oe-core when addpylib was
added[1]. However, meta-arm-toolchain doesn't ship any library code so
this call doesn't do anything useful anyway.
[1] 1f56155e91da2030ee0a5e93037c62e1349ba89f
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
OE-core 4901c9d471cab99d52876842980222ce271b66e4 "base: Switch to use
addpylib directive and BB_GLOBAL_PYMODULES" means that ${LAYERDIR}/lib
is no longer searched by default when loading test controllers.
meta-arm defines some custom test controllers for testing FVPs, so add
an addpylib directive to meta-arm/conf/layer.conf to fix testimage on
FVPs.
testimage.bbclass still has its own test case loading logic based on
BBLAYERS, so other layers that only define test cases (not controllers
or other Python libraries) need no further changes.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I7fab638b4a1610d30efad2dae214378d096e0fc4
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core's master branch is diverging from langdale and meta-arm will be
following this, so drop compatibility with langdale in master so we're
free to diverge too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SCP-firmware CMake compile step automatically attempts to execute
cppcheck if both:
* cppcheck can be located using find_program
* DISABLE_CPPCHECK is not defined
cppcheck is not readily available in OE-core and is not an essential
part of the compilation process for end-users, so explicitly disable the
cppcheck step by passing DISABLE_CPPCHECK to CMake.
Additionally, because the OE-core CMake toolchain file cannot be used,
find_program may locate cppcheck on the host machine, which will cause
the build to fail if it is not the recommended version (as it is in
recent Linux distros).
Issue-Id: SCM-5864
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ia87a0cbbb67ac1d6f3b26cfb5747a85b46131f81
Signed-off-by: Jon Mason <jon.mason@arm.com>
If CMAKE_BUILD_TYPE=debug (lowercase), SCP-firmware builds with debug
compiler flags but BUILD_MODE_DEBUG is not defined in C code so features
that are conditionally enabled/disabled in debug mode are not active.
Pass capitalized "Debug" and "Release" strings to CMAKE_BUILD_TYPE to
ensure Debug mode is fully enabled when SCP_BUILD_RELEASE = "0".
SCP_BUILD_RELEASE = "1" (the default) for all machines in meta-arm-bsp
so they are unaffected.
Issue-Id: SCM-5864
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I93220420eedd2e3e6c169679efcaf4642dd5bc51
Signed-off-by: Jon Mason <jon.mason@arm.com>
The include file should be pointing to `optee-os-3.19.0` instead of
`optee-os-3_19` (which does not exist).
Fixes: 3259a2a840 ("arm/optee: support optee 3.19")
Signed-off-by: Theodore A. Roth <theodore_roth@trimble.com>
Signed-off-by: Theodore A. Roth <troth@openavr.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
apply_local_src_patches.bbclass was added in a previous patch to handle
the application of patch files located inside the fetched source code.
find is used to collect the patch files which does not guarantee the
order of its output. Pipe the output of find into sort to ensure patch
files are applied in the correct order.
Issue-Id: SCM-5864
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I1082fb7a726a7745289a5aa8bb6447bef57a94b0
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that the FVP is available for both aarch64 and x86-64, don't set a
tag so this can run on both architectures.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There is now a beta release of the Base-A AEM FVP for aarch64!
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We can download both x86-64 and aarch64 binaries, so ensure the SRC_URI
entry is named to identify them.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There is a new optee version 3.19. Currently, qemuarm-secureboot cannot boot
optee 3.19 out-of-the-box. This pins optee-os version to 3.18 for
qemuarm-secureboot.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
From: Emekcan <emekcan.aras@arm.com>
Adds build configuration to support optee-os 3.19 for N1SDP.
Also, it patches optee-os to support external DT for N1SDP.
Signed-off-by: Emekcan <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Moves optee-3.18 and optee-tadevkit patches into
related directories.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The libts recipe assumes generated cmake file will be suffixed with
'-noconfig'. This is only true when building with the default type
i.e. "".
Check which target cmake file has been generated before trying to
patch it. This fixes 'no such file' error when building with an
explicit type (Debug, Release, etc).
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Apply patch to use the stateless platform service calls
Calls to psa_connect is not needed and psa_call can be called
directly with a pre defined handle.
Signed-off-by: Mohamed Omar Asaker <mohamed.omarasaker@arm.com>
The meta-gem5 layer is unmaintained and gem5 is incompatible with Python
3.11, so won't work with master without work that is still ongoing.
Signed-off-by: Ross Burton <ross.burton@arm.com>
The meta-atp layer is unmaintained and gem5 is incompatible with Python
3.11, so won't work with master without work that is still ongoing.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Add set -e so errors are fatal.
Allow HOST_ARCH and VER to be overridden by the environment, for testing.
Pull the tarball basename into a variable to reduce duplication.
Turn the wget call into a function to reduce duplication.
Drop the big-endian binaries as we never use those.
Signed-off-by: Ross Burton <ross.burton@arm.com>
meta-clang has a langdale branch now, so unset the explicit refspec.
linux-yocto needs to use non-clang objcopy, apply the change locally
until the commit has been merged into meta-clang's langdale branch.
perf needs some patches backported, until that has been done use gcc to
build perf.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Timing Annotation is a feature of the model that enables high-level
performance estimations to be made [1]. It is not needed to demonstrate
a functioning software stack so set FASTSIM_DISABLE_TA to 1 in the model
environment to disable this feature. This also improves model
performance.
[1] https://developer.arm.com/documentation/100965/1119/Timing-Annotation
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
DEFAULT_TAG and CPU_REQUEST are being used to help with internal Gitlab
pipeline setups know which type of machines to run on, but has no value
outside of Arm Corp. Gitlab CI allows for variables to be overridden
by default. So, we can give it a default value of NULL/empty and have
everything work internally and externally by default.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Tag all jobs with the DEFAULT_TAG variable so each instance can control
what tags the jobs have, whilst still explicitly tagging the jobs which
need specific tags (such as x86_64 for jobs which need to run x86-only
binaries)
Signed-off-by: Ross Burton <ross.burton@arm.com>
The Kas container needs to use the entrypoint as that is where the user
changes from root to a normal user.
Also set the KUBERNETES_CPU_REQUEST to the variable CPU_REQUEST as this
needs to be tuned per-deployment.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Update version in documentation.
Issue-Id: SCM-4874
Signed-off-by: Robbie Cao <robbie.cao@arm.com>
Change-Id: Ic66bdcdc5c6309331f80faab6eaf2e3e936a5da4
Signed-off-by: Jon Mason <jon.mason@arm.com>
721bec25 "arm/fvp: Join cli arguments in verbose logging" changed the
verbose output of FVPRunner to print the generated arguments using
shlex.join instead of as a list. However, this function is only
available in Python >= 3.8, whereas OE-core currently supports Python
3.6.
To fix this, backport its one-line implementation to a local function
shlex_join and update the call site.
Issue-Id: SCM-5314
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I56cab9dddcd0a91272464be15742a6ee726dad41
Signed-off-by: Jon Mason <jon.mason@arm.com>
Aligning the user guide with the latest Corstone1000 SW updates.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrades the Corstone1000 FVP to the latest release
version.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Ensure meta-atp recipes are only performed if a compatible machine is
selected.
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Previously, meta-atp extended the original gem5 recipe to add the ATP
Engine models; the .bbappend was complex, because it pulled from two
sources, and it was not possible to make machine-based overrides, as it
is a native recipe.
To solve this, we use the recent EXTRAS feature to add the gem5 models
from a different recipe.
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The m5 readfile recipe provides general utility for gem5 users to
run any script on OS boot. We hence move it to the meta-gem5 layer.
Signed-off-by: Adrian Herrera <adrian.herrera@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
By making m5readfile into its own recipe, we avoid modifications to the
m5ops recipe when using the meta-atp layer, which break the Yocto
compatibility of the layer.
Signed-off-by: Adrian Herrera <adrian.herrera@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Test failed because there was no reference to maintainers in the
meta-atp README.
Following the common structure of other layers in the meta-arm
repository, the README in meta-atp now refers to the top-level README,
and a documentation directory contains the guidance that was present in
the original meta-atp README.
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add support for n1sdp to trusted-services bbappends and rework some
things to make it easier to add more in the future.
Signed-off-by: Jon Mason <jon.mason@arm.com>
As TF-M ships patches that it needs applied to mbedcrypto, we apply them as
part of do_patch by using a postfunc. There is an issue when do_patch is
executed after do_deploy_source_date_epoch_setscene and apply_local_patches
tries to apply the patches already applied.
To fix this, make usage of the apply_local_src_patches bbclass.
Change-Id: Ia115b540b37ad3a2cce30e1e0461abd1f5a6ccc1
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This class is to be inherited by recipes where there are patches located inside
the fetched source code which need to be applied.
The following variables need to be set:
LOCAL_SRC_PATCHES_INPUT_DIR is the directory from where the patches are located
LOCAL_SRC_PATCHES_DEST_DIR is the directory where the patches will be applied
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I8f9c16a5fbc9d5569cba60136560f1951408bd60
Signed-off-by: Jon Mason <jon.mason@arm.com>
In d8e9ee8fd53b7620e72b2dfebb2e8d464b737dbb the finalize method was removed.
Signed-off-by: David Bagonyi <david.bagonyi@gmail.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
World builds are trying to build trusted services, which has a
dependency on meta-python. To avoid having to add a layer dependency
for meta-arm on meta-python, limit the compatible machines to the ones
using it (which already have a meta-python dependency).
Signed-off-by: Jon Mason <jon.mason@arm.com>
"git" is the version and need not be part of the bbappend name. Since
this isn't being done in any other part of meta-arm-bsp (and not
uniformly in the same directory), rename the bbappends to have the %
wild card.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Start a new thread to simultaneously log the output of FVP and the
telnet output if the --verbose flag is passed to runfvp. So that
ConsolePortParser can read the same stream, use itertools.tee to
temporarily duplicate the stream.
Use a custom log format string with an escape character to ensure that
log output always starts at the beginning of a line when interleaved
with console output.
Issue-Id: SCM-5314
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I3e815d9d899425e0d2af619524f09f2eda87562c
Signed-off-by: Jon Mason <jon.mason@arm.com>
It is often useful to inspect the FVP output after running the tests.
Refactor OEFVPSerialTarget._create_logfile into
OEFVPSSHTarget._create_log_filename, so that all FVP test controllers
are able to create secondary log files.
Pass a filehandle to the stdout argument of run_fvp so that the FVP
output is asynchronously logged to a file. Change the port parsing logic
to read back from the same log file instead of reading the stdout
directly.
Issue-Id: SCM-5314
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I2ddb423fa0d896c13d3e96884858c680c4d34555
Signed-off-by: Jon Mason <jon.mason@arm.com>
To simplify the FVPRunner class, create a separate ConsolePortParser
class to handle reading an iterator of lines and parsing port numbers
for FVP consoles. Use this in runfvp and the test targets.
This refactor also allows the stream being monitored to be changed more
easily, e.g. to a log file.
Issue-Id: SCM-5314
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Iade3a4c803fb355b04af7afa298d0a41fe707d94
Signed-off-by: Jon Mason <jon.mason@arm.com>
FVPRunner relies heavily on asyncio, despite there being very little
concurrent work happening. Additionally, while the runfvp entry point
starts an asyncio runner, it is not practical to have a single asyncio
runtime during testimage, which is fully synchronous.
Refactor to use subprocess.Popen and related functionality. The process
object has a similar interface to its async equivalent.
Cascade the API changes to runfvp and the test target classes.
Issue-Id: SCM-5314
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I3e7517e8bcbb3b93c41405d43dbd8bd24a9e7eb8
Signed-off-by: Jon Mason <jon.mason@arm.com>
It is sometimes helpful to copy and paste the cli arguments from the
verbose runfvp output (e.g. to test with a development FVP build), but
currently the arguments are printed as a Python list. Use
shlex.join(cli) to safely join the arguments together in form that can
be reused directly in a shell.
Issue-Id: SCM-5314
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ibb5c5ed45d02e241cb3858f68740fb9d4e89357a
Signed-off-by: Jon Mason <jon.mason@arm.com>
Recent changes appear to have fixed clang issues. Unfortunately,
hafnium gn visibility is not done properly. So, a patch to that is
needed to get it working.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Aligning the release notes with the latest Corstone1000 SW updates.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Use --prefix instead of --root when installing the Python modules to
ensure that build paths are not embedded in the compiled .pyc files.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Without virtio-rng enabled kernel 5.19 takes ages to finish
random number generator initialisation which causes
issues with ssh and other crypto related services.
Signed-off-by: Anton Antonov <Anton.Antonov@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
GetNextVariableName() should return EFI_BUFFER_TOO_SMALL
when NameSize is smaller than the actual NameSize. It
currently returns EFI_BUFFER_OUT_OF_RESOURCES due to setting
max_name_len incorrectly. This fixes max_name_len error by
replacing it with actual NameSize request by u-boot.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
As in EDK-2 and EDK-2 test code, setVariable() with 0
attributes means a delete variable requiest. Currently,
smm gateway doesn't handle this scenario. This commit
adds that support
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enabling ESRT in trusted services increased the need for more
assets at protected storage level, since we now save FMP data
, capsule update, like Image Info as non volatile EFI
variables.
So, just change the default configuration for the corstone1000
to handle this.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Reorder patch list headers, move psa api test patch that
should be applied to all psa api test from a crypto specific
directory to a more generic "psa-apitest" directory.
Create a inc file for the psa api test to make sure all out of
tree patches from trusted services are applied to all test
source directories, and move mm communicator buffer details to
each SP, and finally set it up differently as it
should/is expected to be at libts.
With this setup all psa-api test for crypto and attestation
passed.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
At the apply ts patch stage, first check if they are patches
to be applied. Because if not, this would break the apply
patch stage with an error.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There are some cases where PN is not expanded into linux-yocto in the
arm-ffa-transport.inc file required from linux-yocto_%.bbappend,
because of the := usage, in those cases PN gets "defaultpkgname".
To fix the issue, rename "linux-yocto" folder into "files" and adjust
ARMFILESPATHS to point to that in linux-yocto_%.bbappend, prepend
ARMFILESPATHS to FILESEXTRAPATHS in arm-ffa-transport.inc.
Remove ARMFILESPATHS prepend from FILESEXTRAPATHS for corstone1000 in
meta-arm-bsp, because the platform has always the "arm-ffa" in
MACHINE_FEATURES, which causes ARMFILESPATHS to be prepended.
While there, remove the FILESEXTRAPATHS prepend of ARMFILESPATHS for
the n1sdp that will be added by arm-ffa-transport.inc only when
needed.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bring fvp-base and fvp-base-arm32 to match what is currently being done
in other fvps, and clean up the fvps to use a single fvp yml file (which
should enable better adding and removing of issues common to fvps, like
xorg test bugs).
Signed-off-by: Jon Mason <jon.mason@arm.com>
opencsd and gator-daemon aren't currently being build. Add them to the
base build so that they can be verified to at least compile.
Signed-off-by: Jon Mason <jon.mason@arm.com>
These changes are to build and install optee test for
N1SDP
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
N1SDP has 2 DRAM's. This change is to register 2nd DRAM which starts at
0x8080000000. Linux uses 1KB of this memory to share data with optee-os.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bitbake variables were being set in KAS for the unique Gitlab CI
configuration being used internally. While this should not have been
significantly detrimental for other setups, this shouldn't be necessary
with proper runner setup. Removing them here to all for a more generic
CI experience.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Apply shared patch to trusted services that is used to compile
psa crypto api tests to include change in packed-c request
message in the eaed update structure to be in sync with the
serialize/deserialize in TS side.
As at it, move the other corstone1000 specific patch file to
meta-arm-bsp where it should be.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
These changes are to add support for readthedocs for
corstone1000 platform. readthedocs server traces
any changes to to corstone1000 documents and will trigger
a build which will generate html file which can will be
rendered by corstone1000.docs.arm.com server
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
These changes are to pass appropriate MMC card configuration to
corstone1000 FVP.
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Port crypto config to psa arch test api suite.This
needs to move to arm-bsp since is corstone1000 specific
configuration
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
@@ -4,7 +4,7 @@ OE-Core's [oeqa][OEQA] framework provides a method of performing runtime tests o
Tests can be configured to run automatically post-build by setting the variable `TESTIMAGE_AUTO="1"`, e.g. in your Kas file or local.conf.
There are two main methods of testing, using different test "targets".
There are two main methods of testing, using different test "targets". Both test targets generate an additional log file with the prefix 'fvp_log' in the image recipe's `${WORKDIR}/testimage` containing the FVP's stdout.
You expressly assume all liabilities and risks relating to your use or operation
of Your Software and Your Hardware designed or modified using the Arm Tools,
including without limitation, Your software or Your Hardware designed or
intended for safety-critical applications. Should Your Software or Your Hardware
prove defective, you assume the entire cost of all necessary servicing, repair
or correction.
***********************
Release notes - 2023.06
***********************
Known Issues or Limitations
---------------------------
- FPGA supports Linux distro install and boot through installer. However, FVP only supports openSUSE raw image installation and boot.
- Due to the performance uplimit of MPS3 FPGA and FVP, some Linux distros like Fedora Rawhide can not boot on Corstone-1000 (i.e. user may experience timeouts or boot hang).
- PSA Crypto tests (psa-crypto-api-test command) take 30 minutes to complete for FVP and 1 hour for MPS3.
- Corstone-1000 SoC on FVP doesn't have a secure debug peripheral. It does on the MPS3 .
- The following limitations listed in the previous release are still applicable:
- UEFI Compliant - Boot from network protocols must be implemented -- FAILURE
- Known limitations regarding ACS tests - see previous release's notes.
Platform Support
-----------------
- This software release is tested on Corstone-1000 FPGA version AN550_v2
- The external-system can not be reset individually on (or using) AN550_v1 FPGA release. However, the system-wide reset still applies to the external-system.
- FPGA supports Linux distro install and boot through installer. However, FVP only supports openSUSE raw image installation and boot.
- Due to the performance uplimit of MPS3 FPGA and FVP, some Linux distros like Fedora Rawhide can not boot on Corstone-1000 (i.e. user may experience timeouts or boot hang).
- Below SCT FAILURE is a known issues in the FVP:
UEFI Compliant - Boot from network protocols must be implemented -- FAILURE
- Below SCT FAILURE is a known issue when a terminal emulator (in the system where the user connects to serial ports) does not support 80x25 or 80x50 mode:
EFI_SIMPLE_TEXT_OUT_PROTOCOL.SetMode - SetMode() with valid mode -- FAILURE
- Known limitations regarding ACS tests: The behavior after running ACS tests on FVP is not consistent. Both behaviors are expected and are valid;
The system might boot till the Linux prompt. Or, the system might wait after finishing the ACS tests.
In both cases, the system executes the entire test suite and writes the results as stated in the user guide.
Platform Support
-----------------
- This software release is tested on Corstone-1000 FPGA version AN550_v1
- The following tests only work on Corstone-1000 FPGA: ACS tests (SCT, FWTS,
BSA), manual capsule update test, Linux distro install and boot, and
psa-arch-tests.
- Only the manual capsule update from UEFI shell is supported on FPGA.
- Due to flash size limitation and to support A/B banks,the wic image provided
by the user should be smaller than 15MB.
- The failures in PSA Arch Crypto Test are known limitations with crypto
library. It requires further investigation. The user can refer to `PSA Arch Crypto Test Failure Analysis In TF-M V1.5 Release <https://developer.trustedfirmware.org/w/tf_m/release/psa_arch_crypto_test_failure_analysis_in_tf-m_v1.5_release/>`__
for the reason for each failing test.
Release notes - 2021.10.29
--------------------------
Software Features
-----------------
This initial release of Corstone-1000 supports booting Linux on the Cortex-A35
and TF-M/MCUBOOT in the Secure Enclave. The following components are present in
the release:
- Linux kernel version 5.10
- U-Boot 2021.07
- OP-TEE version 3.14
- Trusted Firmware-A 2.5
- Trusted Firmware-M 1.4
Platform Support
----------------
- This Software release is tested on Corstone-1000 Fast Model platform (FVP) version 11.16.21
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Abdellatif El Khlifi
Tomás González
Emekcan Aras
Denys Dmytriyenko
Adam Johnston
Rui Miguel Silva
Gyorgy Szing
Anton Antonov
Jon Mason
Ross Burton
Peter Hoyes
Xueliang Zhong
Satish Kumar
Gowtham Suresh Kumar
Mohamed Omar Asaker
Khem Raj
Daniel Díaz
Qi Feng
Theodore A. Roth
Robbie Cao
Adrián Herrera Arcila
Diego Sueiro
David Bagonyi
Vishnu Banavath
Luca Fancellu
Jose Quaresma
