linux-ti-staging-rt: update to the latest

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README

@@ -11,12 +11,6 @@ layers: meta
 branch: master
 
 
-When not depending on meta-openembedded and not using systemd, you may need to
-mask few miscellaneous recipes requiring systemd, by adding this to local.conf:
-
-BBMASK = "meta-ti/recipes-misc"
-
-
 The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
 distributions and layer stacks, such as:
 distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
@@ -27,4 +21,3 @@ Please follow the recommended setup procedures of your OE distribution.
 Send pull requests, patches, comments or questions to meta-ti@yoctoproject.org
 
 Maintainers: Denys Dmytriyenko <denys@ti.com>
-             Koen Kooi <koen@dominion.thruhere.net>

classes/sdcard_image.bbclass

@@ -1,156 +0,0 @@
-inherit image
-
-# Add the fstypes we need
-IMAGE_FSTYPES_append = " tar.bz2 sdimg"
-
-# Ensure required utilities are present
-IMAGE_DEPENDS_sdimg = "genext2fs-native e2fsprogs-native"
-
-# Change this to match your host distro
-LOSETUP ?= "/sbin/losetup"
-
-# Since these need to go in /etc/fstab we can hardcode them
-# Since the vars are weakly assigned, you can override them from your local.conf
-LOOPDEV ?= "/dev/loop1"
-LOOPDEV_BOOT ?= "/dev/loop2"
-LOOPDEV_FS ?= "/dev/loop3"
-
-# Default to 4GiB images
-SDIMG_SIZE ?= "444" 
-
-# FS type for rootfs
-ROOTFSTYPE ?= "ext4"
-
-BOOTPARTNAME_beaglebone = "BEAGLE_BONE"
-BOOTPARTNAME ?= "${MACHINE}"
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
-# Files and/or directories to be copied into the vfat partition
-FATPAYLOAD ?= ""
-
-IMAGE_CMD_sdimg () {
-	SDIMG=${WORKDIR}/sd.img
-
-	# sanity check fstab entry for boot partition mounting
-	if [ "x$(cat /etc/fstab | grep ${LOOPDEV_BOOT} | grep ${WORKDIR}/tmp-mnt-boot | grep user || true)" = "x" ]; then
-		echo "/etc/fstab entries need to be created with the user flag for the loop devices like:"
-		echo "${LOOPDEV_BOOT} ${WORKDIR}/tmp-mnt-boot vfat user 0 0"
-        false
-	fi
-
-	# cleanup loops
-	for loop in ${LOOPDEV} ${LOOPDEV_BOOT} ${LOOPDEV_FS} ; do
-		${LOSETUP} -d $loop || true
-	done
-
-	# If an SD image is already present, reuse and reformat it
-	if [ ! -e ${SDIMG} ] ; then
-		dd if=/dev/zero of=${SDIMG} bs=$(echo '255 * 63 * 512' | bc) count=${SDIMG_SIZE}
-	fi
-
-	${LOSETUP} ${LOOPDEV} ${SDIMG}
-
-	# Create partition table
-	dd if=/dev/zero of=${LOOPDEV} bs=1024 count=1024
-	SIZE=$(/sbin/fdisk -l ${LOOPDEV} | grep Disk | grep bytes | awk '{print $5}')
-	CYLINDERS=$(echo $SIZE/255/63/512 | bc)
-	{
-	echo ,9,0x0C,*
-	echo ,,,-
-	} | /sbin/sfdisk -D -H 255 -S 63 -C ${CYLINDERS} ${LOOPDEV}
-
-	# Prepare loop devices for boot and filesystem partitions
-	BOOT_OFFSET=32256
-	FS_OFFSET_SECT=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /"|cut -d " " -f 2)
-	FS_OFFSET=$(echo "$FS_OFFSET_SECT * 512" | bc)
-	FS_SIZE_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /g" \ 
-	|cut -d " " -f 4 | cut -d "+" -f 1)
- 
-	LOOPDEV_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep FAT | perl -p -i -e "s/\s+/ /g"|cut -d " " -f 5)
-	LOOPDEV_BYTES=$(echo "$LOOPDEV_BLOCKS * 1024" | bc)
-
-	${LOSETUP} -d ${LOOPDEV}
-
-	${LOSETUP} ${LOOPDEV_BOOT} ${SDIMG} -o ${BOOT_OFFSET} 
-
-	/sbin/mkfs.vfat ${LOOPDEV_BOOT} -n ${BOOTPARTNAME} $LOOPDEV_BLOCKS
-
-	# Prepare filesystem partition
-	# Copy ubi used by flashing scripts
-	if [ -e  ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ] ; then
-		echo "Copying UBIFS image to file system"
-		cp ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${IMAGE_ROOTFS}/boot/fs.ubi
-	fi
-
-	# Prepare boot partion. First mount the boot partition, and copy the boot loader and supporting files
-	# from the root filesystem
-
-	mkdir -p ${WORKDIR}/tmp-mnt-boot
-	mount $LOOPDEV_BOOT ${WORKDIR}/tmp-mnt-boot
-
-	echo "Copying bootloaders into the boot partition"
-	if [ -e ${IMAGE_ROOTFS}/boot/MLO ] ; then
-		cp -v ${IMAGE_ROOTFS}/boot/MLO ${WORKDIR}/tmp-mnt-boot 
-	else
-		cp -v ${DEPLOY_DIR_IMAGE}/MLO ${WORKDIR}/tmp-mnt-boot
-	fi
-
-	# Check for u-boot SPL
-	if [ -e ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ] ; then
-		suffix=img
-	else
-		suffix=bin
-	fi
-
-	cp -v ${IMAGE_ROOTFS}/boot/uEnv.txt ${WORKDIR}/tmp-mnt-boot || true
-	cp -v ${IMAGE_ROOTFS}/boot/user.txt ${WORKDIR}/tmp-mnt-boot || true
-	cp -v ${IMAGE_ROOTFS}/boot/uImage ${WORKDIR}/tmp-mnt-boot || true
-
-	if [ -e ${IMAGE_ROOTFS}/boot/u-boot.$suffix ] ; then
-		cp -v ${IMAGE_ROOTFS}/boot/{u-boot.$suffix} ${WORKDIR}/tmp-mnt-boot || true
-	else
-		cp -v ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.$suffix ${WORKDIR}/tmp-mnt-boot/u-boot.$suffix 
-	fi
-
-	if [ -n ${FATPAYLOAD} ] ; then
-		echo "Copying payload into VFAT"
-		for entry in ${FATPAYLOAD} ; do
-				# add the || true to stop aborting on vfat issues like not supporting .~lock files
-				cp -av ${IMAGE_ROOTFS}$entry ${WORKDIR}/tmp-mnt-boot || true
-		done
-	fi
-
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${IMAGE_ROOTFS}/etc/image-version-info
-
-	# Cleanup VFAT mount
-	echo "Cleaning up VFAT mount"
-	umount ${WORKDIR}/tmp-mnt-boot
-	${LOSETUP} -d ${LOOPDEV_BOOT} || true
-
-	# Prepare rootfs parition
-	echo "Creating rootfs loopback"
-	${LOSETUP} ${LOOPDEV_FS} ${SDIMG} -o ${FS_OFFSET}
-
-	FS_NUM_INODES=$(echo $FS_SIZE_BLOCKS / 4 | bc)
-
-	case "${ROOTFSTYPE}" in
-		ext3)
-				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
-				tune2fs -L ${IMAGE_NAME} -j ${LOOPDEV_FS}
-				;;
-		ext4)
-				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
-				tune2fs -L ${IMAGE_NAME} -j -O extents,uninit_bg,dir_index ${LOOPDEV_FS}
-				;;
-		*)
-				echo "Please set ROOTFSTYPE to something supported"
-				exit 1
-				;;
-	esac
-
-	${LOSETUP} -d ${LOOPDEV_FS} || true
-
-	gzip -c ${WORKDIR}/sd.img > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-${IMAGEDATESTAMP}.img.gz
-	rm -f ${WORKDIR}/sd.img
-}

conf/layer.conf

@@ -6,4 +6,19 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
 BBFILE_COLLECTIONS += "meta-ti"
 BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-ti = "10"
+BBFILE_PRIORITY_meta-ti = "6"
+
+LICENSE_PATH += "${LAYERDIR}/licenses"
+
+SIGGEN_EXCLUDERECIPES_ABISAFE += " \
+    omapdrm-pvr \
+    omap5-sgx-ddk-um-linux \
+    ti-ipc \
+    ti-ipc-rtos \
+    cmem-mod \
+    hplib-mod \
+    gdbserverproxy-module-drv \
+    debugss-module-drv \
+    uio-module-drv \
+    mpm-transport \
+"

conf/machine/am180x-evm.conf

@@ -5,13 +5,12 @@
 require conf/machine/include/davinci.inc
 require conf/machine/include/omapl138.inc
 
-UBOOT_MACHINE = "da850evm_config"
+UBOOT_MACHINE = "da850_am18xxevm_config"
+UBOOT_SUFFIX = "ais"
+
 UBOOT_ENTRYPOINT = "0xc0008000"
 UBOOT_LOADADDRESS = "0xc0008000"
 
-MACHINE_FEATURES = "kernel26 serial ethernet"
+IMAGE_FSTYPES += "tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyS2"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omapl138-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"

conf/machine/am335x-evm.conf

@@ -1,23 +1,18 @@
 #@TYPE: Machine
 #@NAME: AM335x EVM
 #@DESCRIPTION: Machine configuration for the TI AM335x EVM
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
-
-GUI_MACHINE_CLASS = "smallscreen"
 
 require conf/machine/include/ti33x.inc
 
-IMAGE_FSTYPES += "ubi tar.bz2"
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyO0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
-
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more
 # details about this board please see
@@ -29,7 +24,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 1988"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4600"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -38,10 +33,3 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 1988"
 # UBI: sub-page size:              512
 # UBI: VID header offset:          2048 (aligned 2048)
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "am335x_evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/am3517-evm.conf

@@ -2,38 +2,23 @@
 #@NAME: AM3517 EVM
 #@DESCRIPTION: Machine configuration for the TI Sitara AM3517 EVM
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
-
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "ubi tar.bz2"
+IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 USE_VT = "2"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "am3517_evm_config"
 XLOAD_MACHINE = "am3517evm_config"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen ethernet"
-
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -48,4 +33,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/am37x-evm.conf

@@ -2,37 +2,19 @@
 #@NAME: AM37x EVM
 #@DESCRIPTION: Machine configuration for the TI AM37x EVM
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
-
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "jffs2 tar.bz2"
+IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS0"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "omap3_evm_config"
-XLOAD_MACHINE = "omap3evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"
+SERIAL_CONSOLE = "115200 ttyO0"
 
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -47,4 +29,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/am387x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM389x evm
-#@DESCRIPTION: Machine configuration for the AM389x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/am389x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: am389x evm
-#@DESCRIPTION: Machine configuration for the am389x evm
-
-require conf/machine/include/ti816x.inc

conf/machine/am437x-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: AM437x EVM
+#@DESCRIPTION: Machine configuration for the TI AM437x EVM
+
+require conf/machine/include/ti43x.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 994 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 2200"
+
+# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   262144 bytes (256 KiB)
+# UBI: sub-page size:              4096
+# UBI: VID header offset:          4096 (aligned 4096)
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/am57xx-evm.conf

@@ -0,0 +1,34 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+UBOOT_MACHINE = "am57xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 6400"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/beagleboard.conf

@@ -2,27 +2,14 @@
 #@NAME: Beagleboard machine
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board 
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
+require conf/machine/include/omap3.inc
 
 # Only has DVI connector for external screen
 GUI_MACHINE_CLASS = "bigscreen"
 
-require conf/machine/include/omap3.inc
+IMAGE_FSTYPES += "tar.gz ubi"
+EXTRA_IMAGECMD_jffs2 = "-lnp"
 
-# SPL build
-EXTRA_IMAGEDEPENDS = "u-boot"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
-
-IMAGE_FSTYPES += "tar.bz2 ubi"
-EXTRA_IMAGECMD_jffs2 = "-lnp "
-
-# Guesswork
 SERIAL_CONSOLE = "115200 ttyO2"
 
 UBOOT_MACHINE = "omap3_beagle_config"
@@ -44,8 +31,6 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
 
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
-
 # For a modularized kernel we want to drag in networking, sound, rtc etc."
-MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl"
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl \
+  kernel-module-snd-soc-omap kernel-module-snd-soc-omap-mcbsp kernel-module-snd-soc-omap3beagle"

conf/machine/beaglebone.conf

@@ -2,25 +2,13 @@
 #@NAME: BeagleBone machine
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board 
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
+require conf/machine/include/ti33x.inc
 
 # Only has DVI connector for external screen
 GUI_MACHINE_CLASS = "bigscreen"
 
-require conf/machine/include/ti33x.inc
-EXTRA_IMAGEDEPENDS = "u-boot"
+IMAGE_FSTYPES += "tar.gz"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
-
-IMAGE_FSTYPES += "tar.bz2 "
-
-# Guesswork
 SERIAL_CONSOLE = "115200 ttyO0"
 
-UBOOT_MACHINE = "am335x_evm_config"
-
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+UBOOT_MACHINE = "am335x_boneblack_config"

conf/machine/c6a814x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: c6a814x evm
-#@DESCRIPTION: Machine configuration for the c6a814x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/c6a816x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: c6a816x evm
-#@DESCRIPTION: Machine configuration for the c6a816x evm
-
-require conf/machine/include/ti816x.inc

conf/machine/dm814x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: DM814x evm
-#@DESCRIPTION: Machine configuration for the DM814x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/dra7xx-evm.conf

@@ -0,0 +1,34 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+UBOOT_MACHINE = "dra7xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 6400"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/hawkboard.conf

@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@NAME: OMAP-L138 based board
-#@DESCRIPTION: Machine configuration for the TI Hawkboard
-
-require conf/machine/include/davinci.inc
-require conf/machine/include/omapl138.inc
-
-UBOOT_MACHINE = "da850_omapl138_evm_config"
-UBOOT_ENTRYPOINT = "0xc0008000"
-UBOOT_LOADADDRESS = "0xc0008000"
-
-MACHINE_FEATURES = "kernel26 serial ethernet ide screen"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 971 LEBs (123293696 bytes, 117.6 MiB), available 958 LEBs (121643008 bytes, 116.0 MiB), LEB size 126976 bytes (124.0 KiB)
-MKUBIFS_ARGS = "-m 2048 -e 126976 -c 948"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-
-SERIAL_CONSOLE = "115200 ttyS2"

conf/machine/include/davinci.inc

@@ -1,14 +1,13 @@
 require conf/machine/include/tune-arm926ejs.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r51"
-
+MACHINE_KERNEL_PR = "r53"
 
 KERNEL_IMAGETYPE = "uImage"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
-
+PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
 UBOOT_MACHINE = "davinci_dvevm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
@@ -19,6 +18,4 @@ EXTRA_IMAGEDEPENDS += "u-boot"
 SERIAL_CONSOLE ?= "115200 ttyS0"
 EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
 
-#ROOT_FLASH_SIZE = "29"
-
 MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa"

conf/machine/include/dra7xx.inc

@@ -0,0 +1,4 @@
+require conf/machine/include/omap-a15.inc
+SOC_FAMILY_append = ":dra7xx"
+
+MACHINE_FEATURES += "pci"

conf/machine/include/keystone.inc

@@ -0,0 +1,27 @@
+SOC_FAMILY = "keystone"
+require conf/machine/include/soc-family.inc
+
+DEFAULTTUNE ?= "cortexa15thf-neon"
+require conf/machine/include/tune-cortexa15.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r10"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "boot-monitor"
+
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci"
+MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"

conf/machine/include/omap-a15.inc

@@ -0,0 +1,34 @@
+SOC_FAMILY = "omap-a15"
+require conf/machine/include/soc-family.inc
+
+DEFAULTTUNE ?= "cortexa15thf-neon"
+require conf/machine/include/tune-cortexa15.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r7"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "virtual/bootloader"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-video-fbdev"
+
+GUI_MACHINE_CLASS = "smallscreen"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx mmip"

conf/machine/include/omap3.inc

@@ -1,15 +1,39 @@
 SOC_FAMILY = "omap3"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa8thf-neon"
 require conf/machine/include/tune-cortexa8.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r121"
+MACHINE_KERNEL_PR = "r126"
 
 KERNEL_IMAGETYPE = "uImage"
 
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "omap3_evm_config"
+XLOAD_MACHINE = "omap3evm_config"
+
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
-EXTRA_IMAGEDEPENDS += "u-boot x-load"
+# If SPL is not used, may need to add x-load
+EXTRA_IMAGEDEPENDS += "u-boot"
 
+# List common SoC features, may need to add touchscreen/ethernet for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa sgx"

conf/machine/include/omap4.inc

@@ -1,23 +1,24 @@
 SOC_FAMILY = "omap4"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa9thf-neon"
 require conf/machine/include/tune-cortexa9.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
-           xserver-xorg-extension-dri \
-           xserver-xorg-extension-dri2 \
-           xserver-xorg-extension-glx \
+           xserver-xorg-module-exa \
            xf86-input-evdev \
-           xf86-video-fbdev" 
+           xf86-video-omap"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r1"
+MACHINE_KERNEL_PR = "r3"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_MACHINE = "omap4_panda_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"

conf/machine/include/ti33x.inc

@@ -1,14 +1,42 @@
 SOC_FAMILY = "ti33x"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa8thf-neon"
 require conf/machine/include/tune-cortexa8.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r12"
 
-KERNEL_IMAGETYPE = "uImage"
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r22"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am335x_evm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
 EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/ti43x.inc

@@ -0,0 +1,42 @@
+SOC_FAMILY = "ti43x"
+require conf/machine/include/soc-family.inc
+
+DEFAULTTUNE ?= "cortexa9thf-neon"
+require conf/machine/include/tune-cortexa9.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r3"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am43xx_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/ti814x.inc

@@ -1,26 +0,0 @@
-SOC_FAMILY = "ti814x"
-require conf/machine/include/soc-family.inc
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti81xx-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "ti8148_evm_config_nand"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Only build u-boot
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# Ship all kernel modules
-IMAGE_FSTYPES += "jffs2 tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lqn -e 128"
-SERIAL_CONSOLE = "115200 ttyO0"
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 ethernet"

conf/machine/include/ti816x.inc

@@ -1,26 +0,0 @@
-SOC_FAMILY = "ti816x"
-require conf/machine/include/soc-family.inc
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti81xx-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "ti8168_evm_config"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Only build u-boot
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# Ship all kernel modules
-IMAGE_FSTYPES += "jffs2 tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lqn -e 128"
-SERIAL_CONSOLE = "115200 ttyO2"
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 ethernet"

conf/machine/k2e-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2E machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2e_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2e"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2g-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2G machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2g_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2g"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1926"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/k2hk-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2hk_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2hk"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2l-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2L machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2l_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2l"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1926"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/omap3-touchbook.conf

@@ -1,49 +0,0 @@
-#@TYPE: Machine
-#@NAME: Always Innovating touchbook
-#@DESCRIPTION: Machine configuration for the http://www.alwaysinnovating.com/touchbook/
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-fbdev \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/omap3.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-IMAGE_FSTYPES += "tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lnp "
-
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyS2"
-
-UBOOT_MACHINE = "omap3_beagle_config"
-XLOAD_MACHINE = "beagleboard_config"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    129024 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1996 LEBs
-MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-
-
-
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa touchscreen"

conf/machine/omap3evm.conf

@@ -1,40 +1,23 @@
 #@TYPE: Machine
 #@NAME: OMAP3 EVM
 #@DESCRIPTION: Machine configuration for the TI OMAP3 EVM
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
 
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "jffs2 tar.bz2"
+IMAGE_FSTYPES += "jffs2 tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
 SERIAL_CONSOLE = "115200 ttyS0"
 USE_VT = "0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "omap3_evm_config"
-XLOAD_MACHINE = "omap3evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"
+EXTRA_IMAGEDEPENDS += "x-load"
 
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -49,4 +32,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/omap5-evm.conf

@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: OMAP5 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP5 uEVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4000"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+UBOOT_MACHINE = "omap5_uevm_config"

conf/machine/pandaboard.conf

@@ -4,15 +4,11 @@
 
 require conf/machine/include/omap4.inc
 
-UBOOT_MACHINE = "omap4_panda_config"
-
 GUI_MACHINE_CLASS = "bigscreen"
 
-IMAGE_FSTYPES += "tar.bz2"
+IMAGE_FSTYPES += "tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyO2"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
-MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen touchscreen usbgadget usbhost vfat"
-
-
+MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen usbgadget usbhost vfat sgx"

licenses/TI-TFL

@@ -0,0 +1,62 @@
+TEXAS INSTRUMENTS TEXT FILE LICENSE
+
+Copyright (c) [earliest year] - [latest year] Texas Instruments Incorporated
+
+All rights reserved not granted herein.
+
+Limited License.
+
+Texas Instruments Incorporated grants a world-wide, royalty-free,
+non-exclusive license under copyrights and patents it now or hereafter owns
+or controls to make, have made, use, import, offer to sell and sell
+("Utilize") this software subject to the terms herein.  With respect to the
+foregoing patent license, such license is granted  solely to the extent that
+any such patent is necessary to Utilize the software alone.  The patent
+license shall not apply to any combinations which include this software,
+other than combinations with devices manufactured by or for TI ("TI
+Devices").  No hardware patent is licensed hereunder.
+
+Redistributions must preserve existing copyright notices and reproduce this
+license (including the above copyright notice and the disclaimer and (if
+applicable) source code license limitations below) in the documentation
+and/or other materials provided with the distribution
+
+Redistribution and use in binary form, without modification, are permitted
+provided that the following conditions are met:
+
+* No reverse engineering, decompilation, or disassembly of this software is
+permitted with respect to any software provided in binary form.
+
+* any redistribution and use are licensed by TI for use only with TI
+Devices.
+
+* Nothing shall obligate TI to provide you with source code for the software
+licensed and provided to you in object code.
+
+If software source code is provided to you, modification and redistribution
+of the source code are permitted provided that the following conditions are
+met:
+
+* any redistribution and use of the source code, including any resulting
+derivative works, are licensed by TI for use only with TI Devices.
+
+* any redistribution and use of any object code compiled from the source
+code and any resulting derivative works, are licensed by TI for use only
+with TI Devices.
+
+Neither the name of Texas Instruments Incorporated nor the names of its
+suppliers may be used to endorse or promote products derived from this
+software without specific prior written permission.
+
+DISCLAIMER.
+
+THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+NO EVENT SHALL TI AND TI'S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

licenses/TI-TSPA

@@ -0,0 +1,206 @@
+Texas Instruments Incorporated
+Technology and Software Publicly Available
+Software License Agreement
+
+
+Important - Please read the following license agreement carefully.  This is
+a legally binding agreement.  Do not click "i have read and agree" or use
+(as applicable) the Licensed Materials unless: (1) you are authorized to
+accept and agree to the terms of this license agreement on behalf of
+yourself or your company (as applicable) and (2) you intend to be bound by
+the terms of this license agreement on behalf of yourself or your company
+(as applicable).
+
+This Software License Agreement ("Agreement") is a legal agreement between
+you (either an individual or entity) and Texas Instruments Incorporated
+("TI"), 12500 TI Boulevard, Dallas, Texas 75243.  The "Licensed Materials"
+subject to this Agreement include the software programs (in whole or in
+part), that accompany this Agreement and set forth in the applicable
+software manifest and which you access "on-line" and/or electronic
+documentation (in whole or in part) associated and provided with these
+software programs.  By installing, copying or otherwise using the Licensed
+Materials you agree to abide by the terms of this Agreement.  If you choose
+not to accept or agree with these terms, do not download or install the
+Licensed Materials.
+
+Note Regarding Possible Access to Open Source Software:  The Licensed
+Materials may be bundled with Open Source Software.  "Open Source Software"
+means any software licensed under terms requiring that (A) other software
+("Proprietary Software") incorporated, combined or distributed with such
+software or developed using such software: (i) be disclosed or distributed
+in source code form; or (ii) otherwise be licensed on terms inconsistent
+with the terms of this Agreement, including but not limited to permitting
+use of the Proprietary Software on or with devices other than TI Devices, or
+(B) require the owner of Proprietary Software to license any of its patents
+to users of the Open Source Software and/or Proprietary Software
+incorporated, combined or distributed with such Open Source Software or
+developed using such Open Source Software.
+
+You may gain access to Open Source Software, in which case such Open Source
+Software will be listed in the applicable software manifest (in whole or in
+part, the "Open Source Materials").  Your use of the Open Source Materials
+is subject to the separate licensing terms applicable to such Open Source
+Materials as specified in the applicable software manifest.  For
+clarification, this Agreement does not limit your rights under, or grant you
+rights that supersede, the license terms of any applicable Open Source
+Materials license agreement.  If any of the Open Source Materials have been
+provided to you in object code only, TI will provide to you or show you
+where can access the source code versions of such Open Source Materials if
+you contact TI at Texas Instruments Incorporated, 12500 TI Boulevard, Mail
+Station 8638, Dallas, Texas 75243, Attention: Contracts Manager.  You may
+terminate this Agreement in the event you choose not to accept or agree with
+the terms in any applicable Open Source Materials license agreement,
+provided that such termination occurs within five (5) calendar days of
+acceptance of this Agreement and you abide by all applicable license terms
+in this Agreement until such termination.
+
+1. License.
+
+a. Source Code License.  For the Licensed Materials provided in source code
+format, TI hereby grants to you a limited, non-exclusive license to
+reproduce, use, and create modified or derivative works of the Licensed
+Materials provided to you in source code format and to distribute an
+unlimited number of copies of such source code Licensed Materials, or any
+derivatives thereof, in any format.
+
+b.  Object Code License.  For the Licensed Materials provided in object code
+format, TI hereby grants to you a limited, non-exclusive license to
+reproduce and use the Licensed Materials provided to you in object code
+format and to distribute an unlimited number of object or executable copies
+of such object code Licensed Materials.
+
+2. Termination.  This Agreement is effective until terminated.  Without
+prejudice to any other rights, TI may terminate your right to use the
+Licensed Materials under this Agreement if you fail to comply with the terms
+of this Agreement.  In such event, you shall destroy all copies of the
+Licensed Materials, including all portions and derivatives thereof.
+
+3. Intellectual Property Rights.
+
+a. The Licensed Materials being provided to you hereunder are being made
+publicly available by TI, even though they contain copyrighted material of
+TI and its licensors, if applicable.   In no event may you alter, remove or
+destroy any copyright notice included in the Licensed Materials.  To the
+extent that any of the Licensed Materials are provided in binary or object
+code only, you may not unlock, decompile, reverse engineer, disassemble or
+otherwise translate such binary or object code to human-perceivable form.
+The source code of such reverse engineered code may contain TI trade secret
+and other proprietary information. TI reserves all rights not specifically
+granted under this Agreement.
+
+b. Certain Licensed Materials may (i) require patent licenses from third
+parties claiming patent rights covering implementation of the Licensed
+Materials or (ii) be based on industry recognized standards or software
+programs published by industry recognized standards bodies and certain third
+parties may claim to own patents or copyrights that cover implementation of
+those standards.  You acknowledge and agree that this Agreement does not
+convey a license to any such third party patents and copyrights.
+
+c. YOU ACKNOWLEDGE AND AGREE THAT TI SHALL NOT BE LIABLE FOR AND SHALL NOT
+DEFEND OR INDEMNIFY YOU AGAINST ANY THIRD PARTY INFRINGEMENT CLAIM THAT
+RELATES TO OR IS BASED ON YOUR MANUFACTURE, USE, OR DISTRIBUTION OF THE
+LICENSED MATERIALS OR YOUR MANUFACTURE, USE, OFFER FOR SALE, SALE,
+IMPORTATION OR DISTRIBUTION OF YOUR PRODUCTS THAT INCLUDE OR INCORPORATE THE
+LICENSED MATERIALS.
+
+d. You acknowledge and agree that you are responsible for any fees or
+royalties that may be payable to any third party based on such third party's
+interests in the Licensed Materials described in Section 3(b) above (the
+"Third Party Payment Obligations").  You agree to indemnify TI against any
+Third Party Payment Obligations and will defend any claim, suit or
+proceeding brought against TI insofar as such claim, suit or proceeding is
+based on your failure to pay any Third Party Payment Obligations.
+
+4. Warranties and Limitations.  THE LICENSED MATERIALS ARE PROVIDED "AS IS".
+TI AND ITS LICENSORS MAKE NO WARRANTY OR REPRESENTATION, EXPRESS, IMPLIED OR
+STATUTORY, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR
+A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS OF
+RESPONSES, RESULTS AND LACK OF NEGLIGENCE.  TI DISCLAIMS ANY WARRANTY OF
+TITLE, QUIET ENJOYMENT, QUIET POSESSION, AND NON-INFRINGEMENT OF ANY THIRD
+PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE LICENSED MATERIALS OR
+USE OF THOSE MATERIALS.
+
+YOU ACKNOWLEDGE AND AGREE THAT THE LICENSED MATERIALS MAY NOT BE INTENDED
+FOR PRODUCTION APPLICATIONS AND MAY CONTAIN IRREGULARITIES AND DEFECTS NOT
+FOUND IN PRODUCTION SOFTWARE.  FURTHERMORE, YOU ACKNOWLEDGE AND AGREE THAT
+THE LICENSED MATERIALS HAVE NOT BEEN TESTED OR CERTIFIED BY ANY GOVERNMENT
+AGENCY OR INDUSTRY REGULATORY ORGANIZATION OR ANY OTHER THIRD PARTY
+ORGANIZATION.  YOU AGREE THAT PRIOR TO USING, INCORPORATING OR DISTRIBUTING
+THE LICENSED MATERIALS IN OR WITH ANY COMMERCIAL PRODUCT THAT YOU WILL
+THOROUGHLY TEST THE PRODUCT AND THE FUNCTIONALITY OF THE LICENSED MATERIALS
+IN OR WITH THAT PRODUCT AND BE SOLELY RESPONSIBLE FOR ANY PROBLEMS OR
+FAILURES.
+
+IN NO EVENT SHALL TI OR ITS LICENSORS BE LIABLE FOR ANY SPECIAL, INDIRECT,
+INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED ON ANY THEORY
+OF LIABILITY, ARISING IN ANY WAY OUT OF THIS AGREEMENT, OR YOUR USE OF THE
+LICENSED MATERIALS, WHETHER OR NOT TI HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.  EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
+REMOVAL OR REINSTALLATION, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OR
+CORRUPTION OF DATA, LOSS OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR
+LOSS OF USE OR INTERRUPTION OF BUSINESS OR ANY OTHER ECONOMIC LOSS.  IN NO
+EVENT WILL TI'S AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
+YOUR USE OF THE LICENSED MATERIALS EXCEED FIVE HUNDRED U.S. DOLLARS
+(US$500).
+
+Because some jurisdictions do not allow the exclusion or limitation of
+incidental or consequential damages or limitation on how long an implied
+warranty lasts, the above limitations or exclusions may not apply to you.
+
+5. Export Control.  The Licensed Materials may be subject to the export or
+import regulations of certain countries. You agree to comply with all such
+regulations and acknowledge that you have the responsibility to obtain any
+licenses or other authorizations that may be required to export, re-export
+or import the Licensed Materials.
+
+6. Governing Law, Jurisdiction and Severability.  This Agreement will be
+governed by and interpreted in accordance with the laws of the State of
+Texas, without reference to conflict of laws principles.  If for any reason
+a court of competent jurisdiction finds any provision of the Agreement to be
+unenforceable, that provision will be enforced to the maximum extent
+possible to effectuate the intent of the parties and the remainder of the
+Agreement shall continue in full force and effect. This Agreement shall not
+be governed by the United Nations Convention on Contracts for the
+International Sale of Goods, or by the Uniform Computer Information
+Transactions Act (UCITA). The parties agree that non-exclusive jurisdiction
+for any dispute arising out of or relating to this Agreement lies within the
+courts located in the State of Texas.  Notwithstanding the foregoing, any
+judgment may be enforced in any United States or foreign court, and either
+party may seek injunctive relief in any United States or foreign court.
+Failure by TI to enforce any provision of this Agreement shall not be deemed
+a waiver of future enforcement of that or any other provision in this
+Agreement or any other agreement that may be in place between the parties.
+
+7. PRC Provisions.  If you are located in the People's Republic of China
+("PRC") or if the Licensed Materials will be sent to the PRC, the following
+provisions shall apply:
+
+a. Registration Requirements.  You shall be solely responsible for
+performing all acts and obtaining all approvals that may be required in
+connection with this Agreement by the government of the PRC, including but
+not limited to registering pursuant to, and otherwise complying with, the
+PRC Measures on the Administration of Software Products, Management
+Regulations on Technology Import-Export, and Technology Import and Export
+Contract Registration Management Rules.  Upon receipt of such approvals from
+the government authorities, you shall forward evidence of all such approvals
+to TI for its records.  In the event that you fail to obtain any such
+approval or registration, you shall be solely responsible for any and all
+losses, damages or costs resulting therefrom, and shall indemnify TI for all
+such losses, damages or costs.
+
+b. Governing Language.  This Agreement is written and executed in the
+English language.  If a translation of this Agreement is required for any
+purpose, including but not limited to registration of the Agreement pursuant
+to any governmental laws, regulations or rules, you shall be solely
+responsible for creating such translation.  Any translation of this
+Agreement into a language other than English is intended solely in order to
+comply with such laws or for reference purposes, and the English language
+version shall be authoritative and controlling.
+
+8. Entire Agreement.  This is the entire agreement between you and TI and
+supersedes any prior agreement between the parties related to the subject
+matter of this Agreement. No amendment or modification of this Agreement
+will be effective unless in writing and signed by a duly authorized
+representative of TI.  You hereby warrant and represent that you have
+obtained all authorizations and other applicable consents required
+empowering you to enter into this Agreement.

recipes-bsp/abefw/abefw_1.0.14.bb

@@ -0,0 +1,23 @@
+SUMMARY = "Firmware for OMAP4 and OMAP5 ABE"
+HOMEPAGE = "http://git.ti.com"
+LICENSE = "BSD | GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=923db086ed9463ab3215b24d87e05ec5"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+COMPATIBLE_MACHINE = "pandaboard|omap5-evm"
+
+SRC_URI = "git://git.ti.com/glsdk/abefw-omap4plus.git;protocol=git"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "ceccc0332264e39bdc51e54f80ea7256a3886c58"
+
+PR = "r0"
+
+do_install() {
+        mkdir -p ${D}/lib/firmware
+        cp ${S}/firmware/omap4_abe_new ${D}/lib/firmware/
+}
+
+FILES_${PN} += "/lib/firmware/omap4_abe_new"

recipes-bsp/aif2-lld/aif2-lld-test_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "TI Antenna Interface peripheral module low level driver test binaries"
+
+DEPENDS = "common-csl-ip aif2-lld qmss-lld cppi-lld"
+
+include aif2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} AIF2_SRC_DIR=${WORKDIR}/git"
+
+do_compile () {
+    oe_runmake clean DEVICE=k2hk
+    oe_runmake tests DEVICE=k2hk
+}
+
+do_install () {
+    oe_runmake installbin DEVICE=k2hk AIF2_SRC_DIR=${WORKDIR}/git INSTALL_BIN_BASE_DIR=${D}/${bindir}
+}

recipes-bsp/aif2-lld/aif2-lld.inc

@@ -0,0 +1,22 @@
+LICENSE = "BSD-3-Clause"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+
+AIF2_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/aif2-lld.git"
+AIF2_LLD_GIT_PROTOCOL = "git"
+AIF2_LLD_GIT_BRANCH = "master"
+AIF2_LLD_GIT_DESTSUFFIX = "git/ti/drv/aif2"
+
+# The following commit correspond to DEV.AIF2LLD.01.02.00.00A
+AIF2_LLD_SRCREV = "7f394ec9975cd4cef982b11763c882c4c763ddce"
+
+BRANCH = "${AIF2_LLD_GIT_BRANCH}"
+SRC_URI = "${AIF2_LLD_GIT_URI};destsuffix=${AIF2_LLD_GIT_DESTSUFFIX};protocol=${AIF2_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${AIF2_LLD_SRCREV}"
+
+PV = "1.2.0.0"
+INC_PR = "r1"
+
+COMPATIBLE_MACHINE = "k2hk-evm"
+
+S = "${WORKDIR}/${AIF2_LLD_GIT_DESTSUFFIX}"

recipes-bsp/aif2-lld/aif2-lld_git.bb

@@ -0,0 +1,17 @@
+DESCRIPTION = "Antenna Interface low level driver"
+
+DEPENDS = "common-csl-ip qmss-lld cppi-lld"
+
+include aif2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+    oe_runmake lib DEVICE=k2hk
+}
+
+do_install () {
+    oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/boot-monitor/boot-monitor_git.bb

@@ -0,0 +1,46 @@
+DESCRIPTION = "Boot Monitor - TI ARM Boot monitor code"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
+
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ks2-boot-monitor.git;protocol=git;branch=${BRANCH}"
+
+PV = "3.0+git${SRCPV}"
+PR = "r1"
+
+BRANCH = "master"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "035329caed63abe7193c855ad5d561ae783b19d7"
+
+BOOT_MONITOR_IMAGE  ?= "skern-${BOOT_MONITOR_MAKE_TARGET}.bin"
+
+FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}" LD="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}""
+
+FILES_${PN} = "/boot"
+
+inherit deploy
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake image_${BOOT_MONITOR_MAKE_TARGET}
+}
+
+do_install () {
+	install -d ${D}/boot
+	install -m 0644 ${S}/${BOOT_MONITOR_IMAGE} ${D}/boot/
+}
+
+do_deploy () {
+	install -d ${DEPLOYDIR}
+	install -m 0644 ${S}/${BOOT_MONITOR_IMAGE} ${DEPLOYDIR}/
+}
+
+addtask deploy before do_build after do_compile

recipes-bsp/cm3-pm-firmware/am33x-cm3_git.bb

@@ -0,0 +1,29 @@
+DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
+
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
+
+PV = "1.9.0"
+PR = "r1"
+PE = "1"
+
+SRCREV = "d85e6a17da1025adac9ab7f97dd7aa2a58c517ce"
+BRANCH ?= "ti-v3.14.y"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ti-amx3-cm3-pm-firmware.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+do_compile() {
+	make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"
+}
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware
+	install -m 0644 bin/am335x-pm-firmware.elf ${D}${base_libdir}/firmware/
+	install -m 0644 bin/*-scale-data.bin ${D}${base_libdir}/firmware/
+}
+
+FILES_${PN} += "${base_libdir}/firmware"

recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb

@@ -0,0 +1,28 @@
+DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
+
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
+
+PV = "1.9.1"
+PR = "r2"
+
+SRCREV = "730f0695ca2dda65abcff5763e8f108517bc0d43"
+BRANCH ?= "ti-v4.1.y"
+
+SRC_URI = "git://git.ti.com/processor-firmware/ti-amx3-cm3-pm-firmware.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+do_compile() {
+	make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"
+}
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware
+	install -m 0644 bin/am335x-pm-firmware.elf ${D}${base_libdir}/firmware/
+	install -m 0644 bin/*-scale-data.bin ${D}${base_libdir}/firmware/
+}
+
+FILES_${PN} += "${base_libdir}/firmware"

recipes-bsp/cmem/cmem-mod_git.bb

@@ -0,0 +1,14 @@
+DESCRIPTION = "Kernel module for contiguous memory allocation from userspace"
+
+include cmem.inc
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "b"
+PR = "${MACHINE_KERNEL_PR}"
+
+inherit module
+
+EXTRA_OEMAKE += '-f lu.mak KERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" TOOLCHAIN_PREFIX="${TOOLCHAIN_PREFIX}" EXEC_DIR="${D}/lib/modules/${KERNEL_VERSION}/extra"'
+MAKE_TARGETS = "module"
+
+KERNEL_MODULE_AUTOLOAD += "cmemk"

recipes-bsp/cmem/cmem.inc

@@ -0,0 +1,14 @@
+HOMEPAGE = "http://processors.wiki.ti.com/index.php/Category:CMEM"
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://include/ti/cmem.h;beginline=1;endline=30;md5=9b745e2765a6ba8a636c91aed4b02ac1"
+
+BRANCH ?= "lu-next"
+# This corresponds to version 4.10.02.03
+SRCREV = "00241c45f810c8b8e4f5ac66c3323fec8e43b621"
+
+PV = "4.10.02.04+git${SRCPV}"
+
+SRC_URI = "git://git.ti.com/ipc/ludev.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"

recipes-bsp/cmem/cmem_git.bb

@@ -0,0 +1,13 @@
+DESCRIPTION = "The cmem component supports contiguous memory allocation from userspace"
+
+include cmem.inc
+
+RDEPENDS_${PN} = "cmem-mod"
+
+PR = "r0"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/*"
+
+inherit autotools

recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb

@@ -0,0 +1,36 @@
+require common-csl-ip.inc
+
+PR = "${INC_PR}.0"
+
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+DEPENDS = "ti-xdctools ti-cgt6x-native ti-sysbios"
+
+CSL_GIT_DESTSUFFIX = "git/ti/csl"
+
+export C6X_GEN_INSTALL_PATH="${STAGING_DIR_NATIVE}/usr"
+export XDCCGROOT="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+export XDCPATH="${XDCCGROOT}/include;${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages"
+
+do_configure() {
+    sed -i "s/\ \"\.\\\\\\\\\"\ +//" src/Module.xs
+    find -name "*.xs" -exec sed -i "s/ofd6x\.exe/ofd6x/" {} \;
+    find -name "*.xs" -exec sed -i "s/sectti\.exe/sectti/" {} \;
+    find -name "*.xs" -exec sed -i "/\.chm/d" {} \;
+    find -name "*.xs" -exec sed -i "s/pasm\_dos/pasm\_linux/" {} \;
+}
+
+do_compile() {
+    ${XDC_INSTALL_DIR}/xdc .make
+    ${XDC_INSTALL_DIR}/xdc clean
+    ${XDC_INSTALL_DIR}/xdc release
+}
+
+do_install () {
+    install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages
+    find -name "*.tar" -exec tar xf {} -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages \;
+}
+
+ALLOW_EMPTY_${PN} = "1"
+FILES_${PN}-dev += "${PDK_INSTALL_DIR_RECIPE}/packages"

recipes-bsp/common-csl-ip/common-csl-ip.inc

@@ -0,0 +1,26 @@
+DESCRIPTION = "Chip support library low level interface"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5857833e20836213677fac33f9aded21"
+
+COMPATIBLE_MACHINE = "keystone|dra7xx"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+INC_PR = "r4"
+
+CSL_GIT_URI = "git://git.ti.com/keystone-rtos/common-csl-ip.git"
+CSL_GIT_PROTOCOL ="git"
+CSL_GIT_BRANCH = "master"
+CSL_GIT_BRANCH_dra7xx = "releases/PROCESSOR-SDK.01.00.00"
+CSL_GIT_DESTSUFFIX = "git"
+
+# commit ID corresponds to DEV.CSL_KEYSTONE2.02.01.01.00A
+CSL_SRCREV = "17bb083f0d5ed4ad6f38c991210a6a8e9aaf9c56"
+
+# commit ID corresponds to PROCESSOR-SDK-ALPHA-1
+CSL_SRCREV_dra7xx = "37c5311ddf289f83b1432a9422816722d264bf55"
+
+BRANCH="${CSL_GIT_BRANCH}"
+SRC_URI = "${CSL_GIT_URI};protocol=${CSL_GIT_PROTOCOL};branch=${BRANCH};destsuffix=${CSL_GIT_DESTSUFFIX}"
+SRCREV = "${CSL_SRCREV}"
+
+S = "${WORKDIR}/${CSL_GIT_DESTSUFFIX}"

recipes-bsp/common-csl-ip/common-csl-ip_git.bb

@@ -0,0 +1,11 @@
+require common-csl-ip.inc
+
+PR = "${INC_PR}.0"
+
+ALLOW_EMPTY_${PN} = "1"
+
+do_install () {
+    install -d ${D}${includedir}/ti/csl
+    find . -name "*.h" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
+    find ./src/ip/serdes_sb/V0 -name "*.c" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
+}

recipes-bsp/cppi-lld/cppi-lld-test_git.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "TI CPPI low level driver unit test and example binaries"
+DEPENDS = "common-csl-ip rm-lld cppi-lld qmss-lld"
+
+include cppi-lld.inc
+
+PR = "${INC_PR}.0"
+
+CHOICELIST = "yes no"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+do
+	make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/cppi-lld/cppi-lld.inc

@@ -0,0 +1,27 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/cppi/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
+
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+CPPI_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/cppi-lld.git"
+CPPI_LLD_GIT_PROTOCOL = "git"
+CPPI_LLD_GIT_BRANCH = "master"
+CPPI_LLD_GIT_DESTSUFFIX = "git/ti/drv/cppi"
+
+# Below Commit ID corresponds to "DEV.CPPI_LLD.02.01.00.10"
+CPPI_LLD_SRCREV = "97c537fa544a78e83512db3499a49d0bd86fad32"
+
+BRANCH = "${CPPI_LLD_GIT_BRANCH}"
+SRC_URI = "${CPPI_LLD_GIT_URI};destsuffix=${CPPI_LLD_GIT_DESTSUFFIX};protocol=${CPPI_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+
+SRCREV = "${CPPI_LLD_SRCREV}"
+PV = "02.01.00.10"
+INC_PR = "r3"
+
+DEVICELIST = "k2h k2k k2l k2e"
+DEVICELIST_k2hk-evm = "k2h k2k"
+DEVICELIST_k2l-evm  = "k2l"
+DEVICELIST_k2e-evm  = "k2e"
+
+S = "${WORKDIR}/${CPPI_LLD_GIT_DESTSUFFIX}"

recipes-bsp/cppi-lld/cppi-lld_git.bb

@@ -0,0 +1,31 @@
+DESCRIPTION = "TI CPPI Module low level driver"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld"
+
+include cppi-lld.inc
+
+PR = "${INC_PR}.1"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR}
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR}  DEVICE="${device}"
+	done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+
+#   Set the generic device library symbolic link to default k2h
+    cd ${D}${libdir}
+
+    # Link only the first device in the list
+    for device in ${DEVICELIST}
+    do
+        ln -sf libcppi_${device}.so.1.0.0 libcppi_device.so.1
+        break
+    done
+    ln -sf libcppi_device.so.1 libcppi_device.so
+}

recipes-bsp/cuia/cuia_1.0.0.13.bb

@@ -0,0 +1,25 @@
+DESCRIPTION = "TI Unified Instrumentation Architecture in C (cUIA)"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://cuia_${CUIA_PV}_manifest.html;md5=0eea94e3bb94de4ddee77653eba1c7c5"
+
+CUIA_PV = "1_00_00_13"
+CUIA_PVExtra = ""
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/UIA/SCMCSDK/cuia_${CUIA_PV}${CUIA_PVExtra}.tar.gz;name=cuia"
+SRC_URI[cuia.md5sum] = "ef53989ac70c191841cd656cdc8770be"
+SRC_URI[cuia.sha256sum] = "f16d138a9146fdc7d52cba77bd30596da65835f6ffe4092baf2b33d1c1a4fb0d"
+
+S = "${WORKDIR}/cuia_${CUIA_PV}${CUIA_PVExtra}"
+
+CLEANBROKEN = "1"
+
+do_compile () {
+	cd ${S}
+	oe_runmake clean
+	oe_runmake all
+}
+
+do_install() {
+	cd ${S}
+	oe_runmake DESTDIR=${D} libdir=${libdir} includedir=${includedir} install
+}

recipes-bsp/dfe-lld/dfe-lld-test_git.bb

@@ -0,0 +1,20 @@
+DESCRIPTION = "TI Digital Radio Front End lld test application"
+
+DEPENDS = "common-csl-ip dfe-lld iqn2-lld"
+
+include dfe-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} DFE_SRC_DIR=${S}"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	oe_runmake clean DEVICE=k2l
+	oe_runmake tests DEVICE=k2l
+	oe_runmake tests DEVICE=k2l USEDYNAMIC_LIB=yes
+}
+
+do_install () {
+	oe_runmake installbin INSTALL_BIN_BASE_DIR=${D}/${bindir}
+}

recipes-bsp/dfe-lld/dfe-lld.inc

@@ -0,0 +1,22 @@
+LICENSE = "BSD-3-Clause"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=1f4217b705bf98762a302fd720649dcc"
+
+DFE_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/dfe-lld.git"
+DFE_LLD_GIT_PROTOCOL = "git"
+DFE_LLD_GIT_BRANCH = "master"
+DFE_LLD_GIT_DESTSUFFIX = "git/ti/drv/dfe"
+
+# The following commit correspond to DEV.DFE_LLD.01.00.00.05E
+DFE_LLD_SRCREV = "42e9df0108d208c92b9d2fee7e8b1b1ab62f4b69"
+
+BRANCH = "${DFE_LLD_GIT_BRANCH}"
+SRC_URI = "${DFE_LLD_GIT_URI};destsuffix=${DFE_LLD_GIT_DESTSUFFIX};protocol=${DFE_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${DFE_LLD_SRCREV}"
+
+PV = "1.0.0.5"
+INC_PR = "r1"
+
+COMPATIBLE_MACHINE = "k2l-evm"
+
+S = "${WORKDIR}/${DFE_LLD_GIT_DESTSUFFIX}"

recipes-bsp/dfe-lld/dfe-lld_git.bb

@@ -0,0 +1,17 @@
+DESCRIPTION = "Digital Radio Front End low level driver"
+
+DEPENDS = "common-csl-ip"
+
+include dfe-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	oe_runmake lib DEVICE=k2l
+}
+
+do_install () {
+	oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/dspdce-fw/dspdce-fw_git.bb

@@ -0,0 +1,62 @@
+DESCRIPTION = "Firmware for DSP for an example application called copycodectest"
+LICENSE = "TI-TSPA"
+LIC_FILES_CHKSUM = "file://src/ti/framework/dce/dce.c;startline=1;endline=31;md5=2c6e9aba6ed75f22b1a2b7544b1c809d"
+
+COMPATIBLE_MACHINE = "dra7xx"
+
+SRC_URI = "git://git.ti.com/glsdk/dspdce.git;protocol=git"
+
+SRCREV = "88705fd4584edd1289e4bb50658def936de90433"
+
+PV = "1.00.00.06"
+
+S = "${WORKDIR}/git"
+
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+PR = "r2"
+inherit update-alternatives
+
+DEPENDS = "ti-xdctools ti-sysbios ti-codec-engine ti-framework-components ti-xdais ti-ipc-rtos ti-osal ti-cgt6x-native"
+
+export HWVERSION = "ES10"
+export BIOSTOOLSROOT = "${STAGING_DIR_TARGET}/usr/share/ti"
+
+export XDCVERSION = "ti-xdctools-tree"
+export BIOSVERSION = "ti-sysbios-tree"
+export IPCVERSION = "ti-ipc-tree"
+export CEVERSION = "ti-codec-engine-tree"
+export FCVERSION = "ti-framework-components-tree"
+export XDAISVERSION = "ti-xdais-tree"
+export OSALVERSION = "ti-osal-tree"
+
+export IPCSRC = "${STAGING_DIR_TARGET}/usr/share/ti/ti-ipc-tree"
+export C66XCGTOOLSPATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+
+do_configure() {
+    cd ${S}
+    make unconfig
+    make vayu_config
+}
+
+do_compile() {
+    cd ${S}
+    make dspbin
+}
+
+TARGET = "dra7-dsp1-fw.xe66"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/dra7xx-c66x-dsp.xe66 ${D}${base_libdir}/firmware/${TARGET}.${BPN}
+}
+
+ALTERNATIVE_${PN} = "dra7-dsp1-fw.xe66"
+ALTERNATIVE_LINK_NAME[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}"
+ALTERNATIVE_TARGET[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}.${BPN}"
+ALTERNATIVE_PRIORITY = "10"
+
+INSANE_SKIP_${PN} = "arch"
+
+FILES_${PN} += "${base_libdir}/firmware/*"

recipes-bsp/dsptop/debugss-module-drv_git.bb

@@ -0,0 +1,23 @@
+DESCRIPTION = "Debug Sub-System (DebugSS) driver for Keystone and DRA7xx devices"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3"
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "b"
+PR = "${MACHINE_KERNEL_PR}"
+PV_append = "+git${SRCPV}"
+
+S = "${WORKDIR}/git/debugss_module/debugss-mod"
+
+inherit module
+
+PLATFORM = ""
+PLATFORM_dra7xx = "DRA7xx_PLATFORM"
+PLATFORM_keystone = "KEYSTONE_PLATFORM"
+
+EXTRA_OEMAKE = "'PLATFORM=${PLATFORM}' KVERSION=${KERNEL_VERSION} KERNEL_SRC=${STAGING_KERNEL_DIR}"
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+include dsptop.inc

recipes-bsp/dsptop/dsptop.inc

@@ -0,0 +1,8 @@
+# This corresponds to version 1.2.0
+SRCREV = "9893486936626e2d3de721f429a67fcac8a68151"
+PV = "1.2.0"
+INC_PR = "r0"
+
+SRC_URI = "git://git.ti.com/sdo-emu/dsptop.git;protocol=git;branch=${BRANCH}"
+
+BRANCH = "master"

recipes-bsp/dsptop/dsptop_git.bb

@@ -0,0 +1,28 @@
+DESCRIPTION = "TI dsptop utility."
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://debian/copyright;md5=309825aa8f5edfcf2c44912ac094b979"
+
+DEPENDS = "libulm ncurses"
+
+PR = "${INC_PR}.0"
+
+S = "${WORKDIR}/git/dsptop"
+
+DEVICE = ""
+DEVICE_dra7xx = "DRA7xx"
+DEVICE_keystone = "C66AK2Hxx"
+
+EXTRA_OEMAKE = "release DEVICE=${DEVICE} CROSS_COMPILE=${TARGET_PREFIX}"
+
+do_install() {
+    oe_runmake install DESTDIR=${D}
+}
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+RDEPENDS_${PN} = "debugss-module-drv"
+
+include dsptop.inc
+
+PARALLEL_MAKE = ""

recipes-bsp/dsptop/libulm_git.bb

@@ -0,0 +1,42 @@
+DESCRIPTION = "TI dsptop utility."
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://../debian/copyright;md5=309825aa8f5edfcf2c44912ac094b979"
+
+DEPENDS = "ti-cgt6x-native"
+PR = "${INC_PR}.0"
+
+S = "${WORKDIR}/git/dsptop/ulm"
+
+DEVICE=""
+DEVICE_dra7xx = "DRA7xx"
+DEVICE_keystone = "C66AK2Hxx"
+
+EXTRA_OEMAKE = "release DEVICE=${DEVICE} CROSS_COMPILE=${TARGET_PREFIX}"
+
+do_compile() {
+    oe_runmake arm XPORT_ONLY
+    oe_runmake dsp C6X_C_DIR=${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x/include
+}
+
+do_install() {
+    install -d ${D}${includedir}
+    install -d ${D}${libdir}
+    install -d ${D}${datadir}/ti/ulm
+    cp -f tiulm.h ${D}${includedir}
+    cp -f release/libtiulm.a ${D}${libdir}
+    cp -f tiulm.h ${D}${datadir}/ti/ulm
+    cp -f release/libtiulm.ae66 ${D}${datadir}/ti/ulm
+}
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN}-dev += "\
+    ${datadir}/ti/ulm \
+"
+
+include dsptop.inc
+
+ALLOW_EMPTY_${PN} = "1"
+
+PARALLEL_MAKE= ""

recipes-bsp/edma3-lld/edma3-lld-rtos_git.bb

@@ -0,0 +1,76 @@
+require edma3-lld.inc
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+PR = "${INC_PR}.0"
+
+DEPENDS = "ti-cgt6x-native ti-sysbios ti-xdctools"
+
+COMPATIBLE_MACHINE = "dra7xx|keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+PLATFORMLIST = ""
+PLATFORMLIST_keystone = " \
+        tci6636k2h-evm \
+        tci6638k2k-evm \
+        tci6630k2l-evm \
+        c66ak2e-evm \
+"
+
+PLATFORMLIST_dra7xx = " \
+        tda2xx-evm \
+        dra72x-evm \
+        am571x-evm \
+        am572x-evm \
+"
+
+S = "${WORKDIR}/git"
+
+PARALLEL_MAKE = ""
+
+export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr"
+export XDCCGROOT = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
+export CGTOOLS = "${XDCCGROOT}"
+export CGTOOLS_ELF = "${XDCCGROOT}"
+export CODEGEN_PATH_DSP = "${XDCCGROOT}"
+export CODEGEN_PATH_DSPELF = "${XDCCGROOT}"
+export TMS470_CGTOOLS = "${XDCCGROOT}"
+export UTILS_INSTALL_DIR = "${XDC_INSTALL_DIR}"
+export XDCPATH = "${XDCCGROOT}/include;${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages"
+export PATH := "${XDC_INSTALL_DIR}:${PATH}"
+export ROOTDIR="${S}"
+export INTERNAL_SW_ROOT="${S}"
+export CROSSCC="${TARGET_PREFIX}gcc"
+export CROSSAR="${TARGET_PREFIX}ar"
+export CROSSLNK="${TARGET_PREFIX}gcc"
+
+
+EXTRA_OEMAKE += " -C ${S}/packages TARGET=66 FORMAT=ELF"
+
+do_configure () {
+    sed -i -e "s|^UTILS_INSTALL_DIR =.*$|UTILS_INSTALL_DIR = ${XDC_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^bios_PATH =.*$|bios_PATH = ${SYSBIOS_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^xdc_PATH =.*$|xdc_PATH = ${XDC_INSTALL_DIR}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_DSP =.*$|CODEGEN_PATH_DSP = ${XDCCGROOT}|g" ${S}/makerules/env.mk
+    sed -i -e "s|^CODEGEN_PATH_DSPELF =.*$|CODEGEN_PATH_DSPELF = ${XDCCGROOT}|g" ${S}/makerules/env.mk
+
+    cd ${S}/packages
+    ${XDC_INSTALL_DIR}/xdc .interfaces -PR .
+}
+
+do_compile () {
+    for p in ${PLATFORMLIST}
+    do
+        oe_runmake PLATFORM=${p}
+    done
+}
+
+do_install () {
+    install -d ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE}
+    cp -pPrf ${S}/* ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE}
+}
+
+INSANE_SKIP_${PN}-dev = "arch"
+
+ALLOW_EMPTY_${PN} = "1"
+FILES_${PN}-dev += "${EDMA3_LLD_INSTALL_DIR_RECIPE}"

recipes-bsp/edma3-lld/edma3-lld.inc

@@ -0,0 +1,17 @@
+DESCRIPTION = "TI EDMA3 low level driver and test code"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+
+EDMA3_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/edma3_lld.git"
+EDMA3_LLD_GIT_PROTOCOL = "git"
+EDMA3_LLD_GIT_BRANCH = "master"
+
+# The following commit corresponds to tag DEV_EDMA3_LLD_02_12_01_21_RC1
+EDMA3_LLD_SRCREV = "562cba36ccd53e89e6979e99a58374513b543f93"
+
+BRANCH = "${EDMA3_LLD_GIT_BRANCH}"
+SRC_URI = "${EDMA3_LLD_GIT_URI};protocol=${EDMA3_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${EDMA3_LLD_SRCREV}"
+
+PV = "2.12.01.21"
+INC_PR = "r2"

recipes-bsp/edma3-lld/edma3-lld_git.bb

@@ -0,0 +1,71 @@
+require edma3-lld.inc
+
+PR = "${INC_PR}.0"
+
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS = "common-csl-ip"
+
+PLATFORMLIST = "tci6636k2h-evm \
+	tci6638k2k-evm \
+	tci6630k2l-evm \
+	c66ak2e-evm \
+	"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/*"
+
+S = "${WORKDIR}/git"
+
+do_compile () {
+	cd ${S}/packages
+	for platform in ${PLATFORMLIST}
+	do
+		ROOTDIR=${S} CROSSCC="${TARGET_PREFIX}gcc" CROSSAR="${TARGET_PREFIX}ar" \
+		CROSSLNK="${TARGET_PREFIX}gcc" INTERNAL_SW_ROOT="${S}" make \
+		PLATFORM="$platform" TARGET=a15 TOOLCHAIN_a15=GCC FORMAT=ELF \
+		SONAME=libedma3.so all
+	done
+}
+
+do_install () {
+	install -d ${D}/${libdir}
+
+	# Static Libraries
+	cp ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/edma3_lld_drv.aa15fg \
+		${D}/${libdir}/libedma3.a
+	cp ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/edma3_lld_rm.aa15fg \
+		${D}/${libdir}/libedma3rm.a
+
+	# Shared Libraries
+	cp -a ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/libedma* ${D}/${libdir}
+	cp -a ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/libedma* ${D}/${libdir}
+
+	# Copy Headers
+	install -d ${D}/${includedir}/ti/sdo/edma3/drv/
+	install -d ${D}/${includedir}/ti/sdo/edma3/rm
+	cp ${S}/packages/ti/sdo/edma3/drv/*.h ${D}/${includedir}/ti/sdo/edma3/drv/
+	cp ${S}/packages/ti/sdo/edma3/rm/*.h ${D}/${includedir}/ti/sdo/edma3/rm/
+
+	# Copy Sample Config
+	install -d ${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/evmTCI6636K2HSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/evmTCI6638K2KSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/evmTCI6630K2LSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmC66AK2E/evmC66AK2ESample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+
+	install -d ${D}/${bindir}
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/bin/tci6636k2h-evm/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/bin/tci6638k2k-evm/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/bin/tci6630k2l-evm/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmC66AK2E/bin/c66ak2e-evm/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg
+}

recipes-bsp/formfactor/formfactor_0.0.bbappend

@@ -1,3 +1 @@
-THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}"
-FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:"
-
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-bsp/hplib/hplib-mod_git.bb

@@ -0,0 +1,20 @@
+DESCRIPTION = "TI High Performance Library kernel module"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/module/COPYING.txt;md5=c1c4d3453cddc5b7f0ce84a277e66779"
+
+DEPENDS = "hplib"
+
+include hplib.inc
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+S ="${WORKDIR}/git/ti/runtime/hplib/module"
+EXTRA_OEMAKE = "KDIR=${STAGING_KERNEL_DIR} PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+inherit module
+
+do_install () {
+	oe_runmake install INSTALL_MOD_PATH="${D}"
+}

recipes-bsp/hplib/hplib-test_git.bb

@@ -0,0 +1,32 @@
+DESCRIPTION = "TI High performance library test binaries"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/src/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+DEPENDS = "common-csl-ip qmss-lld sa-lld pktlib hplib"
+
+include hplib.inc
+
+PR = "${INC_PR}.0"
+
+CHOICELIST = "yes no"
+
+S = "${WORKDIR}/git/ti/runtime/hplib"
+
+EXTRA_OEMAKE += '-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}'
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			oe_runmake tests HPLIB_SRC_DIR=${S} USEDYNAMIC_LIB=$choice DEVICE="$device"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		oe_runmake installbin INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} DEVICE="$device"
+	done
+}

recipes-bsp/hplib/hplib.inc

@@ -0,0 +1,20 @@
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEVICELIST_k2hk-evm = "k2h k2k"
+DEVICELIST_k2l-evm  = "k2l"
+DEVICELIST_k2e-evm  = "k2e"
+
+HPLIB_GIT_URI = "git://git.ti.com/keystone-rtos/hplib.git"
+HPLIB_GIT_PROTOCOL = "git"
+HPLIB_GIT_BRANCH = "master"
+
+# Below Commit ID corresponds to "DEV.HPLIB.01.01.00.06"
+HPLIB_SRCREV = "1cbe6a41926c131d9cab63b40d43807c6e56e2fd"
+
+BRANCH = "${HPLIB_GIT_BRANCH}"
+SRC_URI = "${HPLIB_GIT_URI};protocol=${HPLIB_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${HPLIB_SRCREV}"
+
+PV = "01.01.00.06+git${SRCPV}"
+INC_PR = "r1"

recipes-bsp/hplib/hplib_git.bb

@@ -0,0 +1,33 @@
+DESCRIPTION = "TI High performance libraries"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/runtime/hplib/src/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld sa-lld pktlib"
+RDEPENDS_${PN} = "hplib-mod"
+
+include hplib.inc
+
+PR = "${INC_PR}.0"
+
+CHOICELIST = "yes no"
+
+S = "${WORKDIR}/git/ti/runtime/hplib"
+
+EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			oe_runmake lib HPLIB_SRC_DIR=${S} USEDYNAMIC_LIB=$choice DEVICE="$device"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		oe_runmake install INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} DEVICE="$device"
+	done
+}

recipes-bsp/hyplnk-lld/hyplnk-lld-test_git.bb

@@ -0,0 +1,26 @@
+include hyplnk-lld.inc
+
+PR = "${INC_PR}.0"
+
+DEPENDS = "common-csl-ip hyplnk-lld"
+
+do_compile () {
+	make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		HYPLNK_SRC_DIR="${S}"
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 tests examples \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+			DEVICE="$device" HYPLNK_SRC_DIR="${S}"
+	done
+}
+
+do_install () {
+    for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" DEVICE="$device" \
+			HYPLNK_SRC_DIR="${S}" \
+			INSTALL_BIN_BASE_DIR="${D}/${bindir}"
+	done
+}

recipes-bsp/hyplnk-lld/hyplnk-lld.inc

@@ -0,0 +1,29 @@
+DESCRIPTION = "TI Hyperlink Low Level Driver"
+LICENSE = "BSD-3-Clause"
+
+COMPATIBLE_MACHINE = "k2hk-evm|k2e-evm"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+LLDNAME="hyplnk"
+
+LIC_FILES_CHKSUM = "file://${WORKDIR}/${HYPLNK_GIT_DESTSUFFIX}/COPYING.txt;md5=623325cc19e613a4e770fbb749922592"
+
+HYPLNK_GIT_URI = "git://git.ti.com/keystone-rtos/hyplnk-lld.git"
+HYPLNK_GIT_PROTOCOL = "git"
+HYPLNK_GIT_BRANCH = "master"
+HYPLNK_GIT_DESTSUFFIX = "git/ti/drv/${LLDNAME}"
+
+# Following commit corresponds to tag DEV.HYPLNK_LLD.02.01.00.05
+HYPLNK_SRCREV = "ea2a634578626deaa69608a189d5d7e84e5b7127"
+
+BRANCH="${HYPLNK_GIT_BRANCH}"
+SRC_URI = "${HYPLNK_GIT_URI};destsuffix=${HYPLNK_GIT_DESTSUFFIX};protocol=${HYPLNK_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${HYPLNK_SRCREV}"
+
+PV = "2.1.0.5"
+INC_PR = "r2"
+
+DEVICELIST_k2hk-evm = "k2h k2k"
+DEVICELIST_k2e-evm  = "k2e"
+
+S = "${WORKDIR}/${HYPLNK_GIT_DESTSUFFIX}"

recipes-bsp/hyplnk-lld/hyplnk-lld_git.bb

@@ -0,0 +1,32 @@
+include hyplnk-lld.inc
+
+PR = "${INC_PR}.1"
+
+DEPENDS = "common-csl-ip"
+
+do_compile () {
+	make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		HYPLNK_SRC_DIR="${S}"
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH="${STAGING_INCDIR}"\
+			DEVICE="$device" HYPLNK_SRC_DIR="${S}"
+	done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		INSTALL_INC_BASE_DIR="${D}/${includedir}" \
+		INSTALL_LIB_BASE_DIR="${D}${libdir}" HYPLNK_SRC_DIR="${S}"
+
+	# Set the generic device library symbolic link to default k2h
+	cd ${D}${libdir}
+
+	# Link only the first device in the list
+	for device in ${DEVICELIST}
+	do
+		ln -sf libhyplnk_${device}.so.1.0.0 libhyplnk_device.so.1
+		break
+	done
+	ln -sf libhyplnk_device.so.1 libhyplnk_device.so
+}

recipes-bsp/ipumm-fw/ipumm-fw_3.00.04.02.bb

@@ -0,0 +1,35 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM = "file://MMIP-${PV}-Manifest.doc;md5=39a593dd8fc2a9654c74f679ed329c45"
+
+COMPATIBLE_MACHINE = "omap5-evm"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+RDEPENDS_${PN} = " libdce"
+
+SRC_URI = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/ipumm/3_00_04_02/exports/ipumm-${MACHINE}-${PV}.tar.gz;protocol=http"
+
+SRC_URI[md5sum] = "1572073ebd4f6d127c4e8cf47d270b6a"
+SRC_URI[sha256sum] = "2fdb469f19e3c9984854f5bc82444fca4d7da869f5e645da22ec0d5beaa5cc65"
+
+S = "${WORKDIR}/ipumm-${MACHINE}-${PV}"
+
+TARGET = "ducati-m3-core0.xem3"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/firmware/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"
+
+PR = "r4"

recipes-bsp/ipumm-fw/ipumm-fw_3.00.07.02.bb

@@ -0,0 +1,35 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM = "file://MMIP-${PV}-Manifest.doc;md5=caa45d993ac010abe2fd319f6613bc26"
+
+COMPATIBLE_MACHINE = "dra7xx"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+RDEPENDS_${PN} = " libdce"
+
+SRC_URI = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/ipumm/3_00_07_02/exports/ipumm-dra7xx-evm-${PV}.tar.gz;protocol=http"
+
+SRC_URI[md5sum] = "06aaf4f144d48ca16054e67e40cc7bc3"
+SRC_URI[sha256sum] = "0f07176e313a692a05fa6bfe9f7920b677b0924287121945c6e22b3f4408670c"
+
+S = "${WORKDIR}/ipumm-dra7xx-evm-${PV}"
+
+TARGET = "dra7-ipu2-fw.xem4"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/firmware/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"
+
+PR = "r5"

recipes-bsp/ipumm-fw/ipumm-fw_3.00.08.01.bb

@@ -0,0 +1,33 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM = "file://MMIP-${PV}-Manifest.doc;md5=57d49afcca8f1be47b1c4e79aa06b3ba"
+
+COMPATIBLE_MACHINE = "dra7xx"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+RDEPENDS_${PN} = "libdce"
+
+SRC_URI = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/ipumm/3_00_08_01/exports/ipumm-dra7xx-evm-${PV}.tar.gz;protocol=http"
+
+SRC_URI[md5sum] = "a1873333e7676ec1b7fcb18fb8b90696"
+SRC_URI[sha256sum] = "d583d827191a3772f496145cbf81747e10e7ed553d4653379576ac891019d7fb"
+
+S = "${WORKDIR}/ipumm-dra7xx-evm-${PV}"
+
+TARGET = "dra7-ipu2-fw.xem4"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/firmware/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"

recipes-bsp/ipumm-fw/ipumm-fw_3.00.08.02.bb

@@ -0,0 +1,35 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM = "file://MMIP-${PV}-Manifest.doc;md5=81f4b23808c36c9223523f43e35d291c"
+
+COMPATIBLE_MACHINE = "dra7xx"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+RDEPENDS_${PN} = " libdce"
+
+SRC_URI = "http://downloads.ti.com/infotainment/esd/jacinto6/glsdk/ipumm/3_00_08_02/exports/ipumm-dra7xx-evm-${PV}.tar.gz;protocol=http"
+
+SRC_URI[md5sum] = "53f47909c2e2575b188bba9ddc325437"
+SRC_URI[sha256sum] = "4ac7598bbbb5dd0cd6504906afe0e09d76ba612a3c326e45425e67535e5f2d09"
+
+S = "${WORKDIR}/ipumm-dra7xx-evm-${PV}"
+
+TARGET = "dra7-ipu2-fw.xem4"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/firmware/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"
+
+PR = "r2"

recipes-bsp/ipumm-fw/ipumm-fw_git.bb

@@ -0,0 +1,62 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM = "file://Texas_Instruments_ipumm_Manifest.pdf;md5=036f6300761559fbc5ce7d06e1ccea5a"
+
+COMPATIBLE_MACHINE = "dra7xx"
+
+RDEPENDS_${PN} = " libdce"
+
+SRC_URI = "git://git.ti.com/ivimm/ipumm.git;protocol=git"
+
+SRCREV = "486aa14f700783dbee63a0d81fb2e57d27a286e6"
+
+S = "${WORKDIR}/git"
+
+PV = "3.00.09.01"
+
+require recipes-ti/includes/ti-paths.inc
+require recipes-ti/includes/ti-staging.inc
+
+DEPENDS = "ti-xdctools ti-sysbios ti-codec-engine ti-framework-components ti-xdais ti-ccsv6-native ti-ipc-rtos"
+
+export HWVERSION="ES10"
+export BIOSTOOLSROOT="${STAGING_DIR_TARGET}/usr/share/ti"
+
+export XDCVERSION="ti-xdctools-tree"
+export BIOSVERSION="ti-sysbios-tree"
+export IPCVERSION="ti-ipc-tree"
+export CEVERSION="ti-codec-engine-tree"
+export FCVERSION="ti-framework-components-tree"
+export XDAISVERSION="ti-xdais-tree"
+
+export TMS470CGTOOLPATH="${M4_TOOLCHAIN_INSTALL_DIR}"
+export IPCSRC="${STAGING_DIR_TARGET}/usr/share/ti/ti-ipc-tree"
+
+do_configure() {
+    oe_runmake unconfig
+    oe_runmake vayu_smp_config
+}
+
+do_compile() {
+    oe_runmake
+}
+
+TARGET = "dra7-ipu2-fw.xem4"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"
+
+PR = "r2"

recipes-bsp/iqn2-lld/iqn2-lld-test_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "TI IQN2 peripheral module low level driver test binaries"
+
+DEPENDS = "common-csl-ip iqn2-lld dfe-lld"
+
+include iqn2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} IQN2_SRC_DIR=${WORKDIR}/git"
+
+do_compile () {
+	oe_runmake clean DEVICE=k2l
+	oe_runmake tests DEVICE=k2l
+}
+
+do_install () {
+	oe_runmake installbin DEVICE=k2l IQN2_SRC_DIR=${WORKDIR}/git INSTALL_BIN_BASE_DIR=${D}/${bindir}
+}

recipes-bsp/iqn2-lld/iqn2-lld.inc

@@ -0,0 +1,21 @@
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+LICENSE = "BSD-3-Clause"
+
+IQN2_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/iqn2-lld.git"
+IQN2_LLD_GIT_PROTOCOL = "git"
+IQN2_LLD_GIT_BRANCH = "master"
+IQN2_LLD_GIT_DESTSUFFIX = "git/ti/drv/iqn2"
+
+# Following commit corresponds to DEV.IQN_LLD.01.00.00.08F
+IQN2_LLD_SRCREV = "29d5358b944f1447c024263f86e8c71784440b99"
+
+BRANCH = "${IQN2_LLD_GIT_BRANCH}"
+SRC_URI = "${IQN2_LLD_GIT_URI};destsuffix=${IQN2_LLD_GIT_DESTSUFFIX};protocol=${IQN2_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${IQN2_LLD_SRCREV}"
+
+PV = "1.0.0.8"
+INC_PR = "r1"
+
+COMPATIBLE_MACHINE = "k2l-evm"
+
+S = "${WORKDIR}/${IQN2_LLD_GIT_DESTSUFFIX}"

recipes-bsp/iqn2-lld/iqn2-lld_git.bb

@@ -0,0 +1,18 @@
+DESCRIPTION = "TI IQN2 peripheral module low level driver"
+
+DEPENDS = "common-csl-ip"
+
+include iqn2-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	oe_runmake clean
+	oe_runmake lib
+}
+
+do_install () {
+	oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/mmap-lld/mmap-lld-test_git.bb

@@ -0,0 +1,42 @@
+DESCRIPTION = "TI KEYSTONE MMAP driver test binaries "
+include mmap-lld.inc
+
+PR = "${INC_PR}.1"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEPENDS="common-csl-ip mmap-lld"
+RDEPENDS_${PN}="uio-module-drv"
+
+DEVICELIST_k2hk-evm = "k2h k2k"
+DEVICELIST_k2e-evm  = "k2e"
+
+CHOICELIST = " yes \
+               no \
+"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+			DEVICE="$device" MPAX_SRC_DIR="${S}"
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples \
+				PDK_INSTALL_PATH=${STAGING_INCDIR} \
+				DEVICE="$device" MPAX_SRC_DIR="${S}" \
+				USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin \
+		PDK_INSTALL_PATH=${STAGING_INCDIR} \
+		DEVICE="$device" MPAX_SRC_DIR="${S}" \
+		INSTALL_BIN_BASE_DIR="${D}/${bindir}"
+	done
+}

recipes-bsp/mmap-lld/mmap-lld.inc

@@ -0,0 +1,22 @@
+LICENSE = "BSD-3-Clause"
+
+COMPATIBLE_MACHINE = "keystone"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=b3315b8190036fe1c6a8263d02e15606"
+
+MMAP_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/mmap-lld.git"
+MMAP_LLD_GIT_PROTOCOL = "git"
+MMAP_LLD_GIT_BRANCH = "master"
+MMAP_LLD_GIT_DESTSUFFIX = "git/ti/runtime/mmap"
+
+# Commit correspond to DEV.MMAP.02.00.00.04
+MMAP_LLD_SRCREV = "306895eb2d5decd14a760e70d273946958ff716f"
+
+BRANCH="${MMAP_LLD_GIT_BRANCH}"
+SRC_URI = "${MMAP_LLD_GIT_URI};destsuffix=${MMAP_LLD_GIT_DESTSUFFIX};protocol=${MMAP_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${MMAP_LLD_SRCREV}"
+
+PV = "2.0.0.4"
+INC_PR = "r4"
+
+S = "${WORKDIR}/git/ti/runtime/mmap"

recipes-bsp/mmap-lld/mmap-lld_git.bb

@@ -0,0 +1,14 @@
+DESCRIPTION = "TI KEYSTONE mmap driver using Keystone MPAX Programming"
+include mmap-lld.inc
+
+PR = "${INC_PR}.0"
+
+DEPENDS="common-csl-ip"
+
+do_compile () {
+	make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR}
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/nwal-lld/nwal-lld-test_git.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "TI Network Abstraction Layer unit test binaries"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld hplib pa-lld sa-lld pktlib nwal-lld"
+
+include nwal-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			oe_runmake clean NWAL_INC_DIR=${BASEDIR} NWAL_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" DEVICE="$device"
+			oe_runmake tests NWAL_INC_DIR=${BASEDIR} NWAL_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" DEVICE="$device"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		oe_runmake installbin INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} DEVICE="$device"
+	done
+}

recipes-bsp/nwal-lld/nwal-lld.inc

@@ -0,0 +1,28 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+NWAL_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/nwal-lld.git"
+NWAL_LLD_GIT_PROTOCOL = "git"
+NWAL_LLD_GIT_BRANCH = "master"
+
+# Below commit ID corresponds to "DEV.NWAL.02.01.00.08"
+NWAL_LLD_SRCREV = "e6df99e59a848c7afffe90fc9710b7dcb8067c31"
+
+BRANCH = "${NWAL_LLD_GIT_BRANCH}"
+SRC_URI = "${NWAL_LLD_GIT_URI};protocol=${NWAL_LLD_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${NWAL_LLD_SRCREV}"
+
+PV = "02.01.00.08"
+INC_PR = "r2"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/nwal"
+
+DEVICELIST_k2hk-evm = "k2h k2k"
+DEVICELIST_k2l-evm  = "k2l"
+DEVICELIST_k2e-evm  = "k2e"
+
+CHOICELIST = "yes no"

recipes-bsp/nwal-lld/nwal-lld_git.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "TI Network abstraction layer LLD library "
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld hplib pa-lld sa-lld pktlib"
+
+include nwal-lld.inc
+
+PR = "${INC_PR}.0"
+
+EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			oe_runmake clean NWAL_INC_DIR=${BASEDIR} NWAL_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" DEVICE="$device"
+			oe_runmake lib NWAL_INC_DIR=${BASEDIR} NWAL_SRC_DIR=${S} USEDYNAMIC_LIB="$choice" DEVICE="$device"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		oe_runmake install INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir} DEVICE="$device"
+	done
+}

recipes-bsp/pa-lld/files/0001-makefile_armv7-fix-missing-separator-error.patch

@@ -0,0 +1,30 @@
+From 60a938e6902c7cb8bec34abbc5a3723c8094d728 Mon Sep 17 00:00:00 2001
+From: Denys Dmytriyenko <denys@ti.com>
+Date: Tue, 1 Dec 2015 00:00:00 -0500
+Subject: [PATCH] makefile_armv7: fix missing separator error
+
+Doesn't seem to work in all versions of Make, fails like this:
+makefile_armv7:27: *** missing separator.  Stop.
+
+Signed-off-by: Denys Dmytriyenko <denys@ti.com>
+---
+ makefile_armv7 | 3 ---
+ 1 file changed, 3 deletions(-)
+
+diff --git a/makefile_armv7 b/makefile_armv7
+index a2bc4f6..1ae6e0a 100644
+--- a/makefile_armv7
++++ b/makefile_armv7
+@@ -24,9 +24,6 @@ else
+     export LLD_NAME=pa
+ endif        
+ 
+-echo DEVICE=$(DEVICE)
+-echo LLD_NAME=$(LLD_NAME)
+-
+ # Output for prebuilt generated libraries
+ export ARMV7LIBDIR ?= ./lib
+ export ARMV7OBJDIR ?= ./obj/$(DEVICE)
+-- 
+2.2.0
+

recipes-bsp/pa-lld/pa-lld-test_git.bb

@@ -0,0 +1,28 @@
+DESCRIPTION = "TI PA LLD unit test and example binaries"
+
+DEPENDS = "common-csl-ip pa-lld cppi-lld qmss-lld sa-lld"
+
+include pa-lld.inc
+
+PR = "${INC_PR}.1"
+
+CHOICELIST = "yes no"
+
+do_compile () {
+# Now build the lld unit test examples
+	for device in ${DEVICELIST}
+	do
+	make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/pa-lld/pa-lld.inc

@@ -0,0 +1,33 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/pa/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
+
+COMPATIBLE_MACHINE = "keystone"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+PA_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/pa-lld.git"
+PA_LLD_GIT_PROTOCOL = "git"
+PA_LLD_GIT_BRANCH = "master"
+PA_LLD_GIT_DESTSUFFIX = "git/ti/drv/pa"
+
+# Below Commit ID corresponds to "DEV.PA_LLD.03.00.01.05A"
+PA_LLD_SRCREV = "ae3aa3e80ecf64fe5a16515d134a6bc217220e2e"
+
+BRANCH = "${PA_LLD_GIT_BRANCH}"
+SRC_URI = "${PA_LLD_GIT_URI};destsuffix=${PA_LLD_GIT_DESTSUFFIX};protocol=${PA_LLD_GIT_PROTOCOL};branch=${BRANCH} \
+            file://0001-makefile_armv7-fix-missing-separator-error.patch"
+SRCREV = "${PA_LLD_SRCREV}"
+
+PV = "03.00.01.05"
+INC_PR = "r3"
+
+S = "${WORKDIR}/${PA_LLD_GIT_DESTSUFFIX}"
+
+DEVICELIST = "k2h k2k k2l k2e"
+DEVICELIST_k2hk-evm = "k2h k2k"
+DEVICELIST_k2l-evm = "k2l"
+DEVICELIST_k2e-evm = "k2e"
+
+LIBPA = "libpa"
+LIBPA_k2hk-evm = "libpa"
+LIBPA_k2e-evm = "libpa2"
+LIBPA_k2l-evm = "libpa2"

recipes-bsp/pa-lld/pa-lld_git.bb

@@ -0,0 +1,23 @@
+DESCRIPTION = "TI PA LLD library"
+
+DEPENDS = "common-csl-ip rm-lld"
+
+include pa-lld.inc
+
+PR = "${INC_PR}.1"
+
+do_compile () {
+#   Now build the lld in the updated directory
+    for device in ${DEVICELIST}
+    do
+        make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device"
+    done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+
+#   Set the generic device library symbolic link
+    ln -sf ${LIBPA}.so.1.0.0 ${D}${libdir}/libpa_device.so.1
+    ln -sf libpa_device.so.1 ${D}${libdir}/libpa_device.so
+}

recipes-bsp/pktlib/pktlib_git.bb

@@ -0,0 +1,32 @@
+DESCRIPTION = "Provides library for handling packet descriptors for keystone devices"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld cppi-lld"
+COMPATIBLE_MACHINE = "keystone"
+
+PKTLIB_GIT_URI = "git://git.ti.com/keystone-rtos/pktlib.git"
+PKTLIB_GIT_PROTOCOL = "git"
+PKTLIB_GIT_BRANCH = "master"
+
+# Corresponds to DEV.PKTLIB.2.1.0.5
+PKTLIB_SRCREV = "d757026f3d6a837711f4b44b5ffdefed761fc186"
+
+BRANCH = "${PKTLIB_GIT_BRANCH}"
+SRC_URI = "${PKTLIB_GIT_URI};protocol=${PKTLIB_GIT_PROTOCOL};branch=${BRANCH}"
+SRCREV = "${PKTLIB_SRCREV}"
+
+PV = "2.1.0.5"
+PR = "r1"
+
+S = "${WORKDIR}/git/ti/runtime/pktlib"
+
+EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}"
+
+do_compile () {
+	oe_runmake lib
+}
+
+do_install () {
+	oe_runmake install
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0001-PoC-GFX-SDK-Make-5_01_01_01-work-against-3.14-LTS.patch

@@ -0,0 +1,52 @@
+From e2db38959a70d1be604a297276a0b0c2ac219bf5 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Tue, 29 Jul 2014 16:06:17 -0500
+Subject: [PATCH 1/4] PoC: GFX: SDK: Make 5_01_01_01 work against 3.14 LTS
+
+An API rename is the main change.  Also hacked in some function prototypes
+for enabling use of the tilcdc DRM driver instead of the fbdev driver on
+AM335x.  However this all really needs a good cleanup as it is hacky at
+the moment.
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c | 5 +++++
+ GFX_Linux_KM/services4/srvkm/env/linux/mutils.h                 | 6 +++++-
+ 2 files changed, 10 insertions(+), 1 deletion(-)
+
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+index 5c3fc48..3857b95 100644
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+@@ -93,6 +93,11 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ #include <linux/mutex.h>
+ 
+ #include <video/da8xx-fb.h>
++/* used by SGX OMAPLFB drvier */
++typedef void (*vsync_callback_t)(void *arg);
++int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
++int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
++
+ #if defined(PVR_OMAPLFB_DRM_FB)
+ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0))
+ #include <plat/display.h>
+diff --git a/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h b/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
+index 31e0dac..90ec41c 100644
+--- a/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
++++ b/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
+@@ -79,7 +79,11 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 	#define	IOREMAP(pa, bytes)	ioremap_cache(pa, bytes)
+ #else	
+ 	#if defined(__arm__) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+-		#define	IOREMAP(pa, bytes)	ioremap_cached(pa, bytes)
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,13,0))
++			#define	IOREMAP(pa, bytes)	ioremap_cache(pa, bytes)
++		#else
++			#define	IOREMAP(pa, bytes)	ioremap_cached(pa, bytes)
++		#endif
+ 	#else
+ 		#define IOREMAP(pa, bytes)	ioremap(pa, bytes)
+ 	#endif
+-- 
+1.9.1
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0002-SGX-linux-use-platform-data-to-provide-reset-info.patch

@@ -0,0 +1,121 @@
+From 7886ef77e4b48a7edd14acbcbe48f6a898251e78 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Fri, 25 Jul 2014 16:03:14 -0500
+Subject: [PATCH 2/5] SGX: linux: use platform data to provide reset info
+
+In ti-linux-3.14.y we will not have a reset driver unlike ti-linux-3.12.y
+so this commit removes the dependency on the reset driver and instead
+uses the platform data that in a dt environment is configured in
+mach-omap2/pdata-quirks.c
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ GFX_Linux_KM/services4/srvkm/env/linux/module.c | 34 ++++++++++++++++++++-----
+ 1 file changed, 28 insertions(+), 6 deletions(-)
+
+diff --git a/GFX_Linux_KM/services4/srvkm/env/linux/module.c b/GFX_Linux_KM/services4/srvkm/env/linux/module.c
+index e03dc00..90e16ce 100644
+--- a/GFX_Linux_KM/services4/srvkm/env/linux/module.c
++++ b/GFX_Linux_KM/services4/srvkm/env/linux/module.c
+@@ -47,6 +47,10 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ #endif
+ #endif
+ 
++#ifndef CONFIG_RESET_CONTROLLER
++#include <linux/platform_data/sgx-omap.h>
++#endif
++
+ #if defined(SUPPORT_DRI_DRM) && !defined(SUPPORT_DRI_DRM_PLUGIN)
+ #define	PVR_MOD_STATIC
+ #else
+@@ -344,9 +348,11 @@ static LDM_DRV powervr_driver = {
+ LDM_DEV *gpsPVRLDMDev;
+ 
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0))
++#ifdef CONFIG_RESET_CONTROLLER
+ struct reset_control *rstc;
+ bool already_deasserted = false;
+ #endif
++#endif
+ 
+ #if defined(MODULE) && defined(PVR_LDM_PLATFORM_MODULE) && \
+ 	!defined(PVR_USE_PRE_REGISTERED_PLATFORM_DEV)
+@@ -388,11 +394,14 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ #endif
+ {
+ 	SYS_DATA *psSysData;
+-	int ret;	
++	int ret;
++	struct device *dev = &pDevice->dev;
++	struct gfx_sgx_platform_data *pdata = dev->platform_data;
++
+ 	PVR_TRACE(("PVRSRVDriverProbe(pDevice=%p)", pDevice));
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0))
++#ifdef CONFIG_RESET_CONTROLLER
+ 	rstc = reset_control_get(&pDevice->dev, NULL);
+-
+ 	if (IS_ERR(rstc)) 
+ 	{
+ 		dev_err(&pDevice->dev, "%s: error: reset_control_get\n", __func__);
+@@ -403,7 +412,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 
+ 	if (ret < 0)
+ 	{
+-		dev_err(&pDevice->dev, "%s: error: reset_control_clear_reset\n", __func__);
++		dev_err(dev, "%s: error: reset_control_clear_reset\n", __func__);
+ 		return ret;
+ 	}
+ 
+@@ -413,11 +422,22 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 	{
+ 		already_deasserted = true;
+ 	}
+-	else if (ret < 0) 
++	else if (ret < 0)
+ 	{
+-		dev_err(&pDevice->dev, "%s: error: reset_control_deassert\n", __func__);
++		dev_err(dev, "%s: error: reset_control_deassert\n", __func__);
+ 		return ret;
+ 	}
++#else
++	if (pdata && pdata->deassert_reset) {
++		ret = pdata->deassert_reset(pDevice, pdata->reset_name);
++		if (ret) {
++			dev_err(dev, "Unable to reset SGX!\n");
++		}
++	} else {
++		dev_err(dev, "SGX Platform data missing deassert_reset!\n");
++		return -ENODEV;
++	}
++#endif  /* CONFIG_RESET_CONTROLLER */
+ #endif
+ 
+ #if 0   /* INTEGRATION_POINT */
+@@ -432,7 +452,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 	{
+ 		return -EINVAL;
+ 	}
+-#endif	
++#endif
+ 	/* SysInitialise only designed to be called once.
+ 	 */
+ 	psSysData = SysAcquireDataNoCheck();
+@@ -445,6 +465,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 		}
+ 	}
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0))
++#ifdef CONFIG_RESET_CONTROLLER
+         if (!already_deasserted)
+         {
+                 ret = reset_control_is_reset(rstc);
+@@ -454,6 +475,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+                 }
+         }
+         reset_control_put(rstc);
++#endif /* CONFIG_RESET_CONTROLLER */
+ #endif
+ 
+ 	return PVRSRVIONClientCreate();
+-- 
+1.9.1
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0003-SGX-displayclass-am335x-am437x-fix-mutex-deadlock-wa.patch

@@ -0,0 +1,153 @@
+From cf5156ff82e14fe01a194f9fa9a9adc528ac72f0 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Tue, 29 Jul 2014 15:39:56 -0500
+Subject: [PATCH 3/4] SGX: displayclass: am335x, am437x - fix mutex deadlock
+ warning
+
+Rearrange the locking semantics in the Unblank screen function to
+remove the kernel warning about a possible deadlock scenario.
+
+The warning presents itself on the console like this:
+[ 2976.202979] ======================================================
+[ 2976.202983] [ INFO: possible circular locking dependency detected ]
+[ 2976.202994] 3.14.11-00997-gb20d0ac-dirty #53 Tainted: G           O
+[ 2976.202997] -------------------------------------------------------
+[ 2976.203005] OGLES2Chameleon/1203 is trying to acquire lock:
+[ 2976.203058]  (console_lock){+.+.+.}, at: [<bf07a310>]
+OMAPLFBUnblankDisplay+0x24/0xbc [omaplfb]
+[ 2976.203062]
+[ 2976.203062] but task is already holding lock:
+[ 2976.203087]  (&fb_info->lock){+.+.+.}, at: [<c0312358>]
+lock_fb_info+0x18/0x3c
+[ 2976.203090]
+[ 2976.203090] which lock already depends on the new lock.
+[ 2976.203090]
+[ 2976.203093]
+[ 2976.203093] the existing dependency chain (in reverse order) is:
+[ 2976.203101]
+[ 2976.203101] -> #1 (&fb_info->lock){+.+.+.}:
+[ 2976.203112]        [<c0312358>] lock_fb_info+0x18/0x3c
+[ 2976.203124]        [<c0313a7c>] register_framebuffer+0x174/0x26c
+[ 2976.203146]        [<c033c314>] omapfb_create_framebuffers+0x48c/0x7ac
+[ 2976.203157]        [<c033d3c4>] omapfb_probe+0x4d4/0x848
+[ 2976.203170]        [<c0381cc8>] platform_drv_probe+0x18/0x48
+[ 2976.203189]        [<c038096c>] driver_probe_device+0x10c/0x238
+[ 2976.203199]        [<c0380b2c>] __driver_attach+0x94/0x98
+[ 2976.203208]        [<c037f0f0>] bus_for_each_dev+0x54/0x88
+[ 2976.203216]        [<c03800f0>] bus_add_driver+0xd8/0x1d8
+[ 2976.203223]        [<c038115c>] driver_register+0x78/0xf4
+[ 2976.203234]        [<c0008968>] do_one_initcall+0xe4/0x144
+[ 2976.203250]        [<c07d3c18>] kernel_init_freeable+0xfc/0x1cc
+[ 2976.203261]        [<c0563260>] kernel_init+0x8/0xec
+[ 2976.203275]        [<c000e648>] ret_from_fork+0x14/0x2c
+[ 2976.203284]
+[ 2976.203284] -> #0 (console_lock){+.+.+.}:
+[ 2976.203301]        [<c008bc00>] console_lock+0x4c/0x60
+[ 2976.203328]        [<bf07a310>] OMAPLFBUnblankDisplay+0x24/0xbc [omaplfb]
+[ 2976.203340]        [<bf0797f4>] OpenDCDevice+0x60/0x78 [omaplfb]
+[ 2976.203459]        [<bf041ac0>] PVRSRVOpenDCDeviceKM+0xec/0x178 [pvrsrvkm]
+[ 2976.203654]        [<bf05645c>] PVRSRVOpenDCDeviceBW+0x6c/0xac [pvrsrvkm]
+[ 2976.203811]        [<bf056d10>] BridgedDispatchKM+0xf4/0x14c [pvrsrvkm]
+[ 2976.203966]        [<bf04f304>] PVRSRV_BridgeDispatchKM+0xf0/0x204
+[pvrsrvkm]
+[ 2976.203987]        [<c0129500>] do_vfs_ioctl+0x78/0x61c
+[ 2976.203997]        [<c0129b08>] SyS_ioctl+0x64/0x74
+[ 2976.204013]        [<c000e580>] ret_fast_syscall+0x0/0x48
+[ 2976.204016]
+[ 2976.204016] other info that might help us debug this:
+[ 2976.204016]
+[ 2976.204019]  Possible unsafe locking scenario:
+[ 2976.204019]
+[ 2976.204022]        CPU0                    CPU1
+[ 2976.204024]        ----                    ----
+[ 2976.204030]   lock(&fb_info->lock);
+[ 2976.204036]                                lock(console_lock);
+[ 2976.204041]                                lock(&fb_info->lock);
+[ 2976.204046]   lock(console_lock);
+[ 2976.204048]
+[ 2976.204048]  *** DEADLOCK ***
+[ 2976.204048]
+[ 2976.204055] 2 locks held by OGLES2Chameleon/1203:
+[ 2976.204217]  #0:  (psPVRSRVMutex#2/1){+.+.+.}, at: [<bf04f238>]
+PVRSRV_BridgeDispatchKM+0x24/0x204 [pvrsrvkm]
+[ 2976.204240]  #1:  (&fb_info->lock){+.+.+.}, at: [<c0312358>]
+lock_fb_info+0x18/0x3c
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c | 8 +++++---
+ GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c | 7 +++++--
+ 2 files changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+index 3857b95..a5cc7d0 100644
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+@@ -812,10 +812,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ {
+ #ifdef FBDEV_PRESENT
+ 	int res;
++
++	OMAPLFB_CONSOLE_LOCK();
+ 	if (!lock_fb_info(psDevInfo->psLINFBInfo))
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+ 			": %s: Device %u: Couldn't lock FB info\n", __FUNCTION__,  psDevInfo->uiFBDevID);
++		OMAPLFB_CONSOLE_UNLOCK();
+ 		return (OMAPLFB_ERROR_GENERIC);
+ 	}
+ 
+@@ -825,14 +828,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ 	* notification.
+ 	*/
+ 
+-
+-	OMAPLFB_CONSOLE_LOCK();
+ 	psDevInfo->psLINFBInfo->flags |= FBINFO_MISC_USEREVENT;
+ 	res = fb_blank(psDevInfo->psLINFBInfo, bBlank ? 1 : 0);
+ 	psDevInfo->psLINFBInfo->flags &= ~FBINFO_MISC_USEREVENT;
+ 
+-	OMAPLFB_CONSOLE_UNLOCK();
+ 	unlock_fb_info(psDevInfo->psLINFBInfo);
++	OMAPLFB_CONSOLE_UNLOCK();
++
+ 	if (res != 0 && res != -EINVAL)
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c
+index c79dbd0..58b8640 100755
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c
+@@ -948,10 +948,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ {
+ #ifdef FBDEV_PRESENT
+ 	int res;
++
++	OMAPLFB_CONSOLE_LOCK();
+ 	if (!lock_fb_info(psDevInfo->psLINFBInfo))
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+ 		": %s: Device %u: Couldn't lock FB info\n", __FUNCTION__,  psDevInfo->uiFBDevID);
++		OMAPLFB_CONSOLE_UNLOCK();
+ 		return (OMAPLFB_ERROR_GENERIC);
+ 	}
+ 
+@@ -961,13 +964,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ 	* notification.
+ 	*/
+ 
+-	OMAPLFB_CONSOLE_LOCK();
+ 	psDevInfo->psLINFBInfo->flags |= FBINFO_MISC_USEREVENT;
+ 	res = fb_blank(psDevInfo->psLINFBInfo, bBlank ? 1 : 0);
+ 	psDevInfo->psLINFBInfo->flags &= ~FBINFO_MISC_USEREVENT;
+ 
+-	OMAPLFB_CONSOLE_UNLOCK();
+ 	unlock_fb_info(psDevInfo->psLINFBInfo);
++	OMAPLFB_CONSOLE_UNLOCK();
++
+ 	if (res != 0 && res != -EINVAL)
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+-- 
+1.9.1
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0004-SGX-linux-make-it-building-against-ti-linux-3.14.y.patch

@@ -0,0 +1,45 @@
+From c9258e090aec91e70efa814e5a38048b0c45754a Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Tue, 29 Jul 2014 15:54:14 -0500
+Subject: [PATCH 4/4] SGX: linux: make it building against ti-linux-3.14.y
+
+The fbdev drivers moved into their own directory under drivers/video.
+All of the omap2 dss stuff moved there as well so update the Makefile
+to point to the right place.
+
+Keep the old directory around to not break builds against older kernel.
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+Signed-off-by: Denys Dmytriyenko <denys@ti.com>
+---
+ GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild | 1 +
+ GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild
+index 1ae2359..9e0c843 100755
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild
+@@ -15,6 +15,7 @@ EXTRA_CFLAGS =	-DLINUX \
+ 		-I$(PVR_BUILD_DIR)/services4/include \
+ 		-I$(PVR_BUILD_DIR)/services4/system/$(PVR_SYSTEM) \
+ 		-I$(KERNELDIR)/drivers/video/omap2 \
++		-I$(KERNELDIR)/drivers/video/fbdev/omap2 \
+ 		-I$(PVR_BUILD_DIR)/services4/system/include \
+ 		$(SYS_CFLAGS.1) \
+ 
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild
+index 1ae2359..9e0c843 100755
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild
+@@ -15,6 +15,7 @@ EXTRA_CFLAGS =	-DLINUX \
+ 		-I$(PVR_BUILD_DIR)/services4/include \
+ 		-I$(PVR_BUILD_DIR)/services4/system/$(PVR_SYSTEM) \
+ 		-I$(KERNELDIR)/drivers/video/omap2 \
++		-I$(KERNELDIR)/drivers/video/fbdev/omap2 \
+ 		-I$(PVR_BUILD_DIR)/services4/system/include \
+ 		$(SYS_CFLAGS.1) \
+ 
+-- 
+2.0.2
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-x11_4.09.00.01.bb

@@ -0,0 +1,81 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs (for X11)"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "4_09_00_01"
+IMGPV = "1.9.2188537"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "d"
+PR = "${MACHINE_KERNEL_PR}"
+
+# Select the corresponding hardfp/softfp filename and checksums based on tune flags
+BINFILE_SOFTFP = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+MD5SUM_SOFTFP = "bd35e9d8843aff3a2aca9d41e7db1c7d"
+SHA256SUM_SOFTFP = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "c9f656dce062d1ab10afffd4dfb71b67"
+SHA256SUM_HARDFP = "dbfeba8e1298f139495816334edec1455e6b49b1e11bd1b2aa0a888e5788bb6b"
+
+BINFILE = "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${BINFILE_HARDFP}', '${BINFILE_SOFTFP}', d)}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${MD5SUM_HARDFP}', '${MD5SUM_SOFTFP}', d)}"
+SRC_URI[sha256sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${SHA256SUM_HARDFP}', '${SHA256SUM_SOFTFP}', d)}"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+
+export SUPPORT_XORG ?= "1"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_compile() {
+	export TOOLCHAIN="${TOOLCHAIN_PATH}"
+	export PLAT_CC="${CC}"
+	export PLAT_CPP="${CXX}"
+	export PLAR_AR="${AR}"
+	for kernelver in ${WORKDIR}/../../${PREFERRED_PROVIDER_virtual/kernel}/* ; do
+		cp -f $kernelver/git/drivers/gpu/drm/*.c ${S}/services4/3rdparty/linux_drm/
+	done
+	if [ $(echo -e "${KERNEL_VERSION}\n3.3" | sort --version-sort | head -1) = "3.3" ] ; then
+		cp -f ${S}/services4/3rdparty/linux_drm/Kbuild_3.3 \
+			${S}/services4/3rdparty/linux_drm/Kbuild || true
+	else 
+		if [ $(echo -e "${KERNEL_VERSION}\n3.2" | sort --version-sort | head -1) = "3.2" ] ; then
+			cp -f ${S}/services4/3rdparty/linux_drm/Kbuild_3.2 \
+				${S}/services4/3rdparty/linux_drm/Kbuild || true
+		fi
+	fi
+	oe_runmake BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}
+}
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+         ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+
+    cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules/kernel-30.patch

@@ -1,38 +1,38 @@
-From: Steve Sakoman
-Subject: omap3-sgx-modules: Fix build for Linux 3.0
-
-This patch implements the header change from plat/display.h to video/omapdss.h
-
-Signed-off-by: Steve Sakoman <steve@sakoman.com>
-
---- GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c-orig	2011-08-01 07:21:45.000000000 -0700
-+++ GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c	2011-08-01 07:29:32.000000000 -0700
-@@ -47,12 +47,12 @@
- #if defined (SUPPORT_TI_DSS_FW)
- #include <asm/io.h>
- 
--#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
--#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39)))
-+#include <video/omapdss.h>
-+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
- #include <plat/display.h>
--#else 
-+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
- #include <mach/display.h>
--#endif 
- #else 
- #include <asm/arch-omap/display.h>
- #endif 
-@@ -64,7 +64,11 @@ extern int omap_dispc_request_irq(unsign
- extern void omap_dispc_free_irq(unsigned long, void (*)(void *), void *);
- extern void omap_dispc_set_plane_base(int plane, IMG_UINT32 phys_addr);
- #else
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39))
-+#include <video/omapdss.h>
-+#else
- #include <plat/display.h>
-+#endif
- #include <linux/console.h>
- #include <linux/fb.h>
- static omap_dispc_isr_t *pOMAPLFBVSyncISRHandle = NULL;
+From: Steve Sakoman
+Subject: omap3-sgx-modules: Fix build for Linux 3.0
+
+This patch implements the header change from plat/display.h to video/omapdss.h
+
+Signed-off-by: Steve Sakoman <steve at sakoman.com>
+
+--- GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c-orig	2011-08-01 07:21:45.000000000 -0700
++++ GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c	2011-08-01 07:29:32.000000000 -0700
+@@ -47,12 +47,12 @@
+ #if defined (SUPPORT_TI_DSS_FW)
+ #include <asm/io.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39)))
++#include <video/omapdss.h>
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
+ #include <plat/display.h>
+-#else 
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
+ #include <mach/display.h>
+-#endif 
+ #else 
+ #include <asm/arch-omap/display.h>
+ #endif 
+@@ -64,7 +64,11 @@ extern int omap_dispc_request_irq(unsign
+ extern void omap_dispc_free_irq(unsigned long, void (*)(void *), void *);
+ extern void omap_dispc_set_plane_base(int plane, IMG_UINT32 phys_addr);
+ #else
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39))
++#include <video/omapdss.h>
++#else
+ #include <plat/display.h>
++#endif
+ #include <linux/console.h>
+ #include <linux/fb.h>
+ static omap_dispc_isr_t *pOMAPLFBVSyncISRHandle = NULL;

recipes-bsp/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb

@@ -1,45 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=21228a42e27d1d104b31a83f7c9da935"
-
-TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
-require ../../recipes-ti/includes/ti-eula-unpack.inc
-
-SGXPV = "4_03_00_02"
-IMGPV = "1.6.16.3977"
-BINFILE := "Graphics_SDK_setuplinux_${SGXPV}.bin"
-
-inherit module
-
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/Graphics_SDK_setuplinux_${SGXPV}.bin \
-           file://Compile-fixes-for-38-kernel.patch \
-           file://kernel-30.patch \
-          "
-SRC_URI[md5sum] = "ff8c1f2b8e4cb42f4ced6a613b081ada"
-SRC_URI[sha256sum] = "cdb0bd3964e107733d632aa8224e0537b05c1ffac34befc036423458c8d75255"
-
-S = "${WORKDIR}/Graphics_SDK_${SGXPV}/GFX_Linux_KM"
-
-PVRBUILD = "release"
-export KERNELDIR = "${STAGING_KERNEL_DIR}"
-
-INHIBIT_PACKAGE_STRIP = "1"
-
-TI_PLATFORM_omap3 = "omap3630"
-TI_PLATFORM_ti816x = "ti81xx"
-
-MODULESLOCATION_omap3 = "dc_omap3430_linux"
-MODULESLOCATION_ti816x = "dc_ti81xx_linux"
-
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM}"
-
-do_install() {
-	mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-	cp ${S}/pvrsrvkm.ko \
-	   ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
-	   ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
-	   ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-}