The patch was dropped with 3.17 update:
https://git.yoctoproject.org/meta-ti/commit/?h=dunfell&id=f8182afdcfe427865707077d353359827f1ff6bf
But the patch is still needed for internal OE-built toolchain to pass
sysroot, otherwise libgcc.a cannot be found:
| aarch64-oe-linux-ld.bfd: cannot find libgcc.a: No such file or directory
The older version from meta-arm/dunfell no longer applies, so copy a newer
version of the patch locally.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
main-r5f0_0-fw was pointing to pdk-ipc binary, while it should be
pointing to ethfw one for j784s4-evm, j784s4-hs-evm
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports
RGMII mode.
Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the
Add-On Ethernet Card.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the MCSPI loopback overlay file for J784S4 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the MCSPI loopback overlay file for J721S2 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the MCSPI loopback overlay file for J721E EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J721E SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SHA for optee_os had been of 3.20-rc1 tag instead of 3.20 tag which
had been marked stable. Change the tag to 3.20.
Fixes: 280e7b4b3a ("optee: update optee components to 3.20 tag")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM69 SK has PWM output pins connected to its RPi header. Add
overlay file to enable PWM pins.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the basic J784S4 HS-FS configuration.
* Add configurations to support both HS-FS and GP keeping GP as default.
* Add ti-sci-firmware overrides for HS-FS.
* Remove evm conf file inclusion in hs-evm conf.
* Add j784s4 hs-evm specific config to hs-evm conf.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62A configuration
- Add machine conf for AM62A.
- The wic images will boot on AM62A HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
- Sign ATF, OPTEE and RTOS Firmware.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the basic J721S2 HS-FS configuration.
- Add configurations to support both HS-FS and GP keeping GP
as default.
- Add ti-sci-firmware overrides for HS-FS.
- Remove evm conf file inclusion in hs-evm conf.
- Add j721s2 hs-evm specific config to hs-evm conf.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With the advent of using multiconfigs to build all of the versions of
the machines (gp, hs-se, hs-fs, etc...) the sysfw.itb has become a point
of contention for do_deploy. To resolve the duplicate file copy errors
from bitbake we need to uniquify the sysfw.itb file names. So, let's do
the same thing we do with the tiboot3.bin file and add the SYSFW_SUFFIX
into the name.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62x LP HS-FS configuration
- Add machine conf for AM62x LP HS-FS.
- The wic images will boot on AM62x LP HS-FS devices by default. The sysfw image for HS-SE will be packaged in the wic image as tiboot3-am62x-hs-evm.bin.
- Add ti-sci-firmware overrides.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62x HS-FS configuration
- Add machine conf for AM62x HS-FS.
- The wic images will boot on AM62x HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
K3 platforms include the FIT image-based kernel by default. The bootloader
loads the kernel and DTB from the FIT image. The DTB/DTBOs are added to the
FIT image but the load address is not included in the image section of
each DTB/DTBO. This load address is determined by the LOADADDRESS macros
in the kernel-fitmage class.
Hence, define the RD/DTB/DTBOs LOADADDRESS and OFFSET macros in the K3 common
include, and remove those macros defined in the K3 board specific config files.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM68 SK has PWM output pins connected to its RPi headers. Add
overlay file to enable PWM pins.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use ti-k3-secdev native package to provide secure-binary-image.sh script
when it is not passed on as an environment variable. This fixes and issue
with AM64xx which is always HS but should not require TI_SECURE_DEV_PKG
when building for HS-FS platforms.
This is backported from a patch for kirkstone. [1]
[1] https://lists.yoctoproject.org/g/meta-ti/topic/master_kirkstone_patch_1_8/96819771
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OPTEE tests is not being upgraded due to a newer python dependency for
the build
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the overlay files for AM69 SK:
1. Fusion board (For FPDLink-III cameras).
2. IMX390 FPDLink-III camera module that includes both the CM and
RCM type of modules.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit 9a007a3fea.
We ran into some build failures on the older legacy platforms due
to this change and so are reverting this while we investigate.
OPTEE tests is not being upgraded due to a newer python dependency for
the build
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62x HS-SE configuration.
- Add machine conf for AM62x HS-SE.
- The wic images will boot on AM62x GP devices by default. To boot on AM62x HS-SE, simply switch out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am62x-hs-evm.bin tiboot3.bin
- Add ti-sci-firmware overrides.
- Add support to sign ATF and OPTEE.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the overlay files, over AM68 SK, for the following:
1. Fusion board (For FPDLink-III cameras).
2. IMX390 FPDLink-III camera module which includes both the CM and
RCM type of modules.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The extension for OV5640 overlay is incorrect. Therefore, update the
correct extension to build the overlay with .dtbo
Fixes: f67e9805 ("conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREE")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update the SHA of k3conf to pickup am62ax support
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM69 Starter Kit is a single board designed based on TI's AM69 SOC
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. Add support
for the same to include the board dtb file into the root filesystem.
Add DT overlays support for the following features on AM69 SK:
* Add DTBO entry to support OV5640 camera
* Add DTBO entry to support RPi(IMX219) camera
* Add DTBO entry for the DDR memory carveout.
[1]:https://www.ti.com/lit/zip/spruj52
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade arm-trusted-firmare to v2.8-226-g2fcd408bb.
This upgrade picks up K3 L2 cache, snoop delayed, and EA
handling updates from upstream master.
Do not update to tip of master due to PSCI system off
support breaking AM62x and AM62q platforms.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
- Let's add support for secure RTOS IPC Firmware images for am62xx. This will sign RTOS IPC Firmware for all EVMs based on am62xx (i.e AM62X and AM62X-LP-EVM)
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit 98506a4a07 ("optee-os: Update SRCREV for OP-TEE TRNG in AM62X")
Disables SW PRNG => Enabling Hardware RNG. This is breaking Suspend Resume
on AM62xx EVM variants. To fix this keep using SOFTWARE_PRNG enabled as
it was.
Cc: vibhore@ti.com
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In addition to releasing the signed versions of the bl31.bin and
bl32.bin files, also release the unsigned original versions.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump source revision. Changelog from source:
- Cleanup the device initialization routine for all platforms
- Add a power safeguard for multicore initialization
- Enable active power management for AM62 devices
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally
targeted for J7-based devices, but AM62A can re-use the existing
overlays. Both the CM and RCM type of modules are supported.
As AM62A only has one CSI-RX port, we only use 4 out of the 8 total
FPDLink ports on the fusion board.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM68 Starter Kit is a low cost, small form factor board designed for
TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance
for industrial applications. Add DTB entry for the same.
AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors.
Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout.
[1]:http://www.ti.com/lit/zip/spruj28
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lower the log level for am62axx platform
commit 27641e1f2d ("optee-os: Lower log level for AM62x")
changes the log level for am62xx platforms.
This patch is to extend the same for am62axx
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reported-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update library to 0.5.2 as it adds support for AM62A
SoC.
Co-Authored-By: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the following overlay files on AM62A SK:
1. Fusion board (For FPDLink-III cameras)
2. OV2312 FPDLink camera module
3. IMX219 RPi-compatible camera module
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
optee-os was updated to 3.19 tag but the others were still outdated.
Updates other optee components to 3.19 tag
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While removing SOFTWARE_PRNG support
commit:98506a4a07363a1b57012ccfaee263f47e5b46c4,
accidently removed the changes applied
by commit:27641e1f2d7f6696fd7bbd8f24fcac20766b6234
(optee-os: Lower log level for AM62x).
Reverting those changes back
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With a recent patch to the TI kernel that includes debug symbols,
the vmlinux.gz file grew in size that impacted the testing.
This file is not needed to be in the final image so remove it
from the list.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to the commit when trng support was
added in upstream OP-TEE for am62x platform to access rng.
Also, enable trng support as trng support is added now in OP-TEE
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the HS platform to the compatible list in the recipe.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the HS platform to the compatible list in the recipe.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Changes to support new j784s4-hs platform in:
1) ti-sci-fw_git: Update firmware prefix for j784s4-hs
2) atf: sign the image
4) optee: sign the image
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Sign the firmwares for j784s4 similar to j721s2 hs.
Duplicate all j784s4 entries for j784s4-hs as we cannot use same
keyword for match between j784s4-evm and j784s4-hs-evm.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J784S4 HS platform.
Used J721S2 hs as reference.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3}
and the condition won't work.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Include ti-paths.inc so TI_K3_SECDEV_INSTALL_DIR_RECIPE gets defined and
artifacts are installed in the correct location.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the source revision for the rogue pvr kernel module.
Source changelog:
- A hack was added to increase stability on J7 platforms while we are
looking into a proper fix for cache coherency issues in this module
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update firmware name to wave521c_k3_codec_fw.bin to align with
linux-firmware main branch. the following patch is part of
ti-linux-firmware thru mainline sync.
commit 48407ffd ("cnm: update chips&media wave521c firmware.")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OP-TEE upstream now has support for sa3ul for j721s2 platform.
Re-enable the trng driver which was disabled earlier.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Change the OP-TEE flavour from default k3-j721e to k3-j784s4
as sa3ul support for j784s4 is upstreamed in OP-TEE and we
can use the same settings in j721s2 to access TRNG.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the new OP-TEE flavour for J784S4 instead of default k3-j721e.
The TI-SCI ID for MCU domain sa2ul/sa3ul are not the same for
J721E and J784S4. So a new flavour is added in upstream OP-TEE.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to the commit when sa3ul support was
added in upstream OP-TEE for J784S4 platform to access rng.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2.
This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt.
This didn't show up as a problem on systemd systems (eg, default) because systemd will
automatically setup a serial tty with the console option passed in on the kernel command line
(using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the graphics recipes source revision and remove the old BVNC
switch. The BVNC is now baked into the platform Makefile that is
selected with PVR_BUILD_DIR / TARGET_PRODUCT.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.5.1 version that enables the
support for R5F on am62x SoCs.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adds support for secure firmware images in J721S2 HS EVM.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adds support for secure firmware images in J7200 HS EVM.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adds support for secure firmware images in J721E HS EVM.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
devtool has a long-standing bug where it cannot handle references to ${WORKDIR}
due to externalsrc:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=12677
linux-ti-mainline clones additional ti-upstream-tools repo alongside the kernel
sources into ${WORKDIR}, which exposes this devtool bug.
Work around the issue by moving ti-upstream-tools inside the kernel source tree,
i.e. inside ${S}
Reported-by: Radoslav Pesek <radoslav.pesek@microstep-mis.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The supported device types depends on the SoC, not on any specific
board or EVM. Any board can be populated with any of the 3 supported
AM64x types. Move these into the AM64x common include.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM64x devices will only be available as SR2.0 HS-FS. Set this as the
default type provided by the SDK. To allow SR2.0 HS-SE to continue to
boot, like we did with GP, we add an extra machine to build SR2.0 HS-SE
SYSFW. To use on SR2.0 HS-SE boards simply switch out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am64x_sr2-hs-evm.bin tiboot3.bin
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cdns mhdp bridge is present in j721s2 soc.
Add the dependency for the same
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Switch the DEPENDS_append expression to use d.getVar() instead of the
usual variable expansion to prevent the inline Python command from
becoming mangled.
Signed-off-by: Randolph Sapp <rs@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
During resume from low power mode suspend OP-TEE prints some messages
on the UART. It seems this UART is not powered at this point in the
sequence breaking suspend/resume. We should track down the exact
prints and quiet them. Until we get that fix upstream, lets lower
the log level for this platform to unblock the LPM work.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.18.0.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The regex originally to correct all URLs that were still using the old
git protocol didn't have a check in place to see if the URL was already
using the correct protocol.
This just fixes the two affected URLs.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This platform is similar to the currently supported am62xx-evm, except
that we currently need new defconfigs for u-boot and new dtbs in the
filesystem.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In the latest U-Boot the HS images for AM64x have been renamed to the
default names, and the GP have been changed to *_unsigned. Remove
the overrides to pull the now default HS images.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This is needed for building the latest optee-examples.
While here switch to HTTPS for fetching from Github.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The HS-SE AM64xx machine can now be run on GP devices and built without
needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available
in the HS-FS type going forward. Make the HS-SE the default and remove
the original GP machine.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This machine was missed when making combined R5 boot the default.
Add this machine to fix build failure.
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
FIT Image based kernels are valid for all K3 devices, not just HS, deploy
this kernel image type by default so it doesn't have to be appended on
a per-device-type basis.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use multiconfig to generate a GP SYSFW image. This allows the HS SDK
to be used on GP boards by simply switching out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am64x-gp-evm.bin tiboot3.bin
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest commit of ti-u-boot-2021.01.
As part of this U-Boot update the non-HS AM64x-evm defconfig was removed.
This is okay as building this defconfig without defining TI_SECURE_DEV_PKG
will still result in usable binaries for the non-HS devices. Use the
HS defconfig for both the HS and non-HS machines.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe deploys the raw SYSFW unconditionally which causes issues
when doing multiconfig builds. What should happen is only one deploys
these, select that the same way we select which one deploys the default
SYSFW symlink. Move the deploy step there.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The K3 TI_SECURE_DEV_PKG is the same for all devices, move this out
of each machine file and into the common K3 includes. This doesn't
have any effect on the GP machines as they make no use of it.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add SYSFW_TIBOOT3_SYMLINK and use it the same way we use SYSFW_SYMLINK
for the non-combined boot flow, to allow not setting the default for
some machine types.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Going forward, the combined tiboot3.bin is going to be the standard. Only
AM65x and J721e will still use the split boot.
Set DEPENDS and EXTRA_OEMAKE for combined boot and override only for the
two split boot platforms. This makes it easier to add new platforms and
simplifies deployment logic.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Going forward, the combined tiboot3.bin is going to be the standard. Only
AM65x and J721e will still use the split boot. Set the output of U-Boot
to be u-boot-spl.bin by default and override only for the two split boot
platforms. This makes it easier to add new platforms and simplifies
deployment logic.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This makes sense but looks like was done wrong to match AM65xx which
needed the exact EVM specified due to this only working on SR2.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We already cd into DEPLOYDIR so this is not needed. This now matches the
keystone version below. Also fixes build in some odd situations.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently we reuse UBOOT_* names which usually are the same we
want to give to the name of the SYSFW binary. This isn't always
correct, we should use a SYSFW specific variable in case the
UBOOT names are changed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This allows us to rebuild and re-sign the SYSFW image if needed from
the deploy directory for any SoC type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The k3-image-gen now has two new helper flags SOC_TYPE and SYSFW_DIR
that we can use to simplify this recipe. With these we do not need to do
anything different here for HS builds, the SOC_TYPE selects this now.
DL_URL also do not need cleared anymore, the k3-image-gen will no longer
download missing files when not needed for the current build type.
do_install and do_deploy can also check for the existence of either
sysfw.itb or tiboot3.bin and install/deploy as needed. k3-image-gen only
gerneates the right one now depending on the SoC. Merge all these
steps for all SoCs.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Only the first two K3 devices do not support multi-cert boot so
lets make multi-cert the default and only add back sysfw.itb
for these two devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: lines be preserved?
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
devtool does not work with the current formulation of
the LOCALVERSION variables. We need to use SRCPV to
avoid AUTOREV on bleeding builds, but there will be no
+ in the string, so we cannot split on that. Just
use SRCPV directly.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With J7200 PG1.0 being deprecated, use PG2.0 sysfw when building images for j7200-hs-evm.
Also update k3-image-gen version to support this change.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
arago-project.org is being shut down in August. This
commit changes the last recipes that point to that
old site to point to git.ti.com, or just rmeove the
reference entirely.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Commit bdceaa05ac added SR1.1 support for
J721e HS with the idea that the default sysfw.itb will point to SR1.1.
For that to work, the config for SR1 has to explicitly disable creating
such symlink.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The test app is not compatible with later versions of j7, so
add COMPATIBLE_MACHINE to lock these recipes down to just
j7-evm and j7-hs-evm.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For ARAGO_BRAND=mainline with the am43xx machines, avoid the inclusion
of device tree files that do not exist upstream.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For ARAGO_BRAND=mainline with the dra7xx-evm MACHINE, avoid the
inclusion of device tree files that do not exist upstream.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For ARAGO_BRAND=mainline with the am57xx-evm MACHINE, avoid the
inclusion of device tree files that do not exist upstream.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following commits in ti-linux-5.10.y kernel has introduced a new dtb.
commit: 9b05b2a89ff ("arm64: dts: ti: Add overlay for GESI to enable main CPSW2G in J721S2")
This patch on j721s2 conf is to include the new dtb.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SA2UL driver now works on HS devices, unblock this.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The TRNG driver is not currently functional for these two platforms.
Disable the TRNG driver until fixed.
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
IMAGE_BOOT_FILES was being overwritten in the HS recipes leading to
incomplete binaries in /boot and the naming of the binaries were not
correct.
Fixes /boot partition for HS devices.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
[afd: Extended fix to all HS platforms]
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.17.
We do this to add HUK and AM64x/AM62x support.
With this we need to also switch OPTEEMACHINE for AM64x/AM62x.
To build against the latest OP-TEE the support recipes need updated also.
Move these here into meta-ti so that builds will still work when not using
meta-arago-distro.
The fix patches do not look to be needed anymore.
While here switch to git checkout with https.
NOTE: The latest OP-TEE requires SYSFW 8.04+
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For TF-A we work against upstream first, our fork has only been
used in the rare cases we need to ship a feature before we can
get it upstream. This is not currently the case so lets switch
to upstream repo until there is a need for our fork.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the HS platform to the compatible list in the recipe.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Sign the DM firmware for j721s2 similar to j7200 hs.
Duplicate all j721s2 entries for j721s2-hs as we cannot use same
keyword for match between j721s2-evm and j721s2-hs-evm.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J721S2 HS platform.
Used j7200 hs as reference.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add missing k3-am642-evm-icssg1-dualemac-mii.dtbo.
Reported-by: Judith Mendez <jm@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following commits in ti-linux-5.10.y kernel has introduced new dtbs.
a minimal skeleton and a lpm (low-power-mode) demo dtb.
commit c161df7b1ea0 ("arm64: dts: ti: Introduce k3-am625-sk-lpmdemo")
commit 61df7fcf9307 ("arm64: dts: ti: introduce minimal dt for am625")
This patch on am62xx conf is to include the new dtbs.
Reported-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The DM firmware binary is required for building uboot binaries for
am62xx-evm using toplevel makefile in SDK. Add this file to deploy
directory so it can be included in prebuilt-images directory of SDK
for am62xx-evm.
Signed-off-by: Aparna M <a-m1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Pull in the GPU KM/UMLIBS that enable the unified 4K/64K page
firmware support in the IMG Rogue drivers.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update build flag for arm-trusted-firmware to include low power mode
support
K3_PM_SYSTEM_SUSPEND is added in arm-trusted-firmware now which enables
low power mode support for am62xx.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
upgrade arm-trusted-firmare to master which is currently v2.6+
This upgrade picks up am62x low power mode feature.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This firmware stub is required by the TI foundational security
software while transitioning to low power mode.
Add a recipe for this compatible with am62xx-evm
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Point to an updated SRCREV that fixes a compile error with the clang
compiler.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the k3conf to the latest SHA.
This adds AM62x support.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add missing k3-am625-sk-csi2-ov5640.dtb required for the camera overlay.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Update the ti-rpmsg-char library to 0.4.1 version that enables the
support for AM62x SoC family remote processors.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This commit adds the PRU Software Support Package (PSSP) to the AM62x Linux
Processor SDK under example-applications/pru-icss-x.x.x. It also adds prebuilt
PRU firmware to the default AM62x filesystem image under the /lib/firmware
folder.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SDK folder example-applications/pru-icss-x.x.x to install the latest
version of the PRU Software Support Package (PSSP).
This also uses PSSP v6.1.0 to generate the PRU Halt and RPMsg binaries in the
Linux SDK default filesystem image under /lib/firmware.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Enable the GPU for am62xx and j721s2 and use IMG DDK 1.15
Migrate Imagination DDK 1.13 to DDK 1.15 for J721e
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
ti-sgx-ddk-um's do_install creates a symlink libGLESv2.so.1 to
libGLESv2.so. As this symlink will be installed to ti-sgx-ddk-um, but
its target libGLESv2.so is in ti-sgx-ddk-um-dev, the automated
dependency analysis will add ti-sgx-ddk-um-dev to ti-sgx-ddk-um's
RDEPENDS. This will pull in a large number of other -dev packages
through RDEPENDS and RRECOMMENDS in turn.
Avoid this by having libGLESv2.so.1 point to libGLESv2.so.2 instead of
libGLESv2.so, so the symlink's target is in ti-sgx-ddk-um as well.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
To allow a consistent experience across current devices, enable wic.bmap file
generation for AM3/4/5 images.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The VIP camera capture driver recently ported to ti-linux-5.10.y adds
a DT overlay for the OV10635 camera sensor. Add this to
KERNEL_DEVICTREE so it's added to the artifacts.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We need to control both the source name of the firmware and
the target name, so split the current variable into two and
update the install command.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.4.0 version that enables the
support for j721s2 SoC family remote processors.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are now using binman to generate the images for
K3 AM64 in u-boot.
tools/binman/binman needs python3-setuptools so add it to
DEPENDS.
Reported-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The original recipe listed the compatible platforms to
all of j7, but at this time it is limited to j721s2-evm.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d29025f7e8.
* associated fix in k3-image-gen is picked up now.
commit 892c86501ff7 ("Makefile: Skip signing of binaries for HS combined boot")
hence its no longer needed to carry the same fix from meta-ti here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update ti-linux-firmware and k3-image-gen to
pick latest TIFS and DM v2022.01
This version also adds support to j721s2
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets fix the missing switch firmware binary to point to ping binary
instead. If we attempt to start alternate CPU, we get a very beserk
system.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add firmware recipe to add the Wave521cl firmware pieces in for j7
platform.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets keep ethernet switch firmware disabled till we can actually
integrate it.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets enumerate the C7x target instead of defaulting as a since C7x.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same. Since the
option provided is custom to TI K3, make this a k3 product override
capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same.
Since the option provided is custom to TI K3, make this a k3 product
override capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the srcrev to pick the latest of ti-img-sgx/1.17.4948957/k5.10.
commit eaa9fcd3acff ("km: support OpenEmbedded hardfp toolchain w/o -gnueabihf suffix")
is not picked up on the sdk-ddk-km repo already, hence removing the patch from here.
commit eda7780bfd52 ("Fix driver config for 5.10 kernel") fixes graphics
init failures on sgx platforms
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit ba0ddc5ae9 ("conf: am437xx-evm: Remove non-existent dtb* from
5.10") removed all non-existent dtb* for am437xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following HDMI DTBs.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
The required dts have been added to the 5.10LTS by these two following
commits:
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am437x-gp-evm-hdmi.dts?h=ti-linux-5.10.y&id=25434078d3f93d1346af5
e52e0f150f9083321d8
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am43x-epos-evm-hdmi.dts?h=ti-linux-5.10.y&id=c5114144b568e470a8f6
e613f7c6e8b88ad19d7e
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d5db414172.
We should'nt have to carry patches for u-boot or kernel, since the
upstream is now fixed since 5.14 kernel and u-boot 2021.10 tag onwards,
lets revert the patch to allow upstream to work with 5.15+ kernel and
2021.10 u-boot (from the already applied commit cae609388f
"recipes-bsp: u-boot-ti-mainline: Update to v2021.10 release").
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This adds up numerous fixes for various k3 platforms.
While at it, bump the ti-upstream-tools repo as this sync up gives us:
config: audio_display: Update cdns-mhdp configs
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
SA2UL GP driver will not work for HS. Need SA2UL HS driver.
Till it is implemented blacklist sa2ul for am64xx hs and j7200 hs
Change Suggested by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
The videnc-test-app provides the video encoder test app
(tienc_encode) for j7-evm.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Sidraya <sidraya.bj@pathpartnertech.com>
Found a bug in the PRU_ICSSG examples in PSSP v6.0.0, fixed in v6.0.1.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This patch adds support for J721e HS SR1.1
HS SR1.1 requires updated sysfw binary. Both SR1.0 and SR1.1 sysfw
binary will be generated. sysfw.itb will point to SR1.1
This patch requires J7 SR 1.1 support in K3 Image gen.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Add the firmware packaging recipe for the video decoder
for j721e.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We cannot use j7200 keyword for match b'n j7200-evm and j7200-hs-evm due
to existing j7 keyword, we need to duplicate all the j7200 entries for hs.
Also sign the DM firmware for J7200 similar to J7 HS
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Added support to build combined boot image for hs build.
This required k3 image gen patch that is already merged.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Add new am64x hs platform. This requires two files to be created.
Used am65x and j7 hs platform for reference.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This introduces a critical fix for both AM335X EVM and AM43XX EVM, which
can no longer boot because "uuid" is undefined.
v2021.10 has these two fixes, one for each platform:
- commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only")
- commit e0c91ae24e5b ("ti: am43xx_evm: Switch to DISTRO_BOOT only")
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
https://github.blog/2021-09-01-improving-git-protocol-security-github/
GitHub is deprecating unauthenticated protocols, including git:// so update
SRC_URIs with protocol=https
Explicitly pass branch=master where omitted, as bitbake now requires it.
While at it, update libion to the latest to eliminate upstreamed patch.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
AM64x SoCs have a Cortex-M4F core in MCU domain. This core is used a
standalone device for safety applications. For non safety applications,
the device is exposed as a remote processor with Linux rpmsg framework.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
With ti-sysfs also hosting *gp-cert.bin for am64x hs-fs breaks gp.
This patch removes * to directly reference the TISCI firmware
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
PRU Software Support Package (PSSP) v6.0.0 should be included in Linux Processor
SDK 8.1 for AM335x, AM437x, AM57x (if generated), AM64x, AM65x under
example-applications. For the release notes that come with v6.0.0, see
https://git.ti.com/cgit/pru-software-support-package/pru-software-support-package/tag/?h=v6.0.0
Linux Processor SDK 8.1 will be the first AM64x SDK release to include the PSSP.
PRU firmware will also be generated and placed in the default filesystem under
lib/firmware/pru.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
https://www.freedesktop.org/wiki/Software/systemd/TheCaseForTheUsrMerge/
When "usrmerge" distro feature is enabled, root directories /bin, /sbin, /lib
are simply symlinks pointing to their counterparts in /usr. Hence, modules
should be installed accordingly into /usr/lib/modules/...
Since IMG Makefiles don't take the direct target directory, such as
${nonarch_base_libdir}/modules/, adjust the top-level rootfs path instead.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reported-by: Vivien Didelot <vdidelot@pbsc.com>
Tested-by: Vivien Didelot <vdidelot@pbsc.com>
Adds AUTOREV support for ti-linux-fw for nightly builds.
Requires corresponding change in meta-arago branding-bleeding.inc
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Change to support common INC for all firmware
This will help with:
1) Eliminating requirement to change multiple recipes for firmware
update
2) This will help support AUTOREV
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Update the ti-rpmsg-char library to 0.3.1 version that enables the
support for the M4F remote processor on AM64x SoCs.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
The uboot extlinux is using kernel device tree variable to populate the
dtb files. The error occurs if the device tree files are in ti folder
since there is no ti folder in deploy directory. Fix the kernel device
tree path before using in the uboot extlinux.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
To make use of the "generic distro boot" support in U-Boot, an
extlinux.conf file needs to be generated and reside in the extlinux
directory. The extlinux.conf file will be parsed by U-Boot and the
"append" line will be evaluated and expanded and used entirely as the
bootargs passed to the kernel. Our generated extlinux.conf states
that the kernel image and device trees live one level up (so the root
directory) from it, so populate that location with our kernel and device
trees.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
All of our platforms here support running EFI binaries. We can have wic
generate a simple grub.cfg file for us that will find the root partition
via PARTUUID and utilize the device tree that is already discoverable
via the EFI configuration tables. Assuming the EFI loader is U-Boot,
this device tree can be replaced at run-time by the normal mechanism of
loading in to memory and passing that address as an argument to bootefi.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Build is failing for ti-rtos-firmware when ARAGO_BRAND = "mainline"
with below error:
"ERROR: ti-rtos-firmware-08.00.00.32-r0.0 do_fetch: Fetcher failure:
Unable to find file file://0001-Revert-soc-am64x-Makefile-Move-the-
SPL-Load-address-.patch;patchdir=../imggen anywhere."
This is because the mentioned patch is not present in the current path.
Fix this by updating the path to include ti-sci-fw
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Changes for firmware update( eff643e5 ti-rtos-firmware: update the
source to ti-linux-firmware) were in-complete without soft link.
1) Added soft link missing for the rtos firmware.
2) Updated the IPC am64x firmware name to be consistent with 7.3
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
These are the complete changes in the patch
1) Updated the firmware to fix IPC load issue due to resource_table
placement
2) Added the INC_PR
3) Updated the RTOS version
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update AM65x SR2.0 prueth firmware to 02.02.09.03 that adds support for
100M HD mode.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This is temporary change to pick the 08.00.00.026 firmware from
ti-linux-firmware repos:
1) Using the ti-sci-fw to pick the latest firmware and support AUTOREV
in future
2) Kept the destination folder name same to avoid wide-spead changes to
other recipes. Since that will be changed as part of over-all clean-up
TODO:
1) Re-structure rtos firmware repo and update all dependent firmware recipes.
2) Fix the destination folder name to match src folder
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update u-boot recipe to be on the latest official upstream tag.
This introduces initial support for AM64x which works with v5.13
kernel tag.
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display,
GPU, dedicated safety island and security accelerators.
J721E EAIK supports the following interfaces:
* 4 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.0 Type-C port
* x3 USB 3.0 Type-A ports
* x1 PCIe M.2 E Key
* x1 PCIe M.2 M Key
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi compatible GPIO header
J721e EVM and EAIK uses the unified bootloader. Add j721e eaik dtb
for machine=j721e-evm
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
And lets work with the latest kernel and while at it bump the system up
to latest ti-upstream-tools repo to get:
* AM65x SR1.0 overlay support
* EFI configuration to allow for the eventual support
* Few more cleanups for new architectures that have popped in.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Commit 02a2433c ("ti-sci-fw: Update image gen to latest") switched to a
newer commit in k3-image-gen that also picked up TISCI firmware release,
However, does include a change where the SPL address changed.
This switch in address has been queued for upstream in a future release
(v5.14 + u-boot 2021.10) and current mainline formal tags do not support
this address change. As a result, we have a broken AM64x mainline
support.
Revert this specific change from k3-image-gen for mainline alone for
now.
NOTE: This uses ARAGO_BRAND=mainline which is NOT accurate for meta-ti
which is distro independent, hence without appropriate changes while
using alternate distros, this change will not take effect.
Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Just updating imggen to a configuration compatible with latest firmware
should not have been accepted, we should have ensured that firmware
commit has moved correspondingly as well. Fix the same, else we get a
broken system.
Fixes: 406f599822 ("ti-sci-fw: Update imggen to release 08.00.00.001 tag")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Upgrade optee-os to upstream 3.12.0 on dunfell branch.
upstream optee 3.13.0 tag has the following patches.
f50962e3 ta_dev_kit.mk: make sure that libutils is linked second time
73196b58 link.mk: implement support for libnames-after-libgcc variable
36e784f6 libutils: provide empty __getauxval() implementation
Hence removing from here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk build,
due to inconsistency of PDK releases vs Linux SDK releases vs different
SoCs.
Update to FW version: REL.CORESDK.08.00.00.20
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms, remove the
recipe and corresponding patches.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms. So the ivshmem
(inter VM shared memory) based UIO driver and test applications
cannot be build and are not required.
Remove the recipes for the same.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
update linux-firmware to latest which has sync from upstream linux-firmware main branch.
This commit also picks latest version of DisplayPort firmware v2.1.0
commit f99d6a1d579e ("linux-firmware: update firmware for mhdp8546")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
update image gen to latest.
This commit also picks AM64x boot critical fix.
commit e411dc16862b ("soc: am64x: Makefile: Move the SPL Load address to 0x70000000")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
Since the support for pm1 SOM with tps65917 PMIC is added in ti-linux-5.10.y by
commit dd97d0bbafb7 ("arm64: dts: ti: k3-j721e: Add support for pm1 SOM with tps65917 PMIC")
This patch adds the support back with the supported dtb.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following display overlays.
- k3-am654-evm-tc358876.dtbo
- k3-am654-evm-oldi-lcd1evm.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This patch adds overlay to support icssg1-dualemac
ie: 1 x CPSW3g ports and 2 x ICSSG1 ports configuration
overlay: k3-am642-evm-icssg1-dualemac.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces k3-j721e-common-proc-board-infotainment.dtbo overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Add prebuilt PRU Ethernet FW for am64xx-evm which is the same as
for AM65x SR2.0.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Added KERNEL_DTB_OVERLAY_SUPPORT to common ti-soc include. This fixes the issue
where the dtbs are build without symbols causing issue with overlays.
Please note this increases the size of the dtb for all platform
derived from ti-soc. So for custom boards disable it from local.conf to
reduce size.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
With U-Boot supporting both am64xx-evm and am64xx-sk with single
defconfig, there is not need for a new machine for am64xx-sk.
So, drop support for am64xx-sk machine.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
As a step towards unification for am64xx-evm and am64xx-sk,
start including am64xx-sk dtb for machine=am64xx-evm.
Once U-Boot merges support for unified bootloader, am64xx-sk
machine can be dropped.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Commit 159cdb159ad0 ("perf-tests: add bash into RDEPENDS (v5.12-rc5+)")
in upstream openembedded-core layer.
Copying over a snippet of description over:
Commit 1dc481c0b0cf perf test: Change to use bash for daemon test
in upstream kernel
Changes tools/perf/tests/shell/daemon.sh to be explicitly bash
(it was already required, but was just skipped on various
distros).
We add it into our RDEPENDS for perf-tests to fixup 5.12+
builds.
We already have relatively heavy RDEPENDS for perf tests (python3), so
adding bash into the RDEPENDS isn't signifcant even for older perf
builds that use the same recipe.
[OE patch by: Bruce Ashfield <bruce.ashfield@gmail.com>]
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Update u-boot recipe to be on the bleeding upstream tag.
While at it, also update the u-boot source url to point to the new
server as per [1].
While it may be redundant, lets document the usage of URI and
PROTOCOL for those, who (cough), may get tripped otherwise.
[1] a3bbd0b912
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
ReIntroduce AM65x SR1.0 Overlay as the support for it
is added in the ti-linux-5.10.y kernel now.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces overlays present current on ti-linux-5.10.y kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The update brings the fix for 5.10.x linux kernel.
commit c0039f1fec25 ("cmemk: Fix 5.10 build errors for non Keystone2 platforms")
commit 8aba20e20bf7 ("cmemk: Fix build errors for 5.10+ kernels")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit 816485e68430 ("Merge pull request #1 in DBG/dsptop from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit dd0c82fb5763 ("Merge pull request #1 in DBG/gdbc6x from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- dra7-evm-lcd-osd101t2045.dtb
- dra7-evm-lcd-osd101t2587.dtb
- dra71-evm-nand.dtb
- dra71-evm-lcd-auo-g101evn01.0.dtb
- dra72-evm-lcd-osd101t2045.dtb
- dra72-evm-lcd-osd101t2587.dtb
- dra72-evm-revc-lcd-osd101t2045.dtb
- dra72-evm-revc-lcd-osd101t2587.dtb
- dra76-evm-tfp410.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am57xx-evm-cam-ov10635.dtb
- am57xx-evm-reva3-cam-ov10635.dtb
- am571x-idk-lcd-osd101t2045.dtb
- am571x-idk-lcd-osd101t2587.dtb
- am572x-idk-lcd-osd101t2045.dtb
- am572x-idk-lcd-osd101t2587.dtb
- am574x-idk-lcd-osd101t2587.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am335x-icev2-prueth.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb, as they are not currently present on
ti-linux-5.10.y.
- keystone-k2g-evm-lcd.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove jailhouse overlay as it is not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The following dtb/o are not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
- ti/k3-j721e-proc-board-tps65917.dtb
- ti/k3-j721e-common-proc-board-infotainment.dtbo
- ti/k3-j721e-pcie-backplane.dtbo
- ti/k3-j721e-common-proc-board-jailhouse.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The eglplatform.h header is updated to account for deprecation of
MESA_EGL_NO_X11_HEADERS macro. Update srcrev to pick this change.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
The additional patch for ti-sgx-ddk-km remaps the arm-oe-linux-gnueabi prefix
to the arm-linux-gnueabihf preferred target. Same should be done for the
arm-poky-linux-gnueabi prefix.
Signed-off-by: Zan Dobersek <zan@falconsigh.net>
Reviewed-by: Gowtham Tammana <g-tammana@ti.com>
It appears common-csl-ip-rtos does not require ti-sysbios dependency to build,
but ti-pdk.bbclass adds it by default. While most of PDK-based components do
require ti-sysbios to be built from sources, it is safe to remove it from CSL,
reducing the dependency tree for special cases like PRU FW based on CSL, but
not needing ti-sysbios.
This only affects firmwares built from sources against PDK and CSL, not when
RTOS firmwares are delivered in binary form for newer K3 platforms.
Build-tested on am335x, am57xx, k2g and am65xx.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
update am64x rtos firmware to keep pinmux and control MMRs
remain unlocked now since linux needs this to be unlock.
this fix the USB and performance degradation issues.
am64xx: 07.03.00.19
Signed-off-by: Shiju Sivasankaran <shiju@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
IMAGE type and dependencies can easily be centralized to SoC include
file. This is necessary to make sure that we don't do the duplication
and having multiple places to fix up.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
wic and tar dependency on trusted firmware is wrong. It is u-boot build
that depends on trusted firmware deployment and is correctly handled by
u-boot recipe. No point in duplicating that dependency, so just clean it
all up.
Reported-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Lets keep things consistent by providing two possibilities for platforms
to pick from - legacy boot and multi-certificate boot.
In legacy boot, the base bootloader and system firmware are
maintained as separate binaries (tiboot3.bin and sysfw.itb).
In multi-certificate boot that newer K3 devices support, ROM is smarter
and can handle multiple x509 certificate based images: so we can strip
out the sysfw.itb and integrate it as part of tiboot3.bin itself. This
improves authentication and overall system boot times since we are now
able to boot both the system controller and the boot processor in
parallel.
We do have a scheme currently to identify the images necessary for boot
etc, but things are handled on a platform conf file basis. We can
improve that by introducing the pattern at the top level include and use
the relevant pattern in platforms as needed.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Remove duplicate machine-specific redefines of UBOOT_BINARY, UBOOT_IMAGE and
UBOOT_SYMLINK variables, as they are already defined with same values in the
common k3r5.inc file.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Fixes:
.../scripts/secure-binary-image.sh: line 69: openssl: command not found
.../scripts/secure-binary-image.sh: line 78: openssl: command not found
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
U-boot build process requires DM firmware to be signed for J7 HS.
It's better for ti-rtos-firmware package (that delivers DM firmware) to sign
it once and provide signed version to other packages, instead of U-boot needing
to re-sign it during build in staging location.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
OPTEEMACHINE name as defined in the optee_os project [1] for
j721e is k3-j721e.
This patch fixes the name to correct target.
[1]: 87613cf952
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
ti-upstream-tools[1] repository carries the overlays and defconfig
fragments that we don't wish to overload upstream kernel community with.
The reason for that being these are constantly on churn as our test
coverage increases etc. Currently we reuse the "BRANCH" variable to also
matchup with kernel and ti-upstream-tools repositories as well.
This can tend to be a little painful if we decide to start testing
various kernel configurations - RT etc.. So, lets just split out the
TOOLS_BRANCH separated from the branch we use for kernel. Even though
the branch remains the exact same at this point.
[1] https://git.ti.com/cgit/ti-linux-kernel/ti-upstream-tools/
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Add GNU Multiple Precision Arithmetic Library as a dependency for
mainline linux builds. These are necesary for kernel to handle gcc
plugins for builtins.h
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
The J7200/AM64 ti-sci-fw needs to be installed in the deploy
directory so that it can be packaged in Processor SDK bundle
This is required because the ti-sci-fw is needed in the
installer prebuilt-images in order to build the combined boot
image for J7200/AM64
Signed-off-by: Lucas Weaver <l-weaver@ti.com>
Update the image gen and linux-firmware commit SHAs so that
we pick v2021.01a sysfw and the applicable
DM update with following version
* 07.03.00.21 for J721E and J7200
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
update ti-rtos-metadata and ti-rtos-firmware recipes of meta-ti to
pick AM64x rtos firmware from mcu-plus-sdk instead of PDK.
Other devices such as AM65x, J7 continue to use fw from PDK.
Built and tested both IPC echo test applications - "rpmsg_client_sample”
& “rpmsg_char_simple”. Both tests passed for all remote R5F cores
on AM64x EVM
Signed-off-by: Shiju Sivasankaran <shiju@ti.com>
[praneeth@ti.com: rebase to dunfell/next]
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Boards like the beaglebone currently hardcode "u-boot" as a dependency
for the image and the wic format, and this prevents one from choosing
a different bootloader via:
PREFERRED_PROVIDER_virtual/bootloader = "non-u-boot-bootloader"
Depending on "virtual/bootloader" instead of "u-boot" fixes this.
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Between j7200 firmware tags 07.03.00.10 to 07.03.00.16
the downloadable weburl link changed
from *processor-sdk-rtos-jacinto7 to *processor-sdk-rtos-j7200.
This patch is to fix the recipe to pick the firmware from the
expected location on the new tag.
Fixes j7200 build error reported due to
77cdfa9f65 ("ti-rtos: Update metadata and versions for RTOS firmware")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
And lets work with the latest kernel
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Bump up our recipe version for ti-upstream-tools for updates in config
files needed for latest kernel
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2021.01 sysfw and the applicable
DM update with following version
* 07.03.00.12 for J721E
* 07.03.00.10 for J7200
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Add combined boot flow support for the AM64XX SK device.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
AM642 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM642 SoC. Add machine definition for SK board.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Update SRCREV to latest commit that includes AM64xx SK platform
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Latest versions of Linux kernel (5.10) and U-boot (2021.01) are not yet ready
for prime time in meta-ti and some features are still being migrated and causing
issues. The recipes are meant for development and not yet for production.
Normally selection of the version is done with PREFERRED_VERSION by the Distro
(e.g. Arago), but if not specified by a Distro (Poky, distroless, etc.), the
default is to use the latest version. Hence need to change the default to not
automatically pick the latest version that is not ready yet.
This can be removed/reverted once those versions are ready to be picked by
default.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2020.12a sysfw and the applicable
DM update on j7200 and j721e based on 07.02.00.10 tag
Signed-off-by: Dan Murphy <dmurphy@ti.com>
The 7200-hs-evm does not exist as a machine and if it did then this
directive should have been j7200-hs. So just remove it as it is
unneeded.
From: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2020.12 sysfw and the applicable
DM update on j7200 and j721e based on 07.02.00.05 tag
Dan Murphy - Removed am64xx PV over ride
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
As meta-arm has this version in master, but not in dunfell, temporarily overlay
corresponding patches locally - could be removed for the next release. Need to
alter FILESEXTRAPATHS for bbappend to locate local patches.
Since meta-arm/dunfell has 3.8-specific patches in SRC_URI, let's redefine it
completely to match 3.11-specific patch list in meta-arm/master.
Last, but not least, guard all upstream recipe varibales with "ti-soc" override
to only affect platforms in meta-ti, but not any other BSPs.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and sysfw commit SHAs so that am64x picks
v2020.12 version.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update SRCREV to pick latest that includes AM64X support
commit 65dd16b4e ("ti: k3: Introduce lite device board support")
adds support of AM64X platform in ti-atf branch.
This patch updates the SRCREV and also updates the BOARD to "lite" to
build for the mentioned platform.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Update the ti-rpmsg-char library to 0.3.0 version that enables
the support for the various R5F remote processors on AM64x SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update to v2.4 tag merge from upstream to keep TF-A in sync.
For major changes in trusted-firmware-a, See:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-4
TI specific fixups include:
- stub for shutdown (CPUs enter wfi)
- uart console is now configurable.
While at it, update to include PV_k3 as 2.4. We use PV_k3 instead of
PV since this allows meta-ti to not affect other platforms esp in a
multi-BSP configuration.
We also add LIC_FILES_CHKSUM_k3 to make sure that we don't let any
re-licensing in the project pass through unnoticed as that has to
be carefully examined for making sure we have all the right legal
compliance - There has been no change compared to previous versions,
but we introduce this as a protection in case there is a change in the
future.
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Suggested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
commit a6904f563f ("Remove redundant YYLOC global declaration")
is in ti-u-boot-2020.01 branch now.
Updating SRCREV of ti-u-boot-2020.01 to pick the patch from there.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Backport a patch from upstream to fix build on distros with gcc10+
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Use latest SRCREV on master branch to pick up all the
changes compliant with TIFS 2020.08b firmware.
The license CHKSUM also need to be updated due to a minor
change from http to https in the Copyright line.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the srcrev to pick the latest artifacts that fix some of the
redundant rpath warnings seen with Yocto.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Use latest SRCREV on master branch.
This adds support for resource management commands
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the ti-rpmsg-char library to 0.2.0 version that includes
an improvement to signal handling logic.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
The patch for supporting the general toolchain is pulled into the repo.
Removing it here from the recipe.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
This fixes problems during cross compile where it starts to peek into
build host's include and library paths and causes errors with clang and
QA warnings with gcc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Add the initial recipes for building the ti-rpmsg-char package.
The library and examples are built using two separate recipes
in ti-rpmsg-char_git.bb and ti-rpmsg-char-examples_git.bb.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
latest OE-core does not promote using trailing slash to make pseudo's
life easier
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update md5 README checksum for u-boot. No actual licensing changes.
Change is with u-boot commit
35bd70c5107f0 ("Convert CONFIG_SPLASH_SCREEN et al to Kconfig")
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Recipe in meta-arm doesn't use OPTEEFLAVOR, but optee-os Makefile can extract
it from OPTEEMACHINE.
Keep OPTEEFLAVOR for legacy platforms - used for HS signing in the output name.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
It was originally residing in meta-arago due to earlier dependency on meta-optee
layer from meta-linaro. Now optee is in meta-arm and this code can move to meta-ti.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the firmware to version 3.1.4
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the firmware to version 5.3.9
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update SRCREV to pick the latest artifacts. The GL headers are excluded
in the artifacts instead of it in the recipe.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk
Aldo drop build for k2g as firmwares are not yet available.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update the hsr/prp firmwares to latest that includes support for
timestamping rx packets. Unfortunately version number is not
incremented for this update.
Also rename the bb file to add PV in it.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Rename gcc-arm-none-eabi to gcc-arm-baremetal.
As meta-arm now provides baremetal gcc-arm-none-eabi version 9, and due to layer
priorities, let's rename gcc-arm-none-eabi to gcc-arm-baremetal to force picking
the right version for RTOS builds.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As part of replacing hard-coded /lib with ${base_libdir}, rpmsg_lib.lib was
also mistakenly moved from ${libdir} to ${base_libdir}, which is incorrect
and breaks other recipes, when they try to link against this library from
${libdir}.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
j7200-evm supports virtualization with Jailhouse hypervisor.
To use Jailhouse, kernel needs to boot with an additional
DTB overlay. Include this in the list of DTBs for the machine.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Initialize the cell names and console for the j7200-evm machine
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
capable dual Cortex-R5F MCUs and a Centralized Device Management and
Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and
I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
management.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
AM3/4/5 PREUTH driver now supports HSR/PRP offload driver. So include
these firmwares for the required SoCs.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This patch adds recipe for hsr/prp firmware on am3/4/5 SoCs. The binary
files are located on ti-linux-firmware.git. This is a forward port of
the recipe from processor sdk 6.3
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
IPUMM build is showing linker error for a function
ti_sdo_ce_utils_syscbuf_SysCBuf_Module_startup__E with latest xdc tool.
A dummy version of this function is added in ipumm as a temporary solution.
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating the srcrev to pick the latest changes which adds an unittest.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ti-sci-fw builds multiple config variants via multiconfig and the number
is expected to grow. Provide a recipe to package a single set of sources
for MAINMACHINE.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* libjli.so and libawt_xawt.so are now detected within the
ti-xdctools packages.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
A user of the meta-ti layer may choose to use a combination
of the machines herein with another kernel, not necessarily
the one from the machine definition.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
AM57xx PRUETH driver now support switch mode and needs prusw-fw to
support switch mode. Therefore include PRU switch firmware for AM57xx builds.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating srcrev to pick latest libs
- Support for surfaceless EGL display token
- RGBA4444 format support as window surface
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
rpmsg_kdrv_switch kernel module is implicitly dependent on the
for virtual ethernet driver. Ensure that the module is auto loaded
by default foe j7-evm platfom.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Full build of all examples is not needed. Update the
recipe to build only selected examples.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
May need to limit this to HS platforms in the future, but since there's
no SOC_FAMILY defined, listing them individually is rather painful now.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
While here format it a little bit to make
mailing list address stand out
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
uio_send and uio_read are the applications used for communication
between different Virtual Machines using the ivshmem protocol.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Latest upstream jailhouse uses ttyS3 as console.
Update the conf file so that this reflects correctly in the
tiny rootfs.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Latest upstream jailhouse uses ttyS3 as the console for
inmate cell. Update the recipe to pass the correct cmdline.
Override only for j7-evm
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The License checksum has changed due to version number change, but the
license itself has not changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Also correct ti-cgt-arm to not reference Hewlett-Packard, only Patrick-Powell,
according to included SPDX document.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Jailhouse 0.12 does not need to define custom config flags.
Remove the steps to copy the config from do_configure task
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As it happens, ion-tests requires gtest from by meta-oe, but meta-ti has no
dependency on meta-oe. Unfortunately this was overlooked when all ion recipes
were migrated to meta-ti. Fix this by moving just ion-tests back.
Cc: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license as such has not changed, but moved to a License file which
is not expected to change frequently
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The following is the main change done:
Use FW_RSC_ADDR_ANY for places where memory needs to be allocated
dynamically like RSC_CARVEOUT and vdev resource entries
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update srcrev to pick the fix for rt linux build issue.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
These boards have SGX GPUs but do not build as this recipe is not
compatible with them, add compatibles for these machines.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This also allows us to do two extra tasks so lets do them here:
- Add support back for Beagleboard and Pandaboard
- Remove plugins workaround as SO names are handled correctly now
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As multiprocmgr is a user-space app and should only use uapi headers, drop
extra -I for the kernel headers. Patch out any assumptions of direct access
to the kernel headers.
Cc: Suman Anna <s-anna@ti.com>
Cc: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update branch for zeus release. There is no change to srcrev.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update the branch id to pick the sources relevant to k5.4.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
For now only j721e_evm is supported when building for j7-evm
MACHINE target. Limit the BOARDS list in this case to what is
supported.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
python-argparse is not available in oe-core, but meta-python provides a
drop-in replacement python3-configargparse, if needed. meta-ti does not
depend on meta-python for now - can be adjusted in the distro layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SUBDIRS has been deprecated for a while and as of k5.4 no longer works.
Use M= instead.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This compresses better and most machines use this now, lets switch these
remaining machines over.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This package adds the xorg.conf needed for some Xorg servers. Xorg does
not need these anymore as the automatic configuration will handle this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This program uses many software components that are not recommended
anymore making it a bad example. The original source repo is gone.
It has dependencies on very old kernel versions. Lastly it doesn't
look to have been built by anyone in a long time. Lets remove this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode recipe
with Makefiles using CROSS_COMPILE instead of hard coding
aarch64-linux-gnu as the cross compiler.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode with improvements
to V4L2 decoder stream restart and slice map calculation, and
encoder performance profiling options.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Link the git directory into the recipe's work directory to provide
git history and commit information for recipes that may need it.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* dualemac: fix to drop PTP sync msgs from unknown master
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Updated the Software Manifest from 5.0 -> 6.0 to account for new processors,
etc.
- Updated to PRU Software Support Package v5.6.0
updated manifest
added PRU Getting Started Labs
improved several examples
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
CMEM memory block for bbai should be 402MB to allow full EVE
acceleration and DSP use, but accounting for the BBAI only having
1GB of RAM.
Signed-off-by: Caleb Robey <c-robey@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Changing BB_NUMBER_THREADS between successive builds causes a "basehash
value changed" error. Additionally, using BB_NUMBER_THREADS to pass a
number of processes to run to xdc is wrong: PARALLEL_MAKE is the correct
variable to use.
Fix both problems by using oe.utils.parallel_make_argument() to obtain the
number of processes to run from PARALLEL_MAKE.
Fixes:
ERROR: When reparsing .../meta-ti/recipes-ti/ipc/ti-ipc-rtos_git.bb.do_configure, the basehash value changed from 63897a188012cedde03f756b5dbbfa70 to 13b80bf4f4327c367bd201eb4aa32ad7. The metadata is not deterministic and this needs to be fixed.
ERROR: When reparsing .../meta-ti/recipes-ti/ipc/ti-ipc-rtos_git.bb.do_compile, the basehash value changed from 2fb59a7db2a2f69d2c25c06c1b6a4245 to 314c664cc040afae2800fcc378dd9ae0. The metadata is not deterministic and this needs to be fixed.
Steps to reproduce:
BB_NUMBER_THREADS="3" bitbake ti-ipc-rtos ti-ipc-examples-linux
BB_NUMBER_THREADS="4" bitbake -c cleansstate osal-rtos
BB_NUMBER_THREADS="5" bitbake ti-ipc-rtos ti-ipc-examples-linux
Reported here: https://e2e.ti.com/support/processors/f/791/p/825142/3059419
Reported-by: Matthew McKee (e-mail unknown)
Suggested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is allow user to override them in their configuration
Signed-off-by: Ankur Tyagi <ankur.tyagi@gallagher.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* LIC_FILES_CHKSUM changed to due to a corresponding change in the
S directory.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Recently individual components and LLD sources have been combined
into a single PDK repo. Use this class to specify the common source.
Also use this class to keep the sources separate from each other when
building. This keeps the build identical to previous recipes while
keeping control on interdependencies.
Similar to gcc-source, use the ti-pdk-source recipe to unpack the
sources into a "work-shared" area. Then hard-link only the necessary
files into a recipe's WORKDIR.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is the initial step toward Mesa-based EGL/GLES libraries which
support all the required EGL 1.5 extensions. We plan to provide a
Mesa-pvr recipe to build Mesa from source and SGX/DDK patches where
ti-sgx-ddk-um shall provide the EGL/GLES plugins only at the next step.
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There was a typo in machine description - AM435x instead of AM335x
Reported-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
IPC-LLD provides the low-level RPMSG based
communication interface between various cores
Signed-off-by: Santosh Jha <sjha@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
It rdepends on jailhouse package which is already marked at ti-soc
compatible only, so in a multi-BSP setup it ends up breaking builds
ERROR: Nothing RPROVIDES 'jailhouse' (but
/home/jenkins/oe/world/yoe/sources/meta-ti/recipes-bsp/ivshmem-uio/ivshmem-uio-driver_git.bb
RDEPENDS on or otherwise requires it)
jailhouse was skipped: incompatible with machine qemux86-64 (not in COMPATIBLE_MACHINE)
NOTE: Runtime target 'jailhouse' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['jailhouse']
NOTE: Runtime target 'ivshmem-uio-driver-dev' is unbuildable,
removing...
Missing or unbuildable dependency chain was: ['ivshmem-uio-driver-dev', 'jailhouse']
ERROR: Nothing RPROVIDES 'ivshmem-uio-driver' (but /home/jenkins/oe/world/yoe/sources/meta-ti/recipes-bsp/ivshmem-uio/ivshmem-uio-driver_git.bb RDEPENDS on or otherwise requires it)
No eligible RPROVIDERs exist for 'ivshmem-uio-driver'
NOTE: Runtime target 'ivshmem-uio-driver' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['ivshmem-uio-driver']
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The rpmsg-echo firmwares are not supported for Tx_PRU cores on
J721E SoCs, these cores only support the Halt images. So suppress
the build warnings around Tx_PRU rpmsg-echo firmwares by limiting
the default ALTERNATIVES and updating the list for just the
pru-icss-halt package.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
A firmware binary for guest is added to source repo, updating the
srcrev to pick the latest changes.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Erick Narvaez <e-narvaez@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is external kernel module which enables userspace io over the
Jailhouse ivhsmem (inter VM shared memory)
This driver is useful to test the inter VM communication.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode with fixes
for debug warnings.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes
beaglebone-capes-1.0-r4 do_populate_lic: ${COREBASE}/LICENSE is not a valid license file, please use '${COMMON_LICENSE_DIR}/MIT' for a MIT License file in LIC_FILES_CHKSUM. This will become an error in the future
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- New versions uses CMake and extra modules
- Correct detection of nm/ranlib/ar for LTO
- Fix build with clang/libc++
- depend on python3, needed during build
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum changed due to the version, but the license itself
has not changed since the last release (1.1.0)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated git commit & version number for PRU Software Support Package.
Builds J721E Halt and RPMsg examples and packages them into lib/firmware/pru
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Support for new CMA linux mem area is added, updating srcrev to pick
the latest changes.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode with latest
bug fixes.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Updated the ethernet Fw to use PDK memory map
so that it can run along with IPC apps in
CoreSDK.
* Added stripped version of the firmware
Signed-off-by: Santhana Bharathi <santa@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
`__get_order()` API got changed to `get_order()` in the newer kernel
4.19.73. Updating the srcrev to pick the corresponding fix in the
driver.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The fix from Khem Raj to use extern "C" instead of __BEGIN_DECL/__END_DECL macros
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The source repo has been updated with latest nulldrmws artifacts and
debug binaries. Updating srcrev to pick the latest changes.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The videnc-test-app provides the video encoder test app
(tienc_encode) for j7-evm.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
After libgbm was moved into the ti-sgx-ddk-um project the recipe for
libgbm was deleted, this patch was left over, remove it here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode which
includes updates for decoder and addition of encoder.
Also update the recipe to build the encoder module.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
OE-built internal toolchain doesn't use "-gnueabihf" suffix and instead uses
"-gnueabi" for both softfp and hardfp.
For now we only support hardfp (user-space binaries are only available in
hardfp), but would be nice to check for "callconvention-hard" before applying
the patch.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* If both INITRAMFS_IMAGE and JH_RAMFS_IMAGE are unset, variables fail to
expand, which leads to dependency errors.
* Passing full CC variable ensure all options are specified, especially
--sysroot one for internal toolchains.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating srcrev to pick latest fixes in the libs
- GL header updates to include latest extension definitions
- Fixes for NV12 format
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Virtualization support is added to the driver. Updating srcrev here to
pick the relevant sources.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This file was shipped as part of the DDK, but was also supplied by
libwayland so it was deleted here. This file has been removed from
the DDK, so deleting the file manually here is no longer needed.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
No one in-tree depends on this anymore. This used to be the name of the
package so this was kept here for several years for backwards
compatibility. Remove this from PROVIDES.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Although not needed for the IMG default EGL implementation this is needed
when building the Mesa EGL version of the DDK.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Although not needed for the IMG default EGL implementation libexpat
is needed when using the Mesa EGL version.
While here s/libudev/udev as 'libudev' is package shipped as part of the
eudev project, but we use systemd, so we actually depend on 'udev'.
Move the PACKAGE_ARCH and PR defines to a more natural spot that also
lines up with the RGX version of recipe for easier diffs.
One thing we could have done is remove the DEPENDS line. We do not have
any build dependencies as these are pre-made library binaries, but I use
the package rootfs generated by bitbake to build the binaries locally,
so leave it for now.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The GBM library is tightly coupled with the system graphics systems,
other hardware GPU vendors (including our Rogue DDK) and Mesa all deploy
a version of the library as part of their GPU driver. We SGX does the
same. This should ease integration for us as we now don't rely on a
separate project for this library and our deployment strategy can match
across Mesa/RGX recipes, allowing for better re-use of common components.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Configure the linux-demo to use a ramfs for the linux inmate.
* Using JH_RAMFS_IMAGE, this can be set in some global conf.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Create a package containing the jailhouse tools which are used to work
with the cells and inmates. This recipe provides a good example for
using the jailhouse-cell-linux tool.
The tools require the pyjailhouse python modules, so package them as
well.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Correcting the corelist. There is no mpu2_x or mpu3_x instead they
should be mcu2_x/mcu3_x which is present in j7-evm
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There is no mpu2_1,mpu3_0,mpu3_1 for j7-evm. They should have been
mcu2_1,mcu3_0 and mcu3_1 respectively.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The default TI_PDK_LIMIT_CORES set in conf/machine/includes/am65xx.inc
doesn't contain mcu1_1 which sciclient supports for am65x. Hence
appending it in the recipe.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* extend to am65xx family
* and correct am65xx cell and inmate filenames.
* remove earlycon bootargs for am65xx
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This tool is not publically fetchable yet and requires pre-downloading
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The checksum has changed due to version & date, the license has not
changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Previous commit, while adding support for another platform, extended
ALTERNATIVE variable (which is package-specific) with machine overrides,
accidentally dropping the necessary ${PN} suffix in the process.
Restore it to make update-alternatives system work again.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The PV has not changed as this is an incremental commit id update
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated IPC/LLD firmware binaries for AM65xx and
J721E to support WFI state for proper remote core
power-down and power-up.
Signed-off-by: Jonathan Bergsagel <jbergsagel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The License Checksum has changed due to version, the licenses have not
changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Use IPC/LLD based IPC echo test binaries as an
alternative for AM65X Linux IPC testing.
Updated location of J721E firmware binaries as well,
with latest IPC/LLD commit.
Signed-off-by: Jonathan Bergsagel <jbergsagel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum changed due to version, but the licenses haven't
changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Please note that LIC CHKSUM has changed due to version change.
The licenses themselves have not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Please note that the LIC_CHECKSUM due to date and version.
The License itself has not changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ti_bin_do_unpack() detects the absence of the required 32 bit libraries,
but only emits a warning. Later on the build will fail with a mysterious
error.
Fail immediately so the user can clearly read the error message and the
(always appreciated) instructions on how to fix the problem.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Using clang as default compiler fails to build these
since these packages explicitly asks for gcc as compiler
this ensures that we meet that demand
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This needs to be ported and tested with non-TI SOCs
its better to limit this to just TI SOCs as of now
this makes sure that meta-ti can be used in a multi-BSP
distro
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes
WARNING: python should use 4 spaces indentation, but found tabs in jailhouse_git.bb, line 85
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes build with non arm architectures
Subprocess output:x86_64-yoe-linux-strip: Unable to recognise the format of the input file `TOPDIR/build/tmpfs/work/qemux86_64-yoe-linux/ti-display-sharing-fw/00.09.00.00-gitAUTOINC+4a86f16df9-r0/sysroot-destdir/lib/firmware/ti-display-sharing-j721e.bin'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* rpmsg_client_sample is a test module and should not be autoloaded
* Both k3_r5 and k3_dsp remoteproc modules depend on virtio_rpmsg_bus
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Builds the Jailhouse kernel module, hypervisor binaries
and all the cell configs for root cell and other demos.
Generate the linux-demo loader script without initramfs.
Supports am65x and j7-evm machines
[nikhil.nd@ti.com: Update for public trees]
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Reviewed-by: Subhajit Paul <subhajit_paul@ti..com>
Tested-by: Subhajit Paul <subhajit_paul@ti..com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Adds the R5 and DSP echo_test firmware binaries to be
used for testing Linux IPC on J721E SOCs.
Signed-off-by: Jonathan Bergsagel <jbergsagel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode which
fixes compilation warnings/errors with RT-Linux.
Also add "COMPATIBLE_MACHINE" to the recipe.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* add firmware for the R5F core to test the detection of watchdog
timeout events to trigger SOC reset though DMSC.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
We will start supporting Wayland window system. It is good to have nulldrmws as
a debug option. GPU driver recipe already support window system option.
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The prueth-fw-am65xx provides the same firmware but built from
sourecs.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The sources for the am65xx prueth-fw are located in within the
emac-lld sources.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The emac-lld also contains sources for the prueth-fw on am65xx.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
LIC_FILES_CHECKSUM now calculates checksum on the copyright, skipping
the year which can change. The checksum contents itself have not changed
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add the recipe for the video decoder driver.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add the firmware packaging recipe for the video decoder
for J721E devices.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Restore max_leb_cnt so that the UBI/UBIFS fits into the board flash
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update mdio register entries to use the full address
* For AM571x, remove the entries which are available after using DT overlay
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The J721E SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration to enable lower system costs
of automotive applications such as infotainment, cluster, premium
Audio, Gateway, industrial and a range of broad market applications.
This SoC is designed around reducing the system cost by eliminating
the need of an external system MCU and is targeted towards ASIL-B/C
certification/requirements in addition to allowing complex software
and system use-cases.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, three clusters of lockstep
capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA),
C7x floating point Vector DSP, Two C66x floating point DSPs.
* 3D GPU PowerVR Rogue 8XE GE8430
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
and Motion Processing Accelerator (DMPAC)
* Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual
PRUs and dual RTUs
* Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and
up to two DPI interfaces.
* Integrated Ethernet switch supporting up to a total of 8 external ports in
addition to legacy Ethernet switch of up to 2 ports.
* System MMU (SMMU) Version 3.0 and advanced virtualisation
capabilities.
* Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems,
16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI,
I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
* Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
management.
* Configurable L3 Cache and IO-coherent architecture with high data throughput
capable distributed DMA architecture under NAVSS
* Centralized System Controller for Security, Power, and Resource
Management (DMSC)
See J721E Technical Reference Manual (SPRUIL1, May 2019)
for further details: http://www.ti.com/lit/pdf/spruil1
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add to the dependencies set in ti-pdk.bbclass so that we get tools
such as XDC.
* Set the edma3-lld path so the makefile can push it onto XDCPATH.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The checksum changed due to version & year changes. The licenses remain
the same
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* prueth-fw and icss-emac-lld shared the same source repo, so make
them share the same inc file which specifies the sources.
* Add the FW versions to the icss-emac-lld.inc so that there can be
a single location for updates.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As this is a pre-built package:
* Skip the build-deps and file-rdeps checks.
* Disable package debug split.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The checksum has been changeded due to the version string and copyright
year. Licenses themselves have not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum change is due to version number. License has not
been changed. However Patrick powell license which was missing earlier
has been added now.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum update is due to the version number update. The
licenses have not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum changed due to the version and also because Hewlett Packard
license is no longer applicable.
The Patrick Powell license which was present earlier too was not mentioned in
the recipe, now it has been explicitly mentioned as well.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum change is due to the copyright year and version.
The license itself has not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
License has been changed to include a few new licenses such as
Synopsis,Joel Sherrill,Rich Felker,Otto Moerbeek,embedded brains Gmbh,
Regents of Univ of California, Digital Equipment Corporation, John
Baldwin,WIDE project, Jeffrey Roberson, ARM Ltd, NetBSD,Michael R Nelly,
and CYGWIN license
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This upgrade brings in the following updates:
* MPEG2 Decoder Update to 01.00.18.01 from 01.00.17.01
* VC1 Decoder Update to 01.00.02.08 from 01.00.02.07
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
