trusted-firmware-a: fix build error when using ccache

When ccache is enabled trusted-firmware-a recipe fails with this
error message:

    make: *** No rule to make target 'aarch64-poky-linux-gcc'. Stop.

ccache prefix CC variable with 'ccache' word before compiler. Because
there are no quotes assigned to CC, only 'ccache' is assigned. The
compiler becomes a make target, producing the build error.

Add single quotes to LD is a good measure to prevent this kind of error.

Signed-off-by: Javier Tia <javier.tia@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>

.gitignore

@@ -0,0 +1 @@
+__pycache__

.gitlab-ci.yml

@@ -1,35 +1,68 @@
-# Use our custom Crops-derived image
-image: $CI_REGISTRY/$CI_PROJECT_NAMESPACE/yocto-builder:master
+image: ghcr.io/siemens/kas/kas:3.2
+
+variables:
+  CPU_REQUEST: ""
+  DEFAULT_TAG: ""
+  # These are needed as the k8s executor doesn't respect the container entrypoint
+  # by default
+  FF_USE_LEGACY_KUBERNETES_EXECUTION_STRATEGY: 0
+  FF_KUBERNETES_HONOR_ENTRYPOINT: 1
 
-  # First do a common bootstrap, and then build all the targets
 stages:
   - prep
-  - bootstrap
   - build
 
 # Common job fragment to get a worker ready
 .setup:
+  tags:
+    - $DEFAULT_TAG
   stage: build
+  interruptible: true
   variables:
     KAS_WORK_DIR: $CI_PROJECT_DIR/work
     KAS_REPO_REF_DIR: $CI_BUILDS_DIR/persist/repos
     SSTATE_DIR: $CI_BUILDS_DIR/persist/sstate
     DL_DIR: $CI_BUILDS_DIR/persist/downloads
     BB_LOGCONFIG: $CI_PROJECT_DIR/ci/logging.yml
+    TOOLCHAIN_DIR: $CI_BUILDS_DIR/persist/toolchains
+    IMAGE_DIR: $CI_PROJECT_DIR/work/build/tmp/deploy/images
+    TOOLCHAIN_LINK_DIR: $CI_PROJECT_DIR/work/build/toolchains
   before_script:
     - echo KAS_WORK_DIR = $KAS_WORK_DIR
     - echo SSTATE_DIR = $SSTATE_DIR
     - echo DL_DIR = $DL_DIR
-    - mkdir --verbose --parents $KAS_WORK_DIR $KAS_REPO_REF_DIR $SSTATE_DIR $DL_DIR
+    - rm -rf $KAS_WORK_DIR
+    - mkdir --verbose --parents $KAS_WORK_DIR $KAS_REPO_REF_DIR $SSTATE_DIR $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+    # Must do this here, as it's the only way to make sure the toolchain is installed on the same builder
+    - ./ci/get-binary-toolchains $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+    # This can be removed with Kas 3.2
+    - sudo apt-get update && sudo apt-get install --yes python3-subunit
 
 # Generalised fragment to do a Kas build
 .build:
   extends: .setup
+  variables:
+    KUBERNETES_CPU_REQUEST: $CPU_REQUEST
   script:
-  - KASFILES=$(./ci/jobs-to-kas $CI_JOB_NAME)
-  - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
-  - kas build $KASFILES
-  - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
+    - KASFILES=$(./ci/jobs-to-kas "$CI_JOB_NAME")
+    - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
+    - kas build $KASFILES
+    - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
+  artifacts:
+    name: "logs"
+    when: on_failure
+    paths:
+      - $CI_PROJECT_DIR/work/build/tmp/work*/**/temp/log.do_*.*
+
+# Workaround for Zephyr not currectly handling TESTIMAGE_AUTO
+.build_and_test:
+  extends: .setup
+  script:
+    - KASFILES=$(./ci/jobs-to-kas "$CI_JOB_NAME")
+    - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
+    - kas build $KASFILES
+    - kas build $KASFILES -c testimage
+    - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
 
 
 #
@@ -39,57 +72,69 @@ update-repos:
   extends: .setup
   stage: prep
   script:
-  - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
-
-
-#
-# Bootstrap stage, bootstrap and machine coverage
-#
-
-# Build a number of native tools first to ensure the other builders don't race
-# over them
-n1sdp/bootstrap:
-  extends: .build
-  stage: bootstrap
-
-# What percentage of machines in the layer do we build
-machine-coverage:
-  stage: bootstrap
-  script:
-  - ./ci/check-machine-coverage
-  coverage: '/Coverage: \d+/'
-
+    - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
 
 #
 # Build stage, the actual build jobs
 #
+# Available options for building are
+#  TOOLCHAINS: [gcc, clang, armgcc, external-gccarm]
+#  TCLIBC: [glibc, musl]
+#  VIRT: [none, xen]
+#  TESTING: testimage
 
 corstone500:
   extends: .build
+  parallel:
+    matrix:
+      - TESTING: testimage
+  tags:
+    - x86_64
 
-corstone700-fvp:
+corstone1000-fvp:
   extends: .build
+  parallel:
+    matrix:
+      - TESTING: [testimage,tftf]
+  tags:
+    - x86_64
 
-corstone700-mps3:
+corstone1000-mps3:
   extends: .build
 
 fvp-base:
   extends: .build
+  parallel:
+    matrix:
+      - TESTING: testimage
+  tags:
+    - x86_64
 
 fvp-base-arm32:
   extends: .build
-
-fvp-base-arm32/external-gcc-arm32:
-  extends: .build
+  parallel:
+    matrix:
+      - TOOLCHAINS: [gcc, external-gccarm]
+        TESTING: testimage
+  tags:
+    - x86_64
 
 fvp-baser-aemv8r64:
   extends: .build
+  parallel:
+    matrix:
+      - TESTING: testimage
+  tags:
+    - x86_64
+
+fvps:
+  extends: .build
 
 gem5-arm64:
   extends: .build
-
-gem5-arm64-xen:
-  extends: .build
+  parallel:
+    matrix:
+      - VIRT: [none, xen]
 
 gem5-atp-arm64:
   extends: .build
@@ -99,12 +144,16 @@ generic-arm64:
 
 juno:
   extends: .build
-
-juno/clang:
-  extends: .build
+  parallel:
+    matrix:
+      - TOOLCHAINS: [gcc, clang]
+        FIRMWARE: [none, edk2]
 
 microbit-v1:
-  extends: .build
+  extends: .build_and_test
+  parallel:
+    matrix:
+      - TESTING: testimage-zephyr
 
 musca-b1:
   extends: .build
@@ -114,79 +163,115 @@ musca-s1:
 
 n1sdp:
   extends: .build
-
-n1sdp/armgcc:
-  extends: .build
+  parallel:
+    matrix:
+      - TOOLCHAINS: [gcc, armgcc]
 
 qemu-cortex-a53:
   extends: .build
 
-qemuarm:
+qemu-cortex-m3:
+  extends: .build_and_test
+  parallel:
+    matrix:
+      - TESTING: testimage-zephyr
+
+qemu-cortex-r5:
   extends: .build
 
-qemuarm64-sbsa:
+qemu-generic-arm64:
   extends: .build
+  parallel:
+    matrix:
+      - TOOLCHAINS: [gcc, clang]
+        TESTING: testimage
 
 qemuarm64-secureboot:
   extends: .build
+  parallel:
+    matrix:
+      - TOOLCHAINS: [gcc, clang]
+        TCLIBC: [glibc, musl]
+        TESTING: testimage
 
-qemuarm64-secureboot/clang:
+qemuarm64:
   extends: .build
+  parallel:
+    matrix:
+      - VIRT: xen
 
-qemuarm64-secureboot/clang/musl:
-  extends: .build
-
-qemuarm64-secureboot/musl:
+qemuarm:
   extends: .build
+  parallel:
+    matrix:
+      - TOOLCHAINS: [gcc, clang]
+        TESTING: testimage
+      - VIRT: xen
 
 qemuarmv5:
   extends: .build
+  parallel:
+    matrix:
+      - TESTING: testimage
 
 sgi575:
   extends: .build
 
 tc0:
   extends: .build
+  tags:
+    - x86_64
 
+tc1:
+  extends: .build
+  tags:
+    - x86_64
 
-#
-# Utility tasks, not executed automatically
-#
+toolchains:
+  extends: .build
 
-# Report on disk usage
-usage:
+selftest:
   extends: .setup
-  stage: prep
-  when: manual
   script:
-  - du -h -s $DL_DIR $SSTATE_DIR $KAS_REPO_REF_DIR
+    - KASFILES=./ci/qemuarm64.yml:./ci/selftest.yml
+    - kas shell --update --force-checkout $KASFILES -c 'oe-selftest --num-processes 1 --run-tests runfvp'
 
-delete-dl-dir:
+# Validate layers are Yocto Project Compatible
+check-layers:
   extends: .setup
-  stage: prep
-  when: manual
   script:
-  - rm -rf $DL_DIR/*
+    - kas shell --update --force-checkout ci/base.yml:ci/meta-openembedded.yml --command \
+      "yocto-check-layer-wrapper $CI_PROJECT_DIR/$LAYER --dependency $CI_PROJECT_DIR/meta-* $KAS_WORK_DIR/meta-openembedded/meta-oe --no-auto-dependency"
+  parallel:
+    matrix:
+      - LAYER: [meta-arm, meta-arm-bsp, meta-arm-toolchain, meta-gem5]
 
-delete-repo-dir:
+pending-updates:
   extends: .setup
-  stage: prep
-  when: manual
+  artifacts:
+    paths:
+      - update-report
   script:
-  - rm -rf $KAS_REPO_REF_DIR/*
+    - rm -fr update-report
+    # This configuration has all of the layers we need enabled
+    - kas shell ci/gem5-arm64.yml --command \
+      "$CI_PROJECT_DIR/scripts/machine-summary.py -t report -o $CI_PROJECT_DIR/update-report $($CI_PROJECT_DIR/ci/listmachines.py meta-arm meta-arm-bsp meta-gem5)"
+  # Do this on x86 whilst the compilers are x86-only
+  tags:
+    - x86_64
 
-# Wipe out old sstate
-prune-sstate:
+# What percentage of machines in the layer do we build
+machine-coverage:
   extends: .setup
-  stage: prep
-  when: manual
   script:
-  - find $SSTATE_DIR -type f -atime +30 -delete
+    - ./ci/check-machine-coverage
+  coverage: '/Coverage: \d+/'
 
-# Delete all sstate
-delete-sstate:
+metrics:
   extends: .setup
-  stage: prep
-  when: manual
+  artifacts:
+    reports:
+      metrics: metrics.txt
   script:
-  - rm -rf $SSTATE_DIR/*
+    - kas shell --update --force-checkout ci/base.yml --command \
+      "$CI_PROJECT_DIR/ci/patchreview $CI_PROJECT_DIR/meta-* --verbose --metrics $CI_PROJECT_DIR/metrics.txt"

README.md

@@ -1,23 +1,46 @@
 Introduction
 ------------
-This repository contains Arm layers for OpenEmbedded
+This repository contains the Arm layers for OpenEmbedded.
 
-meta-arm:
-	This layer provides support for general recipes for the Arm
-	architecture.  Anything that's not needed explicitly for BSPs, the IOTA
-	distribution, or destined to be upstreamed belongs here.
+* meta-arm
 
-meta-arm-bsp:
-	This layer provides support for Arm reference platforms
+  This layer contains general recipes for the Arm architecture, such as firmware, FVPs, and Arm-specific integration.
 
-meta-arm-iota:
-	This layer provides support for Arm's IOTA Linux Distribution
+* meta-arm-autonomy
 
-meta-arm-toolchain:
-	This layer provides support for Arm's GNU-A toolset releases
+  This layer is the distribution for a reference stack for autonomous systems.
 
-meta-arm-autonomy:
-    This layer provides a reference stack for autonomous systems.
+* meta-arm-bsp
+
+  This layer contains machines for Arm reference platforms, for example FVP Base, N1SDP, and Juno.
+
+* meta-arm-toolchain
+
+  This layer contains recipes for Arm's binary toolchains (GCC and Clang for -A and -M), and a recipe to build Arm's GCC.
+
+* meta-atp
+
+  This layer contains recipes for the Adaptive Traffic Generation integration into meta-gem5.
+
+* meta-gem5
+
+  This layer contains recipes and machines for gem5, a system-level and processor simulator.
+
+
+Other Directories
+-----------------
+
+* ci
+
+  This directory contains gitlab continuous integration configuration files (KAS yaml files) as well as scripts needed for this
+
+* kas
+
+  This directory contains KAS yaml files to describe builds for systems not used in CI
+
+* scripts
+
+  This directory contains scripts used in running the CI tests
 
 Contributing
 ------------

ci/armgcc.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
 
 local_conf_header:
   cc: |
-    GCCVERSION = "arm-10.2"
+    GCCVERSION = "arm-11.2"

ci/base.yml

@@ -1,11 +1,11 @@
 header:
-  version: 9
+  version: 11
 
 distro: poky
 
 defaults:
   repos:
-    refspec: hardknott
+    refspec: kirkstone
 
 repos:
   meta-arm:
@@ -22,23 +22,29 @@ repos:
 
 env:
   BB_LOGCONFIG: ""
+  TOOLCHAIN_DIR: ""
 
 local_conf_header:
   base: |
-    CONF_VERSION = "1"
-    PACKAGE_CLASSES = "package_ipk"
-    LICENSE_FLAGS_WHITELIST += "armcompiler"
-    PACKAGECONFIG_remove_pn-qemu-system-native = "gtk+ sdl"
+    BB_SERVER_TIMEOUT = "60"
+    CONF_VERSION = "2"
     BB_NUMBER_THREADS = "16"
     PARALLEL_MAKE = "-j16"
+    LICENSE_FLAGS_ACCEPTED += "Arm-FVP-EULA"
+  setup: |
+    PACKAGE_CLASSES = "package_ipk"
+    PACKAGECONFIG:remove:pn-qemu-system-native = "gtk+ sdl"
+    EXTRA_IMAGE_FEATURES:append = " debug-tweaks"
+    PACKAGECONFIG:append:pn-perf = " coresight"
     INHERIT += "rm_work"
-    PACKAGECONFIG_append_pn-perf = " coresight"
-    ERROR_QA = "${WARN_QA}"
-  noptest: |
-    DISTRO_FEATURES_remove = "ptest"
-
+    DISTRO_FEATURES:remove = "ptest"
+  kvm: |
+    QEMU_USE_KVM = ""
+  perf: |
+    CORE_IMAGE_EXTRA_INSTALL += "perf"
+  sshkeys: |
+    CORE_IMAGE_EXTRA_INSTALL += "ssh-pregen-hostkeys"
 machine: unset
 
 target:
   - core-image-base
-  - perf

ci/bootstrap.yml

@@ -1,9 +0,0 @@
-header:
-  version: 9
-
-target:
-  - binutils-cross-aarch64
-  - gcc-cross-aarch64
-  - python3-native
-  - opkg-native
-  - rpm-native

ci/check-machine-coverage

@@ -2,6 +2,7 @@
 
 from pathlib import Path
 import sys
+from listmachines import list_machines
 
 metaarm = Path.cwd()
 
@@ -9,9 +10,10 @@ if metaarm.name != "meta-arm":
     print("Not running inside meta-arm")
     sys.exit(1)
 
+# Find all layers
+layers = (p.name for p in metaarm.glob("meta-*") if p.is_dir())
 # All machine configurations
-machines = metaarm.glob("meta-*/conf/machine/*.conf")
-machines = set(p.stem for p in machines)
+machines = list_machines(layers)
 
 # All kas files
 kas = metaarm.glob("ci/*.yml")

ci/check-warnings

@@ -7,7 +7,8 @@ set -e -u
 
 LOGFILE=$1
 
-if test -s $LOGFILE; then
+LINES=$(grep --invert-match "attempting MIRRORS if available" $LOGFILE | wc -l)
+if test "$LINES" -ne 0; then
     echo ==============================
     echo The build had warnings/errors:
     echo ==============================

ci/clang.yml

@@ -1,5 +1,5 @@
 header:
-  version: 9
+  version: 11
 
 repos:
   meta-clang:

ci/corstone1000-common.yml

@@ -0,0 +1,13 @@
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+    - ci/meta-openembedded.yml
+local_conf_header:
+    perf: |
+
+distro: poky-tiny
+
+target:
+  - perf
+  - corstone1000-image

ci/corstone1000-fvp.yml

@@ -0,0 +1,12 @@
+header:
+  version: 11
+  includes:
+    - ci/corstone1000-common.yml
+
+local_conf_header:
+    fvp-config: |
+        # Remove Dropbear SSH as it will not fit into the corstone1000 image.
+        IMAGE_FEATURES:remove = " ssh-server-dropbear"
+        INHERIT += "fvpboot"
+
+machine: corstone1000-fvp

ci/corstone1000-mps3.yml

@@ -0,0 +1,6 @@
+header:
+  version: 11
+  includes:
+    - ci/corstone1000-common.yml
+
+machine: corstone1000-mps3

ci/corstone500.yml

@@ -1,6 +1,18 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
+
+local_conf_header:
+  testimagefvp: |
+    INHERIT += "fvpboot"
+    IMAGE_FEATURES:remove = " ssh-server-dropbear"
+  perf: |
 
 machine: corstone500
+
+distro: poky-tiny
+
+target:
+  - core-image-minimal
+  - perf

ci/corstone700-fvp.yml

@@ -1,10 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: corstone700-fvp
-
-local_conf_header:
-  image: |
-    CORE_IMAGE_EXTRA_INSTALL = "corstone700-test-app"

ci/corstone700-mps3.yml

@@ -1,6 +0,0 @@
-header:
-  version: 9
-  includes:
-    - corstone700-fvp.yml
-
-machine: corstone700-mps3

ci/edk2.yml

@@ -0,0 +1,9 @@
+header:
+  version: 11
+
+local_conf_header:
+  bootfirmware: |
+    PREFERRED_PROVIDER_virtual/bootloader = "edk2-firmware"
+    MACHINE_FEATURES += "efi"
+    TFA_UBOOT = "0"
+    TFA_UEFI = "1"

ci/external-gcc-arm32.yml

@@ -1,8 +0,0 @@
-header:
-  version: 9
-
-local_conf_header:
-  cc: |
-    PNBLACKLIST[gcc-cross-arm] = "Using external toolchain"
-    TCMODE = "external-arm"
-    EXTERNAL_TOOLCHAIN = "/usr/local/gcc-arm-10.2-2020.11-aarch64-arm-none-linux-gnueabihf"

ci/external-gccarm.yml

@@ -0,0 +1,8 @@
+header:
+  version: 11
+
+local_conf_header:
+  cc: |
+    SKIP_RECIPE[gcc-cross-arm] = "Using external toolchain"
+    TCMODE = "external-arm"
+    EXTERNAL_TOOLCHAIN = "${TOPDIR}/toolchains/${TARGET_ARCH}"

ci/fvp-base-arm32.yml

@@ -1,6 +1,16 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: fvp-base-arm32
+
+local_conf_header:
+  testimagefvp: |
+    INHERIT = "fvpboot"
+    # This fails but we can't add to the ignorelist from meta-arm yet
+    # https://bugzilla.yoctoproject.org/show_bug.cgi?id=14604
+    TEST_SUITES:remove = "parselogs"
+    # Tell testimage to connect to localhost:8122, and forward that to SSH in the FVP.
+    TEST_TARGET_IP = "127.0.0.1:8122"
+    FVP_CONFIG[bp.virtio_net.hostbridge.userNetPorts] = "8122=22"

ci/fvp-base.yml

@@ -1,7 +1,16 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: fvp-base
 
+local_conf_header:
+  testimagefvp: |
+    INHERIT += "fvpboot"
+    # This fails but we can't add to the ignorelist from meta-arm yet
+    # https://bugzilla.yoctoproject.org/show_bug.cgi?id=14604
+    TEST_SUITES:remove = "parselogs"
+    # Tell testimage to connect to localhost:8022, and forward that to SSH in the FVP.
+    TEST_TARGET_IP = "localhost:8022"
+    FVP_CONFIG[bp.virtio_net.hostbridge.userNetPorts] ?= "8022=22"

ci/fvp-baser-aemv8r64.yml

@@ -1,7 +1,7 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: fvp-baser-aemv8r64
 

ci/fvps.yml

@@ -0,0 +1,20 @@
+# Simple target to build the FVPs that are publically available
+
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+
+machine: qemuarm64
+
+local_conf_header:
+  sdk: |
+    SDKMACHINE = "x86_64"
+
+target:
+  - nativesdk-fvp-base-a-aem
+  - nativesdk-fvp-n1-edge
+  - nativesdk-fvp-sgi575
+  - nativesdk-fvp-corstone500
+  - nativesdk-fvp-corstone1000
+  - nativesdk-fvp-tc0

ci/gem5-arm64-xen.yml

@@ -1,28 +0,0 @@
-
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-python.yml
-
-repos:
-  meta-arm:
-    layers:
-      meta-gem5:
-  meta-openembedded:
-    url: https://git.openembedded.org/meta-openembedded
-    layers:
-      meta-oe:
-      meta-filesystems:
-      meta-networking:
-  meta-virtualization:
-    url: git://git.yoctoproject.org/meta-virtualization
-
-machine: gem5-arm64
-
-local_conf_header:
-  meta-virt:
-    DISTRO_FEATURES_append = " virtualization xen"
-
-target:
-  - xen-image-minimal

ci/gem5-arm64.yml

@@ -1,21 +1,16 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
+    - ci/meta-openembedded.yml
 
 repos:
   meta-arm:
     layers:
       meta-gem5:
 
-  meta-openembedded:
-    url: https://git.openembedded.org/meta-openembedded
-    layers:
-      meta-oe:
-
 machine: gem5-arm64
 
 target:
   - core-image-minimal
-  - perf
   - gem5-aarch64-native

ci/gem5-atp-arm64.yml

@@ -1,7 +1,7 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - gem5-arm64.yml
+    - ci/gem5-arm64.yml
 
 repos:
   meta-arm:

ci/generic-arm64.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: generic-arm64

ci/get-binary-toolchains

@@ -0,0 +1,50 @@
+#!/bin/bash
+set -u -e
+
+BASENAME=gcc-arm
+VER=${VER:-10.3-2021.07}
+HOST_ARCH=${HOST_ARCH:-$(uname -m)}
+
+DOWNLOAD_DIR=$1
+TOOLCHAIN_DIR=$2
+TOOLCHAIN_LINK_DIR=$3
+
+# These should be already created by .gitlab-ci.yml, but do here if run outside of that env
+mkdir -p $DOWNLOAD_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+
+download() {
+	TRIPLE=$1
+	URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/$BASENAME-$VER-$HOST_ARCH-$TRIPLE.tar.xz
+	wget -P $DOWNLOAD_DIR -nc $URL
+}
+
+if [ $HOST_ARCH = "aarch64" ]; then
+	# AArch64 Linux hosted cross compilers
+
+	# AArch32 target with hard float
+	download arm-none-linux-gnueabihf
+elif [ $HOST_ARCH = "x86_64" ]; then
+	# x86_64 Linux hosted cross compilers
+
+	# AArch32 target with hard float
+	download arm-none-linux-gnueabihf
+
+	# AArch64 GNU/Linux target
+	download aarch64-none-linux-gnu
+else
+	echo "ERROR - Unknown build arch of $HOST_ARCH"
+	exit 1
+fi
+
+for i in arm aarch64; do
+	if [ ! -d $TOOLCHAIN_DIR/$BASENAME-$VER-$HOST_ARCH-$i-none-linux-gnu*/ ]; then
+		if [ ! -f $DOWNLOAD_DIR/$BASENAME-$VER-$HOST_ARCH-$i-none-linux-gnu*.tar.xz ]; then
+			continue
+		fi
+
+		tar -C $TOOLCHAIN_DIR -axvf $DOWNLOAD_DIR/$BASENAME-$VER-$HOST_ARCH-$i-none-linux-gnu*.tar.xz
+	fi
+
+	# Setup a link for the toolchain to use local to the building machine (e.g., not in a shared location)
+	ln -s $TOOLCHAIN_DIR/$BASENAME-$VER-$HOST_ARCH-$i-none-linux-gnu* $TOOLCHAIN_LINK_DIR/$i
+done

ci/jobs-to-kas

@@ -1,19 +1,27 @@
 #! /bin/bash
 
-# Read a GitLab CI job name on $1 and transform it to a
-# list of Kas yaml files
+# This script is expecting an input of machine name, optionally followed by a
+# colon and a list of one or more parameters separated by commas between
+# brackets.  For example, the following are acceptable:
+# corstone500
+# fvp-base: [testimage]
+# qemuarm64-secureboot: [clang, glibc, testimage]
+#
+# Turn this list into a series of yml files separated by colons to pass to kas
 
 set -e -u
 
-# Read Job namne from $1 and split on /
-IFS=/ read -r -a PARTS<<<$1
+FILES="ci/$(echo $1 | cut -d ':' -f 1).yml"
 
-# Prefix each part with ci/
-PARTS=("${PARTS[@]/#/ci/}")
+for i in $(echo $1 | cut -s -d ':' -f 2 | sed 's/[][,]//g'); do
+	# Given that there are no yml files for gcc or glibc, as those are the
+	# defaults, we can simply ignore those parameters.  They are necessary
+	# to pass in so that matrix can correctly setup all of the permutations
+	# of each individual run.
+	if [[ $i == 'none' || $i == 'gcc' || $i == 'glibc' ]]; then
+		continue
+	fi
+	FILES+=":ci/$i.yml"
+done
 
-# Suffix each part with .yml
-PARTS=("${PARTS[@]/%/.yml}")
-
-# Print colon-separated
-IFS=":"
-echo "${PARTS[*]}"
+echo $FILES

ci/juno.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: juno

ci/listmachines.py

@@ -0,0 +1,29 @@
+#! /usr/bin/env python3
+
+import pathlib
+import typing
+import sys
+
+"""
+List all of the machines available under the listed sub-layers of meta-arm.
+"""
+def list_machines(layers: typing.Sequence[str]) -> typing.Set[str]:
+    machines = set()
+
+    # We know we're in meta-arm/scripts, so find the top-level directory
+    metaarm = pathlib.Path(__file__).resolve().parent.parent
+    if metaarm.name != "meta-arm":
+        raise Exception("Not running inside meta-arm")
+    
+    for layer in layers:
+        machines |= set(p.stem for p in (metaarm / layer / "conf" / "machine").glob("*.conf"))
+    return machines
+
+if __name__ == "__main__":
+    if len(sys.argv) > 1:
+        machines = list_machines(sys.argv[1:])
+        print(" ".join(sorted(machines)))
+        sys.exit(0)
+    else:
+        print("Usage:\n$ %s [layer name ...] " % sys.argv[0])
+        sys.exit(1)

ci/meta-openembedded.yml

@@ -1,9 +1,11 @@
 header:
-  version: 9
+  version: 11
 
 repos:
   meta-openembedded:
     url: https://git.openembedded.org/meta-openembedded
     layers:
+      meta-filesystems:
+      meta-networking:
       meta-oe:
       meta-python:

ci/meta-virtualization.yml

@@ -0,0 +1,8 @@
+header:
+  version: 11
+  includes:
+    - ci/meta-openembedded.yml
+
+repos:
+  meta-virtualization:
+    url: git://git.yoctoproject.org/meta-virtualization

ci/meta-zephyr.yml

@@ -1,8 +1,13 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - meta-python.yml
+    - ci/meta-openembedded.yml
 
 repos:
   meta-zephyr:
     url: https://git.yoctoproject.org/git/meta-zephyr
+    layers:
+      meta-zephyr-core:
+
+target:
+  - zephyr-kernel-test-all

ci/microbit-v1.yml

@@ -1,10 +1,7 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
-    - meta-zephyr.yml
+    - ci/base.yml
+    - ci/meta-zephyr.yml
 
 machine: microbit-v1
-
-target:
-  - zephyr-philosophers

ci/musca-b1.yml

@@ -1,11 +1,15 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
-    - meta-zephyr.yml
+    - ci/base.yml
+    - ci/meta-zephyr.yml
+
+local_conf_header:
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove = "common sleep poll device queue"
 
 machine: musca-b1
 
 target:
   - trusted-firmware-m
-  - zephyr-philosophers
+  - zephyr-kernel-test-all

ci/musca-s1.yml

@@ -1,10 +1,15 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
-    - meta-python.yml
+    - ci/base.yml
+    - ci/meta-zephyr.yml
+
+local_conf_header:
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove = "common sleep poll device queue"
 
 machine: musca-s1
 
 target:
   - trusted-firmware-m
+  - zephyr-kernel-test-all

ci/musl.yml

@@ -1,5 +1,5 @@
 header:
-  version: 9
+  version: 11
 
 local_conf_header:
   libc: |

ci/n1sdp.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: n1sdp

ci/patchreview

@@ -0,0 +1,286 @@
+#! /usr/bin/env python3
+#
+# SPDX-License-Identifier: GPL-2.0-only
+#
+
+# TODO
+# - option to just list all broken files
+# - test suite
+# - validate signed-off-by
+
+import argparse
+import collections
+import json
+import os
+import re
+import subprocess
+
+status_values = (
+    "accepted",
+    "pending",
+    "inappropriate",
+    "backport",
+    "submitted",
+    "denied",
+)
+
+
+class PatchResult:
+    # Whether the patch has an Upstream-Status or not
+    missing_upstream_status = False
+    # If the Upstream-Status tag is malformed in some way (string for bad bit)
+    malformed_upstream_status = None
+    # If the Upstream-Status value is unknown (boolean)
+    unknown_upstream_status = False
+    # The upstream status value (Pending, etc)
+    upstream_status = None
+    # Whether the patch has a Signed-off-by or not
+    missing_sob = False
+    # Whether the Signed-off-by tag is malformed in some way
+    malformed_sob = False
+    # The Signed-off-by tag value
+    sob = None
+    # Whether a patch looks like a CVE but doesn't have a CVE tag
+    missing_cve = False
+
+
+class Summary:
+    total = 0
+    cve_missing = 0
+    sob_missing = 0
+    sob_malformed = 0
+    status_missing = 0
+    status_malformed = 0
+    status_pending = 0
+
+def blame_patch(patch):
+    """
+    From a patch filename, return a list of "commit summary (author name <author
+    email>)" strings representing the history.
+    """
+    return subprocess.check_output(("git", "log",
+                                    "--follow", "--find-renames", "--diff-filter=A",
+                                    "--format=%s (%aN <%aE>)",
+                                    "--", patch)).decode("utf-8").splitlines()
+
+def patchreview(patches):
+    # General pattern: start of line, optional whitespace, tag with optional
+    # hyphen or spaces, maybe a colon, some whitespace, then the value, all case
+    # insensitive.
+    sob_re = re.compile(r"^[\t ]*(Signed[-_ ]off[-_ ]by:?)[\t ]*(.+)", re.IGNORECASE | re.MULTILINE)
+    status_re = re.compile(r"^[\t ]*(Upstream[-_ ]Status:?)[\t ]*(\w*)", re.IGNORECASE | re.MULTILINE)
+    cve_tag_re = re.compile(r"^[\t ]*(CVE:)[\t ]*(.*)", re.IGNORECASE | re.MULTILINE)
+    cve_re = re.compile(r"cve-[0-9]{4}-[0-9]{4,6}", re.IGNORECASE)
+
+    results = {}
+
+    for patch in patches:
+
+        result = PatchResult()
+        results[patch] = result
+
+        content = open(patch, encoding="ascii", errors="ignore").read()
+
+        # Find the Signed-off-by tag
+        match = sob_re.search(content)
+        if match:
+            value = match.group(1)
+            if value != "Signed-off-by:":
+                result.malformed_sob = value
+            result.sob = match.group(2)
+        else:
+            result.missing_sob = True
+
+        # Find the Upstream-Status tag
+        match = status_re.search(content)
+        if match:
+            value = match.group(1)
+            if value != "Upstream-Status:":
+                result.malformed_upstream_status = value
+
+            value = match.group(2).lower()
+            # TODO: check case
+            if value not in status_values:
+                result.unknown_upstream_status = True
+            result.upstream_status = value
+        else:
+            result.missing_upstream_status = True
+
+        # Check that patches which looks like CVEs have CVE tags
+        if cve_re.search(patch) or cve_re.search(content):
+            if not cve_tag_re.search(content):
+                result.missing_cve = True
+        # TODO: extract CVE list
+
+    return results
+
+
+def analyse(results, want_blame=False, verbose=True):
+    """
+    want_blame: display blame data for each malformed patch
+    verbose: display per-file results instead of just summary
+    """
+
+    # want_blame requires verbose, so disable blame if we're not verbose
+    if want_blame and not verbose:
+        want_blame = False
+
+    summary = Summary()
+
+    for patch in sorted(results):
+        r = results[patch]
+        summary.total += 1
+        need_blame = False
+
+        # Build statistics
+        if r.missing_sob:
+            summary.sob_missing += 1
+        if r.malformed_sob:
+            summary.sob_malformed += 1
+        if r.missing_upstream_status:
+            summary.status_missing += 1
+        if r.malformed_upstream_status or r.unknown_upstream_status:
+            summary.status_malformed += 1
+            # Count patches with no status as pending
+            summary.status_pending += 1
+        if r.missing_cve:
+            summary.cve_missing += 1
+        if r.upstream_status == "pending":
+            summary.status_pending += 1
+
+        # Output warnings
+        if r.missing_sob:
+            need_blame = True
+            if verbose:
+                print("Missing Signed-off-by tag (%s)" % patch)
+        if r.malformed_sob:
+            need_blame = True
+            if verbose:
+                print("Malformed Signed-off-by '%s' (%s)" % (r.malformed_sob, patch))
+        if r.missing_cve:
+            need_blame = True
+            if verbose:
+                print("Missing CVE tag (%s)" % patch)
+        if r.missing_upstream_status:
+            need_blame = True
+            if verbose:
+                print("Missing Upstream-Status tag (%s)" % patch)
+        if r.malformed_upstream_status:
+            need_blame = True
+            if verbose:
+                print("Malformed Upstream-Status '%s' (%s)" % (r.malformed_upstream_status, patch))
+        if r.unknown_upstream_status:
+            need_blame = True
+            if verbose:
+                print("Unknown Upstream-Status value '%s' (%s)" % (r.upstream_status, patch))
+
+        if want_blame and need_blame:
+            print("\n".join(blame_patch(patch)) + "\n")
+
+    return summary
+
+
+def display_summary(summary, verbose):
+    def percent(num):
+        try:
+            return "%d (%d%%)" % (num, round(num * 100.0 / summary.total))
+        except ZeroDivisionError:
+            return "N/A"
+
+    if verbose:
+        print()
+
+    print("""Total patches found: %d
+Patches missing Signed-off-by: %s
+Patches with malformed Signed-off-by: %s
+Patches missing CVE: %s
+Patches missing Upstream-Status: %s
+Patches with malformed Upstream-Status: %s
+Patches in Pending state: %s""" % (summary.total,
+                                   percent(summary.sob_missing),
+                                   percent(summary.sob_malformed),
+                                   percent(summary.cve_missing),
+                                   percent(summary.status_missing),
+                                   percent(summary.status_malformed),
+                                   percent(summary.status_pending)))
+
+
+def generate_metrics(summary, output):
+    # https://github.com/OpenObservability/OpenMetrics/blob/main/specification/OpenMetrics.md
+    # Summary attribute name, MetricPoint help
+    mapping = (
+        ("total", "Total patches"),
+        ("cve_missing", "Patches missing CVE tag"),
+        ("sob_malformed", "Patches with malformed Signed-off-by"),
+        ("sob_missing", "Patches with missing Signed-off-by"),
+        ("status_malformed", "Patches with malformed Upstream-Status"),
+        ("status_missing", "Patches with missing Upstream-Status"),
+        ("status_pending", "Patches with Pending Upstream-Status")
+    )
+    for attr, help in mapping:
+        metric = f"patch_check_{attr}"
+        value = getattr(summary, attr)
+        output.write(f"""
+# TYPE {metric} gauge
+# HELP {help}
+{metric} {value}
+""")
+    output.write("\n# EOF\n")
+
+def histogram(results):
+    import math
+
+    from toolz import dicttoolz, recipes
+    counts = recipes.countby(lambda r: r.upstream_status, results.values())
+    bars = dicttoolz.valmap(lambda v: "#" * int(math.ceil(float(v) / len(results) * 100)), counts)
+    for k in bars:
+        print("%-20s %s (%d)" % (k.capitalize() if k else "No status", bars[k], counts[k]))
+
+def gather_patches(directories):
+    patches = []
+    for directory in directories:
+        filenames = subprocess.check_output(("git", "-C", directory, "ls-files", "recipes-*/**/*.patch", "recipes-*/**/*.diff")).decode("utf-8").split()
+        patches += [os.path.join(directory, f) for f in filenames]
+    return patches
+
+if __name__ == "__main__":
+    args = argparse.ArgumentParser(description="Patch Review Tool")
+    args.add_argument("-b", "--blame", action="store_true", help="show blame for malformed patches")
+    args.add_argument("-v", "--verbose", action="store_true", help="show per-patch results")
+    args.add_argument("-g", "--histogram", action="store_true", help="show patch histogram")
+    args.add_argument("-j", "--json", help="update JSON")
+    args.add_argument("-m", "--metrics", type=argparse.FileType('w'), help="write OpenMetrics")
+    args.add_argument("dirs", metavar="DIRECTORY", nargs="+", help="directory to scan")
+    args = args.parse_args()
+
+    patches = gather_patches(args.dirs)
+    results = patchreview(patches)
+    summary = analyse(results, want_blame=args.blame, verbose=args.verbose)
+    display_summary(summary, verbose=args.verbose)
+
+    if args.json:
+        if os.path.isfile(args.json):
+            data = json.load(open(args.json))
+        else:
+            data = []
+
+        row = collections.Counter()
+        row["total"] = len(results)
+        row["date"] = subprocess.check_output(["git", "-C", args.dirs[0], "show", "-s", "--pretty=format:%cd", "--date=format:%s"]).decode("utf-8").strip()
+        for r in results.values():
+            if r.upstream_status in status_values:
+                row[r.upstream_status] += 1
+            if r.malformed_upstream_status or r.missing_upstream_status:
+                row["malformed-upstream-status"] += 1
+            if r.malformed_sob or r.missing_sob:
+                row["malformed-sob"] += 1
+
+        data.append(row)
+        json.dump(data, open(args.json, "w"))
+
+    if args.metrics:
+        generate_metrics(summary, args.metrics)
+
+    if args.histogram:
+        print()
+        histogram(results)

ci/qemu-cortex-a53.yml

@@ -1,10 +1,9 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
-    - meta-zephyr.yml
+    - ci/base.yml
+    - ci/meta-zephyr.yml
+
+# FIXME - testimage fails all tests currently, but all the tests build
 
 machine: qemu-cortex-a53
-
-target:
-  - zephyr-philosophers

ci/qemu-cortex-m3.yml

@@ -0,0 +1,20 @@
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+    - ci/meta-zephyr.yml
+
+repos:
+  meta-zephyr:
+    layers:
+      meta-zephyr-bsp:
+
+local_conf_header:
+  tclibc: |
+    TCLIBC = "newlib"
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove = "context pending poll sleep"
+  qemu_opts: |
+    QB_OPT_APPEND = "-icount shift=3,align=off,sleep=on -rtc clock=vm"
+
+machine: qemu-cortex-m3

ci/qemu-cortex-r5.yml

@@ -0,0 +1,11 @@
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+    - ci/meta-zephyr.yml
+
+local_conf_header:
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove = "common poll sleep queue device"
+
+machine: qemu-cortex-r5

ci/qemu-generic-arm64.yml

@@ -0,0 +1,14 @@
+header:
+  version: 11
+  includes:
+    - ci/generic-arm64.yml
+
+local_conf_header:
+  failing_tests: |
+    DEFAULT_TEST_SUITES:remove = "parselogs"
+
+machine: qemu-generic-arm64
+
+target:
+  - core-image-base
+  - sbsa-acs

ci/qemuarm.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: qemuarm

ci/qemuarm64-sbsa.yml

@@ -1,11 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: qemuarm64-sbsa
-
-target:
-  - core-image-base
-  - perf
-  - sbsa-acs

ci/qemuarm64-secureboot.yml

@@ -1,11 +1,18 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: qemuarm64-secureboot
 
+local_conf_header:
+  failing_tests: |
+    # software IO TLB: Cannot allocate buffer
+    DEFAULT_TEST_SUITES:remove = "parselogs"
+
 target:
   - core-image-base
-  - perf
   - optee-examples
+  - optee-test
+  - optee-spdevkit
+  - optee-os-tadevkit

ci/qemuarm64.yml

@@ -0,0 +1,6 @@
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+
+machine: qemuarm64

ci/qemuarmv5.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: qemuarmv5

ci/selftest.yml

@@ -0,0 +1,7 @@
+header:
+  version: 11
+
+local_conf_header:
+  setup: |
+    BB_LOGCONFIG = ""
+    SANITY_TESTED_DISTROS = ""

ci/sgi575.yml

@@ -1,6 +1,6 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: sgi575

ci/tc0.yml

@@ -1,6 +1,9 @@
 header:
-  version: 9
+  version: 11
   includes:
-    - base.yml
+    - ci/base.yml
 
 machine: tc0
+
+target:
+  - tc-artifacts-image

ci/tc1.yml

@@ -0,0 +1,9 @@
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+
+machine: tc1
+
+target:
+  - tc-artifacts-image

ci/testimage-zephyr.yml

@@ -0,0 +1,8 @@
+header:
+  version: 11
+
+local_conf_header:
+  testimage: |
+    IMAGE_CLASSES += "testimage"
+    TEST_TARGET = "QemuTargetZephyr"
+    TEST_SUITES = "zephyr"

ci/testimage.yml

@@ -0,0 +1,13 @@
+header:
+  version: 11
+
+local_conf_header:
+  testimage: |
+    IMAGE_CLASSES += "testimage"
+    TESTIMAGE_AUTO = "1"
+  slirp: |
+    TEST_RUNQEMUPARAMS = "slirp"
+    TEST_SERVER_IP = "127.0.0.1"
+    QEMU_USE_SLIRP = "1"
+  sshd: |
+    IMAGE_FEATURES:append = " ssh-server-dropbear"

ci/tftf.yml

@@ -0,0 +1,7 @@
+header:
+  version: 9
+
+local_conf_header:
+  tftf: |
+    TFA_UBOOT = "0"
+    TFTF_TESTS = "1"

ci/toolchains.yml

@@ -0,0 +1,19 @@
+header:
+  version: 11
+  includes:
+    - ci/base.yml
+
+# Target is arm64 and SDK is x86-64 to ensure that we exercise both
+# architectures
+
+machine: qemuarm64
+local_conf_header:
+  toolchains: |
+    SDKMACHINE = "x86_64"
+
+target:
+  - gcc-aarch64-none-elf
+  - nativesdk-gcc-aarch64-none-elf
+  - gcc-arm-none-eabi
+  - nativesdk-gcc-arm-none-eabi
+  - nativesdk-androidclang

ci/xen.yml

@@ -0,0 +1,11 @@
+header:
+  version: 11
+  includes:
+    - ci/meta-virtualization.yml
+
+local_conf_header:
+  meta-virt: |
+    DISTRO_FEATURES:append = " virtualization xen"
+
+target:
+  - xen-image-minimal

documentation/oeqa-fvp.md

@@ -0,0 +1,55 @@
+# OEQA on Arm FVPs
+
+OE-Core's [oeqa][OEQA] framework provides a method of performing runtime tests on machines using the `testimage` Yocto task. meta-arm has good support for writing test cases against [Arm FVPs][FVP], meaning the [runfvp][RUNFVP] boot configuration can be re-used.
+
+Tests can be configured to run automatically post-build by setting the variable `TESTIMAGE_AUTO="1"`, e.g. in your Kas file or local.conf.
+
+There are two main methods of testing, using different test "targets".
+
+## OEFVPTarget
+
+This runs test cases on a machine using SSH. It therefore requires that an SSH server is installed in the image.
+
+In test cases, the primary interface with the target is, e.g:
+```
+(status, output) = self.target.run('uname -a')
+```
+which runs a single command on the target (using `ssh -c`) and returns the status code and the output. It is therefore useful for running tests in a Linux environment.
+
+For examples of test cases, see meta/lib/oeqa/runtime/cases in OE-Core. The majority of test cases depend on `ssh.SSHTest.test_ssh`, which first validates that the SSH connection is functioning.
+
+Example machine configuration:
+```
+TEST_TARGET = "OEFVPTarget"
+TEST_SERVER_IP = "127.0.0.1"
+TEST_TARGET_IP = "127.0.0.1:8022"
+IMAGE_FEATURES:append = " ssh-server-dropbear"
+FVP_CONFIG[bp.virtio_net.hostbridge.userNetPorts] ?= "8022=22"
+```
+
+## OEFVPSerialTarget
+
+This runs tests against one or more serial consoles on the FVP. It is more flexible than OEFVPTarget, but test cases written for this test target do not support the test cases in OE-core. As it does not require an SSH server, it is suitable for machines with performance or memory limitations.
+
+Internally, this test target launches a [Pexpect][PEXPECT] instance for each entry in FVP_CONSOLES which can be used with the provided alias. The whole Pexpect API is exposed on the target, where the alias is always passed as the first argument, e.g.:
+```
+self.target.expect('default', r'root@.*\:~#', timeout=30)
+self.assertNotIn(b'ERROR:', self.target.before('tf-a'))
+```
+
+For an example of a full test case, see meta-arm/lib/oeqa/runtime/cases/linuxboot.py This test case can be used to minimally verify that a machine boots to a Linux shell. The default timeout is 10 minutes, but this can be configured with the variable TEST_FVP_LINUX_BOOT_TIMEOUT, which expects a value in seconds.
+
+The SSH interface described above is also available on OEFVPSerialTarget to support writing a set of hybrid test suites that use a combination of serial and SSH access. Note however that this test target does not guarantee that Linux has booted to shell prior to running any tests, so the test cases in OE-core are not supported.
+
+Example machine configuration:
+```
+TEST_TARGET="OEFVPSerialTarget"
+TEST_SUITES="linuxboot"
+FVP_CONSOLES[default] = "terminal_0"
+FVP_CONSOLES[tf-a] = "s_terminal_0"
+```
+
+[OEQA]: https://docs.yoctoproject.org/test-manual/intro.html
+[FVP]: https://developer.arm.com/tools-and-software/simulation-models/fixed-virtual-platforms
+[RUNFVP]: runfvp.md
+[PEXPECT]: https://pexpect.readthedocs.io/en/stable/overview.html

documentation/runfvp.md

@@ -0,0 +1,131 @@
+# Running Images with a FVP
+
+The `runfvp` tool in meta-arm makes it easy to run Yocto Project disk images inside a [Fixed Virtual Platform (FVP)][FVP].  Some FVPs, such as the [Arm Architecture Models][AEM], are available free to download, but others need registration or are only available commercially.  The `fvp-base` machine in meta-arm-bsp uses one of these AEM models.
+
+## Running images with `runfvp`
+
+To build images with the FVP integration, the `fvpboot` class needs to be inherited.  If the machine does not do this explicitly it can be done in `local.conf`:
+
+```
+INHERIT += "fvpboot"
+```
+
+The class will download the correct FVP and write a `.fvpconf` configuration file when an image is built.
+
+To run an image in a FVP, pass either a machine name or a `.fvpconf` path to `runfvp`.
+
+```
+$ ./meta-arm/scripts/runfvp tmp/deploy/images/fvp-base/core-image-minimal-fvp-base.fvpconf
+```
+
+When a machine name is passed, `runfvp` will start the latest image that has been built for that machine. This requires that the BitBake environment has been initialized (using `oe-init-build-env` or similar) as it will start BitBake to determine where the images are.
+
+```
+$ ./meta-arm/scripts/runfvp fvp-base
+```
+
+Note that currently meta-arm's `scripts` directory isn't in `PATH`, so a full path needs to be used.
+
+`runfvp` will automatically start terminals connected to each of the serial ports that the machine specifies.  This can be controlled by using the `--terminals` option, for example `--terminals=none` will mean no terminals are started, and `--terminals=tmux` will start the terminals in [`tmux`][tmux] sessions.  Alternatively, passing `--console` will connect the serial port directly to the current session, without needing to open further windows.
+
+The default terminal can also be configured by writing a [INI-style][INI] configuration file to `~/.config/runfvp.conf`:
+
+```
+[RunFVP]
+Terminal=tmux
+```
+
+Arbitrary options can be passed directly to the FVP by specifying them after a double dash, for example this will list all of the FVP parameters:
+
+```
+$ runfvp fvp-base -- --list-params
+```
+
+## Configuring machines with `fvpboot`
+
+To configure a machine so that it can be ran inside `runfvp`, a number of variables need to be set in the machine configuration file (such as `meta-arm-bsp/conf/machine/fvp-base.conf`).
+
+Note that at present these variables are not stable and their behaviour may be changed in the future.
+
+### `FVP_EXE`
+
+The name of the FVP binary itself, for example `fvp-base` uses `FVP_Base_RevC-2xAEMvA`.
+
+### `FVP_PROVIDER`
+
+The name of the recipe that provides the FVP executable set in `FVP_EXE`, for example `fvp-base` uses `fvp-base-a-aem-native`.  This *must* be a `-native` recipe as the binary will be executed on the build host.
+
+There are recipes for common FVPs in meta-arm already, and writing new recipes is trivial.  For FVPs which are free to download `fvp-base-a-aem.bb` is a good example. Some FVPs must be downloaded separately as they need an account on Arm's website, `fvp-base-r-aem.bb` is a good example of those.
+
+If `FVP_PROVIDER` is not set then it is assumed that `FVP_EXE` is installed on the host already.
+
+### `FVP_CONFIG`
+
+Parameters passed to the FVP with the `--parameter`/`-C` option.  These are expressed as variable flags so individual parameters can be altered easily. For example:
+
+```
+FVP_CONFIG[bp.flashloader0.fname] = "${DEPLOY_DIR_IMAGE}/fip-fvp.bin"
+```
+
+### `FVP_DATA`
+
+Specify raw data to load at the specified address, passed to the FVP with the `--data` option.  This is a space-separated list of parameters in the format `[INST=]FILE@[MEMSPACE:]ADDRESS`. For example:
+
+```
+FVP_DATA = "cluster0.cpu0=${DEPLOY_DIR_IMAGE}/Image@0x80080000 \
+            cluster0.cpu0=${DEPLOY_DIR_IMAGE}/fvp-base-revc.dtb@0x83000000"
+```
+
+### `FVP_APPLICATIONS`
+
+Applications to load on the cores, passed to the FVP with the `--application` option.  These are expressed as variable flags with the flag name being the instance and flag value the filename, for example:
+
+```
+FVP_APPLICATIONS[cluster0] = "${DEPLOY_DIR_IMAGE}/linux-system.axf"
+```
+
+Note that symbols are not allowed in flag names, so if you need to use a wildcard in the instance then you'll need to use `FVP_EXTRA_ARGS` and `--application` directly.
+
+### `FVP_TERMINALS`
+
+Map hardware serial ports to abstract names. For example the `FVP_Base_RevC-2xAEMvA` FVP exposes four serial ports, `terminal_0` to `terminal_3`.  Typically only `terminal_0` is used in the `fvp-base` machine so this can be named `"Console"` and the others `""`.  When runfvp starts terminals it will only start named serial ports, so instead of opening four windows where only one is useful, it will only open one.
+
+For example:
+```
+FVP_TERMINALS[bp.terminal_0] = "Console"
+FVP_TERMINALS[bp.terminal_1] = ""
+FVP_TERMINALS[bp.terminal_2] = ""
+FVP_TERMINALS[bp.terminal_3] = ""
+```
+
+### `FVP_CONSOLES`
+
+This specifies what serial ports can be used in oeqa tests, along with an alias to be used in the test cases. Note that the values have to be the FVP identifier but without the board prefix, for example:
+```
+FVP_CONSOLES[default] = "terminal_0"
+FVP_CONSOLES[tf-a] = "s_terminal_0"
+```
+
+The 'default' console is also used when `--console` is passed to runfvp.
+
+### `FVP_EXTRA_ARGS`
+
+Arbitrary extra arguments that are passed directly to the FVP.  For example:
+
+```
+FVP_EXTRA_ARGS = "--simlimit 60"
+```
+
+### `FVP_ENV_PASSTHROUGH`
+
+The FVP is launched with an isolated set of environment variables. Add the name of a Bitbake variable to this list to pass it through to the FVP environment. For example:
+
+```
+FVP_ENV_PASSTHROUGH = "ARMLMD_LICENSE_FILE FM_TRACE_PLUGINS"
+```
+
+
+[AEM]: https://developer.arm.com/tools-and-software/simulation-models/fixed-virtual-platforms/arm-ecosystem-models
+[FVP]: https://developer.arm.com/tools-and-software/simulation-models/fixed-virtual-platforms
+[tmux]: https://tmux.github.io/
+[INI]: https://docs.python.org/3/library/configparser.html

kas/corstone1000-base.yml

@@ -0,0 +1,42 @@
+header:
+  version: 11
+
+distro: poky-tiny
+
+defaults:
+  repos:
+    refspec: kirkstone
+
+repos:
+  meta-arm:
+    layers:
+      meta-arm:
+      meta-arm-bsp:
+      meta-arm-toolchain:
+
+  poky:
+    url: https://git.yoctoproject.org/git/poky
+    layers:
+      meta:
+      meta-poky:
+      meta-yocto-bsp:
+
+  meta-openembedded:
+    url: https://git.openembedded.org/meta-openembedded
+    layers:
+      meta-oe:
+      meta-python:
+
+local_conf_header:
+  base: |
+    CONF_VERSION = "2"
+    PACKAGE_CLASSES = "package_ipk"
+    LICENSE_FLAGS_ACCEPTED += "armcompiler"
+    BB_NUMBER_THREADS ?= "16"
+    PARALLEL_MAKE ?= "-j16"
+    PACKAGECONFIG:append:pn-perf = " coresight"
+
+machine: unset
+
+target:
+  - corstone1000-image

kas/corstone1000-fvp.yml

@@ -0,0 +1,16 @@
+header:
+  version: 11
+  includes:
+    - kas/corstone1000-base.yml
+
+machine: corstone1000-fvp
+
+local_conf_header:
+    fvp-config: |
+        # Remove Dropbear SSH as it will not fit into the corstone1000 image.
+        IMAGE_FEATURES:remove = " ssh-server-dropbear"
+        INHERIT = " ${@bb.utils.contains('BUILD_ARCH', 'x86_64', 'fvpboot', '', d)}"
+        LICENSE_FLAGS_ACCEPTED:append = " Arm-FVP-EULA"
+
+target:
+  - corstone1000-image

kas/corstone1000-mps3.yml

@@ -0,0 +1,6 @@
+header:
+  version: 11
+  includes:
+    - kas/corstone1000-base.yml
+
+machine: corstone1000-mps3

kas/corstone500.yml

@@ -0,0 +1,47 @@
+header:
+  version: 11
+
+distro: poky-tiny
+
+defaults:
+  repos:
+    refspec: master
+
+repos:
+  meta-arm:
+    layers:
+      meta-arm:
+      meta-arm-bsp:
+      meta-arm-toolchain:
+
+  poky:
+    url: https://git.yoctoproject.org/git/poky
+    refspec: master
+    layers:
+      meta:
+      meta-poky:
+      meta-yocto-bsp:
+
+  meta-openembedded:
+    url: https://git.openembedded.org/meta-openembedded
+    refspec: master
+    layers:
+      meta-oe:
+      meta-python:
+
+local_conf_header:
+  base: |
+    CONF_VERSION = "2"
+    PACKAGE_CLASSES = "package_ipk"
+    LICENSE_FLAGS_ACCEPTED += "armcompiler"
+    BB_NUMBER_THREADS ?= "16"
+    PARALLEL_MAKE ?= "-j16"
+    PACKAGECONFIG:append:pn-perf = " coresight"
+  fvp-config: |
+    IMAGE_CLASSES:append = " ${@bb.utils.contains('BUILD_ARCH', 'x86_64', 'fvpboot', '', d)}"
+    LICENSE_FLAGS_ACCEPTED:append = " Arm-FVP-EULA"
+
+machine: corstone500
+
+target:
+  - core-image-minimal

kas/fvp-baser-aemv8r64-bsp.yml

@@ -6,10 +6,12 @@ machine: fvp-baser-aemv8r64
 
 defaults:
   repos:
-    refspec: hardknott
+    refspec: master
 
 repos:
   meta-arm:
+    url: https://git.yoctoproject.org/git/meta-arm
+    path: layers/meta-arm
     layers:
       meta-arm:
       meta-arm-bsp:
@@ -17,16 +19,23 @@ repos:
 
   poky:
     url: https://git.yoctoproject.org/git/poky
+    path: layers/poky
     layers:
       meta:
       meta-poky:
 
+env:
+  FVP_BASE_R_ARM_EULA_ACCEPT: "False"
+
 local_conf_header:
   base: |
-    CONF_VERSION = "1"
+    CONF_VERSION = "2"
     PACKAGE_CLASSES = "package_ipk"
-    PACKAGECONFIG_remove_pn-qemu-system-native = "gtk+ sdl"
-    EXTRA_IMAGE_FEATURES_append = " debug-tweaks"
+    PACKAGECONFIG:remove:pn-qemu-system-native = "gtk+ sdl"
+    EXTRA_IMAGE_FEATURES:append = " debug-tweaks ssh-server-openssh"
+    CORE_IMAGE_EXTRA_INSTALL:append = " ssh-pregen-hostkeys"
+    LICENSE_FLAGS_ACCEPTED:append = " ${@oe.utils.vartrue('FVP_BASE_R_ARM_EULA_ACCEPT', 'Arm-FVP-EULA', '', d)}"
+    IMAGE_CLASSES:append = " testimage"
 
 target:
   - core-image-minimal

kas/fvp-baser-aemv8r64-rt-bsp.yml

@@ -0,0 +1,8 @@
+header:
+  version: 9
+  includes:
+    - kas/fvp-baser-aemv8r64-bsp.yml
+
+local_conf_header:
+  base-rt: |
+    PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-rt"

kas/tftf.yml

@@ -0,0 +1,7 @@
+header:
+  version: 9
+
+local_conf_header:
+  tftf: |
+    TFA_UBOOT = "0"
+    TFTF_TESTS = "1"

meta-arm-autonomy/README.md

@@ -1,85 +1,16 @@
 meta-arm-autonomy Yocto Layer
 =============================
 
-Introduction
-------------
-This layer provides an hypervisor based solution (currently based on Xen) for
-autonomous system. It contains recipes and classes to build host and guest
-images.
+The meta-arm-autonomy layer is being deprecated from master, with bug fixes
+only being applied to the following branches. Additionally, all support and
+maintenance of meta-arm-autonomy will stop as per the schedule below.
 
-To start using this layer, please check the
-[Quick Start Guide](documentation/arm-autonomy-quickstart.md).
+    honister: End-of-life scheduled to June 2022
+    hardknot: End-of-life scheduled to December 2021
+    gatesgarth: End-of-life scheduled to October 2021
+    dunfell: End-of-life scheduled to October 2021
+    master: End-of-life scheduled to October 2021 and code removed
 
-Dependencies
-------------
-This layer depends on several other Yocto layers:
-* meta-openembedded (https://git.openembedded.org/meta-openembedded)
-* poky (https://git.yoctoproject.org/poky)
-* meta-virtualization (https://git.yoctoproject.org/meta-virtualization)
-* meta-networking (git://git.openembedded.org/meta-openembedded)
-
-Distribution Features
----------------------
-This layer adds the following Yocto DISTRO_FEATURES:
-
-* arm-autonomy-host: this feature activates functionalities required to build
-  an autonomy host system. It has the following effects:
-  - add 'xen' and 'ipv4' to DISTRO_FEATURES.
-  - add xen backend drivers to linux kernel configuration.
-  - To reduce the root filesystem image size the kernel image is not installed.
-
-* arm-autonomy-guest: this feature activates functionalities to run as guest
-  of an autonomy system. It is doing the following:
-  - add 'ipv4' to DISTRO_FEATURES.
-  - add xen frontend drivers to linux kernel configuration.
-  - add console on hvc0 during init.
-
-Bitbake variables
------------------
-Some recipes and classes in this layer are introducing variables which can be
-modified by the user in local.conf.
-Each recipe introducing such variables has a chapter "Bitbake parameters" in
-its documentation.
-
-Those documentation files should be checked for variables:
-- [xen-devicetree](documentation/xen-devicetree.md)
-- [xenguest-manager](documentation/xenguest-manager.md)
-- [xenguest-network](documentation/xenguest-network.md)
-
-BSPs
-----
-This layer adds the following machine:
-
-* arm64-autonomy-guest: This machine creates a minimal BSP suitable to be used
-  as an autonomy guest. It is in fact only activating ARM64 architecture and
-  SMP in the linux kernel and is enabling the DISTRO_FEATURE
-  'arm-autonomy-guest'.
-
-Images
-------
-This layer is adding the following images:
-
-* arm-autonomy-host-image-minimal: This image includes all elements required
-  to create a minimal arm-autonomy-host system. This includes xen, and tools to
-  manage xen guests and xenguest images. This image depends on
- 'arm-autonomy-host' distribution feature.
-
-Recipes and classes
--------------------
-This layer adds the following recipes and classes:
-
-* [xen-devicetree](documentation/xen-devicetree.md): This is a recipe to modify
-  a device tree blob to add information required to boot xen and a Dom0 linux.
-
-* [xenguest-mkimage](documentation/xenguest-mkimage.md): This is a tool used to
-  create and modify images to be used as Xen guests.
-
-* [xenguest-manager](documentation/xenguest-manager.md): This is a tool used to
-  create/remove/start/stop xen guest generated using xenguest-mkimage.
-
-* [xenguest-network](documentation/xenguest-network.md): This
-  recipe add tools and init scripts to create a bridge connected to the
-  external network on the host and allow guests to be connected to it.
 
 Contributing
 ------------
@@ -90,4 +21,3 @@ would like to contribute, please contact the maintainers
 Maintainer(s)
 -------------
 * Diego Sueiro <diego.sueiro@arm.com>
-* Bertrand Marquis <bertrand.marquis@arm.com>

meta-arm-autonomy/classes/alternate-kernel.bbclass

@@ -1,26 +0,0 @@
-# This class is to be inherited by image recipes that want to build and install
-# an alternate kernel (set via PREFERRED_PROVIDER_alternate/kernel).
-#
-# It is mandatory to also set the KERNEL_PACKAGE_NAME for the alternate kernel
-# recipe via KERNEL_PACKAGE_NAME_pn-${PREFERRED_PROVIDER_alternate/kernel} and
-# its value needs to be different from "kernel" since this is the default set
-# for PREFERRED_PROVIDER_virtual/kernel.
-#
-# An example of these settings can be found at meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc
-#
-# When building and installing an alternate kernel, the kernel-modules packages
-# for both virtual/kernel and alternate/kernel will be installed.
-
-PREFERRED_PROVIDER_alternate/kernel ??= ""
-
-python () {
-    alternate_kernel = d.getVar('PREFERRED_PROVIDER_alternate/kernel')
-    if alternate_kernel:
-        alternate_kernel_pkg_name = d.getVar('KERNEL_PACKAGE_NAME_pn-%s' % alternate_kernel)
-        if alternate_kernel_pkg_name:
-            d.appendVar('EXTRA_IMAGEDEPENDS', ' ' + alternate_kernel)
-            d.appendVar('IMAGE_INSTALL', ' kernel-modules')
-            d.appendVar('IMAGE_INSTALL', ' ' + alternate_kernel_pkg_name + '-modules')
-        else:
-            raise bb.parse.SkipRecipe("No KERNEL_PACKAGE_NAME_pn-%s set" % alternate_kernel )
-}

meta-arm-autonomy/classes/arm-autonomy-features.bbclass

@@ -1,5 +0,0 @@
-# Include arm-autonomy distro config files if the distro features are set
-
-require ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', '${ARM_AUTONOMY_DISTRO_CFGDIR}/arm-autonomy-host.inc', '', d)}
-require ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-guest', '${ARM_AUTONOMY_DISTRO_CFGDIR}/arm-autonomy-guest.inc', '', d)}
-

meta-arm-autonomy/classes/docker_extern_containers.bbclass

@@ -1,115 +0,0 @@
-# Docker Extern Containers
-#
-# This class allows docker image tarballs to be installed in the rootfs
-#
-# The images can be selected using the variable CONTAINER_IMAGE_FILES which
-# should contain a space seperated list of absolute paths or yocto urls for
-# docker images that have been exported using docker export:
-# - https://docs.docker.com/engine/reference/commandline/export/
-#
-# src_uri_parse_var.bbclass is used to parse CONTAINER_IMAGE_FILES
-#
-# There are 4 supported formats for CONTAINER_IMAGE_FILES entries:
-#
-# - http/https url
-#   - CONTAINER_IMAGE_FILES = "https://[url]:[port]/alpine.tar;md5sum=..."
-#
-# - file:// absolute local path from root
-#   - CONTAINER_IMAGE_FILES = "file:///containers/alpine2.tar"
-#
-# - file:// path relative to FILESEXTRAPATHS
-#   - CONTAINER_IMAGE_FILES = "file://foo/alpine3.tar"
-#     FILESEXTRAPATHS .= "/containers:"
-#
-# - plain absolute local path from root
-#   - CONTAINER_IMAGE_FILES = "/containers/foo/bar/alpine4.tar"
-#
-# It is not recommended to use other yocto URL types, as they may result in
-# undefined behaviour.
-#
-# A semicolon seperated list of install arguments can follow each image path:
-# - conname : the name that will be attached when the image is imported
-#             (default: [filename, without extension])
-# - contag  : the tag that will be attached when the image is imported
-#             (default: local)
-# - conkeep : Flag for whether the exported container image file should be
-#             kept once the import has been completed
-#             (default: 0)
-#
-# Any other arguments, for example an md5sum, will be assumed to be fetch
-# arguments, and will be kept when the path is added to the SRC_URI
-#
-# e.g.  CONTAINER_IMAGE_FILES = "\
-# https://[url]:[port]/alpine.tar;md5sum=[checksum];conkeep=1 \
-# file:///containers/alpine2.tar;contag=latest;conname=docker2 \
-# file://foo/alpine3.tar \
-# /containers/foo/bar/alpine4.tar;contag=1.0;conkeep=1 "
-#
-# Resulting Manifest:
-# ARCHIVE     NAME    TAG    KEEP
-# alpine.tar  alpine  local  1
-# alpine2.tar docker2 latest 0
-# alpine3.tar alpine3 local  0
-# alpine4.tar alpine4 1.0    1
-#
-# Other configurable variables:
-# CONTAINERS_INSTALL_DIR  : The folder underneath ${WORKDIR} where the docker
-#                           images will be stored
-#                           (default: "/usr/share/docker/images")
-# CONTAINERS_MANIFEST     : The name of the manifest file containing image
-#                           parameters, also stored in CONTAINERS_INSTALL_DIR
-#                           (default: "containers.manifest")
-# CONTAINERS_TAG_DEFAULT  : Use this to change the value that will be used as
-#                           contag if no value is provided
-#                           (default: "local")
-# CONTAINERS_KEEP_DEFAULT : Use this to change the value that will be used for
-#                           conkeep if no value is provided
-#                           (default: "0")
-#
-
-inherit features_check
-
-REQUIRED_DISTRO_FEATURES = "docker"
-
-RDEPENDS_${PN} = "packagegroup-docker-runtime-minimal"
-
-CONTAINER_IMAGE_FILES ??= ""
-CONTAINERS_INSTALL_DIR ??= "${datadir}/docker/images"
-CONTAINERS_MANIFEST ??= "containers.manifest"
-CONTAINERS_TAG_DEFAULT ??= "local"
-CONTAINERS_KEEP_DEFAULT ??= "0"
-
-inherit set_src_uri_from_var
-
-SRC_URI_FROM_VAR_NAME = "CONTAINER_IMAGE_FILES"
-# Define installation params
-SRC_URI_FROM_VAR_MANIFEST_PARAMS = "conname=[basename] \
-contag=${CONTAINERS_TAG_DEFAULT} conkeep=${CONTAINERS_KEEP_DEFAULT}"
-
-SRC_URI_FROM_VAR_UNPACK_DIR = "containers"
-
-# Read manifest and install container images
-do_install() {
-    local archive name tag keep
-
-    if [ -f "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/manifest" ]; then
-
-        install -d "${D}${CONTAINERS_INSTALL_DIR}"
-        install -m 644 \
-            "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/manifest" \
-            "${D}${CONTAINERS_INSTALL_DIR}/${CONTAINERS_MANIFEST}"
-
-        while read -r archive name tag keep _; do
-            [ -f "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/${archive}" ] ||
-                bbfatal "${archive} does not exist"
-
-            install -m 644 \
-                "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/${archive}" \
-                "${D}${CONTAINERS_INSTALL_DIR}/${archive}"
-        done < "${D}${CONTAINERS_INSTALL_DIR}/${CONTAINERS_MANIFEST}"
-    fi
-}
-
-do_install[vardeps] += "CONTAINER_IMAGE_FILES"
-
-FILES_${PN} += "${CONTAINERS_INSTALL_DIR}"

meta-arm-autonomy/classes/image_types_xenguest.bbclass

@@ -1,169 +0,0 @@
-# Create a xenguest image with kernel and filesystem produced by Yocto
-# This will create a .xenguest file that the xenguest-manager can use.
-
-inherit xenguest_image
-
-# We are creating our guest in a local subdirectory
-# force the value so that we are not impacted if the user is changing it
-XENGUEST_IMAGE_DEPLOY_DIR = "${WORKDIR}/tmp-xenguest"
-
-# Name of deployed file (keep standard image name and add .xenguest)
-XENGUEST_IMAGE_DEPLOY ??= "${IMAGE_NAME}"
-
-# Add kernel XENGUEST_IMAGE_KERNEL from DEPLOY_DIR_IMAGE to image
-xenguest_image_add_kernel() {
-    srcfile="${1:-}"
-    if [ -z "${srcfile}" ]; then
-        srcfile="${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_KERNEL}"
-    fi
-    call_xenguest_mkimage partial --xen-kernel=$srcfile
-}
-
-# Add rootfs file to the image
-xenguest_image_add_rootfs() {
-    call_xenguest_mkimage partial \
-        --disk-add-file=${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${IMAGE_TYPEDEP_xenguest}:rootfs.${IMAGE_TYPEDEP_xenguest}
-}
-
-# Pack xenguest image
-xenguest_image_pack() {
-    mkdir -p ${IMGDEPLOYDIR}
-    rm -f ${IMGDEPLOYDIR}/${XENGUEST_IMAGE_DEPLOY}.xenguest
-    call_xenguest_mkimage pack \
-        ${IMGDEPLOYDIR}/${XENGUEST_IMAGE_DEPLOY}.xenguest
-}
-
-#
-# Task finishing the bootimg
-# We need this task to actually create the symlinks
-#
-python do_bootimg_xenguest() {
-    subtasks = d.getVarFlag('do_bootimg_xenguest', 'subtasks')
-
-    bb.build.exec_func('xenguest_image_clone', d)
-    if subtasks:
-        for tk in subtasks.split():
-            bb.build.exec_func(tk, d)
-    bb.build.exec_func('xenguest_image_pack', d)
-    bb.build.exec_func('create_symlinks', d)
-}
-# This is used to add sub-tasks to do_bootimg_xenguest
-do_bootimg_xenguest[subtasks] = ""
-# Those are required by create_symlinks to find our image
-do_bootimg_xenguest[subimages] = "xenguest"
-do_bootimg_xenguest[imgsuffix] = "."
-do_bootimg_xenguest[depends] += "xenguest-base-image:do_deploy"
-# Need to have rootfs so all recipes have deployed their content
-do_bootimg_xenguest[depends] += "${PN}:do_rootfs"
-
-# This set in python anonymous after, just set a default value here
-IMAGE_TYPEDEP_xenguest ?= "tar"
-
-# We must not be built at rootfs build time because we need the kernel
-IMAGE_TYPES_MASKED += "xenguest"
-IMAGE_TYPES += "xenguest"
-
-XENGUEST_IMAGE_RECIPE = "${PN}"
-XENGUEST_IMAGE_VARS += "XENGUEST_IMAGE_RECIPE"
-
-# Merge intermediate env files from all recipes into a single file
-python do_merge_xenguestenv () {
-
-    import re
-
-    # Open final merged file in DEPLOY_DIR_IMAGE for writing, or create
-    outdir = d.getVar('DEPLOY_DIR_IMAGE')
-    with open(os.path.join(outdir,'xenguest.env'), 'w') as merged_file:
-
-        # Adds vars from xenguest_image to list
-        merged_env = []
-        xenguest_vars = d.getVar('XENGUEST_IMAGE_VARS')
-        for var in xenguest_vars.split():
-            value = d.getVar(var)
-            if value:
-                merged_env.append(var + "=" + " ".join(value.split()) + "\n")
-
-        # Resolve dependencies for this task to find names of intermediate
-        # .xenguestenv files
-        taskdepdata = d.getVar('BB_TASKDEPDATA')
-        task_mc = d.getVar('BB_CURRENT_MC')
-        task_file = d.getVar('FILE')
-
-        # See runqueue.py function build_taskdepdata
-        DEPS_INDEX = 3
-
-        depdata_key = task_file + ":do_merge_xenguestenv"
-
-        # If in a multiconfig, need to add that to the key
-        if task_mc != "default":
-            depdata_key = "mc:" + task_mc + ":" + depdata_key
-
-        # Retrieve filename using regex
-        get_filename = re.compile(r'/([^/]+\.bb):do_deploy_xenguestenv$')
-        env_dir = d.getVar('XENGUEST_ENV_STAGING_DIR')
-
-        for task_dep in taskdepdata[depdata_key][DEPS_INDEX]:
-            if task_dep.endswith(":do_deploy_xenguestenv"):
-                filename = re.search(get_filename, task_dep).group(1) + ".xenguestenv"
-                bb.note("Merging: " + filename)
-                try:
-                    with open(env_dir + "/" + filename, 'r') as f:
-                        # Eliminate duplicates
-                        merged_env = list(set(merged_env + f.readlines()))
-                except (FileNotFoundError, IOError):
-                    bb.note(" " + filename + " has no extra vars")
-
-        # Sort Alphabetically and write
-        merged_env.sort()
-        merged_file.write("".join(merged_env))
-}
-do_merge_xenguestenv[dirs] = "${DEPLOY_DIR_IMAGE}"
-do_merge_xenguestenv[vardeps] += "${XENGUEST_IMAGE_VARS}"
-do_merge_xenguestenv[vardepsexclude] += "BB_TASKDEPDATA"
-do_merge_xenguestenv[recrdeptask] += "do_deploy_xenguestenv"
-
-addtask merge_xenguestenv before do_populate_lic_deploy after do_image_complete
-
-python __anonymous() {
-    # Do not do anything if we are not in the want FSTYPES
-    if bb.utils.contains_any('IMAGE_FSTYPES', 'xenguest', '1', '0', d):
-
-        # Check the coherency of the configuration
-        rootfs_needed = False
-        rootfs_file = ''
-        kernel_needed = False
-
-        rootfs_file = xenguest_image_rootfs_file(d)
-        if rootfs_file:
-            rootfs_needed = True
-
-        if d.getVar('XENGUEST_IMAGE_KERNEL') and not d.getVar('INITRAMFS_IMAGE'):
-            # If INITRAMFS_IMAGE is set, even if INITRAMFS_IMAGE_BUNDLE is not
-            # set to 1 to bundle the initramfs with the kernel, kernel.bbclass
-            # is setting a dependency on ${PN}:do_image_complete. We cannot
-            # in this case depend on do_deploy as it would create a circular
-            # dependency:
-            # do_image_complete would depend on kernel:do_deploy which would
-            # depend on ${PN}:do_image_complete
-            # In the case INITRAMFS_IMAGE_BUNDLE = 1, the kernel-xenguest class
-            # will handle the creation of a xenguest image with the kernel.
-            # In the other case the kernel can be added manually to the image.
-            kernel_needed = True
-
-        bb.build.addtask('do_bootimg_xenguest', 'do_image_complete', None, d)
-
-        if rootfs_needed:
-            # tell do_bootimg_xenguest to call add_rootfs
-            d.appendVarFlag('do_bootimg_xenguest', 'subtasks', ' xenguest_image_add_rootfs')
-            # do_bootimg_xenguest will need the tar file
-            d.appendVarFlag('do_bootimg_xenguest', 'depends', ' %s:do_image_tar' % (d.getVar('PN')))
-            # set our TYPEDEP to the proper compression
-            d.setVar('IMAGE_TYPEDEP_xenguest', 'tar' + (rootfs_file.split('.tar', 1)[1] or ''))
-
-        if kernel_needed:
-            # Tell do_bootimg_xenguest to call xenguest_image_add_kernel
-            d.appendVarFlag('do_bootimg_xenguest', 'subtasks', ' xenguest_image_add_kernel')
-            # we will need kernel do_deploy
-            d.appendVarFlag('do_bootimg_xenguest', 'depends', ' virtual/kernel:do_deploy')
-}
-

meta-arm-autonomy/classes/kernel-xenguest.bbclass

@@ -1,37 +0,0 @@
-# Create a xenguest image containing the kernel with initramfs when
-# initramfs is activated
-# This is done using kernel-fitimage as model
-# To activate this, kernel-xenguest must be added to KERNEL_CLASSES
-
-# Add a variable name to XENGUEST_IMAGE_VARS_EXTRA if you want it to
-# appear in xenguest.env when the image is deployed
-
-inherit xenguest_image
-
-# use a local copy to pack all together
-XENGUEST_IMAGE_DEPLOY_DIR = "${WORKDIR}/tmp-xenguest"
-
-python __anonymous () {
-    # only if xenguest image type is present
-    if bb.utils.contains('IMAGE_FSTYPES', 'xenguest', '1', '0', d):
-        # only if initramfs bundle is activated
-        if d.getVar('INITRAMFS_IMAGE') and d.getVar('INITRAMFS_IMAGE_BUNDLE') == "1":
-            if not bb.utils.contains('KERNEL_IMAGETYPES', 'Image', '1', '0', d):
-                bb.fatal("xenguest image type with initramfs require Image kernel image type")
-            bb.build.addtask('do_assemble_xenguest_initramfs', 'do_deploy', 'do_bundle_initramfs', d)
-}
-
-do_assemble_xenguest_initramfs() {
-    xenguest_image_clone
-    call_xenguest_mkimage partial --xen-kernel=${B}/${KERNEL_OUTPUT_DIR}/Image.initramfs
-    rm -f ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest
-    call_xenguest_mkimage pack ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest
-}
-do_assemble_xenguest_initramfs[depends] += "${INITRAMFS_IMAGE}:do_merge_xenguestenv"
-
-kernel_do_deploy_append() {
-    if [ -f "${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest" ]; then
-        install -m 0644 ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest "$deployDir/Image-${INITRAMFS_NAME}.xenguest"
-        ln -snf Image-${INITRAMFS_NAME}.xenguest $deployDir/Image-${INITRAMFS_LINK_NAME}.xenguest
-    fi
-}

meta-arm-autonomy/classes/set_src_uri_from_var.bbclass

@@ -1,224 +0,0 @@
-# Set SRC_URI from Variable
-
-# This class parses a variable named in SRC_URI_FROM_VAR_NAME for entries that
-# should be added to the SRC_URI
-#
-# There are 4 supported formats for entries:
-#
-# - http/https url
-#   - Note that a checksum (md5sum or sha256sum) must be provided for http(s)
-#
-# - file:// absolute local path from root
-#   - In this case the filename will be added to SRC_URI and the path from '/'
-#   added to FILESEXTRAPATHS
-#
-# - file:// path relative to FILESEXTRAPATHS
-#   - In this case the filename will be added to SRC_URI and the preceding path
-#   added to FILESOVERRIDES, so that the full path to the file will
-#   be available in FILESPATH when it is generated by combining
-#   FILESEXTRAPATHS and FILESOVERRIDES.
-#
-# - plain absolute local path from root
-#   - This will be treated the same as an file:// path from root. Plain paths
-#   must be absolute, and cannot be relative to FILESEXTRAPATHS
-#
-# It is not recommended to use other yocto URL types, as they may result in
-# undefined behaviour.
-#
-# These entries will be added to the SRC_URI so that the yocto fetcher can
-# unpack a copy into ${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}
-#
-#
-# A list of arguments can follow each entry in the input variable, seperated
-# by semi-colons (;). Arguments may be FETCH arguments or MANIFEST arguments.
-#
-# FETCH arguments will be appended to the entry in SRC_URI, for example
-# "downloadfilename" to specify the filename used when storing a
-# downloaded file.
-# Each SRC_URI entry will automatically have the arguments
-# "unpack=0;subdir=${SRC_URI_FROM_VAR_UNPACK_DIR}" added to them, so do not
-# attempt to set these options.
-#
-# MANIFEST arguments are defined in the variable
-# SRC_URI_FROM_VAR_MANIFEST_PARAMS which should be a space seperated list of
-# names, each optionally followed by an equals sign (=) and a default value.
-#
-# The values provided for the manifest arguments will be written to the manifest
-# file in ${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR} as columns, in the same
-# order as they appear in SRC_URI_FROM_VAR_MANIFEST_PARAMS.
-#
-# For entries that do not provide a value for a manifest argument, the default
-# value will be used if possible.
-# If no default is availale, omitting the parameter on any item will cause
-# an error.
-#
-# "[basename]" is a special case default that will set the value to
-# the filename without the path or file extension.
-#
-# e.g.
-# SRC_URI_FROM_VAR_MANIFEST_PARAMS="conname=[basename] contag=local conkeep"
-#
-# Any arguments that follow an entry in SRC_URI_FROM_VAR_NAME, that are not
-# named in SRC_URI_FROM_VAR_MANIFEST_PARAMS are assumed to be FETCH arguments,
-# so are added to the corresponding entry in the SRC_URI.
-
-SRC_URI_FROM_VAR_NAME ??= ""
-SRC_URI_FROM_VAR_MANIFEST_PARAMS ??= ""
-SRC_URI_FROM_VAR_UNPACK_DIR ??= "items"
-
-python __anonymous() {
-
-    parse_var = d.getVar('SRC_URI_FROM_VAR_NAME')
-
-    if not parse_var:
-        return
-
-    parse_var_items = d.getVar(parse_var)
-
-    if parse_var_items:
-        for item in parse_var_items.split(' '):
-            if not item:
-                continue
-
-            if item.startswith('/'):
-                # If not a Yocto URL, must be an absolute path
-                yocto_url = "file://" + item
-            else:
-                # Otherwise assume valid Yocto URL.
-                # Error case is caught later
-                yocto_url = item
-
-            fetcher = host = path = parm = None
-            try:
-                # Attempt to parse a Yocto URL
-                fetcher,host,path,_,_,parm = bb.fetch.decodeurl(yocto_url)
-            except:
-                # Something invalid is in the variable!
-                raise bb.parse.SkipRecipe(parse_var + \
-                                          " contains an invalid entry:\n'" + \
-                                          item + "'")
-
-            # This var is space seperated list of parameter names,
-            # with optional default value following an equals sign
-            # (name=default)
-            item_params_str = d.getVar('SRC_URI_FROM_VAR_MANIFEST_PARAMS')
-
-            # remove directories from path
-            filename = os.path.basename(path)
-
-            if "downloadfilename" in parm:
-                filename = parm["downloadfilename"]
-
-            item_manifest_args = {"filename": filename}
-
-            if item_params_str:
-                # required manifest arguments have been provided
-
-                # If no default is given add "=" for map parsing
-                item_params_list = [ arg + "=" if '=' not in arg
-                                     else arg
-                                     for arg in item_params_str.split(' ')
-                                   ]
-
-                # Generate key value pairs of argument names and
-                # default values
-                item_params_map = dict( (name.strip(), val.strip())
-                                        for name, val in (arg.split('=')
-                                        for arg in item_params_list)
-                                      )
-
-                for argname in item_params_map:
-                    # Iterate over required manifest arguments
-
-                    argvalue = parm.pop(argname, None)
-                    if argvalue:
-                        # a value has been provided for this item
-                        item_manifest_args[argname] = argvalue
-
-                    else:
-                        # No value provided, process default value
-                        default = item_params_map[argname]
-                        if default:
-                            # A default value is provided
-                            if default == "[basename]":
-                                # use the filename without extension
-                                default = os.path.splitext(filename)[0]
-
-                            # store default value in dict
-                            item_manifest_args[argname] = default
-
-                        else:
-                            # No default provided
-                            raise bb.fatal(parse_var + \
-                              " entry is missing a required parameter '" + \
-                              argname + "':\n'" + item + "'")
-
-            # Write value to var flags to ensure data structure is preserved
-            # Each entry of parse_var will have a varflag  where the value
-            # is a dictionary of argument names and values
-            d.setVarFlags(parse_var, {item: item_manifest_args})
-
-            src_uri_entry_suffix = ';'
-
-            # HTTP(S) fetcher must provide a checksum
-            if fetcher.startswith('http') and not \
-            ( 'md5sum' in parm or 'sha256sum' in parm ):
-                # Ensure http/https fetchers get a checksum
-                raise bb.parse.SkipRecipe(parse_var + \
-                                          " entry is missing a checksum:\n'" + \
-                                          item + "'")
-
-            # add remaining fetch parameters including checksum
-            for arg in parm:
-                src_uri_entry_suffix += ";" + arg + "=" + parm[arg]
-
-            # Add default and extra parameters to SRC_URI entry
-            src_uri_entry_suffix += ';unpack=0;subdir=' + \
-                                    d.getVar('SRC_URI_FROM_VAR_UNPACK_DIR')
-
-            if fetcher == 'file':
-                # Prevent local fetcher from re-creating dir structure
-                filedir = os.path.split(path)[0]
-                if filedir.startswith('/'):
-                    # Path is from the root
-                    d.appendVar('FILESEXTRAPATHS', filedir + ':')
-                else:
-                    # Path is relative to FILESEXTRAPATHS
-                    d.appendVar('FILESOVERRIDES', ':' + filedir)
-
-                # Add filename without path to SRC_URI
-                d.appendVar('SRC_URI', ' file://' + \
-                                        filename + src_uri_entry_suffix)
-            else:
-                # Add full entry to SRC_URI
-                d.appendVar('SRC_URI', ' ' + fetcher + \
-                            "://" + host + path + src_uri_entry_suffix)
-}
-
-python generate_manifest() {
-
-    parse_var = d.getVar('SRC_URI_FROM_VAR_NAME')
-
-    if not parse_var:
-        return
-
-    target_dir = os.path.join(d.getVar('WORKDIR'),
-                              d.getVar('SRC_URI_FROM_VAR_UNPACK_DIR'))
-
-    # Write a manifest file containing the parameters so SRC_URI
-    # doesn't need to be parsed by do_install
-    with open (target_dir + "/manifest", 'w') as manifest_file:
-        manifest_args = d.getVarFlags(parse_var)
-
-        parse_var_items = d.getVar(parse_var)
-
-        if parse_var_items:
-            for item in parse_var_items.split():
-
-                manifest_file.write(" ".join(manifest_args[item].values())+"\n")
-
-}
-
-do_unpack[cleandirs] += "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}"
-do_unpack[postfuncs] += "generate_manifest"
-do_unpack[vardeps] += "${SRC_URI_FROM_VAR_NAME}"

meta-arm-autonomy/classes/xenguest_image.bbclass

@@ -1,251 +0,0 @@
-# This class must be used to create, extend or pack a xenguest image.
-# It is using xenguest-mkimage tool to do operations
-
-DEPENDS += "xenguest-mkimage-native"
-
-#
-# Xenguest image parameters
-# All the following parameters can be modified in local.conf or on recipes
-# inheriting this class
-#
-
-# Guest memory size in MB
-XENGUEST_IMAGE_MEMORY_SIZE ??= "512"
-
-# Guest number of vcpus
-XENGUEST_IMAGE_NUM_VCPUS ??= "1"
-
-# Guest auto boot during init, set to 1 to have guest started during init or
-# to 0 if the guest should not be auto started
-XENGUEST_IMAGE_AUTOBOOT ??= "1"
-
-# Partition containing the root file system
-# Xen will actually add root=${XENGUEST_IMAGE_ROOT} to your guest kernel
-# command line
-# You can let this empty if the root filesystem is specified in an other way
-# and have root= option added to the command line for example or if you don't
-# need a root filesystem mounted for your guest (initrd for example)
-XENGUEST_IMAGE_ROOT ??= "/dev/xvda1"
-
-# Guest kernel command line arguments
-XENGUEST_IMAGE_CMDLINE ??= "earlyprintk=xenboot console=hvc0 rw"
-
-# Extra commands to add to xenguest_image when creating the image
-XENGUEST_IMAGE_EXTRA_CMD ??= ""
-
-# Kernel binary
-# This value is used by the xenguest image type but is declared here to have
-# all variables in the same place
-# If this value is empty no kernel will be added to the image
-XENGUEST_IMAGE_KERNEL ??= "Image"
-
-# Size of the disk to create (if 0 no disk will be created and rootfs will not
-# be included in the xenguest image)
-XENGUEST_IMAGE_DISK_SIZE ??= "${@ '4' if not d.getVar('INITRAMFS_IMAGE') else '0'}"
-
-# set empty partition to be used by xenguest-manager for this image
-XENGUEST_IMAGE_DISK_DEVICE ??= ""
-
-#
-# XENGUEST_IMAGE_DISK_PARTITIONS is used to describe the partitions to setup
-# and their content.
-# It must be set to a space separated list of entries with each entry having
-# the format num:sz:[fs]:[file] where:
-# - num is a partition number
-# - sz is the partition size in MB or GB(default), e.g 1000M or 1[G]
-# - fs is optional filesystem to use for the partition
-# - file is optionally pointing to a file to use as content of the partition
-#   Please check image_types_xenguest.bbclass for rootfs handling of files
-#
-# Default value creates a partition 1 using the full disk, formated with ext4
-# and containing the root filesystem produced by Yocto
-XENGUEST_IMAGE_DISK_PARTITIONS ??= "1:${XENGUEST_IMAGE_DISK_SIZE}:ext4:rootfs.tar.gz"
-
-# XENGUEST_IMAGE_NETWORK_TYPE can be set to "bridge", "nat" or "none".
-# The "bridge" type will share the physical eth interface from dom0 with the
-# domU. This will allow the domU to have access to the external network.
-# The "nat" type will setup a virtual network between dom0 and domU and also
-# configure and run the kea dhcp4 server on dom0 to serve the domU.
-# The "none" type will not affect any networking setting between on dom0 and
-# domU.
-XENGUEST_IMAGE_NETWORK_TYPE ??= "bridge"
-
-# Sub-directory in wich the guest is created. This is create in deploy as a
-# subdirectory and must be coherent between all components using this class so
-# it must only be modified from local.conf if needed
-XENGUEST_IMAGE_DEPLOY_SUBDIR ?= "xenguest"
-
-# Directory in which the xenguest should be deployed
-# a sub-directory named ${XENGUEST_IMAGE_DEPLOY_SUBDIR} will be created there.
-# This should be set to:
-# - ${DEPLOYDIR} (default) if creating or extending the xenguest for a normal
-#   recipe.
-# - something in ${WORKDIR} if you need to clone and manipulate an image
-XENGUEST_IMAGE_DEPLOY_DIR ??= "${DEPLOYDIR}"
-
-# These vars are used by image_types_xenguest.bbclass to generate the
-# xenguest.env file. In a recipe that inherits this class and extra variables
-# that should be included in xenguest.env need to be added to
-# XENGUEST_IMAGE_VARS_EXTRA
-XENGUEST_IMAGE_VARS ?= "\
- MACHINE DISTRO DISTRO_VERSION DISTRO_FEATURES TUNE_FEATURES TARGET_FPU \
- IMAGE_FEATURES INITRAMFS_IMAGE_BUNDLE INITRAMFS_IMAGE \
- XENGUEST_IMAGE_MEMORY_SIZE XENGUEST_IMAGE_NUM_VCPUS XENGUEST_IMAGE_AUTOBOOT \
- XENGUEST_IMAGE_ROOT XENGUEST_IMAGE_CMDLINE XENGUEST_IMAGE_EXTRA_CMD \
- XENGUEST_IMAGE_KERNEL XENGUEST_IMAGE_DISK_SIZE XENGUEST_IMAGE_DISK_DEVICE \
- XENGUEST_IMAGE_DISK_PARTITIONS XENGUEST_IMAGE_NETWORK_TYPE"
-
-#
-# Wrapper to call xenguest-mkimage
-# It is using XENGUEST_IMAGE_DEPLOY_DIR and XENGUEST_IMAGE_DEPLOY_SUBDIR
-# to find the image to operate on
-#
-# Usage: call_xenguest_mkimage [operation] [args]
-call_xenguest_mkimage() {
-    local cmd="${1}"
-    local img="${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}"
-    shift
-
-    echo "xenguest-mkimage $cmd $img $@"
-    xenguest-mkimage $cmd $img $@
-}
-
-#
-# Create an initial xenguest image.
-# This is a task which must be added in a recipe inheriting deploy
-# It is using XENGUEST_IMAGE_MEMORY_SIZE, XENGUEST_IMAGE_NUM_VCPUS,
-#  XENGUEST_IMAGE_AUTOBOOT, XENGUEST_IMAGE_ROOT, XENGUEST_IMAGE_EXTRA_CMD,
-#  XENGUEST_IMAGE_CMDLINE, XENGUEST_IMAGE_DISK_SIZE and
-#  XENGUEST_IMAGE_DISK_PARTITIONS to customize the initial guest
-#
-xenguest_image_create() {
-    if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
-        -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
-        die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"
-    fi
-
-    rm -rf ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
-
-    mkdir -p ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
-
-    # Create the image
-    call_xenguest_mkimage create --xen-memory=${XENGUEST_IMAGE_MEMORY_SIZE} \
-        --xen-vcpus=${XENGUEST_IMAGE_NUM_VCPUS} \
-        --xen-root=${XENGUEST_IMAGE_ROOT} \
-        ${XENGUEST_IMAGE_EXTRA_CMD}
-
-    # add command line
-    if [ -n "${XENGUEST_IMAGE_CMDLINE}" ]; then
-        call_xenguest_mkimage update --xen-clean-extra
-        for arg in ${XENGUEST_IMAGE_CMDLINE}; do
-            call_xenguest_mkimage update --xen-extra=$arg
-        done
-    fi
-
-    # create disk if needed
-    disksize="${XENGUEST_IMAGE_DISK_SIZE}"
-    case ${disksize:=0} in
-        0|0M|0G)
-            ;;
-        *)
-            # setup disk size
-            call_xenguest_mkimage update --disk-reset-config --disk-size=$disksize
-
-            diskparts="${XENGUEST_IMAGE_DISK_PARTITIONS}"
-            if [ -n "$diskparts" ]; then
-                for arg in $diskparts; do
-                    call_xenguest_mkimage update --disk-add-part=$arg
-                done
-            fi
-            diskdevice="${XENGUEST_IMAGE_DISK_DEVICE}"
-            if [ -n "$diskdevice" ]; then
-                call_xenguest_mkimage update --disk-device="${diskdevice}"
-            fi
-
-            ;;
-    esac
-
-
-    if [ "${XENGUEST_IMAGE_AUTOBOOT}" = "1" ]; then
-        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=1
-    else
-        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=0
-    fi
-
-    if [ -n "${XENGUEST_IMAGE_NETWORK_TYPE}" ]; then
-        call_xenguest_mkimage update --set-param=XENGUEST_NETWORK_TYPE="${XENGUEST_IMAGE_NETWORK_TYPE}"
-    else
-        call_xenguest_mkimage update --set-param=XENGUEST_NETWORK_TYPE="none"
-    fi
-}
-
-XENGUEST_ENV_STAGING_DIR ??= "${STAGING_DIR}/${MACHINE}/xenguestenv"
-
-# Create an intermediary file containing all variables used to by a
-# particular recipe that inherits this class
-
-# File will contain the values of all variables listed in:
-#   XENGUEST_IMAGE_VARS_EXTRA
-python do_deploy_xenguestenv () {
-    xenguest_vars = d.getVar('XENGUEST_IMAGE_VARS_EXTRA')
-    if not xenguest_vars:
-        return
-
-    outdir = d.getVar('XENGUEST_ENV_STAGING_DIR')
-
-    # Writes file to tmp/sysroots/${MACHINE}/xenguestenv/ by default
-    filename = os.path.basename(d.getVar('FILE')) + '.xenguestenv'
-    with open(os.path.join(outdir, filename), 'w') as envf:
-        for var in xenguest_vars.split():
-            value = d.getVar(var)
-            if value:
-                # Write value only if set
-                envf.write('%s="%s"\n' % (var, " ".join(value.split())))
-        envf.close()
-}
-
-# Since the intermediary file is deleted by do_merge_xenguestenv it
-# must be re-created every time
-do_deploy_xenguestenv[vardeps] += "${XENGUEST_IMAGE_VARS_EXTRA}"
-do_deploy_xenguestenv[dirs] = "${XENGUEST_ENV_STAGING_DIR}"
-
-addtask deploy_xenguestenv before do_populate_sysroot
-
-# Clone the current xenguest from deploy to manipulate it locally
-# This is required if you need to change things before packing an image
-# To set the local directory where to clone you must set
-# XENGUEST_IMAGE_DEPLOY_DIR if you don't want to use do_deploy to modify the
-# image
-#
-xenguest_image_clone() {
-    if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
-        -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
-        die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"
-    fi
-
-    if [ ! -f ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}/guest.cfg ]; then
-        die "xenguest_image: ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR} does not contain a valid guest"
-    fi
-
-    rm -rf ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
-    mkdir -p ${XENGUEST_IMAGE_DEPLOY_DIR}
-    cp -rf ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR} \
-        ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
-}
-
-# Helper function to retrieve rootfs file if present in one partition
-# This can return an empty string or rootfs.tar[.COMP]
-def xenguest_image_rootfs_file(d):
-    disksize = d.getVar('XENGUEST_IMAGE_DISK_SIZE')
-    # if disksize is 0, we don't create anything
-    if not disksize or disksize == '0':
-        return ""
-    # Find first partition with file=rootfs.tar*
-    partlist = d.getVar('XENGUEST_IMAGE_DISK_PARTITIONS')
-    if partlist:
-        for partdesc in partlist.split():
-            partelems = partdesc.split(':', 3)
-            if partelems[3]:
-                if partelems[3].startswith('rootfs.tar'):
-                    return partelems[3]
-    return ""

meta-arm-autonomy/classes/xenguest_image_extra.bbclass

@@ -1,123 +0,0 @@
-# This class must be used to extend the xenguest image
-# It provides variables to add init scripts, a dtb, xen files or disk files.
-#
-# The class is extending deploy function so you recipe must inherit deploy and
-# have a do_deploy function (even if it is empty)
-
-# Add a variable name to XENGUEST_IMAGE_VARS_EXTRA if you want it to
-# appear in xenguest.env when the image is deployed
-
-# Use standard xenguest_image
-inherit xenguest_image
-
-# Add a DTB file for the guest
-# Only one file should be added, if this is set multiple times or in several
-# recipes, the last recipe setting it will prevail.
-XENGUEST_EXTRA_DTB ??= ""
-
-# Add a ramdisk file for the guest
-# Only one file should be added, if this is set multiple times or in several
-# recipes, the last recipe setting it will prevail.
-XENGUEST_EXTRA_RAMDISK ??= ""
-
-# Append something to the guest xen configuration
-# All files here will be merged together in the final xen configuration
-# This can contain several files or be used in several recipes
-XENGUEST_EXTRA_XENCONFIG ??= ""
-
-# Add a xenguest init, init-pre or init-post script
-XENGUEST_EXTRA_INIT_PRE ??= ""
-XENGUEST_EXTRA_INIT ??= ""
-XENGUEST_EXTRA_INIT_POST ??= ""
-
-# Add xenguest files, (to be used in extra xen config for example)
-# several files may be added, space separated, the path will be kept on the
-# generated xenguest image (if dir1/file1 is added, it can be used as
-# dir1/file1 file in the xen configuration).
-XENGUEST_EXTRA_FILES ??= ""
-
-# Add xenguest disk files (to be used as disk partition content)
-# several files may be added, space separated, the path will be kept on the
-# generated xenguest image (if dir1/file1 is added, it can be used as
-# dir1/file1 file in the disk content parameters).
-XENGUEST_EXTRA_DISK_FILES ??= ""
-
-# Extra vars to be written to xenguest.env
-XENGUEST_IMAGE_VARS_EXTRA += "\
- XENGUEST_EXTRA_DTB XENGUEST_EXTRA_RAMDISK XENGUEST_EXTRA_XENCONFIG \
- XENGUEST_EXTRA_INIT_PRE XENGUEST_EXTRA_INIT XENGUEST_EXTRA_INIT_POST \
- XENGUEST_EXTRA_FILES XENGUEST_EXTRA_DISK_FILES"
-
-do_deploy_append() {
-    if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
-        -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
-        die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"
-    fi
-    rm -rf ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
-    mkdir -p ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
-
-    if [ -n "${XENGUEST_EXTRA_DTB}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_DTB} ]; then
-            die "xenguest_image: DTB file ${XENGUEST_EXTRA_DTB} does not exist"
-        fi
-        call_xenguest_mkimage partial --xen-device-tree=${XENGUEST_EXTRA_DTB}
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_RAMDISK}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_RAMDISK} ]; then
-            die "xenguest_image: DTB file ${XENGUEST_EXTRA_RAMDISK} does not exist"
-        fi
-        call_xenguest_mkimage partial --xen-ramdisk=${XENGUEST_EXTRA_RAMDISK}
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_XENCONFIG}" ]; then
-        for f in ${XENGUEST_EXTRA_XENCONFIG}; do
-            if [ ! -f $f ]; then
-                die "xenguest_image: Xen config $f does not exist"
-            fi
-            call_xenguest_mkimage partial --xen-append=$f
-        done
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_INIT_PRE}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_INIT_PRE} ]; then
-            die "xenguest_image: Init script ${XENGUEST_EXTRA_INIT_PRE} does not exist"
-        fi
-        call_xenguest_mkimage partial --init-pre=${XENGUEST_EXTRA_INIT_PRE}
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_INIT}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_INIT} ]; then
-            die "xenguest_image: Init script ${XENGUEST_EXTRA_INIT} does not exist"
-        fi
-        call_xenguest_mkimage partial --init-script=${XENGUEST_EXTRA_INIT}
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_INIT_POST}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_INIT_POST} ]; then
-            die "xenguest_image: Init script ${XENGUEST_EXTRA_INIT_POST} does not exist"
-        fi
-        call_xenguest_mkimage partial --init-post=${XENGUEST_EXTRA_INIT_POST}
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_FILES}" ]; then
-        for f in ${XENGUEST_EXTRA_FILES}; do
-            if [ ! -f $f ]; then
-                die "xenguest_image: Xen file $f does not exist"
-            fi
-            call_xenguest_mkimage partial --xen-add-file=$f
-        done
-    fi
-
-    if [ -n "${XENGUEST_EXTRA_DISK_FILES}" ]; then
-        for f in ${XENGUEST_EXTRA_DISK_FILES}; do
-            if [ ! -f $f ]; then
-                die "xenguest_image: Disk file $f does not exist"
-            fi
-            call_xenguest_mkimage partial --disk-add-file=$f
-        done
-    fi
-}
-# Need to have xenguest_image tool
-do_deploy[depends] += "xenguest-base-image:do_deploy"
-

meta-arm-autonomy/conf/distro/include/arm-autonomy-guest.inc

@@ -1,15 +0,0 @@
-# This files is added when DISTRO_FEATURES contains arm-autonomy-guest
-
-# We need to have ipv4 activated
-DISTRO_FEATURES_append = " ipv4"
-
-# Build a xenguest type image
-IMAGE_CLASSES += "image_types_xenguest"
-IMAGE_FSTYPES += "xenguest"
-
-# xenguest kernel extension to handle initramfs
-KERNEL_CLASSES += "kernel-xenguest"
-
-IMAGE_INSTALL_append = "${@bb.utils.contains('DISTRO_FEATURES', 'docker', \
-                        ' packagegroup-docker-runtime-minimal', \
-                        '', d)}"

meta-arm-autonomy/conf/distro/include/arm-autonomy-host.inc

@@ -1,26 +0,0 @@
-# This files is added when DISTRO_FEATURES contains arm-autonomy-host
-
-# We need to have xen and ipv4 activated
-DISTRO_FEATURES_append = " xen ipv4"
-DISTRO_FEATURES_NATIVE_append = " arm-autonomy-host"
-
-# Since meta-virtualization master branch bumped to 4.15+stable we need to
-# force the 4.14+stable selection until we validate the new version
-PREFERRED_VERSION_xen = "4.14+stable%"
-PREFERRED_VERSION_xen-tools = "4.14+stable%"
-
-# Don't include kernels in standard images when building arm-autonomy-host
-# If the kernel image is needed in the rootfs the following should be set from
-# a bbappend: RDEPENDS_${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base ?= ""
-
-# Require extra machine specific settings from meta-arm-bsp dynamic-layers only
-# if meta-arm-bsp is in the bblayers.conf
-# Directory for meta-arm-autonomy/dynamic-layers/meta-arm-bsp machine extra settings
-ARM_AUTONOMY_ARM_BSP_DYNAMIC_EXTRA_CFGDIR = "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/conf/machine"
-ARM_AUTONOMY_MACHINE_EXTRA_REQUIRE ?= \
-"${ARM_AUTONOMY_ARM_BSP_DYNAMIC_EXTRA_CFGDIR}/arm-autonomy-machine-extra-settings.inc"
-
-require ${@bb.utils.contains('BBFILE_COLLECTIONS', 'meta-arm-bsp', \
-                             '${ARM_AUTONOMY_MACHINE_EXTRA_REQUIRE}' , \
-                             '', d)}

meta-arm-autonomy/conf/layer.conf

@@ -1,39 +0,0 @@
-# Add layer to BBPATH
-BBPATH .= ":${LAYERDIR}"
-
-# Add recipes-* directories to BBFILES
-BBFILES += " \
-    ${LAYERDIR}/recipes-*/*/*.bb \
-    ${LAYERDIR}/recipes-*/*/*.bbappend \
-    "
-
-BBFILE_COLLECTIONS += "meta-arm-autonomy"
-BBFILE_PATTERN_meta-arm-autonomy = "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-arm-autonomy = "5"
-LAYERDEPENDS_meta-arm-autonomy = " \
-   core \
-   yocto \
-   openembedded-layer \
-   networking-layer \
-   virtualization-layer \
-"
-LAYERSERIES_COMPAT_meta-arm-autonomy = "hardknott"
-
-# We don't activate virtualization feature from meta-virtualization as it
-# brings in lots of stuff we don't need. We need to disable the sanity check
-# otherwise the user will see a warning on each build.
-SKIP_META_VIRT_SANITY_CHECK = "1"
-
-ARM_AUTONOMY_LAYERDIR := "${LAYERDIR}"
-# Directory of our distro config files
-ARM_AUTONOMY_DISTRO_CFGDIR = "${ARM_AUTONOMY_LAYERDIR}/conf/distro/include/"
-
-# Add class to handle arm-autonomy distro extensions
-USER_CLASSES_append = " arm-autonomy-features"
-
-BBFILES_DYNAMIC += " \
-    meta-arm-bsp:${LAYERDIR}/dynamic-layers/meta-arm-bsp/*/*/*.bbappend \
-    meta-arm-bsp:${LAYERDIR}/dynamic-layers/meta-arm-bsp/*/*/*.bb \
-"
-# Root directory for the meta-arm-autonomy/dynamic-layers/meta-arm-bsp
-ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR = "${ARM_AUTONOMY_LAYERDIR}/dynamic-layers/meta-arm-bsp"

meta-arm-autonomy/conf/machine/arm64-autonomy-guest.conf

@@ -1,17 +0,0 @@
-#@TYPE: Machine
-#@NAME: Autonomy Guest ARM64 machine
-#@DESCRIPTION: Machine configuration for ARM64 Autonomy Guest
-
-TUNE_FEATURES = "aarch64"
-
-require conf/machine/include/arm/arch-armv8a.inc
-
-KERNEL_IMAGETYPE = "Image"
-
-IMAGE_FSTYPES += "tar.bz2"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "5.10%"
-
-DISTRO_FEATURES += "arm-autonomy-guest"
-

meta-arm-autonomy/conf/xenguest.conf

@@ -1,5 +0,0 @@
-# This file will be required by different xenguest recipes to provide
-# common variables, which can be configured in local.conf
-
-# Xenguest image file install location
-XENGUEST_MANAGER_GUEST_DIR ?= "${datadir}/guests/"

meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md

@@ -1,226 +0,0 @@
-arm-autonomy Multiconfig Build Environment Instructions
-==================
-
-This documentation explains how to simplify the process of building hosts
-and guests in a single bitbake command, rather than in seperate build
-folders. You can read more about multiconfig in the bitbake documentation:
-
- - [bitbake user manual](https://www.yoctoproject.org/docs/latest/bitbake-user-manual/bitbake-user-manual.html)
-
-To achieve a multiconfig build, a number of different config files need to
-be created in a single build directory.
-
-Create a new project
-----------------
-
-Before you start, you will need to follow the instructions in
-"Create a project" from the quickstart guide, to create a new project
-directory with
-  ```
-  oe-init-build-env my-mc-project
-  ```
-Ensure it has all the required layers in bblayers.conf as listed in
-`arm-autonomy-quickstart.md`. The result should be a directory containing:
-
-```
--- conf
- | -- bblayers.conf
- | -- local.conf
- | -- templateconf.cfg
-```
-
-Add multiconfig
-----------------
-
-The steps required to make the project build both the host and any
-number of guests as required are:
-
-1. Create a new directory under `conf/` named `multiconfig/`
-
-2. Create two new files in this directory:
-`multiconfig/host.conf`
-`multiconfig/guest.conf`
-These files will contain any configurations that are specific to either the
-host or the guest. The resulting directory tree should be:
-
-```
--- conf
- | -- bblayers.conf
- | -- local.conf
- | -- templateconf.cfg
- | -- multiconfig
-    | -- host.conf
-    | -- guest.conf
-```
-
-3. In `local.conf` the following config variables must be added:
-
-```
-MACHINE ?= "fvp-base"
-
-# ---Guest Config Start--- #
-MC_GUEST = "guest"
-
-MC_GUEST_NAME = "guest1"
-
-MC_GUEST_IMAGERECIPE = "core-image-minimal"
-MC_GUEST_MACHINE = "arm64-autonomy-guest"
-
-MC_GUEST_INITRAMFS_IMAGE_BUNDLE ?= ""
-MC_GUEST_INITRAMFS_IMAGE ?= ""
-
-# Uncomment for initramfs
-#MC_GUEST_INITRAMFS_IMAGE_BUNDLE = "1"
-#MC_GUEST_INITRAMFS_IMAGE = "${MC_GUEST_IMAGERECIPE}"
-
-# These variables are set automatically, don't override them!
-MC_GUEST_FILENAME_PREFIX = "${@ 'Image-initramfs' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_IMAGERECIPE}' }"
-
-MC_GUEST_FILENAME = "${MC_GUEST_FILENAME_PREFIX}-${MC_GUEST_MACHINE}.xenguest"
-
-MC_GUEST_DEP = "${@ 'virtual/kernel:do_deploy' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_IMAGERECIPE}:do_merge_xenguestenv'}"
-
-MC_DOIMAGE_MCDEPENDS += "mc:${MC_HOST}:${MC_GUEST}:${MC_GUEST_DEP} "
-
-BBMULTICONFIG += "${MC_GUEST} "
-
-ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS += "file://${TOPDIR}/${MC_GUEST}/deploy/images/${MC_GUEST_MACHINE}/${MC_GUEST_FILENAME};guestname=${MC_GUEST_NAME} "
-# ---Guest Config End--- #
-
-# ---Host Config Start--- #
-MC_HOST = "host"
-
-BBMULTICONFIG += "${MC_HOST} "
-# ---Host Config End--- #
-```
-
-These variables will be used in both of the multiconf files. `MC_HOST` and
-`MC_GUEST` should not be altered without renaming the conf files, but most
-`MC_GUEST_*` variables can be customised if you desire.
-
-4. Next set the contents of `multiconfig/guest.conf`:
-
-```
-TMPDIR = "${TOPDIR}/${MC_GUEST}"
-
-MACHINE = "${MC_GUEST_MACHINE}"
-DISTRO_FEATURES += " arm-autonomy-guest"
-
-INITRAMFS_IMAGE_BUNDLE = "${MC_GUEST_INITRAMFS_IMAGE_BUNDLE}"
-INITRAMFS_IMAGE = "${MC_GUEST_INITRAMFS_IMAGE}"
-
-IMAGE_FSTYPES += "${@ 'cpio' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else ''}"
-
-# ANY OTHER GUEST CONFIG
-```
-
-To modify the MACHINE or INITRAMFS variables change the equivalent
-config in local.conf rather than modifying this file directly. You can also
-append any other config desired for the guest after "ANY OTHER GUEST CONFIG",
-for example `XENGUEST_IMAGE_DISK_SIZE`.
-
-Make sure not to change `${DEPLOY_DIR_IMAGE}` to anything other than
-`${TMPDIR}/deploy/images`, as this is assumed by local.conf.
-
-5. Lastly set the contents of `multiconfig/host.conf`:
-
-```
-TMPDIR = "${TOPDIR}/${MC_HOST}"
-
-DISTRO_FEATURES += " arm-autonomy-host"
-
-# ANY OTHER HOST CONFIG
-```
-
-Building the image
-----------------
-
-To build the multiconfig image the command is:
-```
-bitbake mc:host:arm-autonomy-host-image-minimal
-```
-
-The first time this is run you may see a warning related to the SRC_URI:
-```
-Unable to get checksum for xenguest-extern-guests SRC_URI entry foo.xenguest: file could not be found
-```
-
-This is expected, and only indicates that the guest image has not yet been
-generated when the host parses the SRC_URI. By the time it is needed by the
-host recipe fetch task it will be present.
-
-During the build you should see that guest tasks are also being executed in
-parallel. Once the build completes the guest will already be in the rootfs of
-the host thanks to `ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUEST`
-
-The final host image including the guests will be deployed in
-`host/deploy/images/`
-
-
-Multiple Guests
-----------------
-
-To have multiple guests with the same config the line which appends to
-`ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS` just needs to pass the argument
-'guestcount=#' to install symlink copies of the xenguest file on the host.
-Documentation for the guestcount parameter can be found in
-documentation/arm-autonomy-quickstart.md in the section titled
-'Include guests directly in the host image'. This will ensure that the guest
-is still only built once, despite resulting in multiple copies on the target.
-
-If guests are required to have different configurations, each will need its own
-config file, e.g. 'netguest.conf'. Ensure that the name of the conf file does
-not contain any hyphens, as this will create errors when it becomes part of a
-function name. In this file the values of TMPDIR, MACHINE, DISTRO_FEATURES etc.
-should be the same as above, but with the prefix "MC_GUEST_*" modified to
-something different to avoid collisions (e.g. MC_GUEST_2_*).
-
-As before, your additional config for the guest type should
-follow "ANY OTHER GUEST CONFIG"
-
-In your local.conf, everything between `---Guest Config Start---` and
-`---Guest Config End---` will need to be duplicated for each desired guest type.
-All copies of variables that start `MC_GUEST` must be modified with the same
-prefix as in the new guest config file (e.g. `MC_GUEST_2_*`).
-
-Each chunk of guest config in local.conf has automatic guest variables
-(found after the line "These variables are set automatically...").
-These should all use the same prefix as their chunk in their values,
-for example:
-```
-MC_GUEST_2_FILENAME_PREFIX = "${@ 'Image-initramfs' if d.getVar('MC_GUEST_2_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_2_IMAGERECIPE}' }"
-```
-
-Guest with provisioned disk
-----------------
-
-To add guest rootfs partition to host wic image,
-set `AUTONOMY_HOST_EXTRA_PARTITION` with proper wks partition entry, e.g:
-
-```
-AUTONOMY_HOST_EXTRA_PARTITION = "part --label provisioned-guest --source rawcopy --fstype=ext4 --ondisk sda --align 1024 \
---sourceparams=file=${TOPDIR}/${MC_GUEST}/deploy/images/${MC_GUEST_MACHINE}/${MC_GUEST_FILENAME_PREFIX}-${MC_GUEST_MACHINE}.ext4"
-```
-
-inside your host.conf file.
-
-The rest of the configuration has to be appended to guest.conf file:
-
-```
-# ANY OTHER GUEST CONFIG
-XENGUEST_IMAGE_DISK_SIZE = "0"
-XENGUEST_IMAGE_SRC_URI_XEN_CONFIG = "file://\${TOPDIR}/path/to/rootdisk.cfg"
-XENGUEST_IMAGE_DISK_DEVICE = "_GUEST_DISK_DEVICE_"
-XENGUEST_IMAGE_ROOT = "/dev/xvda"
-IMAGE_ROOTFS_SIZE = "102400"
-IMAGE_FSTYPES = "ext4"
-```
-
-Example content of rootdisk.cfg:
-
-```
-disk = ["phy:_GUEST_DISK_DEVICE_,xvda,w"]
-```
-
-`_GUEST_DISK_DEVICE_` should be substituted with `/dev/sdaX`,
-according to wks file.

meta-arm-autonomy/documentation/arm-autonomy-quickstart.md

@@ -1,272 +0,0 @@
-arm-autonomy Quick Start
-==================
-
-This documentation explains how to quickly start with the arm-autonomy layer,
-and the main features provided.
-In the documentation directory you will find some more detailed documentation
-for each of the functionalites provided by this layer.
-
-What to use this layer for?
----------------------------
-Using this layer, you can easily and rapidly create a system based on Xen with
-one or more guests created using Yocto.
-
-For this you will need to create at least 2 Yocto projects:
-- a host project: This one will compile Xen and create a Linux system to be
-  used as Xen Dom0. The Linux system will contain all functionalities required
-  to start and manage guests.
-- one or several guest projects: Those will create Linux systems with the
-  required Linux kernel configuration to run as Xen DomU.
-
-Prepare your system
--------------------
-
-First you must download the Yocto layers needed:
- - [meta-openembedded](https://git.openembedded.org/meta-openembedded)
- - [poky](https://git.yoctoproject.org/poky)
- - [meta-virtualization](https://git.yoctoproject.org/meta-virtualization)
- - [meta-arm](https://git.yoctoproject.org/meta-arm)
- - all other layers you might want to use
-
-For each of the downloaded layer make sure you checkout the release of Yocto
-you want to use (for example hardknott using `git checkout hardknott`).
-
-Please follow [Yocto documentation](https://www.yoctoproject.org/docs/latest/brief-yoctoprojectqs/brief-yoctoprojectqs.html)
-in order to have the required dependencies.
-
-
-Create a project
-----------------
-
-Here are the main steps to create an arm-autonomy project:
-
-1. create a new Yocto project using `oe-init-build-env` in a new directory:
-  ```
-  oe-init-build-env my-project
-  ```
-
-2. Add `meta-arm/meta-arm-autonomy` layer to the list of layers of your
-  project in the `conf/bblayers.conf`. Also add any other layers you
-  might need (for example `meta-arm/meta-arm-bsp` and `meta-arm/meta-arm` to
-  use Arm boards like Juno or FVP emulator). You can achieve this by using
-  the `bitbake-layers add-layer layerdir [layerdir ...]` command.
-  For example:
-  ```
-  export LAYERDIR_BASE="/home/user/arm-autonomy/"
-  bitbake-layers add-layer $LAYERDIR_BASE/meta-poky $LAYERDIR_BASE/meta-yocto-bsp \
-   $LAYERDIR_BASE/meta-openembedded/meta-oe $LAYERDIR_BASE/meta-openembedded/meta-python \
-   $LAYERDIR_BASE/meta-openembedded/meta-filesystems $LAYERDIR_BASE/meta-openembedded/meta-networking \
-   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
-   $LAYERDIR_BASE/meta-arm/meta-arm-bsp $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
-  ```
-
-  Example of a `conf/bblayers.conf`:
-  ```
-  BBLAYERS ?= " \
-    /home/user/arm-autonomy/poky/meta \
-    /home/user/arm-autonomy/poky/meta-poky \
-    /home/user/arm-autonomy/poky/meta-yocto-bsp \
-    /home/user/arm-autonomy/meta-openembedded/meta-oe \
-    /home/user/arm-autonomy/meta-openembedded/meta-python \
-    /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
-    /home/user/arm-autonomy/meta-openembedded/meta-networking \
-    /home/user/arm-autonomy/meta-virtualization \
-    /home/user/arm-autonomy/meta-arm/meta-arm \
-    /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
-    /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
-    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
-    "
-  ```
-
-  Be aware that changing the order may break some dependencies if editing the
-  config file manually.
-
-Those steps will have to be done for each project you will have to create.
-
-Host project
-------------
-The host project will build Xen and the Dom0 Linux. It will be the only project
-that will be specific to the board (MACHINE) you will be running on.
-
-To create a host project:
-1. Follow the steps of "Create a project"
-
-2. Add the layers in `bblayers.conf` required to build a Yocto project for the
-   board you want to use.
-   For example to use Arm FVP Base emulator, add `meta-arm/meta-arm` and
-   `meta-arm/meta-arm-bsp`.
-
-3. edit conf/local.conf to add `arm-autonomy-host` to the DISTRO_FEATURES and
-   set MACHINE to the board you want to use.
-   For example, add the following lines:
-  ```
-  MACHINE = "fvp-base"
-  DISTRO_FEATURES += "arm-autonomy-host"
-  ```
-
-4. build the image using `bitbake arm-autonomy-host-image-minimal`
-
-The project will generate a Linux kernel, a root filesystem, a Xen binary and
-a DTB modified to include the required entries to boot Xen and Linux as Dom0
-(this DTB has the extension `-xen.dtb`).
-
-To boot the system using a u-boot base board for machines other than FVP-Base
-you will need to:
-- Load the kernel (by default at 0x80080000 unless you modify
-  XEN_DEVICETREE_DOM0_ADDR value)
-- Load the xen device tree (for example at 0x83000000)
-- Load the xen-efi binary (for example at 0x84000000)
-- run using `booti 0x84000000 - 0x83000000`
-
-In this example the addresses might need to be adapted depending on your board.
-
-For arm-autonomy host on FVP-Base, u-boot has been modified such that
-`booti 0x84000000 - 0x83000000` is the default boot command. If FVP-Base is your
-MACHINE target there should be no need to interfere with u-boot.
-
-Guest project
--------------
-The guest projects are not target specific and will instead use a Yocto MACHINE
-defined in meta-arm-autonomy to include only the Linux configuration required to
-run a xen guest.
-
-To create a guest project:
-
-1. Follow the steps of "Create a project"
-
-2. Optionally add layers required to build the guest image, and any features you
-   need.
-
-3. Edit conf/local.conf to add `arm-autonomy-guest` to the DISTRO_FEATURES and
-   set MACHINE to `arm64-autonomy-guest`:
-  ```
-  MACHINE = "arm64-autonomy-guest"
-  DISTRO_FEATURES += "arm-autonomy-guest"
-  ```
-
-4. Build the image you want.
-   For example `bitbake core-image-minimal`
-
-The build will create a ".xenguest" image that can be use on an host project
-with the xenguest-manager, as well as a file "xenguest.env" containing the
-variables used to configure and generate the guest image.
-
-The guest can also be built as a 'multiconfig' sub project of the host, see
-`meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md` for more
- information
-
-Include guests directly in the host image
------------------------------------------
-The layer provides a way to directly include one or more images generated by
-guest projects in the host project.
-
-To use this feature, you must edit your host project `local.conf` file and
-add set the value of 'ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS' to the list of
-paths to xenguest images you want to include in your host.
-
-There are 4 supported formats for ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS
-entries:
-
-- http/https url
-  - "https://[url]:[port]/foo.xenguest;md5sum=..."
-
-- file:// absolute local path from root
-  - "file:///xenguests/bar.xenguest"
-
-- file:// path relative to FILESEXTRAPATHS
- - "file://relative/baz.xenguest"
-
-- plain absolute local path from root
-  - "/xenguests/absolute/xyzzy.xenguest"
-
-It is not recommended to use other bitbake URL types, as they may result in
-undefined behaviour.
-
-A semicolon seperated list of install arguments can follow each image path:
-- guestname  : the name that will be attached when the image is imported
-               (default: [filename, without extension])
-- guestcount : the number of copies of the guest to install, with
-               incrementing numbers appended to the name
-               (default: 1)
-
-Any other arguments, for example an md5sum, will be assumed to be fetch
-arguments, and will be appended to the path in the SRC_URI.
-For example:
-```
-ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS = "\
-https://[url]:[port]/base.xenguest;md5sum=[checksum];guestname=http \
-file:///guests/base.xenguest;guestname=file_abs \
-file://foo/base.xenguest;guestname=file_rel;guestcount=2 \
-/guests/foo/bar/base.xenguest;guestname=no_fetcher \ "
-```
-
-Documentation for setting up a multiconfig build can be found in:
-meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md
-
-Add support for your board
---------------------------
-Most of arm-autonomy layer is board independent but some functionalities
-might need to be customized for your board:
-
-### Add the kernel configuration for the host
-The layer is using KERNEL_FEATURES to add drivers required to be a Xen Dom0
-system.
-Depending on the kernel used by your BSP and how it is configured you might
-need to add the required drivers to your kernel configuration:
-- if KERNEL_FEATURES system is supported by your kernel, make sure that the
-file `recipes-kernel/linux/linux-arm-autonomy.inc` from the layer is included
-by your kernel recipe.
-- if it is not supported, you must add the proper drivers inside your kernel
-(modules are possible but they must be loaded before xenguest-manager is
-started). You can find the complete list of the kernel configuration elements
-required in `recipes-kernel/linux/arm-autonomy-kmeta/features/arm-autonomy/xen-host.cfg`.
-
-### Define the drive and partition to use for the LVM volume
-The xenguest-manager creates guest storage drives using LVM on an empty
-partition. The default value is set to use /dev/sda2.
-You can change this for your board by setting XENGUEST_MANAGER_VOLUME_DEVICE.
-
-Check `recipes-extended/xenguest/xenguest-manager.bbappend` for examples.
-
-Please also read xenguest-manager.md.
-
-### Define the interface to add to xenguest network bridge
-xenguest-network bridge creates a bridge on the host and adds network
-interfaces to it so that guests connected to it have access to external network.
-By default `eth0` is set as the list of interfaces to be added to the bridge.
-Depending on your board or use case you might want to use an other interface
-or use multiple interfaces.
-You can change this for your board by setting XENGUEST_NETWORK_BRIDGE_MEMBERS.
-
-Check `recipes-extended/xenguest/xenguest-network.bbappend` for
-exmaples.
-
-Please also read xenguest-network-bridge.md.
-
-### Define the network configuration of the xenguest network bridge
-xenguest-network puts the host network interfaces in a bridge and configures it
-by default to use dhcp.
-If you need a different type of configuration you can set
-XENGUEST_NETWORK_BRIDGE_CONFIG in your xenguest-network-bridge.bbappend to use
-a different file.
-The recipe will look for the file in ${WORKDIR}, so you will need to add it to
-the SRC_URI in your bbappend.
-The recipe will also substitute `###BRIDGE_NAME###` with the bridge name
-configured in ${XENGUEST_NETWORK_BRIDGE_NAME} when the config file is installed.
-
-You can find an example configuration file in
-`recipes-extended/xenguest/files/xenguest-network-bridge-dhcp.cfg.in`.
-
-Please also read xenguest-network.md.
-
-### Customize Dom0 and Xen boot arguments for you board
-xen-devicetree modifies the generated DTB Xen and Linux boot arguments,
-as long as the address where Dom0 Linux kernel can be found.
-You might need to have different values for your board or depending on your
-use case.
-
-You can find examples to customize this in
-`recipes-extended/xen-devicetree/xen-devicetree.bbappend`.
-
-Please also read xen-devicetree.md.
-

meta-arm-autonomy/documentation/n1sdp-image-customization.md

@@ -1,34 +0,0 @@
-Customizing Arm Autonomy Host image layout for N1SDP
-====================================================
-
-When buiding with `DISTRO_FEATURES += "arm-autonomy-host"` the user can
-perform a couple of customizations in the generated wic image:
-
-1. Set the guest partition size (default: 4iG) via `GUEST_PART_SIZE` and
-   `GUEST_PART_SIZE_UNIT` (M or G) variables to be set in any conf file. The
-   value of these variables should be aligned with the sum of all
-   XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-   1 MiB per physical volume, hence it needs to be taken into account when
-   setting GUEST_PART_SIZE.
-
-2. Set the boot partition size (default: 100M) via `BOOT_PART_SIZE` and
-   `BOOT_PART_SIZE_UNIT` (M or G) variables in any conf file. The default
-   bootimg is ~44M so 100M leaves just over 50M of free space.
-
-3. The wic image partition layout and contents with a custom wks file via
-   `ARM_AUTONOMY_WKS_FILE` variable (default:
-   arm-autonomy-n1sdp-efidisk.wks.in which is affected by GUEST_PART_SIZE,
-   GUEST_PART_SIZE_UNIT, BOOT_PART_SIZE, BOOT_PART_SIZE_UNIT and
-   GRUB_CFG_FILE variables).
-
-4. Custom grub.cfg file via `GRUB_CFG_FILE` (default:
-   arm-autonomy-n1sdp-grub.cfg) variable to be set in any conf file. The full
-   path or relative to `ARM_AUTONOMY_WKS_FILE` should be set.
-
-The `arm-autonomy-n1sdp-efidisk.wks.in` and `arm-autonomy-n1sdp-grub.cfg` files
-are located at `meta-arm-autonomy/dynamic-layers/meta-arm-bsp/wic`.
-
-Other variables can also be customized to set what files need to be included
-in the wic image boot partition. Please refer to
-`meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc`
-for more details.

meta-arm-autonomy/documentation/xen-devicetree.md

@@ -1,110 +0,0 @@
-Xen device tree
-===============
-
-Introduction
-------------
-
-xen-devicetree recipe can be used to modify an existing Device Tree Blob,
-produced by Linux kernel or another recipe, to include in it entries required
-to start Xen and a Dom0 Linux on top of it.
-
-The recipe will do the following processing:
-- generate a xen.dtsi file with entries required for xen based on parameters
-- turn DTBs in ${XEN_DEVICETREE_DTBS} back to dts
-- include in xen.dtsi and all other dtsi from
-  ${XEN_DEVICETREE_DTSI_MERGE} (check Bitbake parameters for more information
-  on this).
-- use dtc to create a new DTB file
-
-The recipe will generate new files in deploy/images and name them with the
-extension "-xen.dtb".
-For example **machine.dtb** will generate **machine-xen.dtb**.
-
-Entries added to the DTBs
--------------------------
-
-When a DTB is processed by the recipe, the following block is added:
-```
-    chosen {
-        xen,dom0-bootargs = "VAL";
-        xen,xen-bootargs = "VAL";
-
-        modules {
-            #size-cells = <0x00000001>;
-            #address-cells = <0x00000001>;
-
-            module@0 {
-                reg = <VAL VAL>;
-                compatible = "multiboot,module";
-            };
-        };
-    };
-```
-Each occurence of **VAL** is replaced by the content of the variables listed in
-this documentation.
-
-Bitbake parameters
-------------------
-
-Several parameters are available to configure the xen-devicetree during Yocto
-project compilation (those can be set in your project local.conf, for exmple).
-
-The following parameters are available:
-
-- XEN_DEVICETREE_DEPEND: This variable can be used to indicate which recipe
-  task is generating the DTBs that xen-devicetree will modify. This makes sure
-  the xen devicetrees are properly regenerated if the source DTBs are changed.
-  This variable is set by default to "virtual/kernel:do_deploy" to use DTBs
-  generated during the compilation of the Linux kernel. This must be changed
-  if the machine you are using is not using a DTB listed in
-  KERNEL_DEVICETREE.
-
-- XEN_DEVICETREE_DTBS: This should be set to the list of DTBs you want to be
-  modified by xen-devicetree. Those must be files that xen-devicetree can find
-  in the ${DEPLOY_DIR_IMAGE} directory using only the basename of the entries.
-  For example "mydir/board.dtb" will make the recipe look for
-  ${DEPLOY_DIR_IMAGE}/board.dtb.
-  This variable is set by default to "${KERNEL_DEVICETREE}" to process the DTBs
-  generated by the Linux kernel.
-
-- XEN_DEVICETREE_DOM0_MEM: Memory size to allocate to Dom0.
-  This variable is only used if XEN_DEVICETREE_XEN_BOOTARGS has a value
-  containing "dom0_mem=${XEN_DEVICETREE_DOM0_MEM}" as the memory assigned to
-  dom0 is defined using Xen boot arguments.
-  This variable is set by default to "1024M,max:1024", and cannot be empty.
-  The value can simply specify a size, e.g. "1024M", but best practice is to
-  also provide a max, documented here:
-  https://wiki.xenproject.org/wiki/Xen_Project_Best_Practices
-
-- XEN_DEVICETREE_DOM0_BOOTARGS: Boot arguments to pass to Dom0 Linux when
-  booting it.
-  This variable is set by default to "console=hvc0 earlycon=xen".
-
-- XEN_DEVICETREE_XEN_BOOTARGS: this variable should be set with the boot
-  arguments to be passed to Xen on boot.
-  This variable is set by default to
-  "noreboot dom0_mem=${XEN_DEVICETREE_DOM0_MEM}".
-
-- XEN_DEVICETREE_DOM0_ADDR: This is the address from which the Linux kernel to
-  be used for Dom0 will be copied. When using u-boot, this is the address at
-  which you will load the kernel Image before starting Xen.
-  This variable is set by default to "0x80080000", and cannot be empty.
-  Values for this variable can be in hex (prefixed with '0x') or in decimal.
-
-- XEN_DEVICETREE_DOM0_SIZE: This is the size of the kernel loaded at
-  ${XEN_DEVICETREE_DOM0_ADDR}. Xen will copy this amount of data inside the
-  guest before starting it so the size must be at least equal to the kernel
-  size but can be bigger. You must be careful not to have a value too big as it
-  could slow down boot or copy other parts with it (like the DTB).
-  You might need to increase this if you use a kernel with a bundled initramfs.
-  This variable is set by default to "0x01000000" and cannot be empty.
-  Values for this variable can be in hex (prefixed with '0x') or in decimal.
-
-- XEN_DEVICETREE_DTSI_MERGE: This variable contains the list of dtsi files that
-  must be included inside the generated DTB file. By default the only one
-  include is the "xen.dtsi" generated by the recipe.
-  If your board or project needs to include more fixes or entries in the DTB,
-  this variable can be appended from a bbappend file to include other dtsi. The
-  files must be inside the recipe workspace during Yocto compilation.
-  You can check xen-devicetree.bbappend for an example.
-

meta-arm-autonomy/documentation/xenguest-manager.md

@@ -1,144 +0,0 @@
-Xenguest Manager
-================
-
-Introduction
-------------
-
-xenguest-manager is a tool to manage Xenguest images generated by
-[xenguest-mkimage](xenguest-mkimage.md).
-
-On a Xen Dom0 system it can:
-- create a xen guest from a xenguest image: extract its components, create a
-  disk for the guest using LVM volumes.
-- start/stop a xen guest (during init or using xenguest-manager directly).
-- check guest status
-
-xenguest-manager is composed of 2 shell scripts:
-- xenguest-manager which can be used from command line to start/stop/check
-guests and create or remove guest using xenguest images.
-- xenguest-init which is called during init to automatically create and start
-some guests as part of the host init process.
-
-Usage
------
-
-xenguest-manager must be called like this:
-`xenguest-manager [-v(v)] OPERATION [OPTIONS]`
-The following operations are available:
-- create XENGUEST_IMAGE [GUESTNAME]: create a guest from a xenguest image file
-  as guest GUESTNAME. If GUESTNAME is not given the image file name is used
-  without the xenguest extension.
-- remove GUESTNAME: remove the guest GUESTNAME.
-- start GUESTNAME: start the guest GUESTNAME.
-- stop GUESTNAME: stop the guest GUESTNAME (this is using `xl stop` which is
-  sending a stop signal to the running guest).
-- kill GUESTNAME: force stopping the guest GUESTNAME.
-- list: list the available guests.
-- status [GUESTNAME]: print the current status of GUESTNAME. If GUESTNAME is
-  not given, print the status of all guests.
-
-Passing -v or -vv will increase the logging written to the logfile.
-The terminal will always show only error messages, regardless of the logfile.
-
-For a detailed help on available options please use:
-`xenguest-manager --help`
-
-Bitbake parameters
-------------------
-
-Several parameters are available to configure the xenguest manager during Yocto
-project compilation (those can be set in your project local.conf, for example).
-This config will be written to a file xenguest-manager.conf in /etc/xenguest/.
-
-The following parameters are available:
-
-- XENGUEST_MANAGER_VOLUME_DEVICE: This is the device path used by the
-  xenguest-manager on the device to create LVM disks when guests have a disk
-  configuration.
-  This is set by default to "/dev/sda2".
-
-- XENGUEST_MANAGER_VOLUME_NAME: This is the LVM volume name that the
-  xenguest-manager will create and use to create guest LVM disks.
-  This is set by default to "vg-xen".
-
-- XENGUEST_MANAGER_GUEST_DIR: This is the directory on Dom0 where the
-  xenguest-manager will look for xenguest images to create during init. That's
-  the place where xenguest images can be added to have them automatically
-  created during next Dom0 boot. The xenguests found there will only be created
-  if they were not already before (the basename of the files is used as guest
-  name).
-  This is set by default to "/usr/share/guests".
-
-- XENGUEST_MANAGER_LOG_LEVEL: Set the default log level for xenguest manager.
-  Must be one of ERROR, INFO, VERBOSE (default: ERROR). The logs will be
-  written to /var/log/xenguest.
-
-  If a verbosity argument (-v or -vv) is passed to xenguest-manager directly, it
-  will override the setting in xenguest-manager.conf
-
-  Since /var/log is by default a volatile location, extra configuration is
-  required if logs are desired to be kept between reboots:
-    VOLATILE_LOG_DIR="no"
-
-  Read more here: https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-VOLATILE_LOG_DIR
-
-  When this is enabled, logrotate will monitor the file to ensure it does not
-  grow excessively large. See recipes-extended/xenguest/files/logrotate-xenguest
-
-Init scripts
-------------
-
-Shell scripts can be executed on the host when a guest is started. Depending on
-when the script should be executed it should be installed in a different
-directory on the target:
-
-- /etc/xenguest/init.pre  : Executed first, prior to guest creation
-
-- /etc/xenguest/init.d    : Executed after guest creation, but before it is started
-
-- /etc/xenguest/init.post : Executed after starting the guest
-
-Inside the directory, scripts will be executed in alphabetical order.
-
-Since these scripts are sourced by xenguest-manager, they can acccess functions
-and variables from the parent file's scope, including:
-
-- ${guestname}    : The name of the guest being created
-
-- ${guestdir}     : The path to the guest directory
-
-- ${guestcfgfile} : The name of the config file for the starting guest
-
-- log()           : Used to write a log to the logfile, default level INFO.
-                    Takes an optional log level and a message body
-                    e.g. log ERROR "blah"
-
-                    Options for log level: ERROR, INFO, VERBOSE,
-                    and FATAL which will call exit 1 immediately after logging
-                    the message at level ERROR.
-
-- log_command()   : Used to call a shell command and log that it has been
-                    called, as well as capturing both stdout and stderr.
-
-                    By default the command output is dumped to the logfile as an
-                    error if the command returns a status > 0, or as a verbose
-                    message if the whole script is running in verbose mode.
-
-                    An optional log level can be passed to alter the level the
-                    log should be if the command returns a status >0, which may
-                    be useful if the command is expected to return a non-zero
-                    result.
-                    e.g. log_command INFO "ls -lh ~"
-
-                    Options for log level: ERROR, INFO, and VERBOSE
-
-Attempting to call any other functions from xenguest_manager in an init script
-may result in a fatal error, from which cleanup is not guarenteed.
-
-
-Init scripts also have access to config variables defined in params.cfg.
-
-An example of how to create the directory and install an init shell script can
-be found in:
-  recipes-extended/xenguest/xenguest-network.bb
-Where network-bridge.sh is installed from network-bridge.sh.in

meta-arm-autonomy/documentation/xenguest-mkimage.md

@@ -1,128 +0,0 @@
-Xenguest mkimage
-================
-
-Introduction
-------------
-
-xenguest-mkimage is a tool to create and modify images to be used as a Guest
-with Xen. It defines a format to store completely defined guests as a file or as
-a directory, and provides options to create and modify those images.
-
-A xenguest image contains all elements required to create a xen guest.
-This is the base elements like a Xen configuration and a Linux kernel binary
-but also some more advanced elements like init scripts or a disk definition.
-
-The format is made to be deployable easily by storing everything in a single
-file and provide tools to easily manipulate the images. It can also easily be
-extended to have features like encryption or signature of images, updates or
-complex configurations by providing the ability to have init scripts embedded
-inside the image that will be executed on the host when the guest is started.
-
-Xenguest images content
------------------------
-
-### params.cfg
-
-This file contains parameters that can be used by tools to configure some
-functionalities on the host. This can be used by init scripts to have
-configurable parameters as it is sourced before calling init scripts.
-
-### guest.cfg and guest.d
-
-guest.cfg is the main xen configuration and guest.d contains optional
-configuration parts. All those will be merged into one final xen configuration
-before starting the guest.
-
-### files
-This directory contains files that can be used by the xen configuration, for
-example the kernel image referenced in xen configuration.
-This is where the kernel binary, the dtb or a ramdisk will be stored.
-
-### init.pre, init.d and init.post
-These directories contain init scripts that will be executed on the host
-during the guest startup. Those must be shell scripts and each directory
-contains scripts called at a different time:
- - init.pre: scripts executed before the guest is created. This can be used
-     to prepare some features required to create the guest in xen or to
-     generate part of the xen configuration dynamically.
- - init.d: scripts executed when the guest has been created but before it is
-     started. This can be used to do some xenstore operations or configure the
-     guest behaviour, using xl for example.
- - init.post: scripts executed just after starting the guest. This can be
-     used to configure things created by xen for the guest like network
-     network interfaces.
-
-When a directory contains several scripts, those will be called in alphabetical
-order.
-
-### disk.cfg and disk-files
-disk.cfg contains the guest disk description (disk size and disk partitions).
-The file contains the following entries:
-- `DISK_SIZE=X`: size of the disk to create in MB or GB(default),
-   e.g. 1000M or 4[G]
-- `DISK_PARTX=SIZE:FS:CONTENT`: create a partition number X (1 to 4) with a
-  size of SIZE MB or GB(default), e.g 1000M or 2[G].
-  Format it with filesystem FS (can be ext2, ext3, ext4, vfat or swap)
-  and extract CONTENT as initial partition content (.tar[.gz|.xz|.bz2] file
-  or img[.gz|.bz2] file to be dumped in the partition).
-  FS and CONTENT can be empty.
-- `DISK_DEVICE=X`: disk or partition to be used by lvm. Setting this option
-  allows to bind guest disk with any partition or disk available on host,
-  e.g. /dev/sda3 or /dev/sdb.
-  This variable is not set by default, but if set, it overrides disk settings
-  inside xenguest-manager.conf - 'XENGUEST_VOLUME_DEVICE'.
-
-The disk-files contain files to be used for initializing the disk partitions
-content. Those should be used to create a LVM or a physical disk and initialize
-it (create partitions, format them and put the initial content).
-
-Usage
------
-
-xenguest-mkimage is a shell script which must be called like this:
-`xenguest-mkimage OPERATION XENGUEST [OPTIONS]`
-
-### Operations
-- create: create a xenguest image. If XENGUEST is an existing empty directory,
-  the image is created as a directory otherwise it will be created as a file.
-- check: verify that XENGUEST is a valid xenguest image.
-- update: modify a xenguest image (see --help for a list of operations).
-- pack: pack a xenguest image directory into a xenguest image file. The file to
-  be created must be given as 3rd argument.
-- extract: extract a xenguest image file into a directory. The destination
-  directory must be given as 3rd argument.
-- dump-xenconfig: dump xenguest image xen configuration.
-- dump-diskconfig: dump xenguest image disk configuration.
-- dump-paramsconfig: dump xenguest image parameters configuration.
-
-For a detailed help on available operations, please use:
-`xenguest-mkimage --help`
-
-### Options
-- --kernel=FILE: add kernel FILE as guest kernel. This is both adding the file
-  to the image and modifying the xen configuration to use it.
-- --xen-memory=SIZE: set the guest memory size in MB.
-- --xen-extra: add a kernel command line argument. This can be called several
-  times to add several command line options.
-- --xen-device-tree=FILE: add dtb FILE as device tree. This both adding the
-  file to the image and modifying the xen configuration to use it.
-- --xen-ramdisk=FILE: add ramdisk FILE as guest ramdisk. This both adding the
-  file to the image and modifying the xen configuration to use it.
-- --init-script=FILE: add guest init script. The script is embedded inside the
-  image file. Several script can be added and the basename of FILE is used to
-  distinguish them (calling the option twice with the same file will update the
-  script in the image with the second one).
- --disk-size=SIZE: set the guest disk size to SIZE in MB or GB(default),
-   e.g 1000M or 2[G]. Calling this with 0 disable the guest disk.
-- --disk-add-part=NUM:SIZE:FS:CONTENT: This is adding a partition to the
-  xenguest image disk. The partition is described with the arguments:
-  - NUM: partition number.
-  - SIZE: partition size in MB or GB(default), e.g 1000M or 2[G].
-  - FS: filesystem to format the partition with. This can be ext2, ext3, ext4,
-    vfat of swap. If empty the partition is not formated.
-  - CONTENT: tar of img file to use to initialize the partition. The file must
-    be added to the image using --disk-add-file=FILE:CONTENT.
-
-For a detailed help on available options, please use:
-`xenguest-mkimage OPERATION --help`
-

meta-arm-autonomy/documentation/xenguest-network.md

@@ -1,80 +0,0 @@
-Xenguest Network
-================
-
-Introduction
-------------
-
-The xenguest-network package is primarly creating a network bridge to share
-the host eth physical interfaces with the guests virtual interfaces (vif).
-This way the guests can have access to the external network.
-
-At the moment 3 types of network arrangements are provided:
-
-- Bridge: where the guest vif is added to the created bridge interface;
-
-- NAT: where a private subnet is created for the guest,
-  a kea dhcp4 server is started on the host to serve the guest
-  and the proper iptables rules are created
-  to allow the guest to access the external network;
-
-- None: the guest vif is not connected to the bridge.
-
-Usage
------
-
-On the host project the package xenguest-network must be included in your
-image, and on the guest project the XENGUEST_NETWORK_TYPE needs to be set to
-"bridge", "nat" or "none".
-
-Bitbake parameters
-------------------
-
-Several parameters are available to configure the xenguest network bridge
-during Yocto project compilation (those can be set in your project local.conf
-or xenguest-network.bbappend, for example).
-
-The following parameters are available:
-
-- XENGUEST_NETWORK_BRIDGE_NAME: This variable defines the name of the network
-  bridge that is created on the host during init.
-  This is set by default to "xenbr0".
-
-- XENGUEST_NETWORK_BRIDGE_MEMBERS: This variable defines the list of the
-  physical network interfaces that are added to the bridge when it is created
-  on the host during init.
-  By default no physical interfaces are added.
-
-- XENGUEST_NETWORK_BRIDGE_CONFIG: This variable defines the configuration file
-  to use to configure the bridge network. By default it points to have file
-  configuring the network using dhcp.
-  You can provide a different file using a bbappend and make this variable
-  point to it if you want to customize your network configuration.
-
-- XENGUEST_IMAGE_NETWORK_TYPE: This variable can be set to "bridge" (default),
-  "nat" or "none".
-  The **bridge** type will add the domU vif interface to a bridge which also
-  contains the dom0 physical interface giving the guest direct access to the
-  external network.
-  The **nat** type will setup a private network between dom0 and domU, setup
-  the appropriate routing table, configure and run the kea dhcp4 server
-  on dom0 to serve the domU and apply the iptables rules to allow the guest
-  to acess the external network. The kea dhcp4 server configuration for
-  the guest can be customised by replacing the
-  "meta-arm-autonomy/recipes-extended/xenguest/files/kea-subnet4.json" file
-  in a xenguest-network.bbappend. The kea-subnet4.json file is installed in
-  the xenguest image and copied to
-  "/etc/xenguest/guests/${guestname}/files/kea-subnet4.json" when the guest
-  image is created. It will be consumed by the
-  "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" script which is called by
-  "/etc/xen/scripts/vif-nat" script when starting/stopping the xenguest.
-  After guest start, "/etc/xenguest/init.post/xenguest-network-init-post.sh"
-  script is called to reload kea dhcp4 server with updated configuration,
-  after virtual network interface is ready.
-  In the guest project, the NAT port forward can be customised by changing
-  the XENGUEST_IMAGE_HOST_PORT (default: "1000 + ${domid}") and
-  XENGUEST_IMAGE_GUEST_PORT (default: "22") variables in local.conf or
-  xenguest-base-image.bbappend. This configuration is implemented and installed
-  in "/etc/xenguest/guests/${guestname}/files/00-xenguest-nat-port-forward.hook"
-  script which is called by "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook".
-  The **none** type will not affect any networking setting between on dom0 and
-  domU.

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/arm-autonomy-machine-extra-settings.inc

@@ -1,7 +0,0 @@
-# Require extra machine specific settings
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE ?= ""
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_n1sdp = "n1sdp-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_fvp-base = "fvp-base-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_juno = "juno-extra-settings.inc"
-
-require ${ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE}

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/fvp-base-extra-settings.inc

@@ -1,7 +0,0 @@
-# Extra machine settings for fvp-base
-
-# FVP uses vda as hard drive and partition 2 is the
-# default rootfs, so use vda3 for guest lvm
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/vda3"
-
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/juno-extra-settings.inc

@@ -1,26 +0,0 @@
-# Extra machine settings for juno
-KERNEL_ALT_IMAGETYPE = "Image.lzma"
-
-# Juno board has 2 network interfaces, add both of them to the bridge
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0 eth1"
-XEN_DEVICETREE_DOM0_SIZE ?= "0x02400000"
-
-# We need to extend the wks search path to be able to find the wks file set in
-# ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
-
-ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-juno-disk.wks.in"
-# set wks file only if INITRAMFS_IMAGE_BUNDLE is not set
-WKS_FILE = "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
-                                 '${ARM_AUTONOMY_WKS_FILE}', d)}"
-
-# Set the wks guest partition size and unit. It must be aligned with the sum of
-# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-# 1 MiB per physical volume, hence it needs to be taken into account when
-# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
-GUEST_PART_SIZE ?= "4097"
-GUEST_PART_SIZE_UNIT ?= "M"
-
-# set wic image type only if INITRAMFS_IMAGE_BUNDLE is not set
-IMAGE_FSTYPES += "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
-                                       'wic wic.gz wic.bmap', d)}"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc

@@ -1,86 +0,0 @@
-# Extra machine settings for n1sdp
-
-# We need to extent the wks search path to be able to find the wks file set in
-# ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
-
-ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-n1sdp-efidisk.wks.in"
-WKS_FILE = "${ARM_AUTONOMY_WKS_FILE}"
-
-# Set the wks guest partition size and unit. It must be aligned with the sum of
-# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-# 1 MiB per physical volume, hence it needs to be taken into account when
-# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
-GUEST_PART_SIZE ?= "4097"
-GUEST_PART_SIZE_UNIT ?= "M"
-
-# Set default boot partition size and unit
-BOOT_PART_SIZE ?= "100"
-BOOT_PART_SIZE_UNIT ?= "M"
-
-# The GRUB_CFG_FILE affects arm-autonomy-n1sdp-efidisk.wks.in file
-#
-# When alternate-kernel DISTRO_FEATURE is present we set the
-# arm-autonomy-n1sdp-rt-grub.cfg by default. This GRUB config file has
-# additional entries for booting with the PREEMPT_RT kernel.
-GRUB_CFG_FILE ?= "${@bb.utils.contains('DISTRO_FEATURES','alternate-kernel', \
-                     '${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-rt-grub.cfg', \
-                     '${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-grub.cfg' \
-                     , d)}"
-
-# From arm-autonomy-n1sdp-efidisk.wks.in, the /boot partition is /dev/sda1, and
-# the "/" partition is /dev/sda2.
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/sda3"
-
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0"
-
-# The XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables aftect the
-# xen-devicetree.bb recipe
-XEN_DEVICETREE_DEPEND = "virtual/trusted-firmware-a:do_deploy"
-XEN_DEVICETREE_DTBS ?= "n1sdp-single-chip.dtb"
-# XEN_MOD_DEVICETREE_DTBS are the generated devicetrees for Xen. By default the
-# xen-devicetree.bb recipe adds '-xen' suffix to it
-XEN_MOD_DEVICETREE_DTBS ?= "n1sdp-single-chip-xen.dtb"
-
-# When generating the wic image we need to have the xen deployed
-do_image_wic[depends] += "xen:do_deploy"
-
-# Select the extra files to be included in the boot partition
-IMAGE_EFI_BOOT_FILES += "xen-n1sdp.efi;xen.efi"
-IMAGE_EFI_BOOT_FILES += "${XEN_MOD_DEVICETREE_DTBS}"
-
-# When alternate-kernel DISTRO_FEATURE is present we set the linux-yocto-rt
-# by default
-PREFERRED_PROVIDER_alternate/kernel ?= "\
-${@bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', \
-'linux-yocto-rt', '', d)}"
-
-KERNEL_PACKAGE_NAME_alternate/kernel ?= "kernel-rt"
-# When alternate-kernel DISTRO_FEATURE is present we set the kernel-rt by
-# default
-KERNEL_PACKAGE_NAME_pn-linux-yocto-rt = "\
-${@ d.getVar('KERNEL_PACKAGE_NAME_alternate/kernel') \
-if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) \
-else 'kernel' }"
-
-# Relative path from DEPLOY_DIR_IMAGE of the Kernel PREEMPT_RT deployed Image
-KERNEL_RT_IMAGE ?= "kernel-rt/Image-n1sdp.bin;Image-preempt-rt"
-# Only include the Kernel PREEMPT_RT Image if we are building with
-# alternate-kernel DISTRO_FEATURE
-IMAGE_EFI_BOOT_FILES += "\
-${@ d.getVar('KERNEL_RT_IMAGE',d) or '' \
-if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) and \
-d.getVar('PREFERRED_PROVIDER_alternate/kernel') else ''}"
-
-
-EFIDIR ?= "/EFI/BOOT"
-GRUB_CFG_EXTRA_FILE ?= "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-grub.cfg;.${EFIDIR}}"
-
-# When alternate-kernel DISTRO_FEATURE is present we set the
-# arm-autonomy-n1sdp-rt-grub.cfg by default. This GRUB config file has
-# additional entries for booting with the PREEMPT_RT kernel and also includes
-# the main GRUB config file set by GRUB_CFG_EXTRA_FILE.
-IMAGE_EFI_BOOT_FILES += "\
-${@ d.getVar('GRUB_CFG_EXTRA_FILE',d) or '' \
-if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) and \
-d.getVar('PREFERRED_PROVIDER_alternate/kernel') else ''}"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno.bbappend

@@ -1,50 +0,0 @@
-# Use OVERRIDES to minimize the usage of
-# ${@bb.utils.contains('DISTRO_FEATURES', 'autonomy-host', ...
-OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ':autonomy-host', '', d)}"
-
-FILESEXTRAPATHS_prepend_autonomy-host := "${THISDIR}/${PN}:"
-
-DEPENDS_append_autonomy-host = " dos2unix-native"
-
-SRC_URI_append_autonomy-host = " file://add-xen-support.patch;patchdir=../"
-
-do_install_append_autonomy-host() {
-    mv -v ${D}/${UNPACK_DIR}/SOFTWARE/uEnv.txt \
-          ${D}/${UNPACK_DIR}/SOFTWARE/uenvfile
-    for dir in $(ls ${D}/${UNPACK_DIR}/SITE1/)
-    do
-        unix2dos ${D}/${UNPACK_DIR}/SITE1/${dir}/images.txt
-    done
-}
-
-DEPLOY_EXTRA_DEPS ??= ""
-DEPLOY_EXTRA_DEPS_autonomy-host = "xen:do_deploy xen-devicetree:do_deploy"
-
-do_deploy[depends] += "${DEPLOY_EXTRA_DEPS}"
-
-do_deploy_prepend_autonomy-host() {
-    # To avoid dependency loop between firmware-image-juno:do_install,
-    # xen:do_deploy and xen-devicetree:do_deploy when
-    # INITRAMFS_IMAGE_BUNDLE = "1", we need to handle the xen and
-    # xen-devicetree binaries copying in the do_deploy task.
-
-    mkdir -p ${D}/${UNPACK_DIR}/SOFTWARE/XEN
-    cp  -v ${DEPLOY_DIR_IMAGE}/xen-${COMPATIBLE_MACHINE}.efi \
-        ${D}/${UNPACK_DIR}/SOFTWARE/XEN/xen
-
-    for dtb in $(basename -s .dtb ${KERNEL_DEVICETREE})
-    do
-        cp -v ${DEPLOY_DIR_IMAGE}/${dtb}-xen.dtb \
-            ${D}/${UNPACK_DIR}/SOFTWARE/XEN/${dtb}.dtb
-    done
-
-    bbnote "Xen binaries added under SOFTWARE/XEN directory"
-
-    if [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" -a "${KERNEL_ALT_IMAGETYPE}" = "Image.lzma" ]; then
-        # KERNEL_ALT_IMAGETYPE is expected to be Image.lzma,
-        # however NOR flash filesystem is DOS compatible with 8.3 naming,
-        # so we need to replace ".lzma" with ".lzm"
-        cp -L -f ${DEPLOY_DIR_IMAGE}/${KERNEL_ALT_IMAGETYPE} \
-                 ${D}/${UNPACK_DIR}/SOFTWARE/Image.lzm
-    fi
-}

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno/add-xen-support.patch

@@ -1,173 +0,0 @@
-arm-bsp/firmware-image-juno: add xen support
-
-This patch adds xen and dtbs binaries entries to images-r[012].txt files.
-These images-r[012].txt files contain NOR filesystem entries details,
-like file offset, name, path etc.
-
-It also adds customization for uEnv.txt file, that allows to autoboot xen.
-
-Upstream-Status: Inappropriate [configuration]
-Signed-off-by: Kamil Dziezyk <kamil.dziezyk@arm.com>
-
-diff -u a/images-r0.txt b/images-r0.txt
---- a/images-r0.txt	2020-11-25 20:25:38.677687712 +0100
-+++ b/images-r0.txt	2020-11-25 20:36:55.482194294 +0100
-@@ -1,7 +1,7 @@
- TITLE: Versatile Express Images Configuration File
- 
- [IMAGES]
--TOTALIMAGES: 10                  ;Number of Images (Max: 32)
-+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
- 
- NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR0ADDRESS: 0x00000000          ;Image Flash Address
-@@ -17,14 +17,14 @@
- 
- NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR2ADDRESS: 0x00500000          ;Image Flash Address
--NOR2FILE: \SOFTWARE\Image        ;Image File Name
--NOR2NAME: norkern                ;Rename kernel to norkern
-+NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
-+NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
- NOR2LOAD: 00000000               ;Image Load Address
- NOR2ENTRY: 00000000              ;Image Entry Point
- 
- NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR3ADDRESS: 0x02900000          ;Image Flash Address
--NOR3FILE: \SOFTWARE\juno.dtb     ;Image File Name
-+NOR3FILE: \SOFTWARE\XEN\juno.dtb ;Image File Name
- NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
- NOR3LOAD: 00000000               ;Image Load Address
- NOR3ENTRY: 00000000              ;Image Entry Point
-@@ -64,8 +64,13 @@
- NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR9ADDRESS: 0x02A80000          ;Image Flash Address
- NOR9NAME: uEnv.txt
--NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-+NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
- NOR9LOAD: 00000000               ;Image Load Address
- NOR9ENTRY: 00000000              ;Image Entry Point
- 
--
-+NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
-+NOR10ADDRESS: 0x03000000         ;Image Flash Address
-+NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
-+NOR10NAME: xen
-+NOR10LOAD: 00000000              ;Image Load Address
-+NOR10ENTRY: 00000000             ;Image Entry Point
-diff -u a/images-r1.txt b/images-r1.txt
---- a/images-r1.txt	2020-11-25 20:40:19.005177152 +0100
-+++ b/images-r1.txt	2020-11-25 20:41:17.500886263 +0100
-@@ -1,7 +1,7 @@
- TITLE: Versatile Express Images Configuration File
- 
- [IMAGES]
--TOTALIMAGES: 10                  ;Number of Images (Max: 32)
-+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
- 
- NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR0ADDRESS: 0x00000000          ;Image Flash Address
-@@ -17,14 +17,14 @@
- 
- NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR2ADDRESS: 0x00500000          ;Image Flash Address
--NOR2FILE: \SOFTWARE\Image        ;Image File Name
--NOR2NAME: norkern                ;Rename kernel to norkern
-+NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
-+NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
- NOR2LOAD: 00000000               ;Image Load Address
- NOR2ENTRY: 00000000              ;Image Entry Point
- 
- NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR3ADDRESS: 0x02900000          ;Image Flash Address
--NOR3FILE: \SOFTWARE\juno-r1.dtb  ;Image File Name
-+NOR3FILE: \SOFTWARE\XEN\juno-r1.dtb ;Image File Name
- NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
- NOR3LOAD: 00000000               ;Image Load Address
- NOR3ENTRY: 00000000              ;Image Entry Point
-@@ -64,8 +64,13 @@
- NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR9ADDRESS: 0x02A80000          ;Image Flash Address
- NOR9NAME: uEnv.txt
--NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-+NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
- NOR9LOAD: 00000000               ;Image Load Address
- NOR9ENTRY: 00000000              ;Image Entry Point
- 
--
-+NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
-+NOR10ADDRESS: 0x03000000         ;Image Flash Address
-+NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
-+NOR10NAME: xen
-+NOR10LOAD: 00000000              ;Image Load Address
-+NOR10ENTRY: 00000000             ;Image Entry Point
-diff -u a/images-r2.txt b/images-r2.txt
---- a/images-r2.txt	2020-11-25 20:40:30.625119321 +0100
-+++ b/images-r2.txt	2020-11-25 20:41:30.720820597 +0100
-@@ -1,7 +1,7 @@
- TITLE: Versatile Express Images Configuration File
- 
- [IMAGES]
--TOTALIMAGES: 10                  ;Number of Images (Max: 32)
-+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
- 
- NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR0ADDRESS: 0x00000000          ;Image Flash Address
-@@ -17,14 +17,14 @@
- 
- NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR2ADDRESS: 0x00500000          ;Image Flash Address
--NOR2FILE: \SOFTWARE\Image        ;Image File Name
--NOR2NAME: norkern                ;Rename kernel to norkern
-+NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
-+NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
- NOR2LOAD: 00000000               ;Image Load Address
- NOR2ENTRY: 00000000              ;Image Entry Point
- 
- NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR3ADDRESS: 0x02900000          ;Image Flash Address
--NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
-+NOR3FILE: \SOFTWARE\XEN\juno-r2.dtb ;Image File Name
- NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
- NOR3LOAD: 00000000               ;Image Load Address
- NOR3ENTRY: 00000000              ;Image Entry Point
-@@ -64,8 +64,13 @@
- NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR9ADDRESS: 0x02A80000          ;Image Flash Address
- NOR9NAME: uEnv.txt
--NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-+NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
- NOR9LOAD: 00000000               ;Image Load Address
- NOR9ENTRY: 00000000              ;Image Entry Point
- 
--
-+NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
-+NOR10ADDRESS: 0x03000000         ;Image Flash Address
-+NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
-+NOR10NAME: xen
-+NOR10LOAD: 00000000              ;Image Load Address
-+NOR10ENTRY: 00000000             ;Image Entry Point
-diff -u a/uEnv.txt b/uEnv.txt
---- a/uEnv.txt	2020-11-20 13:48:31.845078690 +0100
-+++ b/uEnv.txt	2020-11-25 20:30:00.572306675 +0100
-@@ -1,11 +1,16 @@
-+xen_name=xen
-+xen_addr=0x84000000
- uenvcmd=run mybootcmd
-+kernel_alt_name=norkern.lzm
-+kernel_comp_addr_r=0x88080000
- mybootcmd=echo Loading custom boot command; \
- echo Loading kernel; \
- afs load ${kernel_name} ${kernel_addr_r} ; \
--if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_addr_r}; fi; \
-+if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_comp_addr_r}; lzmadec ${kernel_comp_addr_r} ${kernel_addr_r}; fi; \
- echo Loading device tree; \
- afs load  ${fdtfile} ${fdt_addr_r}; \
- if test $? -eq 1; then echo Loading ${fdt_alt_name} instead of ${fdtfile}; \
- afs load ${fdt_alt_name} ${fdt_addr_r}; fi; fdt addr ${fdt_addr_r}; fdt resize; \
--booti ${kernel_addr_r} - ${fdt_addr_r};
--
-+echo Loading Xen; \
-+afs load  ${xen_name} ${xen_addr}; \
-+if test $? -eq 0; then echo Booting Xen; bootefi ${xen_addr} ${fdt_addr_r}; fi;
-

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen-devicetree/files/xen-juno.dtsi

@@ -1,11 +0,0 @@
-/*
- * Disable IOMMU on juno board when Xen is used
- */
-
-/ {
-
-	/* turn off iommu */
-	iommu@2b600000 {
-		status = "disabled";
-	};
-};

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen-devicetree/files/xen-n1sdp.dtsi

@@ -1,41 +0,0 @@
-/*
- * Modify N1SDP DTB to work properly when Xen is used
- */
-
-/ {
-
-    /*
-     * pmu is using PPI interrupts which are reserved by xen
-     * remove pm nodes
-     */
-    /delete-node/ pmu;
-    /delete-node/ spe-pmu;
-
-    soc {
-        /*
-         * disable IOMMU until we have a proper support in xen
-         */
-        /delete-node/ iommu@4f000000;
-        /delete-node/ iommu@4f400000;
-
-        /*
-         * Set extra registers required for PCI quirks to communicate with SCP
-         * and remove invalid properties due to removal
-        */
-        pcie@68000000 {
-            reg = <0 0x68000000 0 0x1200000>,
-                    <0 0x06000000 0 0x80000>,
-                    <0 0x62000000 0 0x80000>;
-            /delete-property/ msi-map;
-            /delete-property/ iommu-map;
-        };
-
-        pcie@70000000 {
-            reg = <0 0x70000000 0 0x1200000>,
-                    <0 0x06000000 0 0x80000>,
-                    <0 0x60000000 0 0x80000>;
-            /delete-property/ msi-map;
-            /delete-property/ iommu-map;
-        };
-    };
-};

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen-devicetree/xen-devicetree.bbappend

@@ -1,23 +0,0 @@
-# Platform dependent parameters
-
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-
-# Add a dtb snippet to turn off iommu in dom0 on Juno board
-SRC_URI_append_juno = " file://xen-juno.dtsi"
-XEN_DEVICETREE_DTSI_MERGE_append_juno = " xen-juno.dtsi"
-
-# Add a dtb snippet to remove pmu and iommu in dom0 on N1SDP
-SRC_URI_append_n1sdp = " file://xen-n1sdp.dtsi"
-XEN_DEVICETREE_DTSI_MERGE_append_n1sdp = " xen-n1sdp.dtsi"
-# For N1SDP, the XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables are
-# being set in meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc
-
-# Board specific configs
-XEN_DEVICETREE_DOM0_BOOTARGS_append_juno = " root=/dev/sda1 rootwait"
-XEN_DEVICETREE_XEN_BOOTARGS_append_juno = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
-
-XEN_DEVICETREE_DOM0_BOOTARGS_append_n1sdp = " root=/dev/sda2 rootwait"
-XEN_DEVICETREE_XEN_BOOTARGS_append_n1sdp = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
-
-XEN_DEVICETREE_DOM0_BOOTARGS_append_fvp-base = " root=/dev/vda2"
-XEN_DEVICETREE_XEN_BOOTARGS_append_fvp-base = " console=dtuart dtuart=serial0 bootscrub=0"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen/files/fvp-base/early-printk.cfg

@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_FASTMODEL=y

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen/files/juno/early-printk.cfg

@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_JUNO=y

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen/files/n1sdp/early-printk.cfg

@@ -1,3 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_UART_CHOICE_PL011=y
-CONFIG_EARLY_UART_BASE_ADDRESS=0x2a400000

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen/files/n1sdp/n1sdp.cfg

@@ -1,5 +0,0 @@
-CONFIG_EXPERT=y
-# Enable ACPI support
-CONFIG_ACPI=y
-# Enable ARM Interrupt Translation Service (ITS) emulation
-CONFIG_HAS_ITS=y