Early Boot of remote processors is supported at the SPL stage of the
bootloader. Currently, SPL looks for the remoteproc firmwares in the
boot partition.
Therefore, add the rproc firmware to the boot partition of wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Early boot of remote processors from SPL stage of bootloader requires
the remoteproc firmware to be present in the boot partition. Deploy this
rproc IPC firmware so that it can be copied to the boot partitions of
the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Add a SECURITY file with hints for security researchers and other
parties who might report potential security vulnerabilities.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
We got a bit more time to do a proper migration this time. A discovery
period to see what actually works and boy, it wasn't much.
This update resolves issues with:
- Macro redefinition
- Sparse NPOT texture allocations
- vec4 reductions
- Mesa image extensions
- Buffer allocations under weston
- Devices with both a RENDER and PRIMARY display node
- Underprivileged users being unable to allocate buffers
- Removed call to drm_map_legacy
- Replace deprecated kernel calls
- Fix some cache attributes for userspace allocations
- About 40 other various errors and warnings
This core was never fully GLES2 conformant. In fact, if you try to run
cts on any of the older releases you'll find yourself in a hardware
recovery loop pretty quickly. We've gotten it to about 94.2% conformance
with these patches.
There are still dragons here, but they are at least a little more
manageable.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Update linux-bb.org to 6.1.80 for both 32 and 64 bit platforms
* Update DTB/DTBO lists to include latest renames and additions
* Re-enable vendored DTB layout by default
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Separate FAT boot partition holds SPL, SYSFW and U-boot images, while
rootfs places kernel images and DTBs into /boot directory. So it is not
desirable to mount boot FAT partition into /boot directory of the rootfs
and shadow its original content - adjust corresponding entry in wic
templates.
While at it, remove unused ondisk parameter when using use-uuid, which
takes precedence and is more flexible.
Note: boot FAT partition will be automounted at /run/media/boot-mmcblk0p1/
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This upgrade contains the following changes:
* updated hostapd path in ap_start.sh
* ap_stop.sh removes wlan1 interface
* hostapd.conf updated to work seamlessly with hostapd 2.10
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
It is useful to have U-boot initial environment deployed for future
reference or to initialize environment files as part of the build.
In multiconfig setup, such as TI K3 platforms, building U-boot
multiple times for Cortex-R5 and Cortex-A53 cores results in file
conflicts when deploying under the same name. To avoid that, those
initial-env files were removed at the end of the do_deploy task.
But it is better to only remove them for k3r5 multiconfig, since
that only builds SPL and saved env doesn't make much sense, but
preserve and deploy initial-env for the main machine multiconfig.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
am69 and am68 sk boards supports V3Link cameras interfaced via V3Link
camera fusion board. Refer to
commit b7a97b1b (conf: machine: am62axx: Pick overlays for V3Link cameras)
for details
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
j722s-evm supports capture from fpdlink cams via fpdlink fusion1 board
or V3Link camera fusion board. So package fpdlink camera overlays
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for jailhouse recipe which will add changes for Out of Box
demo and also a new application to test whether the linux inmate cell has
crashed or not.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Latest ti-u-boot will be supporting HSSE1.0 and HSFS1.0 versions of the
j7200 soc through the binman dts nodes. Add support in yocto to package
the created binaries in the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Latest ti-u-boot will be supporting HSSE2.0 and HSFS1.1 versions of the
j721e soc through the binman dts nodes. Add support in yocto to package
the created binaries in the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update from 0.6.4 to 0.6.6.
This update brings the following fixes from ti-rpmsg-char repo.
55a6f40 remove ti.ipc4.ping-pong reference
8892e57 lib: fix data type build warnings
7c2ab48 lib: fix build warnings
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The new V3Link camera fusion board [1] comes with a CSI to FPDLink
serializer board, which allows interfacing multiple 22-pin FFC
compatible sensors with SK-AM62A.
Currently overlays for interfacing IMX219 sensor with V3Link are built
as part of the TI linux kernel, so pick these in the BSP filesystem.
[1]: https://www.arducam.com/fpd-link-3-cameras/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Stop using UBOOT_LOCALVERSION, and copy what is done in the kernel recipe. This
allows us to set the correct SHA into the version string even if AUTOREV is used
since SRCPV is no longer set in oe-core.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The use of KERNEL_LOCALVERSION for controlling the kernel version has
changed recently. Placing the value of KERNEL_LOCALVERSION in
.scmversion was causing it to duplicate the string in the final version.
Instead, drop KERNEL_LOCALVERSION to just identify that it comes from
TI, and that it is an RT kernel. Additionally, place the commit sha for
the kernel into the .scmversion file explicitly to be both backward and
forward compatible.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch moves the jailhouse recipe general variables to a
ti-jailhouse.inc file along with fetch and compile task.
Jailhouse repo also contains some demo applications which can
be packaged alone in filesytem and does not require packaging
jailhouse module, firmware and tool.
So add a new recipe jailhouse-inmate which can be used to only
package those demos. The existing jailhouse recipe will contain
variables and other dependencies needed for do_install task for
jailhouse module, tools, demos etc. The do_install of jailhouse
inmate recipe will only package demo applications.
This new recipe(jailhouse-inmate) will be added to a new image
in meta-arago. The new image will be used for jailhouse second
linux instance or cell.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to include a fix for suspend and resume. Unfortunately
version 23.3 includes a partial rework of the power management subsystem
that breaks OS active power management. Apparently it also broke OS
suspend/resume by incorrectly setting OS state before the device state
was updated and trying to fall back on device default behavior in
certain paths.
This fixes OS suspend/resume but unfortunately full OS APM will need a
little more work.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Update linux-bb.org to 6.1.69 for both 32 and 64 bit platforms
* Update u-boot-bb.org to the latest 2023.04 based on SDK 9.1 release
* Update DTB/DTBO lists to include latest renames and additions
Note: all changes are in a single commit for bisectability
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The current master has the support for power off functionality, update
to that.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update all OP-TEE components to 4.1 tag. OP-TEE examples are already in
4.1 tag.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add TI logo image as bootsplash image file for AM62P and install it in
boot directory from where u-boot can read from and display during
boot-up time.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Migrate to version 23.3.6512818, this includes the stability updates
released in 23.2 as well as some additional modifications to help with
userspace application support, namely Chromium.
We're also dropping the x11 window system extensions from the Vulkan
libraries for now. Ideally, both x11 and wayland extensions will be
provided by mesa's vulkan-wsi-layer in the future, but currently x11
isn't supported and this just added extra complexity to the package in
Yocto.
Signed-off-by: Randolph Sapp <rs@ti.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to include some useful patches that:
- Fix the ROGUE segfault issue introduced by SGX (this was what
the old conditional logic was addressing)
- Fix destruction of event queue with proxies still attached
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras for am62xx-lp to control the kernel and u-boot
repos, branches, and srcrevs via the TI_EXTRAS variable in the local.conf
file.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that 2024.01 is official, the logo that am62xx-evm installs is
available in all versions of the repo that we point to. Move all of
that code out of the .bb files and into the u-boot-ti.inc file.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump SRCREV to include the following changes in UM and KM:
- Rebuild all releases with external memory wrap disabled due to
some incompatibility with certain Qt use cases.
- Add a watchdog change that prevents an occasional false
timeout when servicing long DM processes.
- Rely on snooping to perform certain cache operations and
results in decreased overhead for device -> cpu
communications.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
j722s is same GPU as am62p, need to add this into machine definition so
that Rogue driver gets included in the image.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fetch from the latest commit which has J722S support now.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove config files from /usr/share/jailhouse as they are not required.
Package only the cell files for respective devices and not all k3 files.
Update FILES:PN to use wildcard.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
RPM does not accept '-' as a character in the PR/version and fails with:
| error: line 4: Illegal char '-' (0x2d) in: Release: sgxrgx-54fd9d7dea098b6f11c2a244b0c6763dc8c5690c.1
The correct approach is to reference SRCPV and not SRCREV and also add it
to PV and not PR. But PV is used in the branch to fetch the sources and
cannot be modified, so use SRCPV in PR w/o any illegal characters.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With the current implemetation is not possible to remove the '-k3r5'
customization using overrides like below and the '-k3r5' always stay there.
| TMPDIR:remove:k3r5 = "-k3r5"
| or
| TMPDIR:k3r5 = "${TOPDIR}/tmp"
This patch allows to build the core-image-minimal in oe-core master/nanbield
without any issue on a common TMPDIR folder just using the following:
| TI_COMMON_DEPLOY = "${DEPLOY_DIR}"
| TI_TMPDIR_APPEND = ""
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the BB.org kernel to the latest. Also update BeaglePlay device
tree list, as there were some renames and new additions.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit [1] created a common LPM wkup sources overlay and removes
k3-am62x-sk-mcu-gpio-wakeup.dtso for am62 device family.
k3-am62x-sk prefix picks this overlay for am62xx, am62axx and am62xxsip already.
This patch picks the necessary overlay for am62xx-lp-evm since it doesnt use
the same prefix as other am62 platforms.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=4ba1886b886d
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for ti-jailhouse. All the patches which was being applied via yocto
have been moved to ti-jailhouse repo now. So remove the patches from SRC_URI and
files.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras for am62pxx to control the kernel and u-boot
repos, branches, and srcrevs via the TI_EXTRAS variable in the local.conf
file.
Also add am62pxx as compatble machine in jailhouse recipe. So the am62pxx
jailhouse build can be done by adding TI_EXTRAS=tie-jailhouse in local.conf.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A bug was introduced while trying to unify the Mesa version that is used
on SGX GPU's and Rogue GPU's. It manifests itself as an immediate segfault
whenever you try and run something like glmark2-es2-wayland or
weston-simple-egl on certain Rogue based platforms (specifically am62x).
Use different srcrev for Rogue GPU and SGX GPU platforms. The SGX GPU platforms
will use the latest commit. Rogue GPU platforms will use the last good working
commit before SGX related changes were introduced.
This change will be reverted once the issue is rootcaused and a common solution
is found for both Rogue and SGX based GPU platforms.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade to v6.3.0 version.
This release adds resources for using AM243x & AM64x PRU cores with cores
running FreeRTOS:
* The RTOS Getting Started Labs
* Examples for using PRU GPIO and the broadside interface
* SORTE_G example (a custom networking interface)
Bug fixes:
* AM64x & AM65x header files, fix the names of extended sections to be in the
format of
ConstantsTableName_0x100
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This k3r5 multiconfig builds baremetal components (and corresponding native,
nativesdk and cross tools) and sets TCLIBC accordingly to "baremetal". The
expectation is that those components and tools will use a separate TMPDIR
to isolate from the main Linux build that uses "glibc" TCLIBC and to avoid
potential conflicts.
OE-Core "nodistro" default configuration already sets TCLIBCAPPEND facility
to automatically add a suffix to TMPDIR, resulting in "tmp-baremetal" temp
directory for this multiconfig and "tmp-glibc" for the main Linux one. Other
distros like Arago follow this convention and even extend a bit (e.g. Arago
also adds TCMODE suffix to TMPDIR for external toolchain support separation).
But Poky (and derivative distros, like AGL or YoE) disable TCLIBCAPPEND and
result in a combined TMPDIR, leading to potential conflicts, such as:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=15273
And that's just the beginning, there were other conflicts observed later in
the build, e.g. during nativesdk builds - that's why we also set a unique
SDKPKGSUFFIX here.
To force a separate TMPDIR for k3r5 multiconfig, we have to directly append
a suffix to it. Multiple other options were tested in hopes of making it
slightly cleaner, but they either didn't work or were dismissed. For example,
trying to override TCLIBCAPPEND getting cleared by a distro would require
using a machine/soc-override, which doesn't have enough scope (nativesdk)
or forcing it with :forcevariable would also change the main Linux TMPDIR
and affect existing CI flows. Also, using TCLIBC itself as a suffix to add
to TMPDIR may result in getting it appended twice (tmp-baremetal-baremetal)
when normal TCLIBCAPPEND facility is used. Hence the least invasive/confusing
option is to always append "-k3r5" suffix to this multiconfig TMPDIR. That
results in "tmp-k3r5" in Poky (leaving main TMPDIR as "tmp"), while OE-Core
"nodistro" and Arago would end up with "tmp-baremetal-k3r5" (and "tmp-glibc"
for the main).
Also note, meta-ti-bsp layer.conf sets up images and sdks to be deployed
into a common location outside of TMPDIRs, but TI_COMMON_DEPLOY variable
that controls it is set weakly, allowing to be modified from a distro
configuration or local.conf. It means that all images and sdks can be
deployed into the main TMPDIR if one's CI flow expects tmp/deploy/ as
the final destination, by using := for immediate variable expansion:
TI_COMMON_DEPLOY := "${TMPDIR}/deploy"
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit [1] renamed the MCU GPIO wakeup overlay as k3-am62x-sk-mcu-gpio-wakeup.dtbo
k3-am62x-sk prefix picks this overlay for am62xx, am62axx and am62xxsip already.
This patch picks the necessary overlay for am62xx-lp-evm since it doesnt use
the same prefix as other am62 platforms.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=24bd6ce832cd
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This was a temporary class to help with the v5.10 to v6.1 kernel
migration, now that we have completed that, remove this class.
Suggested-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As all our supported kernels are above 5.10 and can now build this
module, remove this disable.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We support Linux v6.1 as our official version for Kirkstone. The older
kernel version was kept around during the transition to the newer version,
but we are past that now. Remove this old version.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SRCREV is auto updated, but the PV still uses the old tag version,
update this to v0.3.
While here, we also now have a proper LICENSE file, use that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit f5851386 ("conf: machine: am62*: Pick common overlays by prefix")
picks common HDMI and CSI overlays for am62 platform variants.
Adding capability to extend the same prefix for common overlays for applicable
am62 platforms in more generic way to include new mcan overlays added [1]
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=3b01c392627f
given the differences in SK-AM62-LP containing B2B HDMI Samtec connector,
just added the kernel prefix to pick common mcan overlay.
for am62pxx: It has 4 MCANs vs all other am62xx devices have 3 MCANs,
hence keeping this prefix seperate for am62pxx to pick right overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are all useful for firmware recipes but some recipes did not have
them. For firmware including ti-linux-fw.inc let's add these all to
one spot and remove them from any recipe that did already have these.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These defines are specific to a SoC, not any specific board. Move these
to the SoC level for these boards to be consistent with boards already
doing this correctly.
J7200 didn't have these at all, add them while we are here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The common include ti-linux-fw.inc already includes setting this, no need
to set it in each recipe, remove that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is no compilation in this simple firmware recipe, no need for
these lines, remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are common for all recipes that include ti-linux-fw.inc, add
it to this include file and remove from each recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras features for rt as it was added for non
rt kernel and u-boot earlier. It will also be accessible via the
TI_EXTRAS variable in the local.conf file.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Don't try to locate TI-TFL license within meta-ti-bsp relative to OE-Core
using COREBASE, as the directory structure of the layers is not guaranteed.
Instead, point to it relative to the recipe itself.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Minor rework of the TI include files used to override both SRCREV and
other settings in the optee recipes for TI SOC parts. The intent is to
make it more clear when we are changing SRCREVs versus changing other
items, and allow for sharing the SRCREV changes for optee-os-tadevkit
which should track the optee-os SRCREV.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to latest commit for both u-boot and linux
extras. Also update SRCREV for jailhouse branch for both psdk
linux and u-boot.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The previous allowance for overriding the value for the kernel is
incorrect. The kernel should not be changed from linux-dummy for the
k3r5 multiconfigs.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move to setting the values for PREFERRED_PROVIDER using the
?= default assignment so that we can override the setting if
we would like to.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Massimiliano Minella <massimiliano.minella@se.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move to the 23.2 release branch and bump SRCREV accordingly. This branch
has the proper implementation of the cache coherency fix along with some
other checks that address some system stability issues on Jacinto
devices.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump SRCREV to include some patches to better isolate SGX and PVR
components.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Instead of making kernel RDEPENDS on devicetree and different FW images with
lots of machine-override appends that are hard to modify downstream, use proper
MACHINE_ESSENTIAL_EXTRA_RDEPENDS and MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS vars
that are specifically designed for this purpose.
This also makes such dependencies generic and not tied to a particular kernel
recipe including kernel-rdepends.inc with the entire machine-specific list.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS per platform to list recommended
essential FW images to be added to rootfs by default.
Correct beagle-x15 to pull devicetrees and kernel image as well.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Majority of Beagle devices use ti-u-boot repo from u-boot-ti-staging directly.
But some latest devices may need to point to own tree with additional support
added that is not yet upstream, e.g. BeaglePlay.
Add the Beagle-specific recipe and point beagleplay to use it. Other devices
can switch to using it as well, if desired, but right now the code base is the
same for other Beagle devices.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update both 32-bit and 64-bit configs to use the latest 6.1 Linux kernel
from beagleboard.org repository, which is based on ti-linux-kernel repo
used in linux-ti-staging, but with extra Beagle-specific features on top.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update DTB/DTBO list to only upstreamed devicetrees and overlays. This
help with migration to kernel 6.1, which doesn't have BB.org specific
overlays.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update DTB/DTBO list to only upstreamed devicetrees and overlays. This
help with migration to kernel 6.1, which doesn't have BB.org specific
overlays.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since the introduction of TI_COMMON_DEPLOY, we've been seeing frequent
Pseudo errors [1] breaking image build during development, in particular
with partial rebuilds due to the externalsrc bbclass.
The relevant part of the error log seems to be the following:
ERROR: Task (/home/schifferm/Devel/src/ci-meta-tq-kirkstone/sources/meta
-tq/meta-dumpling/recipes-images/images/tq-image-generic-debug.bb:do
_rootfs) failed with exit code '1'
Pseudo log:
path mismatch [1 link]: ino 12215614 db '/home/schifferm/Devel/src/ci-me
ta-tq-kirkstone/build-mba64xx/deploy-ti/images/tqma64xxl-mbax4xxl/tq
-image-generic-debug-tqma64xxl-mbax4xxl-20231020091917.testdata.json
' req '/home/schifferm/Devel/src/ci-meta-tq-kirkstone/build-mba64xx/
tmp/work/tqma64xxl_mbax4xxl-tq-linux/tq-image-generic-debug/1.0-r0/r
ootfs/usr/share/stress-ng/example-jobs/device.job;65324e26'.
My understanding is that all deploy dirs should be ignored by Pseudo, as
openembedded-core/meta/bitbake.conf includes the whole of DEPLOY_DIR in
PSEUDO_IGNORE_PATHS. With the introduction of TI_COMMON_DEPLOY,
DEPLOY_DIR_IMAGE is not covered by that setting anymore, so we add it in
meta-ti to avoid the issue.
[1] https://wiki.yoctoproject.org/wiki/Pseudo_Abort
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV to include the required changes to build for SGX now.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump ti-sgx-ddk-um and ti-sgx-ddk-km to the new branch for Kirkstone and
mesa independent builds. This also sets up SGX to use the latest mesa
revision rogue uses.
Changelog:
- IMG Support has officially ended. This repo will not be getting
regular updates after this unless things are really broken.
- The Mesa patches which were previously being relicensed internally
were opened and combined with the unofficial rogue efforts on
freedesktop.
- Toolchains were upgraded and multiple warnings and issues were
addressed. Hardware recoveries work now, but there are still some
longstanding issues with SGX that remain to be addressed if further
resources are set aside for that.
- We moved to an lws-generic build target to avoid rebuilding external
components. As such, these external components must be patched as
needed. Libdrm is an example of this and the required patches can be
found in meta-ti.
Known bugs:
- Buffer allocations under Weston may misbehave
- GLSL macro redefinitions will cause errors regardless of whether or
not they are identical
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Makes ti-ipc firmware as default for main-r5f0_0 firmware softlink
The ti-eth-fw binaries are tested at the SDK level and should be
made default only at that level
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The main-r5f0_0 softlinks should be pointing to the ethfw binaries
instead of the mcu-r5f0_0
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit cd13cafd65.
Some devices need ti-fs-stub-* firmware for the uboot aarch64 build
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Revert ebcf15bf0f :
"recipes-bsp:ti-sci-fw: Add k3r5 as COMPATIBLE_MACHINE"
Extend recipe to k3 machines too, to provide ti-fs-stub-* firmware
for u-boot aarch64 build.
Update do_deploy() to allow multiconfig builds for k3 machines
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fixes the QA warnings about package contains reference to TMPDIR.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently the do_compile step fails if we try to implement UBOOT_CONFIG
in an attempt to build U-Boot with multiple R5 defconfigs.
This commit adds a condition to handle linking the UBOOT_BINARY if
UBOOT_CONFIG is used in place of UBOOT_MACHINE.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The previous patch is incorrectly accepted and released. This patch
applies the logic that was discussed on the mailing list.
- Create a new variable grouping for SPL_HS_MLO
- Update the install/deploy code to reference the new variables.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The common u-boot-ti.inc file still uses the old license checksum
from 2021 U-boot. There were formatting changes in the license text
between 2021 and 2023 and version-specific recipes had the license
checksum updated to the new value. Since there are no 2021 recipes
remaining, the new license checksum can be set in the common .inc
file generically.
Note: U-boot license hasn't changed and the same checksum is simply
being moved from the recipes to the common .inc file.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Preserve the directory structure of the deployed dm firmware so that one
can directly specify the deploy directory for binman based u-boot build.
Additionally, this makes it easier to preserve the same structure inside
the prebuilt-images directory of the tisdk-core-bundle for the same reason.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Deploy the sysfw binaries to the DEPLOYDIR, to be picked up by the
tisdk-core-bundle... for the prebuilt binaries directory
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SPL binary built by u-boot for SD/MMC/eMMC media on HS platforms is
u-boot-spl_HS_MLO. Thanks to this fix, the binary is properly installed
and deployed.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe only provides the sysfw binaries compiled for the r5
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
ti-sci-fw should be needed by the binman u-boot build only for the k3r5
machines and not for the k3 machines
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OP-TEE OS provides a handful of TAs itself. While these are often meant
to be built-in, when they are not we should deploy them as part of the
OP-TEE OS package so they can be loaded at runtime.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Only move directories which haven't already been moved.
This prevents a build error should a subsequent bitbake execution
rerun do_install where the sources to 'mv' no longer exist.
| mv: cannot stat 'ti-img-rogue-umlibs/23.1.6404501/git/targetfs/am62_linux/lws-generic/release/lib/firmware': No such file or directory
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
multi_v7_defconfig that is used for legacy platforms enables
SMP by default.
Platforms like am335x and am473x are single core platforms that
doesnt need this option to be enabled.
This config cannot go in multi_v7_defconfig as well,
since there will be systems like am57x/dra7x or other community platforms
which can have multiple arm cores.
Adding the provision to disable SMP configuration for applicable platforms like
am335x and am437x.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updates SRCREV, PV, and BRANCH for armv7a targets and fixes
failure to mount /boot when using poky with systemd. The
kernel selected supports VFAT without initramfs as noted
here - https://lists.yoctoproject.org/g/meta-ti/message/16913
Removes defconfig patch setting LZMA, as the new kernel
already defaults to LZ4.
Tested by running `bitbake core-image-base` with this patchset,
and then booting a pair of Beaglebone Black devices from the
resulting image. Prior to the change, systemd boots to a
maintenance mode having failed to mount /boot. After the change,
the system boots normally and /boot is mounted.
Suggested-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Anthony J. Martinez <anthony@ajmartinez.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Jacinto platforms use first R5 MCU core for DM firmware. When DM firmware was
split out into own recipe[1], ALTERNATIVE_TARGET entries got removed from
ti-rtos-firmware recipe, but corresponding ALTERNATIVE_LINK_NAME entries
remained, causing warnings. Clean up those now.
[1] https://git.yoctoproject.org/meta-ti/commit/meta-ti-bsp/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb?id=b21d29d94694ac49b97a1f4ba428c7d8cd6fb64a
Fixes these warnings:
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j7-mcu-r5f0_0-fw or /usr/lib/firmware/j7-mcu-r5f0_0-fw.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j7-mcu-r5f0_0-fw-sec or /usr/lib/firmware/j7-mcu-r5f0_0-fw-sec.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j7-mcu-r5f0_0-fw: /usr/lib/firmware/j7-mcu-r5f0_0-fw.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j7-mcu-r5f0_0-fw-sec: /usr/lib/firmware/j7-mcu-r5f0_0-fw-sec.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j7-mcu-r5f0_0-fw == /usr/lib/firmware/j7-mcu-r5f0_0-fw
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j7-mcu-r5f0_0-fw-sec == /usr/lib/firmware/j7-mcu-r5f0_0-fw-sec
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j7200-mcu-r5f0_0-fw or /usr/lib/firmware/j7200-mcu-r5f0_0-fw.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j7200-mcu-r5f0_0-fw-sec or /usr/lib/firmware/j7200-mcu-r5f0_0-fw-sec.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j7200-mcu-r5f0_0-fw: /usr/lib/firmware/j7200-mcu-r5f0_0-fw.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j7200-mcu-r5f0_0-fw-sec: /usr/lib/firmware/j7200-mcu-r5f0_0-fw-sec.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j7200-mcu-r5f0_0-fw == /usr/lib/firmware/j7200-mcu-r5f0_0-fw
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j7200-mcu-r5f0_0-fw-sec == /usr/lib/firmware/j7200-mcu-r5f0_0-fw-sec
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j721s2-mcu-r5f0_0-fw or /usr/lib/firmware/j721s2-mcu-r5f0_0-fw.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j721s2-mcu-r5f0_0-fw-sec or /usr/lib/firmware/j721s2-mcu-r5f0_0-fw-sec.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j721s2-mcu-r5f0_0-fw: /usr/lib/firmware/j721s2-mcu-r5f0_0-fw.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j721s2-mcu-r5f0_0-fw-sec: /usr/lib/firmware/j721s2-mcu-r5f0_0-fw-sec.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j721s2-mcu-r5f0_0-fw == /usr/lib/firmware/j721s2-mcu-r5f0_0-fw
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j721s2-mcu-r5f0_0-fw-sec == /usr/lib/firmware/j721s2-mcu-r5f0_0-fw-sec
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j784s4-mcu-r5f0_0-fw or /usr/lib/firmware/j784s4-mcu-r5f0_0-fw.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alternative target (/usr/lib/firmware/j784s4-mcu-r5f0_0-fw-sec or /usr/lib/firmware/j784s4-mcu-r5f0_0-fw-sec.ti-rtos-firmware) does not exist, skipping...
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j784s4-mcu-r5f0_0-fw: /usr/lib/firmware/j784s4-mcu-r5f0_0-fw.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: NOT adding alternative provide /usr/lib/firmware/j784s4-mcu-r5f0_0-fw-sec: /usr/lib/firmware/j784s4-mcu-r5f0_0-fw-sec.ti-rtos-firmware does not exist
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j784s4-mcu-r5f0_0-fw == /usr/lib/firmware/j784s4-mcu-r5f0_0-fw
| WARNING: ti-rtos-firmware-08.02.00.04-r4.1 do_package: ti-rtos-firmware: alt_link == alt_target: /usr/lib/firmware/j784s4-mcu-r5f0_0-fw-sec == /usr/lib/firmware/j784s4-mcu-r5f0_0-fw-sec
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Make sure shortname R5 SPL symlink is not the same as the main K3 SPL
one, as they will overlap/overwrite each other when deployed into a
common location. Latest code in master now checks for this and errors
out.
Also remove unused UBOOT_SPI_* variables.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are couple of k3r5 components that need to be built for the target
and they are self-contained and don't use glibc. Moreover, when building
a cross-compile toolchain for k3r5, there's no need to build glibc and
all its dependencies. While build-time speed up is nice, the main benefit
comes when packaging a nativesdk toolchain for distribution, reducing the
number of packages and the resulting size of the toolchain installer.
To avoid potential namespace conflict in package feeds between nativesdk
binary packages of Linux glibc and k3r5 baremetal toolchains, adjust the
package suffix accordingly.
This also requires a rather impactful change in the deployment structure,
which affects CIs and user experience. By default different TCLIBC builds
(e.g. glibc and baremetal in this case) are built in separate TMPDIRs to
avoid conflicts, especially on the nativesdk side. Also the default config
has DEPLOY_DIR residing under corresponding TMPDIR. Of course, this can be
changed by local.conf or <distro>.conf, which meta-ti-bsp has no control
over. Unlike multiconfig-image-packager example that can access deployed
artifacts across multiconfigs to package in an image, we use wic and its
IMAGE_BOOT_FILES list to package a final image. Unfortunately, wic cannot
access deployed artifacts across multiconfigs in separate TMPDIRs, as it
uses DEPLOY_DIR_IMAGE to collect the artifacts. To overcome this, we need
to set up a "common" deploy directory for images and sdks produced by
multiconfigs, which is located outside of TMPDIRs, set by TI_COMMON_DEPLOY
variable that can be changed or adjusted by distros as needed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
- Add A53 and R5 machine configurations for am62xxsip-evm.
- Use UBOOT_CONFIG_FRAGMENTS as am62xsip_sk_r5.config in R5 machine configuration. This will ensure we
build u-boot-r5 with baseconfig as am62x_evm_r5_defconfig and config fragment as am62xsip_sk_r5.config.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
- U-boot recipe in OE-Core supports out-of-tree config fragments that are passed via
SRC_URI and automatically merges all *.cfg files as fragments. This makes specifying
config fragments in the machine configuration a bit difficult. Hence, add a logic which
will ensure we handle u-boot config fragments using a new variable UBOOT_CONFIG_FRAGMENTS.
- The u-boot-mergeconfig.inc will allow us to build u-boot with list of config fragments
specified in UBOOT_CONFIG_FRAGMENTS along with the base defconfig mentioned in UBOOT_MACHINE.
- Include u-boot-mergeconfig.inc in u-boot-ti.inc
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Meta-clang provides a bbappend for mesa to use clang to accelerate it's
rasterization with runtime code generation through the use of llvmpipe.
With the addition of mesa-pvr we no longer get this for free with the
blanket mesa bbappend on the devices that explicitly request mesa-pvr so
lets add a dynamic layer to append the same args meta-clang does.
Though the number of devices that would select pvr-mesa and still want
to use software rendering is small, it's not zero due to debug and
testing purposes.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SRCREV change corresponds to a commit that changes from make to
cmake for building k3conf, so we need to update the recipe as well.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The uboot config for am65 is moving to a merged build for both GP and
HS. Until the yocto configs catch up, we need to keep am65xx-hs-evm
working.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the QA checks done on the build artifacts to include [buildpaths] since
the PRU linker includes these paths in its output. This avoids build warnings
or errors of the type:
pru-icss-6.2.0-r1 do_package_qa: QA Issue: File /lib/firmware/pru/PRU_Halt.out in package pru-icss-halt contains reference to TMPDIR [buildpaths]
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Sometimes on am335x devices, no more output is printed after
"Starting kernel..." message. Modify UBOOT_EXTLINUX_KERNEL_ARGS
to enable the console before standard serial driver is probed.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Previously k3 mcdepends for k3r5 artifacts has been changed from do_image_wic
to support non-wic builds in other layers and do_image_complete was believed
to be sufficient. Switching k3r5 to baremetal builds has exposed another race
when some pieces come from sstate and hence requires using do_image instead.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The latest kernel has made the change to add vendor subdirectories into
the arch/arm/boot/dts directory. This effectively breaks the
KERNEL_DEVICETREE settings in the machine configs for 32bit platforms,
so switch them over to using the PREFIX variable. Also change the
linux-ti-next to use the PREFIX setting for KERNEL_DEVICETREE.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With the change to the vendored arch/arm/boot/dts directory, we need to
add support to the KERNEL_DEVICETREE_DTBMERGE to make it a search
pattern instead of a fixed list.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add in missing *-sec links pointing to signed files especially for
j784s4. Reformat file a little to make the groupings easier to
manage in the future when looking to see if -sec links are missing.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following MACHINE_FEATURES are not matched against anywhere, remove:
* kernel26
* ethernet
* mmc
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit 5f9be22839 ("machine: Add AM62Q HS-SE evm configuration")
has added am62xx-lp.inc which is used by am62xx-lp-evm machine.
The features listed in am62xx.inc are common between machines
am62xx-evm and am62xx-lp-evm. (Ex: MACHINE_FEATURES = "gpu")
Hence updating the necessary include file to have
common features to be enabled between these two platform variants.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the SRCREV for the umlibs and driver package to include some fixes
for Jacinto devices. These patches do the following:
- Fix virtual memory addressing
- Resolve an issue with APM and debug requests
- Attempt to resolve most of the cache coherency related issues on
Jacinto devices
- Introduce some extra cache maintenance operations in the kernel
module
It also introduces the following known issues:
- Visual artifacting on the second-to-last EGL/GLES context on BXS
based devices (J721S2/J784S4)
We're still working on that last one, but the stability improvements
make this worth while for now.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The address 0x80008000 was used in pre-K3 devices. ARM64 requires the
kernel loaded to a 2MB aligned address when not using KASLR. For FIT
set the address to 0x81000000 which gives the kernel 32MB before running
into the FDT at 0x83000000.
If you get this error someday then your kernel is too large and either it
or FDT needs relocated in memory:
ERROR: image is not a fdt - must RESET the board to recover.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade to v6.2.0 version.
This release supports Linux kernel 6.1.
The RPMsg library in previous versions of the PSSP will not work with
the PRU RPMsg drivers in Linux kernel 6.1.
Other changes in this version:
* Bug fixes:
- Getting Started Labs, fix "zero" command clearing too many bytes
- Include files, add a missing parentheses to pru_cfg, pru_ctrl, pru_ecap
* Update ReadMe files to point to the latest URLs
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update ti-rpmsg-char library to fix wrong rpmsg-ctrl
device ids observed when multiple remote procs are present
with multiple channels opened.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following patch was dropped from the SRC_URI one of my previous
graphics overhaul patches:
0001-compiler-support-OpenEmbedded-nodistro-internal-aarc.patch
Actually remove it from the source tree now that upstream is carrying
the equivalent to help enable other tools.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upstream changed to not be so picky about compilers. Bump SRCREV so the
odd things using our recipes are happy again.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Edit the file paths so they point at files in the source directory
explicitly. For some reason shell glob were previously only respected by
some machines.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* rpmsg_client_sample is a test module and should not be autoloaded
* Both k3_r5 and k3_dsp remoteproc modules depend on virtio_rpmsg_bus
Cc: Denys Dmytriyenko <denys@ti.com>
Cc: Ryan Eatmon <reatmon@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Apurva Nandan <a-nandan@ti.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use RRECOMMENDS for components. Apparently I made an resolvable
dependency cycle that Yocto silently clipped. My best guess at the
culprit was: mesa-megadriver (RR) -> rogue-km (RR) -> rogue-um (RD) ->
libgles1-rogue (RD) -> mesa-megadriver
That killed the ti-img-rogue-umlibs recipe during do_rootfs. The rogue
GLES libs do depend on mesa-megadriver at runtime but I guess the UM
components should only really recommend the rogue GLES components be
present at runtime to make the cycle resolvable by opkg.
Fixes:
1705f6d3 (ti-img-rogue-umlibs: make all components optional, 2023-06-21)
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that driver support is added to support switch mode
for AM64, update recipes to package the switch firmware.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We need to package up new HSR firmware for am65x-sr2. Add dependencies
for them on the correct platforms.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bumping into the limitations of the binary_package class. This change
allows all rogue components to be optionally packaged without blowing
out the dependency chain.
Add a python function to fetch file paths from the FILE vars for each
component so we don't end up double tracking files. Add variables to
track component packages if things split up more later. Add a package
config string to set runtime dependencies and recommendations. Change
all logic to revolve around the PACKAGECONFIG instead of distro
features.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
When the ti-eth-fw recipe was split out from the ti-rtos-firmware recipe
we forgot to add it as a dependency.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add TI logo bitmap image as image boot file so that it gets
copied to boot partition and A53 SPL or U-boot proper
can load it and display during board bootup.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Early splash screen support for AM62x has been enabled in u-boot
and it requires bitmap tarball to be present in boot partition
as per the default environment settings done in u-boot [1].
Copy the ti logo bitmap tarball to boot partition of wic image in order
to enable out of box early display on AM62x.
[1] https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This firmware is shipped with the rest of ti-sysfw blobs, it shares
the same versions too and so should be simply bundled with the same.
This stub is also built into U-Boot and not loaded during kernel
runtime anymore, so remove the RDEPENDS in kernel.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are some features that will either never be accepted into the
upstream kernel, or are not ready to be accepted. ti-extras allows for
controlling the kernel and u-boot repos, breanches, and srcrevs to gain
access to those features via the TI_EXTRAS variable in the local.conf
file.
Initial support for TI_EXTRAS=tie-jailhouse is being added by this
patch.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Well, flew a bit too close to the sun on that last patch. Apparently
there are a few hidden runtime dependencies on the API devlinks that
make things like EGL upset when they aren't present.
We may circle back to this at some point but for now we're fine shipping
the devlinks in the base API packages as these links don't step on any
other package.
Fixes: 1899f5ea (ti-img-rogue-umlibs: bump version and explicitly
package, 2023-06-01)
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Apply the ti_rt.config fragment to all the linux-ti-staging-rt-6.1
defconfigs so we can properly build the RT kernel for our devices.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
SR2.0 firmware binaries should be used here as SR1.0 has been descoped.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This matches how we had the symlink for tiboot3.bin before binman.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This matches how we had the symlink for tiboot3.bin before binman.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.6.1 version to fix rpmsg_ctlr
id on v6.1 kernel when multiple channels are created.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
U-Boot with binman will do the signing as these images are packaged.
Do not rename the DM image as the signed image.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
U-Boot with binman will do the signing as these images are packaged.
Remove signing steps here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
U-Boot with binman will do the signing as these images are packaged.
Remove signing steps here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The platforms with combined boot image have full names for tiboot3.bin
and to keep things consistent we can do the same here. Deploy these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The platforms with combined boot image have full names for tiboot3.bin
and to keep things consistent we can do the same here. Deploy these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In U-Boot the names of these files have been updated to match our
expected defaults. Remove these fixups.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The defaults set in am62xx.inc are correct now and these can be dropped.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Everything is the same, so just include the non-HS config to set vars.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Everything is the same, so just include the non-HS config to set vars.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The HS boards use the SR2 version of the silicon, ship that version
of the sysfw.itb image.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are not used anymore and most have been removed, these look
to be leftovers, remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This converts ti-sci-fw into a standard firmware provider package. We do
not need to do anything additional here with that firmware as U-Boot now
does that for us with binman.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This will no longer build after we switch away from k3-image-gen. Remove
this version and make 2023.04 the default.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This will no longer build after we switch away from k3-image-gen. Remove
this version until it can be rebased on the latest U-Boot with binman
support. For now switch current users of this over to u-boot-ti v2021.01.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
K3-image-gen is going away and we don't do SRCIPK packages like this
anymore anyway. Remove this recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the version and explicitly package all Khronos APIs separately.
This should be nice for those folks that want a headless opencl system
for tinkering and such.
This version includes experimental GEM support (for applications like
Chromium that like to poke at the render node) and a new Vulkan ICD
loader interface for better support with the Vulkan ICD loaders present
in Yocto.
This lifts a method from mesa used to force a common naming convention
for Vulkan, OpenCL, and OpenGLES libs to make things a little easier to
follow. Without it the target package names get scrambled based on the
shared object name.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move recipes to new subdir since we offer more than just libgles now.
Reusing the naming convention of the subdirectory used for the km
components for now.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit a4f0f492f1.
The file was updated in upstream oe-core for kirkstone. This commit is
no longer needed.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit bdc8e7c9b5.
The file was updated in upstream oe-core for kirkstone. This commit is
no longer needed.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is only one user of these include files, expand the files inside
the one user and remove the includes.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This file should be whittled away over time, remove currently unused
paths to help us take inventory of what remains.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Like with master, move the actual TI-specific changes into corresponding
include files that are only activated for ti-soc derived platforms.
Since include files are already guarded and only activated for ti-soc
platforms, no need to use such override again.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Cleanup the J* APM patch a little. Apparently I could have stood to read
the docs a little more. Found some better runtime pm functions and also
discovered something new about the power island definition.
Notes from upstream:
- Add the CCB coherency HACK from DDK 1.15 to improve stability
on J* devices
- Fix power island support on J* devices
- Use better APM calls so user modification to power domains
don't cause the device to enter a bad state
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.6.0 version that enables the
support for 6.1 kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set the variables needed to put the DTBs into the same vendored
directory structure as they are in the kernel.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Change over to using the kernel_devicetree_vendor_dtb.bbclass to have
the DTBs installed into the same vendored subdirectory that is in the
kernel. Setting the variables comes in a follow on patch.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is a series of patches [1] [2] [3] that were submitted to oe-core
master that have gone through some iterations. It has partially stalled
in the upstreaming process but we need the effective changes to continue
our LTS plans for u-boot 2023.
This backports the effective changes of that patch against the kirkstone
version of the two classes, but renames them to make it obvious that we
are overriding them. This should be a temporary change as we expect the
changes to be backported to oe-core kirkstone once the stall is gone.
This patch will be removed once it makes it into oe-core kirkstone.
[1] https://lists.openembedded.org/g/openembedded-core/message/180753
[2] https://lists.openembedded.org/g/openembedded-core/message/181190
[2] https://lists.openembedded.org/g/openembedded-core/message/181191
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Rename the .wks to .wks.in so the EFI_PROVIDER variable is expanded
properly. We only ever set a soft recommendation for GRUB. If anyone
attempted to change that previously it was ignored (for more than just
the reason here, but that's out of my control).
Add a timeout for the bootloader menu. Currently setting it to 3
seconds.
Remove the read only flag on the rootfs. Not sure why that was there.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that are past the inital stages of our LTS migration, we can remove
the DEFAULT_PREFERENCE settings that prevented these recipes from being
the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As part of the initial LTS migration, move to the latest commits for the
various repos.
- ti-linux-fw
- u-boot-ti-staging_2021.01
- u-boot-ti-staging_2023.04
- k3conf_git
- linux-ti-staging-rt_5.10
- linux-ti-staging-rt_6.1
- linux-ti-staging_5.10
- linux-ti-staging_6.1
Going forward all updates will come from the CICD flow.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the src revision to enable the following features on Jacinto:
- Active power managment
- Power island control via firmware
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Stop looking for the rpmsg_rpc.h in the kernel. While we are doing the
LTS migration for kirkstone, this file is not going to be in the kernel
for a bit. This patch works in conjunction with a recipe change that
downloads the header and adds a -I to the CFLAGS to pick it up. This
will be removed once the 6.1 kernel has been updated.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
uboot will now use a merged defconfig build so keep the defconfig same
for hs here
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
u-boot 2023.04 merged def configs for HS and GP EVM into one.
This patch updates config for J721S2 HS EVM for both A72 and R5.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
u-boot 2023.04 merged def configs for HS and GP EVM into one.
This patch updates config for J7200 HS EVM for both A72 and R5.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
When creating the boot partition we copy all of the images for the
different board types (gp, hs-fs, hs-se), but one of those we consider
to be a default. That default is not copied with the longer name, but
rather with the tiboot3.bin name.
The issue comes when someone wants to boot with a different bin file.
They need to copy the approriate longer named .bin file to tiboot3.bin.
But then the original name of what tiboot3.bin is lost unless the use
backs it up.
This patch just additionally copies that longer named bin file so that
anyone who wants to look at the boot partiion and decide to boot for a
different board can know which file to copy to tiboot3.bin and does not
need to worry about making a backup.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid inheriting ti-secdev class and adding unconditional dependency
on TI_SECURE_DEV_PKG and other variables, when meta-ti-bsp is in the
bblayers.conf stack, but not building for TI platforms. This solves
yocto-check-layer signature test for Yocto Project compliance.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid inheriting ti-secdev class and adding unconditional dependency
on TI_SECURE_DEV_PKG and other variables, when meta-ti-bsp is in the
bblayers.conf stack, but not building for TI platforms. This solves
yocto-check-layer signature test for Yocto Project compliance.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are some unobvious issues with adding PVR support to Mesa
via a bbappend:
1. We need to mark mesa package as machine-specific, due to
differences in builds between SGX, Rogue and software-rendering
2. We also need to then mark mesa package as providing safe
ABIs (EGL/GLES/GBM) in order for all generic dependent packages
to not be treated as machine-specific, allowing their re-use
across different machines of the same architecture
But doing the above alters the upstream mesa package and changes
its signatures even when not building for TI platforms, which is
a Yocto Project compliance violation.
In order to resolve this issue, convert Mesa bbappend, that adds
PVR support, into its own standalone alternative provider, called
mesa-pvr and allow selecting it with PREFERRED_PROVIDER settings.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Some of the settings for KERNEL_DEVICETREE_PREFIX were missed in the
first pass. Additionally, some new dts files that were not present in
upstream are now there and can be updated in KERNEL_DEVICETREE.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The DT name k3-am62-lp-sk.dts was adopted instead of k3-am62x-lp-sk.dts
because the community prefers avoiding the wildcard letter 'x'.[1]
Drop the letter 'x' from the strings in KERNEL_DEVICETREE_PREFIX and
KERNEL_DEVICETREE to accurately reflect the DT names.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
[1]:
https://lore.kernel.org/all/06cbcd7d-bc83-bfeb-0821-72c7caf9a5e7@linaro.org/
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add and enable Jailhouse support for TI's k3-am625-sk similarly to how other
TI platforms were added and enabled in the past by adding platform-specific
configuration variables for the root cell DTB overlay, and the Linux demo inmate
DTB, configuration, and Kernel command line settings.
Migrate the jailhouse recipe to kirkstone from dunfell.
Switch to latest upstream source tree for jailhouse. The TI Jailhouse repo has
gone stale and now upstream is really the happening place where new development
happens including for new devices such as AM62x. Hence go ahead and switch to
using the upstream repo.
Update the platform-specific config files to such that the root cell DTB overlay
gets included in the file system images.
Enable additional console on ttyS3 (usually mapped to main_uart1) and ttyS2 for
the Linux demo inmate to use.
Add patches for the Jailhouse source tree for am62xx.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Only include the ti-img-rogue-umlibs-vulkan package if the
DISTRO_FEATURES x11 is enabled. Right now, this recipe has a failed
build dependency on images without x11.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Select the correct WKS file according to the MACHINE_FEATURE efi.
Right now, the sdimage-2part-efi.wks is set by default. Switch to the
sdimage-2part.wks file, if efi was removed from MACHINE_FEATURES to allow
non-efi boot methods.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Add support for additional config fragments passed via semi-standard
KERNEL_CONFIG_FRAGMENTS variable
* Also don't build all DTBs, only those specified in the machine config
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Split the firmware into it's own package so we can make the insane
checks a little more paranoid again.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Cairo can either be built for use with OpenGL or OpenGLES. By default it
assumes it can use OpenGL if X11 is provided as a distro feature. This
assumption is not true when using the proprietary SGX / Rogue drivers.
Vulkan libraries need some X libs at runtime now, so we need to manually
override the PACKAGECONFIG for cairo to use OpenGLES.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the required vulkan configuration options and the new PVR WSI file to
the corresponding package.
Also bump the PV to match the version of Mesa actually being shipped.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the source revision for the following upstream changes:
- Drop the included ICD loader. Use the Mesa/Khronos one
instead.
- Enable all vulkan window system extensions
Separate the vulkan libs into their own package so people can choose to
ignore them if they want, considering the new runtime deps.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently we move this firmware around and put it in a directories named
pdk-ipc/ and ethfw/. This does not match what is in linux-firmware which
is what projects should expect /lib/firmware to match. This causes issues
for projects that want to work both on meta-ti and also on any other distro.
Switch to shipping the same directory structure as linux-firmware here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The version information should come from the ti-linux-fw.inc and this
version is old anyway.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For TI platforms with SGX and Rogue graphics we patch upstream Mesa with
PVR support and conditionally enable features based on virtual/gpudriver
preference. This makes Mesa package platform-specific and it contains the
corresponding PACKAGE_ARCH = "${MACHINE_ARCH}" line.
In order to get greater re-use from generic non-machine-speciofic packages
down the dependency chain, such as Wayland, Weston, Qt5 modules, etc. we
need to mark mesa recipe as still providing stable OpenGL ABIs, such as
EGL, GLES, GBM, etc. - add it to SIGGEN_EXCLUDERECIPES_ABISAFE list.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Neither of recipes nor their ABI is all that stable. OpenGL might be
slightly more stable, but that is not what these provide anymore.
The variable helps with re-use of generic packages down the dependency
tree, when they depend on a machine-specific package. SGX UM used to
provide different standard OpenGL ABIs (EGL, GLES, GBM) and hence was
listed here. Now those ABIs are provided by Mesa, so SGX is removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use these to select build type and window system support to match how
the Rouge driver does the same. No functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Of the K3 family only the AM65x device is currently supported by this
driver. COMPATIBLE_MACHINE should match.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The "clean" target has been fixed along with some other issues that
caused us to need these set. Remove them now.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Small changes, the "upstream" doesn't look to be maintained anymore,
so if we get any more breaks it might be time to remove this recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The traditional order of serial consoles for K3 has ttyS2 being the
primary UART attached console. ttyS0 is also a common choice for
distros and the TI kernel may switch at some point. To prepare
we check both UARTs on all K3 devices. Move this common check
to a K3 common location.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the rogue graphics recipes to point at the new 23.1.6404501
release. This adds support for:
- kernel 6.1
- vulkan
- opencl (more testing needed)
- zink (more testing needed)
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the pvr-mesa include to use the 22.3.5 patches from
oe-core/master and the branch for DDK version 23.1 on freedesktop.
Also remove the PACKAGECONFIG options elf-tls and xvmc as those
functions were dropped by the oe-core/master version of this package and
mesa package respectively.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Locally overlay verbatim copies of mesa 22.3.5 patches from
oe-core/master, so the same codebase works in kirkstone and master.
Also drop the old patches from 22.0 that were from the tip of
oe-core/kirkstone previously.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Was used to build kernel DTBs prior to KERNEL_DEVICETREE getting populated
with the list of preset of upstream DTBs. Not needed anymore so remove.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Not sure if anyone is testing on this device with -next, but for
completeness add its defconfig.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Mainline should test the mainline kernel as it is, not with out-of-tree
changes like new DTB/DTBOs. Use only upstream DTB/DTBOs. As that was the
last thing provided by ti-upstream-tools, remove it here.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Mainline should test the mainline kernel as it is, not with out-of-tree
changes like to the default configuration that one would get when using
a stock distro. Use only upstream configuration.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Switch 32-bit beaglebone and beagle-x15 platforms to use linux-bb.org and
u-boot-bb.org recipes for simplicity and for additional Beagle-specific
features that are added on top of TI reference kernel, such as dynamic
management of capes and other OOBE enhancements.
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Add configs for BeaglePlay Cortex-A53 and Cortex-R5F cores (am62xx SoC family)
* Uses corresponding linux-bb.org and u-boot-bb.org recipes
* U-boot for now uses a separate branch for BeaglePlay
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* 5.10.162 added 2 new DT overlays
* Remove duplicate settings that are already set in SoC config
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use dedicated branch for BB-AI64 that includes recent changes for new
memory part.
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Update both 32 and 64-bit trees to 5.10.162
* Switch from using a common branch that gets periodically rebased to using
dedicated per-merge branches
* Patch 32-bit defconfig to use LZMA compression instead of LZO, that is
being deprecated in OE-Core
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
When trying to support OpenBMC, we found that our use of do_image_wic
and do_image_tar for adding depends and mcdepends was too limiting.
Moving to do_image_complete is a higher level in the tree that means
for any image type the dependencies will be correct.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
When sysvinit is in DISTRO_FEATURES, the update-rc.d class must only be
inherited when the script referenced by INITSCRIPT_NAME actually exists,
or the update-rc.d command in the generated postinst script will fail.
Reported-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are preparing to migrate our u-boot version to 2023.04. As we are still
working on the migration, mark the default preference low for this
version. We will enable building with this u-boot in a meta-arago brand
in the near future. Once the migration is complete, we will remove the
2021.01 u-boot and make this the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
We are preparing to migrate our kernel version to 6.1. As we are still
working on the migration, mark the default preference low for this
version. We will enable building with this kernel in a meta-arago brand
in the near future. Once the migration is complete, we will remove the
5.10 kernel and make this the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We often carry more dtbs/dtbos in our kernel than we have upstreamed.
The inclusion of all of the dtb/dtbo in the KERNEL_DEVICETREE has become
problematic as we start testing the linux-next and 6.1 as part of our
LTS migration. To address this issue we are adding in two step method
for managing the KERNEL_DEVICETREE.
Going forward we will only accept dtb/dtbo in KERNEL_DEVICETREE if it is
available in upstream. This way we ensure that the variable is more
accurate for whichever kernel you might be looking at. We have also
added a new variable KERNEL_DEVICETREE_PREFIX which our kernel recipes
will use to auto set KERNEL_DEVICETREE based on what files are in the
kernel and not a fixed list in the conf files.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While we are mirgrating to kernel v6.1 and u-boot v2023.04, we want to
keep kernel v5.10 and u-boot v2021.01 "working" for anyone looking at
kirkstone. One of the items we are looking at changing is the signing
of entries in the fitImage.
To try and acheive a limited parity with dunfell while we work on the
migration, this commit creates a class that implements the logic that was in
dunfell and applies that class to the 5.10 kernel.
This is a temporary patch that will be remvoed when we remove the 5.10
recipe down the road. This logic will not apply to the 6.1 kernel.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are seeing some testing issues where the new code that signs all of
the files at all times is causing issues. So rollback the logic and
only sign for platforms that support it.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are seeing some testing issues where the new code that signs all of
the files at all times is causing issues. So rollback the logic and
only sign for platforms that support it.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
After moving to the oe-core kernel-fitimage.bbclass we found that the
dtb names we were searching for did not match. This was due to the
KERNEL_DEVICETREE entries including the vendor subdir in the section
names of the fitImage file. This patch updates support in 2021 so that
we can temporarily get to a stable boot point before starting our LTS
migration and changing a lot of things in the recipes.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Doing multiple do_install:prepend overrides does not guarantee the
order - it was observed that signing could fail as it was happening
prior to symlinking to the correct name. Move signing code inside the
main do_install, so the machine-specific do_install:prepend works
correctly.
Also, pass -f flag for symlinking, otherwise it could fail with "file
already exists" error when trying to re-build the recipe again.
Several IPC list/matrix fixes:
* j721e was missing MCU_1_1_FW entry
* j721s2 was also missing MCU_1_1_FW entry
* j721s2 had a second MCU_2_0_FW in place of MCU_3_0_FW
* j784s4 was missing MCU_4_0_FW and MCU_4_1_FW entries
Other minor cleanups and indentation fixes.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports
RGMII mode.
Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the
Add-On Ethernet Card.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the MCSPI loopback overlay file for J784S4 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the MCSPI loopback overlay file for J721S2 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the MCSPI loopback overlay file for J721E EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J721E SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM69 SK has PWM output pins connected to its RPi header. Add
overlay file to enable PWM pins.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM68 SK has PWM output pins connected to its RPi headers. Add
overlay file to enable PWM pins.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the overlay files for AM69 SK:
1. Fusion board (For FPDLink-III cameras).
2. IMX390 FPDLink-III camera module that includes both the CM and
RCM type of modules.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the overlay files, over AM68 SK, for the following:
1. Fusion board (For FPDLink-III cameras).
2. IMX390 FPDLink-III camera module which includes both the CM and
RCM type of modules.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The extension for OV5640 overlay is incorrect. Therefore, update the
correct extension to build the overlay with .dtbo
Fixes: f67e9805 ("conf: machine: j721s2: Add AM68 SK specific dtb and dtbo to KERNEL_DEVICETREE")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM69 Starter Kit is a single board designed based on TI's AM69 SOC
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. Add support
for the same to include the board dtb file into the root filesystem.
Add DT overlays support for the following features on AM69 SK:
* Add DTBO entry to support OV5640 camera
* Add DTBO entry to support RPi(IMX219) camera
* Add DTBO entry for the DDR memory carveout.
[1]:https://www.ti.com/lit/zip/spruj52
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally
targeted for J7-based devices, but AM62A can re-use the existing
overlays. Both the CM and RCM type of modules are supported.
As AM62A only has one CSI-RX port, we only use 4 out of the 8 total
FPDLink ports on the fusion board.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM68 Starter Kit is a low cost, small form factor board designed for
TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance
for industrial applications. Add DTB entry for the same.
AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors.
Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout.
[1]:http://www.ti.com/lit/zip/spruj28
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the following overlay files on AM62A SK:
1. Fusion board (For FPDLink-III cameras)
2. OV2312 FPDLink camera module
3. IMX219 RPi-compatible camera module
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the basic J784S4 HS-FS configuration.
* Add configurations to support both HS-FS and GP keeping GP as default.
* Add ti-sci-firmware overrides for HS-FS.
* Remove evm conf file inclusion in hs-evm conf.
* Add j784s4 hs-evm specific config to hs-evm conf.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62A configuration
- Add machine conf for AM62A.
- The wic images will boot on AM62A HS-FS devices by default.
- The sysfw image for GP and HS-SE will be packaged in the wic image as
tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
- Sign ATF, OPTEE and RTOS Firmware.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the basic J721S2 HS-FS configuration.
- Add configurations to support both HS-FS and GP keeping GP
as default.
- Add ti-sci-firmware overrides for HS-FS.
- Remove evm conf file inclusion in hs-evm conf.
- Add j721s2 hs-evm specific config to hs-evm conf.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With the advent of using multiconfigs to build all of the versions of
the machines (gp, hs-se, hs-fs, etc...) the sysfw.itb has become a point
of contention for do_deploy. To resolve the duplicate file copy errors
from bitbake we need to uniquify the sysfw.itb file names. So, let's do
the same thing we do with the tiboot3.bin file and add the SYSFW_SUFFIX
into the name.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62x LP HS-FS configuration
- Add machine conf for AM62x LP HS-FS.
- The wic images will boot on AM62x LP HS-FS devices by default.
- The sysfw image for HS-SE will be packaged in the wic image as
tiboot3-am62x-hs-evm.bin.
- Add ti-sci-firmware overrides.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62x HS-FS configuration
- Add machine conf for AM62x HS-FS.
- The wic images will boot on AM62x HS-FS devices by default.
- The sysfw image for GP and HS-SE will be packaged in the wic image as
tiboot3-am62x-gp-evm.bin and tiboot3-am62x-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
K3 platforms include the FIT image-based kernel by default. The bootloader
loads the kernel and DTB from the FIT image. The DTB/DTBOs are added to the
FIT image but the load address is not included in the image section of
each DTB/DTBO. This load address is determined by the LOADADDRESS macros
in the kernel-fitmage class.
Hence, define the RD/DTB/DTBOs LOADADDRESS and OFFSET macros in the K3 common
include, and remove those macros defined in the K3 board specific config files.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This installs shared OPTEE-OS APIs and needs to match in order for latest
client/test/examples to be able to build.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SHA for optee_os had been of 3.20-rc1 tag instead of 3.20 tag which
had been marked stable. Change the tag to 3.20.
Fixes: 280e7b4b3a ("optee: update optee components to 3.20 tag")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OPTEE tests is not being upgraded due to a newer python dependency for
the build
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets add the basic AM62x HS-SE configuration.
- Add machine conf for AM62x HS-SE.
- The wic images will boot on AM62x GP devices by default.
- To boot on AM62x HS-SE, simply switch out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am62x-hs-evm.bin tiboot3.bin
- Add ti-sci-firmware overrides.
- Add support to sign ATF and OPTEE.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update the SHA of k3conf to pickup am62ax support
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade arm-trusted-firmare to v2.8-226-g2fcd408bb.
This upgrade picks up K3 L2 cache, snoop delayed, and EA
handling updates from upstream master.
Do not update to tip of master due to PSCI system off
support breaking AM62x and AM62q platforms.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit 98506a4a07 ("optee-os: Update SRCREV for OP-TEE TRNG in AM62X")
Disables SW PRNG => Enabling Hardware RNG. This is breaking Suspend Resume
on AM62xx EVM variants. To fix this keep using SOFTWARE_PRNG enabled as
it was.
Cc: vibhore@ti.com
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In addition to releasing the signed versions of the bl31.bin and
bl32.bin files, also release the unsigned original versions.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lower the log level for am62axx platform
commit 27641e1f2d ("optee-os: Lower log level for AM62x")
changes the log level for am62xx platforms.
This patch is to extend the same for am62axx
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reported-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
optee-os was updated to 3.19 tag but the others were still outdated.
Updates other optee components to 3.19 tag
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While removing SOFTWARE_PRNG support
commit:98506a4a07363a1b57012ccfaee263f47e5b46c4,
accidently removed the changes applied
by commit:27641e1f2d7f6696fd7bbd8f24fcac20766b6234
(optee-os: Lower log level for AM62x).
Reverting those changes back
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With a recent patch to the TI kernel that includes debug symbols,
the vmlinux.gz file grew in size that impacted the testing.
This file is not needed to be in the final image so remove it
from the list.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to the commit when trng support was
added in upstream OP-TEE for am62x platform to access rng.
Also, enable trng support as trng support is added now in OP-TEE
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Changes to support new j784s4-hs platform in:
1) ti-sci-fw_git: Update firmware prefix for j784s4-hs
2) atf: sign the image
4) optee: sign the image
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J784S4 HS platform.
Used J721S2 hs as reference.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Having signed firmware is needed for the HS platforms, but does not
cause any issues for non-HS. To keep things simple, let's deploy
both sets unconditionally. This prevents mistakes when adding HS
support and further reduces the image delta between the two types.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Firmware belongs in the nonarch lib directory. Use the right variable.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Using a table makes it easier to see what firmware is included with
each machine build. It also helps prevent errors here.
Since the same functions run across machines we now sign all the firmware
without needing to add a new signing function for each new machine.
Another fix is that we install the DM firmware to the deploy directory
for all machines that use need it. This was added for J7x machines
but missed for AM62x.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This allows us to change the name in one spot and avoid duplication.
It also helps prevent hard to see changes/typos in the firmware names.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
If we rename files in the source directory the next time we need to rebuild
the original files will be gone and build will fail. Use symlinks instead.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for AM64x and AM62x are renamed to match the other platforms,
but we don't actually change them to match. Remove baremetal from the
names.
These are only referenced to by softlink, so this change will have no
effect on Linux users.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since these TARGET defines are only used on the machine for which
an ALTERNATIVE is defined and always have the same name, these
provide nothing. Drop them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since this directory path will not change, let's avoid use
of ti-paths.inc which is set to be removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For K3 machines the SECDEV selection happens in the recipes that use it.
This assignment is therefor no longer needed. Remove it.
Suggested-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use the new ti-k3-secdev package to pull in the signing tools if they are
not provided by the environment.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use ti-k3-secdev native package to provide secure-binary-image.sh script
when it is not passed on as an environment variable. This fixes an issue
with AM64xx which is always HS but should not require TI_SECURE_DEV_PKG
when building for HS-FS or GP platforms.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use the new ti-k3-secdev package to pull in the signing tools if they are
not provided by the environment. This allows us to use these tools
unconditionally. Remove the checks for the script and do the signing
for all K3 machines. The signature is automatically stripped from
the binaries on non-HS devices at boot time as needed so this change
is harmless for GP devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use the new ti-k3-secdev package to pull in the signing tools if they are
not provided by the environment. This allows us to use these tools
unconditionally. Remove the checks for the script and do the signing
for all K3 machines. The signature is automatically stripped from
the binaries on non-HS devices at boot time as needed so this change
is harmless for GP devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use the new ti-k3-secdev package to pull in the signing tools if they are
not provided by the environment. This allows us to use these tools
unconditionally. Remove the checks for the script and do the signing
for all K3 machines. The signature is automatically stripped from
the binaries on non-HS devices at boot time as needed so this change
is harmless for GP devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The setup here is common to all packages that require signing with
the TI Security Development Tools. Add a helper class to factor out
this commonality.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While here update FW versions and remove those no longer used.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-img-rogue-umlibs package is not obeying usrmerge distro feature. /lib should be relocated to /usr. [usrmerge]
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Some machine configs didn't specify their use of screen and touchscreen
machine features correctly, fix them.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While we are working to update our platforms to support Weston 10 and
beyond, we are falling back to software rendering for platforms that do
not currently have a solution for GPU drivers (namely the boards that
use SGX).
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set SGX display controller alias variables accordingly, as SGX has a few
different aliases across platforms.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove default preferences for virtual/egl, virtual/libgles and virtual/libgbm
from machine configs to follow the new dependency chains via mesa in oder to
support accelerated and software-rendered graphics, which is selected by
virtual/gpudriver preference.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Patched mesa will now be configured based on what virtual/gpudriver
preferred provider is selected. The gpu drivers will now runtime
recommend the associated UM components.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Locally overlay verbatim copies of mesa 22.0 patches from oe-core/kirkstone,
so the same codebase works in kirkstone and master. Since upstream version
of mesa in master is now 22.3 and no longer carries these patches, but they
are still needed for 22.0-based PVR fork of mesa used with Rogue driver.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
While we are working to update our platforms to support Weston 10 and
beyond, we are falling back to software rendering for platforms that do
not currently have a solution for GPU drivers (namely the boards that
use SGX).
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Attempt to update the SGX display controller alias variable according to
what Andrew told me. SGX apparently had a few different aliases across
platforms.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove all gpu machine features and instead rely on the new dependency
chain for resolving gpu dependencies. Set preferred providers for
virtual/gpudriver where needed.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Patched mesa will now be configured based on what virtual/gpudriver
preferred provider is selected. The gpu drivers will now runtime
recommend the associated um components.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Original READMEs with bootflows were reworked and moved to a dedicated doc/
folder in more recent U-boot versions. Update links in the k3r5 config file
accordingly to provide some basic explanation of K3 bootflows.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
UIO drivers are generally frowned upon in the community, and for PRU
we now have much better alternatives in RProc, RPmsg, and PRU-Consumer.
Let's not send the wrong message by continuing to support this crufty
interface. Remove the kernel module, DTBs, and test recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
BeagleBone AI-64 (https://beagleboard.org/ai-64) uses Texas Instruments
Jacinto TDA4VM/J721e SoC. Officially BeagleBone AI-64 supports Debian
Linux and builds its BSP on top of meta-ti and TI SDK, but adds custom
DTBs and DTBO overlays, plus integrates other drivers and features.
Let's add corresponding recipes for beagleboard.org kernel and u-boot
along with the BeagleBone AI-64 machine config.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-sgx-ddk driver requires an additional userspace initialization
step after the kernel module has probed the device. Without this
initialization, no EGL context can be created and Weston etc. will fail to
start.
The driver package contains an init script, but this does not work on pure
systemd-based systems without sysvinit compat support (as provided by the
systemd-compat-units package). Introduce an enabled-by-default
PACKAGECONFIG that installs a udev rule instead to run the init command
automatically when the driver is loaded, solving the issue without
depending on a specific init system. On builds without udev, this
PACKAGECONFIG can be disabled, reverting to the old init script-based
solution.
udev reports several events when the pvrsrvkm module is loaded:
- add event for the kernel module
- add events for two DRM devices
- bind event for the GPU platform device
The DRM devices aren't nice to match on, and the kernel module add is
too early to run `pvrsrvctl --start`, so we trigger on the platform
device bind.
Tested with Weston 9.0.0 on the AM65x-based TQ-Systems MBa65xx.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These URIs have been updated in dunfell, but two instances were
forgotten in kirkstone/master.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The TI_K3_SECDEV_INSTALL_DIR is defined on the meta-ti-extras layer
so when the layer is not used the variable is undefined.
For such cases we can use default value that is the same defined
on the recipes-ti/includes/ti-paths.inc
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The TI_K3_SECDEV_INSTALL_DIR_RECIPE is defined on the meta-ti-extras layer
so when the layer is not used the variable is undefined.
For such cases we can use default value that is the same defined
on the recipes-ti/includes/ti-paths.inc
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The meta-ti-bsp layer is still broken for K3 HS platforms.
The patch [1] makes the check-layer happy again as it does not
fail any more during bitbake parsing but it will be difficult
for the end user to discover this dependency on meta-ti-extras.
On the other side, meta-ti-extras depends on meta-ti-bsp so
this is a circular dependency.
Currently the layer is broken for am62xx-evm/am64xx-evm machines:
| ERROR: Nothing PROVIDES 'ti-k3-secdev-native' (but mc:k3r5:/srv/oe/build/conf/../../layers/meta-ti/meta-ti-bsp/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb DEPENDS on or otherwise requires it). Close matches:
| libtspi-dev-native
| makedevs-native
[1] - 8e43835c ti-sci-fw: make dependency on meta-ti-extras soft
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update_data() was removed from upstream bitbake, so we should remove
the call from our code as well.
584989ed2b
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The WIC image for K3 depends on the TI-SCI firmware, on AM65x and J721e
also the bootloader. Make this clear by only depending on firmware in
the base k3.inc file, then adding the bootloader dependency in AM65x and
J721e specific includes.
Remove unneeded overrides from the evm level files.
Remove do_image_tar dependencies as the tar files do not include
the bootloader nor TI-SCI firmware, only the boot partition of
the WIC file needs these.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These defines are specific to a SoC, not a SoC family (K3) nor
any specific board. Move these to the SoC level for all boards
to be consistent with boards already doing this correctly.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This was used in the base Linaro optee-os_git.bb recipe, it is
no longer used, remove it from our boards.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
J7 is an unneeded level of grouping that is now causing issues and
leading to mistakes when adding new J7 based platforms. Each J7x
family device should use the SoC name specifically to prevent
accidentally adding or removing features that are not meant
for the new SoC.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that we have SoC names, we can avoid adding features based on the
board name. We expect folks to create their own boards based on these
SoCs, and so using the TI made EVM board name everywhere adds extra churn
when adding a new board. Plus it is more correct for most of these
features as they depend on the SoC, not on the EVM board.
One other thing we do here is to not use the generic "j7" name,
the current and future J7 devices are far to feature diverse
to group at this level. Grouping like that will lead to the wrong
things getting enabled as new J7 SoCs are added.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Like we do with J721e, J7200, and J721s2, use a SoC header include file
to define common properties. This eases adding new boards based on these
SoC.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Multi-cert is already now the default, no need to add a comment on that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These were in the meta-arago layer, but any distro should be able
to run on HS devices. So move the classes and setup to the BSP layer.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In many spots we have to use the full EVM name for each EVM using the
AM57x SoC leading to missed features on some EVMs. Add the am57xx name
so we can generically add for AM57x.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Replace "require" with "include" to load ti-paths.inc and not break
parsing when meta-ti-extras is not in the BBLAYERS list.
As ti-paths.inc is only needed to define TI_K3_SECDEV_INSTALL_DIR
for ti-k3-secdev when TI_SECURE_DEV_PKG_K3 is not set and building
for K3 HS platforms. Since ti-k3-secdev resides in meta-ti-extras,
the soft dependency will still work fine and give a build error
"Nothing PROVIDES 'ti-k3-secdev-native'" when it is needed.
Also, since TI_K3_SECDEV_INSTALL_DIR can now be undefined, use
d.getVar() to access it ensuring it doesn't break the condition.
Reported-by: Daniel Díaz <mrchapp@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Cleanup and unify again - omapl138-lcdk is the only platform supported in
the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding
settings. Adjust accordingly.
Please note, there's currently a bug building Rust on ARMv5 platforms:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Kirkstone branch of meta-arm comes with 2 versions of optee-os and
optee-client - 3.14 and 3.16. They have different dependencies and
slightly different build flows.
In our bbappends we bump SRCREV to latest version for newer platform
support and also update PV to indicate the correct version. While
bbappends are expected to be applied against newer 3.16 version of the
recipes, they use wildcard versioning and are not version-specific.
That results in bbappends applied to both versions of the recipes and
PV set to be the same, while the content is different. At this point
bitbake can pick up any version of the base recipe and if it gets
3.14 to apply the bbappend, the build fails due to that version being
too old and have different dependencies and build flows.
Making bbappends version-specific avoids the problem. Alternatively,
a whole recipe of the required newer version could be added, instead
of using bbappends.
Also, this is specific to Kirkstone, where meta-arm provides two
versions of optee - 3.14 and 3.16. In Lagdale and master only a
single 3.18 version of optee is provided.
Another hacky approach would be to not bump PV and let it be set by
the base recipe. That would avoid the build issue and keep bbappends
version-agnostic across branches, but result in incorrect versioning
of the binary packages, which might be confusing.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
CMEM has been deprecated for removal for some time now. All users should
have migrated to the Linux upstream DMA-BUF Heaps framework. Remove CMEM.
We only remove the kernel module part in this patch to prevent builds
from breaking in the meta-arago layer due to dependencies on the CMEM
library. These packages should either be updated or disabled. After
that we will remove the library.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.19.0.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the source revision for the rogue pvr kernel module.
Source changelog:
- A hack was added to increase stability on J7 platforms while we are
looking into a proper fix for cache coherency issues in this module
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3}
and the condition won't work.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Include ti-paths.inc so TI_K3_SECDEV_INSTALL_DIR_RECIPE gets defined and
artifacts are installed in the correct location.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update firmware name to wave521c_k3_codec_fw.bin to align with
linux-firmware main branch. the following patch is part of
ti-linux-firmware thru mainline sync.
commit 48407ffd ("cnm: update chips&media wave521c firmware.")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OP-TEE upstream now has support for sa3ul for j721s2 platform.
Re-enable the trng driver which was disabled earlier.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Change the OP-TEE flavour from default k3-j721e to k3-j784s4
as sa3ul support for j784s4 is upstreamed in OP-TEE and we
can use the same settings in j721s2 to access TRNG.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the new OP-TEE flavour for J784S4 instead of default k3-j721e.
The TI-SCI ID for MCU domain sa2ul/sa3ul are not the same for
J721E and J784S4. So a new flavour is added in upstream OP-TEE.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to the commit when sa3ul support was
added in upstream OP-TEE for J784S4 platform to access rng.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2.
This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt.
This didn't show up as a problem on systemd systems (eg, default) because systemd will
automatically setup a serial tty with the console option passed in on the kernel command line
(using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the graphics recipes source revision and remove the old BVNC
switch. The BVNC is now baked into the platform Makefile that is
selected with PVR_BUILD_DIR / TARGET_PRODUCT.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Notable changes include support for J784s4.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We missed a spot when updating all of the git access for git.ti.com
to use HTTPS.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.5.1 version that enables the
support for R5F on am62x SoCs.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
devtool has a long-standing bug where it cannot handle references to ${WORKDIR}
due to externalsrc:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=12677
linux-ti-mainline clones additional ti-upstream-tools repo alongside the kernel
sources into ${WORKDIR}, which exposes this devtool bug.
Work around the issue by moving ti-upstream-tools inside the kernel source tree,
i.e. inside ${S}
Reported-by: Radoslav Pesek <radoslav.pesek@microstep-mis.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The supported device types depends on the SoC, not on any specific
board or EVM. Any board can be populated with any of the 3 supported
AM64x types. Move these into the AM64x common include.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM64x devices will only be available as SR2.0 HS-FS. Set this as the
default type provided by the SDK. To allow SR2.0 HS-SE to continue to
boot, like we did with GP, we add an extra machine to build SR2.0 HS-SE
SYSFW. To use on SR2.0 HS-SE boards simply switch out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am64x_sr2-hs-evm.bin tiboot3.bin
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cdns mhdp bridge is present in j721s2 soc.
Add the dependency for the same
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Switch the DEPENDS_append expression to use d.getVar() instead of the
usual variable expansion to prevent the inline Python command from
becoming mangled.
Signed-off-by: Randolph Sapp <rs@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
During resume from low power mode suspend OP-TEE prints some messages
on the UART. It seems this UART is not powered at this point in the
sequence breaking suspend/resume. We should track down the exact
prints and quiet them. Until we get that fix upstream, lets lower
the log level for this platform to unblock the LPM work.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.18.0.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This platform is similar to the currently supported am62xx-evm, except
that we currently need new defconfigs for u-boot and new dtbs in the
filesystem.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In the latest U-Boot the HS images for AM64x have been renamed to the
default names, and the GP have been changed to *_unsigned. Remove
the overrides to pull the now default HS images.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The HS-SE AM64xx machine can now be run on GP devices and built without
needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available
in the HS-FS type going forward. Make the HS-SE the default and remove
the original GP machine.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest commit of ti-u-boot-2021.01.
As part of this U-Boot update the non-HS AM64x-evm defconfig was removed.
This is okay as building this defconfig without defining TI_SECURE_DEV_PKG
will still result in usable binaries for the non-HS devices. Use the
HS defconfig for both the HS and non-HS machines.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This machine was missed when making combined R5 boot the default.
Add this machine to fix build failure.
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In order to support fitImage image type, kernel-fitimage class is needed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
FIT Image based kernels are valid for all K3 devices, not just HS, deploy
this kernel image type by default so it doesn't have to be appended on
a per-device-type basis.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use multiconfig to generate a GP SYSFW image. This allows the HS SDK
to be used on GP boards by simply switching out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am64x-gp-evm.bin tiboot3.bin
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe deploys the raw SYSFW unconditionally which causes issues
when doing multiconfig builds. What should happen is only one deploys
these, select that the same way we select which one deploys the default
SYSFW symlink. Move the deploy step there.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The K3 TI_SECURE_DEV_PKG is the same for all devices, move this out
of each machine file and into the common K3 includes. This doesn't
have any effect on the GP machines as they make no use of it.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add SYSFW_TIBOOT3_SYMLINK and use it the same way we use SYSFW_SYMLINK
for the non-combined boot flow, to allow not setting the default for
some machine types.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Going forward, the combined tiboot3.bin is going to be the standard. Only
AM65x and J721e will still use the split boot.
Set DEPENDS and EXTRA_OEMAKE for combined boot and override only for the
two split boot platforms. This makes it easier to add new platforms and
simplifies deployment logic.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently we reuse UBOOT_* names which usually are the same we
want to give to the name of the SYSFW binary. This isn't always
correct, we should use a SYSFW specific variable in case the
UBOOT names are changed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This allows us to rebuild and re-sign the SYSFW image if needed from
the deploy directory for any SoC type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The k3-image-gen now has two new helper flags SOC_TYPE and SYSFW_DIR
that we can use to simplify this recipe. With these we do not need to do
anything different here for HS builds, the SOC_TYPE selects this now.
DL_URL also do not need cleared anymore, the k3-image-gen will no longer
download missing files when not needed for the current build type.
do_install and do_deploy can also check for the existence of either
sysfw.itb or tiboot3.bin and install/deploy as needed. k3-image-gen only
gerneates the right one now depending on the SoC. Merge all these
steps for all SoCs.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Going forward, the combined tiboot3.bin is going to be the standard. Only
AM65x and J721e will still use the split boot. Set the output of U-Boot
to be u-boot-spl.bin by default and override only for the two split boot
platforms. This makes it easier to add new platforms and simplifies
deployment logic.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Required for daily test plans. Can be enabled in local.conf or <distro>.conf:
PREFERRED_PROVIDER_virtual/kernel = "linux-ti-next"
SRCREV:pn-linux-ti-next = "${AUTOREV}"
Only uses in-tree defconfigs, does not support config fragments, builds and
packages in-tree DTBs.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest release version.
bzip2 license was added to the list, update checksum.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This makes sense but looks like was done wrong to match AM65xx which
needed the exact EVM specified due to this only working on SR2.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We already cd into DEPLOYDIR so this is not needed. This now matches the
keystone version below. Also fixes build in some odd situations.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Only the first two K3 devices do not support multi-cert boot so
lets make multi-cert the default and only add back sysfw.itb
for these two devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: lines be preserved?
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.04.01.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.04.01.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.04.01.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For the upcoming CICD flow we need to control the branch for
all of the needed packages.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This firmware is only applicable to the j721e platform and not
all j7 devices.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.04.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.04.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.04.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
devtool does not work with the current formulation of
the LOCALVERSION variables. We need to use SRCPV to
avoid AUTOREV on bleeding builds, but there will be no
+ in the string, so we cannot split on that. Just
use SRCPV directly.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With J7200 PG1.0 being deprecated, use PG2.0 sysfw when building images for j7200-hs-evm.
Also update k3-image-gen version to support this change.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update the SHA for k3conf to pickup the j721s2 fixes
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Commit bdceaa05ac added SR1.1 support for
J721e HS with the idea that the default sysfw.itb will point to SR1.1.
For that to work, the config for SR1 has to explicitly disable creating
such symlink.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The test app is not compatible with later versions of j7, so
add COMPATIBLE_MACHINE to lock these recipes down to just
j721e.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid the inclusion of device tree files that do not exist upstream
when virtual/kernel is linux-ti-mainline for the am43xx machines.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid the inclusion of device tree files that do not exist upstream
when virtual/kernel is linux-ti-mainline for the am57xx-evm MACHINE.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid the inclusion of device tree files that do not exist upstream
when virtual/kernel is linux-ti-mainline for the dra7xx-evm MACHINE.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.04.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.04.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.04.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following commits in ti-linux-5.10.y kernel has introduced a new dtb.
commit: 9b05b2a89ff ("arm64: dts: ti: Add overlay for GESI to enable main CPSW2G in J721S2")
This patch on j721s2 conf is to include the new dtb.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SA2UL driver now works on HS devices, unblock this.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The TRNG driver is not currently functional for these two platforms.
Disable the TRNG driver until fixed.
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.04.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.04.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.04.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch is to align with a recent change to how the HS platforms
are setup in the /boot partition.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.04.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.04.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.04.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.04.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
IMAGE_BOOT_FILES was being overwritten in the HS recipes leading to
incomplete binaries in /boot and the naming of the binaries were not
correct.
Fixes /boot partition for HS devices.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
[afd: Extended fix to all HS platforms]
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update the SHA of k3conf to pickup j721s2 support
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.17.
We do this to add HUK and AM64x/AM62x support.
With this we need to also switch OPTEEMACHINE for AM64x/AM62x.
To build against the latest OP-TEE the support recipes need updated also.
Move these here into meta-ti so that builds will still work when not using
meta-arago-distro.
The fix patches do not look to be needed anymore.
While here switch to git checkout with https.
NOTE: The latest OP-TEE requires SYSFW 8.04+
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For TF-A we work against upstream first, our fork has only been
used in the rare cases we need to ship a feature before we can
get it upstream. This is not currently the case so lets switch
to upstream repo until there is a need for our fork.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.04.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.04.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.04.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.04.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Sign the DM firmware for j721s2 similar to j7200 hs.
Duplicate all j721s2 entries for j721s2-hs as we cannot use same
keyword for match between j721s2-evm and j721s2-hs-evm.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J721S2 HS platform.
Used j7200 hs as reference.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.03.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.03.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.03.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.03.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following commits in ti-linux-5.10.y kernel has introduced new dtbs.
a minimal skeleton and a lpm (low-power-mode) demo dtb.
commit c161df7b1ea0 ("arm64: dts: ti: Introduce k3-am625-sk-lpmdemo")
commit 61df7fcf9307 ("arm64: dts: ti: introduce minimal dt for am625")
This patch on am62xx conf is to include the new dtbs.
Reported-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.03.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.03.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.03.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.03.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The file extension for the overlay needs to be .dtbo.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The DM firmware binary is required for building uboot binaries for
am62xx-evm using toplevel makefile in SDK. Add this file to deploy
directory so it can be included in prebuilt-images directory of SDK
for am62xx-evm.
Signed-off-by: Aparna M <a-m1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Pull in the GPU KM/UMLIBS that enable the unified 4K/64K page
firmware support in the IMG Rogue drivers.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fixes this warning:
| WARNING: dsptop-1.4.0-r2.2 do_package_qa: QA Issue: dsptop: /usr/bin/dsptop is owned by uid 1000,
| which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fixes these warnings:
| WARNING: libdce-3.00.14.00-r1 do_fetch: URL: git://git.omapzoom.org/repo/libdce.git;protocol=git
| does not set any branch parameter. The future default branch used by tools and repositories
| is uncertain and we will therefore soon require this is set in all git urls.
| WARNING: libdce-3.00.14.00-r1 do_unpack: URL: git://git.omapzoom.org/repo/libdce.git;protocol=git
| does not set any branch parameter. The future default branch used by tools and repositories
| is uncertain and we will therefore soon require this is set in all git urls.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.03.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.03.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.03.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update build flag for arm-trusted-firmware to include low power mode
support
K3_PM_SYSTEM_SUSPEND is added in arm-trusted-firmware now which enables
low power mode support for am62xx.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
upgrade arm-trusted-firmare to master which is currently v2.6+
This upgrade picks up am62x low power mode feature.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This firmware stub is required by the TI foundational security
software while transitioning to low power mode.
Add a recipe for this compatible with am62xx-evm
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As append override does not add any whitespaces, it could lead to potential
issues when two items in space-separated list get concatenated. It is always
recommended to add a leading whitespace in such cases, like EXTRA_OEMAKE.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
FILES:${PN} is being assigned twice, remove duplicate.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
meta-ti does not provide official X.org support, so no reason to set any
defaults, just assume the ones from OE-Core.
Also, drop setting MACHINE_GUI_CLASS, which is now only used by the kernel
from meta-openembedded to determine the size of the Tux during boot. Keep
those for now in community Beagle machines.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use weak assignment for default PREFERRED_PROVIDER values to allow user to
easily overwrite them from local.conf.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Specify default 3D GLES/EGL providers for platforms using SGX and Rogue GPUs,
both kernel and user-space components.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In most cases machine features should be set in the corresponding SoC config
to be applicable to different machine variants, like GP, HS or custom board.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The module can not be compiled without patching kernel 5.10
This helps meta-ti to live in multi-BSP envs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
meta-arm commit e03b824d7824 ("arm/optee-os: cleanup recipe") changed the
recipe's do_compile(), which broke the build of the am57xx-hs-evm and
dra7xx-hs-evm machines. Adjust the .bbappend accordingly.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Point to an updated SRCREV that fixes a compile error with the clang
compiler.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
ERROR: cmem-mod-4.20.00.01+gitAUTOINC+86269258a4-0a do_package: QA Issue: cmem-mod: Files/directories were installed but not shipped in any package:
/lib/modules/5.10.100-g4a12bec7d3/extra/cmemk.ko
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Explicitly cast the value into correct type to fix this error:
| .../services/server/devices/rogue/rgxinit.c:1345:36: error: implicit conversion from 'enum <anonymous>' to 'IMG_BOOL' {aka 'enum tag_img_bool'} [-Werror=enum-conversion]
| 1345 | bEnableAPM = false;
| | ^
Cc: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.03.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.03.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.03.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.03.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the k3conf to the latest SHA.
This adds AM62x support.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add missing k3-am625-sk-csi2-ov5640.dtb required for the camera overlay.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.4.1 version that enables the
support for AM62x SoC family remote processors.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.03.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.03.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.03.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This commit adds the PRU Software Support Package (PSSP) to the AM62x Linux
Processor SDK under example-applications/pru-icss-x.x.x. It also adds prebuilt
PRU firmware to the default AM62x filesystem image under the /lib/firmware
folder.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SDK folder example-applications/pru-icss-x.x.x to install the latest
version of the PRU Software Support Package (PSSP).
This also uses PSSP v6.1.0 to generate the PRU Halt and RPMsg binaries in the
Linux SDK default filesystem image under /lib/firmware.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Enable the GPU for am62xx and j721s2 and use IMG DDK 1.15
Migrate Imagination DDK 1.13 to DDK 1.15 for J721e
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.006
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
ti-sgx-ddk-um's do_install creates a symlink libGLESv2.so.1 to
libGLESv2.so. As this symlink will be installed to ti-sgx-ddk-um, but
its target libGLESv2.so is in ti-sgx-ddk-um-dev, the automated
dependency analysis will add ti-sgx-ddk-um-dev to ti-sgx-ddk-um's
RDEPENDS. This will pull in a large number of other -dev packages
through RDEPENDS and RRECOMMENDS in turn.
Avoid this by having libGLESv2.so.1 point to libGLESv2.so.2 instead of
libGLESv2.so, so the symlink's target is in ti-sgx-ddk-um as well.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
To allow a consistent experience across current devices, enable wic.bmap file
generation for AM3/4/5 images.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
bitbake git fetcher warns about protocol and fall back branches
therefore be explicit about these parameters in source uri
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM65xx is the only member of the K3 family with an SGX GPU.
Be specific here to avoid confusion.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are now three SoCs in the J7 family, but only the j721e variant
is currently supported. Be specific here.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This allows us to be more specific around what SoCs we support and
lets us add features based on the SoC family not just at the EVM or
whole J7family level.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In many places we use "j7" the family when we should be using a
specific SoC or EVM and vice-versa. For instance when including
graphics drivers we add for all "j7" family, but what we really
want is only for some specific j7 SoC.
First step in untangling this is to make it clear that there is
no SoC called j7. There is a SoC called j721e with a j721e-evm.
Fix up this naming here.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add README for the newly added meta-ti-extras layer and update the maintainer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The VIP camera capture driver recently ported to ti-linux-5.10.y adds
a DT overlay for the OV10635 camera sensor. Add this to
KERNEL_DEVICTREE so it's added to the artifacts.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We need to control both the source name of the firmware and
the target name, so split the current variable into two and
update the install command.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.001
- Changed CORESDK_RTOS_VERSION version to 08.02.00.04
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.4.0 version that enables the
support for j721s2 SoC family remote processors.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are now using binman to generate the images for
K3 AM64 in u-boot.
tools/binman/binman needs python3-setuptools so add it to
DEPENDS.
Reported-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The original recipe listed the compatible platforms to
all of j7, but at this time it is limited to j721s2-evm.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d29025f7e8.
* associated fix in k3-image-gen is picked up now.
commit 892c86501ff7 ("Makefile: Skip signing of binaries for HS combined boot")
hence its no longer needed to carry the same fix from meta-ti here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update ti-linux-firmware and k3-image-gen to
pick latest TIFS and DM v2022.01
This version also adds support to j721s2
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the name of the firmware for j721s2 as the file
was renamed. Also, fix a typo in the variable name.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets fix the missing switch firmware binary to point to ping binary
instead. If we attempt to start alternate CPU, we get a very beserk
system.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add firmware recipe to add the Wave521cl firmware pieces in for j7
platform.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Dont forget the alternate-target as well.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets keep ethernet switch firmware disabled till we can actually
integrate it.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets enumerate the C7x target instead of defaulting as a since C7x.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same. Since the
option provided is custom to TI K3, make this a k3 product override
capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same.
Since the option provided is custom to TI K3, make this a k3 product
override capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Firmware images should always be installed under /lib and hence should use
nonarch_base_libdir, as regular base_libdir is configuration-specific and
doesn't always resolve to /lib.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
base_libdir is not configuration safe while firmware binaries
should always be deployed to /lib. In configurations where
base_libdir is not /lib the firmware gets deployed to wrong
paths.
This is fixed by using the nonarch_base_libdir which is
configuration agnostic.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM335x SoC has a built-in 16bit/24bit RGB LCD controller, and
the BeagleBone Black uses an external chip to convert this to HDMI.
But the SoC does not have a video output port per-se, thus the "screen"
machine feature does not belong to its configuration but rather to
the machine configurations.
Move the feature (and the MACHINE_GUI_CLASS definition) out of
ti33x.inc into am335x-evm.conf and beaglebone.conf respectively.
At the same time, drop the irrelevant comments regarding the external
screen, since MACHINE_GUI_CLASS is unlikely used and the BeagleBone
Black has a micro HDMI port, not a DVI port.
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Require kernel image and device tree as machine-specific packages with
MACHINE_ESSENTIAL_EXTRA_RDEPENDS instead of appending IMAGE_INSTALL.
This binds the packages to the packagegroup-core-boot package group,
allowing one to skip their installation, e.g. for container trees.
This patch reflects commit d4cbe0e43393 [1] from meta-yocto-bsp
("beaglebone-yocto: move kernel and dtb to packagegroup-core-boot").
[1] https://git.yoctoproject.org/meta-yocto/commit/?id=d4cbe0e43393ec70e98caf006372b5311597d377
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move TI Unified Instrumentation Architecture in C (cUIA) to meta-ti-extras under
recipes-devtools.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Some .inc file now span across layers, so use fuller path to find them when
including.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Those were moved from meta-ti-bsp and used by CodeGen Tools.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Legacy platforms AM3/4/5/J6 build components for multimedia acceleration and
other DSP showcasing using SYS/BIOS, XDC, XDAIS, CodeGen Tools and different
DSP libraries. Move all of them to meta-ti-extras.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
bitbake now requires it, as default master is no longer deterministic.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
bitbake now requires it, as default master is no longer deterministic.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move WiLink WiFi and BT components from meta-ti-bsp to meta-ti-extras layer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Extra sub-layers will be created next and relevant content moved across them.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
After 8b2c97b585, new platforms were merged with
BUILD_DIR used as in early Dunfell days, correct those.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Newer versions of baremetal GCC toolchain available from meta-arm-toolchain.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
DSP/BIOS was the name for older versions of TI-RTOS, prior to SYS/BIOS and
used on older deprecated platforms. Remove any remnants.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Newer versions of Linux kernel selftests are available from meta-oe.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
It's not BSP core functionality and newer version is available from meta-oe.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Cleanup remaining recipes that are used by other platforms from any machine
overrides that still refer to deprecated Keystone1/2 platforms.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove deprecated support for compiling Keystone1/2 RTOS components and
Linux firmwares using PDK, CSL, etc.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Low Level Drivers (LLDs) were used by Keystone1/2 to access peripherals by
RTOS and Linux. Remove due to deprecation.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As beagleboard is now deprecated and removed from future meta-ti releases.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OMAP3 platforms used OCF-Linux, a Linux port of the OpenBSD/FreeBSD
Cryptographic Framework (OCF) for Crypto HW acceleration. Later, an
alternative Cryptodev-linux API standard became dominant for newer
platforms. Remove deprecated module.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Linux Utils were used mainly by DMAI on deprecated DaVinci and OMAP3
platforms.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Was used with deprecated DaVinci, OMAP-L1 and OMAP3 families of platforms.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
X-Loader was originally used on OMAP3/4 platforms, but eventually got
replaced by U-boot SPL.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Those platforms are being deprecated and not supported in future meta-ti releases.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Both of the local patches were merged upstream, so update the reecipe to pull
the latest SRCREV and drop those patches from the OE metadata.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Cc: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since corresponding functionality and FW only available on J7.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit ba0ddc5ae9 ("conf: am437xx-evm: Remove non-existent dtb* from
5.10") removed all non-existent dtb* for am437xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following HDMI DTBs.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
The required dts have been added to the 5.10LTS by these two following
commits:
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am437x-gp-evm-hdmi.dts?h=ti-linux-5.10.y&id=25434078d3f93d1346af5
e52e0f150f9083321d8
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am43x-epos-evm-hdmi.dts?h=ti-linux-5.10.y&id=c5114144b568e470a8f6
e613f7c6e8b88ad19d7e
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This adds a patch to fix runtime problems loading the kernel module with
kernel 5.10
Adds support to build with musl targets
Add yoe to recognised OE distributions
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d5db414172.
We should'nt have to carry patches for u-boot or kernel, since the
upstream is now fixed since 5.14 kernel and u-boot 2021.10 tag onwards,
lets revert the patch to allow upstream to work with 5.15+ kernel and
2021.10 u-boot (from the already applied commit cae609388f
"recipes-bsp: u-boot-ti-mainline: Update to v2021.10 release").
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This adds up numerous fixes for various k3 platforms.
While at it, bump the ti-upstream-tools repo as this sync up gives us:
config: audio_display: Update cdns-mhdp configs
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
SA2UL GP driver will not work for HS. Need SA2UL HS driver.
Till it is implemented blacklist sa2ul for am64xx hs and j7200 hs
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This is temporary fix for combined boot images for KIG in meta-ti till
the patch is integrated.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump linux and rt-linux version to 08.01.00.006
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The application expects the pvdec_full_bin.fw to be in /lib/fimware
directory.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Found a bug in the PRU_ICSSG examples in PSSP v6.0.0, fixed in v6.0.1.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This got accidentally merged from Dunfell with the old syntax, fix it.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch adds support for J721e HS SR1.1
HS SR1.1 requires updated sysfw binary. Both SR1.0 and SR1.1 sysfw
binary will be generated. sysfw.itb will point to SR1.1
This patch requires J7 SR 1.1 support in K3 Image gen.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We cannot use j7200 keyword for match b'n j7200-evm and j7200-hs-evm due
to existing j7 keyword, we need to duplicate all the j7200 entries for hs.
Also sign the DM firmware for J7200 similar to J7 HS
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J7200 HS platform.
Used am64xx hs and j721e hs as reference.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Added missing dtbo k3-am654-evm-ov5640.dtbo required for system test
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add missing k3-am642-evm-nand.dtbo required for system test
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Added support to build combined boot image for hs build.
This required k3 image gen patch that is already merged.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add new am64x hs platform. This requires two files to be created.
Used am65x and j7 hs platform for reference.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch brings k3 image gen under bleeding for nightly builds
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This introduces a critical fix for both AM335X EVM and AM43XX EVM, which
can no longer boot because "uuid" is undefined.
v2021.10 has these two fixes, one for each platform:
- commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only")
- commit e0c91ae24e5b ("ti: am43xx_evm: Switch to DISTRO_BOOT only")
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update k3 image gen to latest.
Bump linux firmware to v2021.09a
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump linux rt version for 08.01.00.002 release
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump linux version for 08.01.00.002 release
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
this is undefined behaviour, mant times devs used them together to get
the missing space at the beginning of string which append/prepend needs
but thats not intended behaviour
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
AM64x SoCs have a Cortex-M4F core in MCU domain. This core is used a
standalone device for safety applications. For non safety applications,
the device is exposed as a remote processor with Linux rpmsg framework.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
To merge j7 dtb name change patch need to bump the linux and linux rt
before the point release
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
To merge the dtb file name change patch in meta-ti for j7 need to bump
linux version
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
PRU Software Support Package (PSSP) v6.0.0 should be included in Linux Processor
SDK 8.1 for AM335x, AM437x, AM57x (if generated), AM64x, AM65x under
example-applications. For the release notes that come with v6.0.0, see
https://git.ti.com/cgit/pru-software-support-package/pru-software-support-package/tag/?h=v6.0.0
Linux Processor SDK 8.1 will be the first AM64x SDK release to include the PSSP.
PRU firmware will also be generated and placed in the default filesystem under
lib/firmware/pru.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Change to support common INC for all firmware
This will help with:
1) Eliminating requirement to change multiple recipes for firmware
update
2) This will help support AUTOREV
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update the ti-rpmsg-char library to 0.3.1 version that enables the
support for the M4F remote processor on AM64x SoCs.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
The uboot extlinux is using kernel device tree variable to populate the
dtb files. The error occurs if the device tree files are in ti folder
since there is no ti folder in deploy directory. Fix the kernel device
tree path before using in the uboot extlinux.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
To make use of the "generic distro boot" support in U-Boot, an
extlinux.conf file needs to be generated and reside in the extlinux
directory. The extlinux.conf file will be parsed by U-Boot and the
"append" line will be evaluated and expanded and used entirely as the
bootargs passed to the kernel. Our generated extlinux.conf states
that the kernel image and device trees live one level up (so the root
directory) from it, so populate that location with our kernel and device
trees.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
All of our platforms here support running EFI binaries. We can have wic
generate a simple grub.cfg file for us that will find the root partition
via PARTUUID and utilize the device tree that is already discoverable
via the EFI configuration tables. Assuming the EFI loader is U-Boot,
this device tree can be replaced at run-time by the normal mechanism of
loading in to memory and passing that address as an argument to bootefi.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
https://www.freedesktop.org/wiki/Software/systemd/TheCaseForTheUsrMerge/
When "usrmerge" distro feature is enabled, root directories /bin, /sbin, /lib
are simply symlinks pointing to their counterparts in /usr. Hence, modules
should be installed accordingly into /usr/lib/modules/...
Since IMG Makefiles don't take the direct target directory, such as
${nonarch_base_libdir}/modules/, adjust the top-level rootfs path instead.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reported-by: Vivien Didelot <vdidelot@pbsc.com>
Tested-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Upcoming "honister" release changes the override syntax to improve usability,
speed and memory footprint. Update recipes with the new syntax and set layer
compatibility to honister.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Tested-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Build is failing for ti-rtos-firmware when ARAGO_BRAND = "mainline"
with below error:
"ERROR: ti-rtos-firmware-08.00.00.32-r0.0 do_fetch: Fetcher failure:
Unable to find file file://0001-Revert-soc-am64x-Makefile-Move-the-
SPL-Load-address-.patch;patchdir=../imggen anywhere."
This is because the mentioned patch is not present in the current path.
Fix this by updating the path to include ti-sci-fw
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Changes for firmware update( eff643e5 ti-rtos-firmware: update the
source to ti-linux-firmware) were in-complete without soft link.
1) Added soft link missing for the rtos firmware.
2) Updated the IPC am64x firmware name to be consistent with 7.3
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
These are the complete changes in the patch
1) Updated the firmware to fix IPC load issue due to resource_table
placement
2) Added the INC_PR
3) Updated the RTOS version
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update AM65x SR2.0 prueth firmware to 02.02.09.03 that adds support for
100M HD mode.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This is temporary change to pick the 08.00.00.026 firmware from
ti-linux-firmware repos:
1) Using the ti-sci-fw to pick the latest firmware and support AUTOREV
in future
2) Kept the destination folder name same to avoid wide-spead changes to
other recipes. Since that will be changed as part of over-all clean-up
TODO:
1) Re-structure rtos firmware repo and update all dependent firmware recipes.
2) Fix the destination folder name to match src folder
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
There was a discrepancy between master and dunfell where 2 different versions
of the same patch existed, so when syncing branches, it resulted in appying
the same change twice. This cleans it up.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
The beagleboneai is not loading the MLO without this change.
A similar change was needed in meta-yocto-bsp for the beaglebone black
due to the updating of dosfstools to 4.2 in Hardknott.
[Yocto #14306]
(See also meta-yocto rev: 0c679ac53b52e631a7c961872ce58f5cf74b8629)
Signed-off-by: Theodore A. Roth <troth@openavr.org>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update u-boot recipe to be on the latest official upstream tag.
This introduces initial support for AM64x which works with v5.13
kernel tag.
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display,
GPU, dedicated safety island and security accelerators.
J721E EAIK supports the following interfaces:
* 4 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.0 Type-C port
* x3 USB 3.0 Type-A ports
* x1 PCIe M.2 E Key
* x1 PCIe M.2 M Key
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi compatible GPIO header
J721e EVM and EAIK uses the unified bootloader. Add j721e eaik dtb
for machine=j721e-evm
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
And lets work with the latest kernel and while at it bump the system up
to latest ti-upstream-tools repo to get:
* AM65x SR1.0 overlay support
* EFI configuration to allow for the eventual support
* Few more cleanups for new architectures that have popped in.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Commit 02a2433c ("ti-sci-fw: Update image gen to latest") switched to a
newer commit in k3-image-gen that also picked up TISCI firmware release,
However, does include a change where the SPL address changed.
This switch in address has been queued for upstream in a future release
(v5.14 + u-boot 2021.10) and current mainline formal tags do not support
this address change. As a result, we have a broken AM64x mainline
support.
Revert this specific change from k3-image-gen for mainline alone for
now.
NOTE: This uses ARAGO_BRAND=mainline which is NOT accurate for meta-ti
which is distro independent, hence without appropriate changes while
using alternate distros, this change will not take effect.
Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Just updating imggen to a configuration compatible with latest firmware
should not have been accepted, we should have ensured that firmware
commit has moved correspondingly as well. Fix the same, else we get a
broken system.
Fixes: 406f599822 ("ti-sci-fw: Update imggen to release 08.00.00.001 tag")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms. So the ivshmem
(inter VM shared memory) based UIO driver and test applications
cannot be build and are not required.
Remove the recipes for the same.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms, remove the
recipe and corresponding patches.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk build,
due to inconsistency of PDK releases vs Linux SDK releases vs different
SoCs.
Update to FW version: REL.CORESDK.08.00.00.20
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following display overlays.
- k3-am654-evm-tc358876.dtbo
- k3-am654-evm-oldi-lcd1evm.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This patch adds overlay to support icssg1-dualemac
ie: 1 x CPSW3g ports and 2 x ICSSG1 ports configuration
overlay: k3-am642-evm-icssg1-dualemac.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Add prebuilt PRU Ethernet FW for am64xx-evm which is the same as
for AM65x SR2.0.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces k3-j721e-common-proc-board-infotainment.dtbo overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Added KERNEL_DTB_OVERLAY_SUPPORT to common ti-soc include. This fixes the issue
where the dtbs are build without symbols causing issue with overlays.
Please note this increases the size of the dtb for all platform
derived from ti-soc. So for custom boards disable it from local.conf to
reduce size.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
U-boot build process requires DM firmware to be signed for J7 HS.
It's better for ti-rtos-firmware package (that delivers DM firmware) to sign
it once and provide signed version to other packages, instead of U-boot needing
to re-sign it during build in staging location.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
With U-Boot supporting both am64xx-evm and am64xx-sk with single
defconfig, there is not need for a new machine for am64xx-sk.
So, drop support for am64xx-sk machine.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
As a step towards unification for am64xx-evm and am64xx-sk,
start including am64xx-sk dtb for machine=am64xx-evm.
Once U-Boot merges support for unified bootloader, am64xx-sk
machine can be dropped.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Update u-boot recipe to be on the bleeding upstream tag.
While at it, also update the u-boot source url to point to the new
server as per [1].
While it may be redundant, lets document the usage of URI and
PROTOCOL for those, who (cough), may get tripped otherwise.
[1] a3bbd0b912
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
ReIntroduce AM65x SR1.0 Overlay as the support for it
is added in the ti-linux-5.10.y kernel now.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces overlays present current on ti-linux-5.10.y kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The update brings the fix for 5.10.x linux kernel.
commit c0039f1fec25 ("cmemk: Fix 5.10 build errors for non Keystone2 platforms")
commit 8aba20e20bf7 ("cmemk: Fix build errors for 5.10+ kernels")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit 816485e68430 ("Merge pull request #1 in DBG/dsptop from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit dd0c82fb5763 ("Merge pull request #1 in DBG/gdbc6x from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- dra7-evm-lcd-osd101t2045.dtb
- dra7-evm-lcd-osd101t2587.dtb
- dra71-evm-nand.dtb
- dra71-evm-lcd-auo-g101evn01.0.dtb
- dra72-evm-lcd-osd101t2045.dtb
- dra72-evm-lcd-osd101t2587.dtb
- dra72-evm-revc-lcd-osd101t2045.dtb
- dra72-evm-revc-lcd-osd101t2587.dtb
- dra76-evm-tfp410.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am57xx-evm-cam-ov10635.dtb
- am57xx-evm-reva3-cam-ov10635.dtb
- am571x-idk-lcd-osd101t2045.dtb
- am571x-idk-lcd-osd101t2587.dtb
- am572x-idk-lcd-osd101t2045.dtb
- am572x-idk-lcd-osd101t2587.dtb
- am574x-idk-lcd-osd101t2587.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am335x-icev2-prueth.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb, as they are not currently present on
ti-linux-5.10.y.
- keystone-k2g-evm-lcd.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove jailhouse overlay as it is not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The following dtb/o are not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
- ti/k3-j721e-proc-board-tps65917.dtb
- ti/k3-j721e-common-proc-board-infotainment.dtbo
- ti/k3-j721e-pcie-backplane.dtbo
- ti/k3-j721e-common-proc-board-jailhouse.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The eglplatform.h header is updated to account for deprecation of
MESA_EGL_NO_X11_HEADERS macro. Update srcrev to pick this change.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
The additional patch for ti-sgx-ddk-km remaps the arm-oe-linux-gnueabi prefix
to the arm-linux-gnueabihf preferred target. Same should be done for the
arm-poky-linux-gnueabi prefix.
Signed-off-by: Zan Dobersek <zan@falconsigh.net>
Reviewed-by: Gowtham Tammana <g-tammana@ti.com>
It appears common-csl-ip-rtos does not require ti-sysbios dependency to build,
but ti-pdk.bbclass adds it by default. While most of PDK-based components do
require ti-sysbios to be built from sources, it is safe to remove it from CSL,
reducing the dependency tree for special cases like PRU FW based on CSL, but
not needing ti-sysbios.
This only affects firmwares built from sources against PDK and CSL, not when
RTOS firmwares are delivered in binary form for newer K3 platforms.
Build-tested on am335x, am57xx, k2g and am65xx.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Fixes:
ERROR: cuia-1.0.0.13-r0 do_package: QA Issue: cuia: Files/directories were installed but not shipped in any package:
/usr/lib/gnu.targets.arm.rtsv5T.av5T
/usr/lib/syscalls.am3g
/usr/lib/gnu.targets.codesourcery.rtsv5T.a470MV
/usr/lib/syscalls.am4g
/usr/lib/gnu.targets.codesourcery.rtsv6.av6
/usr/lib/gnu.targets.arm.rtsv7A.av7A
/usr/lib/syscalls.am4fg
/usr/lib/gnu.targets.arm.rtsv7M.am4fg
/usr/lib/gnu.targets.arm.rtsv7M.am4g
/usr/lib/boot.am3g
/usr/lib/gnu.targets.arm.rtsv7M.am3g
/usr/lib/gnu.targets.arm.rtsv6.av6
/usr/lib/boot.am4fg
/usr/lib/boot.am4g
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
cuia: 14 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
It is a pre-built binary, hence no control over passing correct LDFLAGS.
This used to be a warning and recently became an error. Fixes:
ERROR: vis-01.50.07.15-r1 do_package_qa: QA Issue: File /usr/bin/RadioApp in package vis doesn't have GNU_HASH (didn't pass LDFLAGS?) [ldflags]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Workaround for these:
.../ti/drv/cppi/test/k2h/armv7/linux/fw_main.c:50: multiple definition of `coreNum';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/src/cppi_test.c:102: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_main.c:50: multiple definition of `errorCount';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/src/cppi_test.c:102: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:85: multiple definition of `fw_passCfgVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:85: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:84: multiple definition of `fw_srioCfgVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:84: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:83: multiple definition of `fw_qmssDataVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:83: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:82: multiple definition of `fw_qmssCfgVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:82: first defined here
Needs to be fixed properly later:
https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Workaround for these:
qmss/mpm_transport_qmss_interface.so:(.bss+0x0): multiple definition of `fw_qmssCfgVaddr'; mpm_transport.so:(.bss+0x0): first defined here
qmss/mpm_transport_qmss_interface.so:(.bss+0x4): multiple definition of `fw_qmssDataVaddr'; mpm_transport.so:(.bss+0x4): first defined here
qmss/mpm_transport_qmss_interface.so:(.bss+0x8): multiple definition of `fw_srioCfgVaddr'; mpm_transport.so:(.bss+0x8): first defined here
qmss/mpm_transport_qmss_interface.so:(.bss+0xc): multiple definition of `fw_srioSerdesCfgVaddr'; mpm_transport.so:(.bss+0xc): first defined here
qmss/mpm_transport_qmss.so:(.bss+0x0): multiple definition of `fw_qmssCfgVaddr'; mpm_transport.so:(.bss+0x0): first defined here
qmss/mpm_transport_qmss.so:(.bss+0x4): multiple definition of `fw_qmssDataVaddr'; mpm_transport.so:(.bss+0x4): first defined here
qmss/mpm_transport_qmss.so:(.bss+0x8): multiple definition of `fw_srioCfgVaddr'; mpm_transport.so:(.bss+0x8): first defined here
qmss/mpm_transport_qmss.so:(.bss+0xc): multiple definition of `fw_srioSerdesCfgVaddr'; mpm_transport.so:(.bss+0xc): first defined here
qmss/mpm_transport_qmss_osal.so:(.bss+0x0): multiple definition of `fw_qmssCfgVaddr'; mpm_transport.so:(.bss+0x0): first defined here
qmss/mpm_transport_qmss_osal.so:(.bss+0x4): multiple definition of `fw_qmssDataVaddr'; mpm_transport.so:(.bss+0x4): first defined here
qmss/mpm_transport_qmss_osal.so:(.bss+0x8): multiple definition of `fw_srioCfgVaddr'; mpm_transport.so:(.bss+0x8): first defined here
qmss/mpm_transport_qmss_osal.so:(.bss+0xc): multiple definition of `fw_srioSerdesCfgVaddr'; mpm_transport.so:(.bss+0xc): first defined here
Needs to be fixed properly later:
https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Workaround for the following gcc10 errors:
.../gdbc6x/gdb/varobj.h:221: multiple definition of `ada_varobj_ops'; mi-cmd-var.o:.../gdbc6x/gdb/./varobj.h:221: first defined here
.../gdbc6x/gdb/varobj.h:220: multiple definition of `java_varobj_ops'; mi-cmd-var.o:.../gdbc6x/gdb/./varobj.h:220: first defined here
.../gdbc6x/gdb/varobj.h:219: multiple definition of `cplus_varobj_ops'; mi-cmd-var.o:.../gdbc6x/gdb/./varobj.h:219: first defined here
.../gdbc6x/gdb/varobj.h:218: multiple definition of `c_varobj_ops'; mi-cmd-var.o:.../gdbc6x/gdb/./varobj.h:218: first defined here
Needs to be resolved properly in the code later:
https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Workaround for this gcc10 error:
.../linux/src/api/gates/GateHWSpinlock.c:96: multiple definition of `_GateHWSpinlock_cfgParams';
.libs/Ipc.o:.../linux/src/api/Ipc.c:97: first defined here
Needs to be resolved properly in the code:
https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Cc: Suman Anna <s-anna@ti.com>
It was giving this warning for years, finally gone:
| warning: `sys_errlist' is deprecated; use `strerror' or `strerror_r' instead
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Cc: Suman Anna <s-anna@ti.com>
update am64x rtos firmware to keep pinmux and control MMRs
remain unlocked now since linux needs this to be unlock.
this fix the USB and performance degradation issues.
am64xx: 07.03.00.19
Signed-off-by: Shiju Sivasankaran <shiju@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
IMAGE type and dependencies can easily be centralized to SoC include
file. This is necessary to make sure that we don't do the duplication
and having multiple places to fix up.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
wic and tar dependency on trusted firmware is wrong. It is u-boot build
that depends on trusted firmware deployment and is correctly handled by
u-boot recipe. No point in duplicating that dependency, so just clean it
all up.
Reported-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Lets keep things consistent by providing two possibilities for platforms
to pick from - legacy boot and multi-certificate boot.
In legacy boot, the base bootloader and system firmware are
maintained as separate binaries (tiboot3.bin and sysfw.itb).
In multi-certificate boot that newer K3 devices support, ROM is smarter
and can handle multiple x509 certificate based images: so we can strip
out the sysfw.itb and integrate it as part of tiboot3.bin itself. This
improves authentication and overall system boot times since we are now
able to boot both the system controller and the boot processor in
parallel.
We do have a scheme currently to identify the images necessary for boot
etc, but things are handled on a platform conf file basis. We can
improve that by introducing the pattern at the top level include and use
the relevant pattern in platforms as needed.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Remove duplicate machine-specific redefines of UBOOT_BINARY, UBOOT_IMAGE and
UBOOT_SYMLINK variables, as they are already defined with same values in the
common k3r5.inc file.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Fixes:
.../scripts/secure-binary-image.sh: line 69: openssl: command not found
.../scripts/secure-binary-image.sh: line 78: openssl: command not found
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
OPTEEMACHINE name as defined in the optee_os project [1] for
j721e is k3-j721e.
This patch fixes the name to correct target.
[1]: 87613cf952
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
ti-upstream-tools[1] repository carries the overlays and defconfig
fragments that we don't wish to overload upstream kernel community with.
The reason for that being these are constantly on churn as our test
coverage increases etc. Currently we reuse the "BRANCH" variable to also
matchup with kernel and ti-upstream-tools repositories as well.
This can tend to be a little painful if we decide to start testing
various kernel configurations - RT etc.. So, lets just split out the
TOOLS_BRANCH separated from the branch we use for kernel. Even though
the branch remains the exact same at this point.
[1] https://git.ti.com/cgit/ti-linux-kernel/ti-upstream-tools/
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Add GNU Multiple Precision Arithmetic Library as a dependency for
mainline linux builds. These are necesary for kernel to handle gcc
plugins for builtins.h
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
The J7200/AM64 ti-sci-fw needs to be installed in the deploy
directory so that it can be packaged in Processor SDK bundle
This is required because the ti-sci-fw is needed in the
installer prebuilt-images in order to build the combined boot
image for J7200/AM64
Signed-off-by: Lucas Weaver <l-weaver@ti.com>
update ti-rtos-metadata and ti-rtos-firmware recipes of meta-ti to
pick AM64x rtos firmware from mcu-plus-sdk instead of PDK.
Other devices such as AM65x, J7 continue to use fw from PDK.
Built and tested both IPC echo test applications - "rpmsg_client_sample”
& “rpmsg_char_simple”. Both tests passed for all remote R5F cores
on AM64x EVM
Signed-off-by: Shiju Sivasankaran <shiju@ti.com>
[praneeth@ti.com: rebase to dunfell/next]
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Boards like the beaglebone currently hardcode "u-boot" as a dependency
for the image and the wic format, and this prevents one from choosing
a different bootloader via:
PREFERRED_PROVIDER_virtual/bootloader = "non-u-boot-bootloader"
Depending on "virtual/bootloader" instead of "u-boot" fixes this.
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Between j7200 firmware tags 07.03.00.10 to 07.03.00.16
the downloadable weburl link changed
from *processor-sdk-rtos-jacinto7 to *processor-sdk-rtos-j7200.
This patch is to fix the recipe to pick the firmware from the
expected location on the new tag.
Fixes j7200 build error reported due to
77cdfa9f65 ("ti-rtos: Update metadata and versions for RTOS firmware")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
And lets work with the latest kernel
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Bump up our recipe version for ti-upstream-tools for updates in config
files needed for latest kernel
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2021.01 sysfw and the applicable
DM update with following version
* 07.03.00.12 for J721E
* 07.03.00.10 for J7200
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Add combined boot flow support for the AM64XX SK device.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
AM642 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM642 SoC. Add machine definition for SK board.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Update SRCREV to latest commit that includes AM64xx SK platform
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Latest versions of Linux kernel (5.10) and U-boot (2021.01) are not yet ready
for prime time in meta-ti and some features are still being migrated and causing
issues. The recipes are meant for development and not yet for production.
Normally selection of the version is done with PREFERRED_VERSION by the Distro
(e.g. Arago), but if not specified by a Distro (Poky, distroless, etc.), the
default is to use the latest version. Hence need to change the default to not
automatically pick the latest version that is not ready yet.
This can be removed/reverted once those versions are ready to be picked by
default.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2020.12a sysfw and the applicable
DM update on j7200 and j721e based on 07.02.00.10 tag
Signed-off-by: Dan Murphy <dmurphy@ti.com>
The 7200-hs-evm does not exist as a machine and if it did then this
directive should have been j7200-hs. So just remove it as it is
unneeded.
From: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2020.12 sysfw and the applicable
DM update on j7200 and j721e based on 07.02.00.05 tag
Dan Murphy - Removed am64xx PV over ride
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
As meta-arm has this version in master, but not in dunfell, temporarily overlay
corresponding patches locally - could be removed for the next release. Need to
alter FILESEXTRAPATHS for bbappend to locate local patches.
Since meta-arm/dunfell has 3.8-specific patches in SRC_URI, let's redefine it
completely to match 3.11-specific patch list in meta-arm/master.
Last, but not least, guard all upstream recipe varibales with "ti-soc" override
to only affect platforms in meta-ti, but not any other BSPs.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and sysfw commit SHAs so that am64x picks
v2020.12 version.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update SRCREV to pick latest that includes AM64X support
commit 65dd16b4e ("ti: k3: Introduce lite device board support")
adds support of AM64X platform in ti-atf branch.
This patch updates the SRCREV and also updates the BOARD to "lite" to
build for the mentioned platform.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Update the ti-rpmsg-char library to 0.3.0 version that enables
the support for the various R5F remote processors on AM64x SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update to v2.4 tag merge from upstream to keep TF-A in sync.
For major changes in trusted-firmware-a, See:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-4
TI specific fixups include:
- stub for shutdown (CPUs enter wfi)
- uart console is now configurable.
While at it, update to include PV_k3 as 2.4. We use PV_k3 instead of
PV since this allows meta-ti to not affect other platforms esp in a
multi-BSP configuration.
We also add LIC_FILES_CHKSUM_k3 to make sure that we don't let any
re-licensing in the project pass through unnoticed as that has to
be carefully examined for making sure we have all the right legal
compliance - There has been no change compared to previous versions,
but we introduce this as a protection in case there is a change in the
future.
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Suggested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
commit a6904f563f ("Remove redundant YYLOC global declaration")
is in ti-u-boot-2020.01 branch now.
Updating SRCREV of ti-u-boot-2020.01 to pick the patch from there.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Backport a patch from upstream to fix build on distros with gcc10+
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Use latest SRCREV on master branch to pick up all the
changes compliant with TIFS 2020.08b firmware.
The license CHKSUM also need to be updated due to a minor
change from http to https in the Copyright line.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the srcrev to pick the latest artifacts that fix some of the
redundant rpath warnings seen with Yocto.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Use latest SRCREV on master branch.
This adds support for resource management commands
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the ti-rpmsg-char library to 0.2.0 version that includes
an improvement to signal handling logic.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
The patch for supporting the general toolchain is pulled into the repo.
Removing it here from the recipe.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
This fixes problems during cross compile where it starts to peek into
build host's include and library paths and causes errors with clang and
QA warnings with gcc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Add the initial recipes for building the ti-rpmsg-char package.
The library and examples are built using two separate recipes
in ti-rpmsg-char_git.bb and ti-rpmsg-char-examples_git.bb.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Add build dependency on optee-os for legacy HS platforms in non-Arago setups.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
As meta-arm/master now builds optee out of tree, hence use ${B} instead of
out/arm-plat-${OPTEEOUTPUTMACHINE}
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
As meta-arm/master now sets ${BUILD_DIR} to also include ${B} and release/debug.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
latest OE-core does not promote using trailing slash to make pseudo's
life easier
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update md5 README checksum for u-boot. No actual licensing changes.
Change is with u-boot commit
35bd70c5107f0 ("Convert CONFIG_SPLASH_SCREEN et al to Kconfig")
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Recipe in meta-arm doesn't use OPTEEFLAVOR, but optee-os Makefile can extract
it from OPTEEMACHINE.
Keep OPTEEFLAVOR for legacy platforms - used for HS signing in the output name.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
It was originally residing in meta-arago due to earlier dependency on meta-optee
layer from meta-linaro. Now optee is in meta-arm and this code can move to meta-ti.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the firmware to version 3.1.4
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the firmware to version 5.3.9
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update SRCREV to pick the latest artifacts. The GL headers are excluded
in the artifacts instead of it in the recipe.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk
Aldo drop build for k2g as firmwares are not yet available.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update the hsr/prp firmwares to latest that includes support for
timestamping rx packets. Unfortunately version number is not
incremented for this update.
Also rename the bb file to add PV in it.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Rename gcc-arm-none-eabi to gcc-arm-baremetal.
As meta-arm now provides baremetal gcc-arm-none-eabi version 9, and due to layer
priorities, let's rename gcc-arm-none-eabi to gcc-arm-baremetal to force picking
the right version for RTOS builds.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As part of replacing hard-coded /lib with ${base_libdir}, rpmsg_lib.lib was
also mistakenly moved from ${libdir} to ${base_libdir}, which is incorrect
and breaks other recipes, when they try to link against this library from
${libdir}.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
j7200-evm supports virtualization with Jailhouse hypervisor.
To use Jailhouse, kernel needs to boot with an additional
DTB overlay. Include this in the list of DTBs for the machine.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Initialize the cell names and console for the j7200-evm machine
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
capable dual Cortex-R5F MCUs and a Centralized Device Management and
Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and
I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
management.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
AM3/4/5 PREUTH driver now supports HSR/PRP offload driver. So include
these firmwares for the required SoCs.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This patch adds recipe for hsr/prp firmware on am3/4/5 SoCs. The binary
files are located on ti-linux-firmware.git. This is a forward port of
the recipe from processor sdk 6.3
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
IPUMM build is showing linker error for a function
ti_sdo_ce_utils_syscbuf_SysCBuf_Module_startup__E with latest xdc tool.
A dummy version of this function is added in ipumm as a temporary solution.
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating the srcrev to pick the latest changes which adds an unittest.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ti-sci-fw builds multiple config variants via multiconfig and the number
is expected to grow. Provide a recipe to package a single set of sources
for MAINMACHINE.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* libjli.so and libawt_xawt.so are now detected within the
ti-xdctools packages.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
A user of the meta-ti layer may choose to use a combination
of the machines herein with another kernel, not necessarily
the one from the machine definition.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
AM57xx PRUETH driver now support switch mode and needs prusw-fw to
support switch mode. Therefore include PRU switch firmware for AM57xx builds.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating srcrev to pick latest libs
- Support for surfaceless EGL display token
- RGBA4444 format support as window surface
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
rpmsg_kdrv_switch kernel module is implicitly dependent on the
for virtual ethernet driver. Ensure that the module is auto loaded
by default foe j7-evm platfom.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Full build of all examples is not needed. Update the
recipe to build only selected examples.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
May need to limit this to HS platforms in the future, but since there's
no SOC_FAMILY defined, listing them individually is rather painful now.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
While here format it a little bit to make
mailing list address stand out
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
uio_send and uio_read are the applications used for communication
between different Virtual Machines using the ivshmem protocol.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Latest upstream jailhouse uses ttyS3 as console.
Update the conf file so that this reflects correctly in the
tiny rootfs.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Latest upstream jailhouse uses ttyS3 as the console for
inmate cell. Update the recipe to pass the correct cmdline.
Override only for j7-evm
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The License checksum has changed due to version number change, but the
license itself has not changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Also correct ti-cgt-arm to not reference Hewlett-Packard, only Patrick-Powell,
according to included SPDX document.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Jailhouse 0.12 does not need to define custom config flags.
Remove the steps to copy the config from do_configure task
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As it happens, ion-tests requires gtest from by meta-oe, but meta-ti has no
dependency on meta-oe. Unfortunately this was overlooked when all ion recipes
were migrated to meta-ti. Fix this by moving just ion-tests back.
Cc: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license as such has not changed, but moved to a License file which
is not expected to change frequently
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The following is the main change done:
Use FW_RSC_ADDR_ANY for places where memory needs to be allocated
dynamically like RSC_CARVEOUT and vdev resource entries
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update srcrev to pick the fix for rt linux build issue.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
These boards have SGX GPUs but do not build as this recipe is not
compatible with them, add compatibles for these machines.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This also allows us to do two extra tasks so lets do them here:
- Add support back for Beagleboard and Pandaboard
- Remove plugins workaround as SO names are handled correctly now
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As multiprocmgr is a user-space app and should only use uapi headers, drop
extra -I for the kernel headers. Patch out any assumptions of direct access
to the kernel headers.
Cc: Suman Anna <s-anna@ti.com>
Cc: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update branch for zeus release. There is no change to srcrev.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update the branch id to pick the sources relevant to k5.4.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
For now only j721e_evm is supported when building for j7-evm
MACHINE target. Limit the BOARDS list in this case to what is
supported.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
python-argparse is not available in oe-core, but meta-python provides a
drop-in replacement python3-configargparse, if needed. meta-ti does not
depend on meta-python for now - can be adjusted in the distro layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SUBDIRS has been deprecated for a while and as of k5.4 no longer works.
Use M= instead.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This compresses better and most machines use this now, lets switch these
remaining machines over.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This package adds the xorg.conf needed for some Xorg servers. Xorg does
not need these anymore as the automatic configuration will handle this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This program uses many software components that are not recommended
anymore making it a bad example. The original source repo is gone.
It has dependencies on very old kernel versions. Lastly it doesn't
look to have been built by anyone in a long time. Lets remove this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode recipe
with Makefiles using CROSS_COMPILE instead of hard coding
aarch64-linux-gnu as the cross compiler.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode with improvements
to V4L2 decoder stream restart and slice map calculation, and
encoder performance profiling options.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Link the git directory into the recipe's work directory to provide
git history and commit information for recipes that may need it.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* dualemac: fix to drop PTP sync msgs from unknown master
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Updated the Software Manifest from 5.0 -> 6.0 to account for new processors,
etc.
- Updated to PRU Software Support Package v5.6.0
updated manifest
added PRU Getting Started Labs
improved several examples
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
CMEM memory block for bbai should be 402MB to allow full EVE
acceleration and DSP use, but accounting for the BBAI only having
1GB of RAM.
Signed-off-by: Caleb Robey <c-robey@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Changing BB_NUMBER_THREADS between successive builds causes a "basehash
value changed" error. Additionally, using BB_NUMBER_THREADS to pass a
number of processes to run to xdc is wrong: PARALLEL_MAKE is the correct
variable to use.
Fix both problems by using oe.utils.parallel_make_argument() to obtain the
number of processes to run from PARALLEL_MAKE.
Fixes:
ERROR: When reparsing .../meta-ti/recipes-ti/ipc/ti-ipc-rtos_git.bb.do_configure, the basehash value changed from 63897a188012cedde03f756b5dbbfa70 to 13b80bf4f4327c367bd201eb4aa32ad7. The metadata is not deterministic and this needs to be fixed.
ERROR: When reparsing .../meta-ti/recipes-ti/ipc/ti-ipc-rtos_git.bb.do_compile, the basehash value changed from 2fb59a7db2a2f69d2c25c06c1b6a4245 to 314c664cc040afae2800fcc378dd9ae0. The metadata is not deterministic and this needs to be fixed.
Steps to reproduce:
BB_NUMBER_THREADS="3" bitbake ti-ipc-rtos ti-ipc-examples-linux
BB_NUMBER_THREADS="4" bitbake -c cleansstate osal-rtos
BB_NUMBER_THREADS="5" bitbake ti-ipc-rtos ti-ipc-examples-linux
Reported here: https://e2e.ti.com/support/processors/f/791/p/825142/3059419
Reported-by: Matthew McKee (e-mail unknown)
Suggested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is allow user to override them in their configuration
Signed-off-by: Ankur Tyagi <ankur.tyagi@gallagher.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* LIC_FILES_CHKSUM changed to due to a corresponding change in the
S directory.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Recently individual components and LLD sources have been combined
into a single PDK repo. Use this class to specify the common source.
Also use this class to keep the sources separate from each other when
building. This keeps the build identical to previous recipes while
keeping control on interdependencies.
Similar to gcc-source, use the ti-pdk-source recipe to unpack the
sources into a "work-shared" area. Then hard-link only the necessary
files into a recipe's WORKDIR.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is the initial step toward Mesa-based EGL/GLES libraries which
support all the required EGL 1.5 extensions. We plan to provide a
Mesa-pvr recipe to build Mesa from source and SGX/DDK patches where
ti-sgx-ddk-um shall provide the EGL/GLES plugins only at the next step.
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There was a typo in machine description - AM435x instead of AM335x
Reported-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
IPC-LLD provides the low-level RPMSG based
communication interface between various cores
Signed-off-by: Santosh Jha <sjha@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
It rdepends on jailhouse package which is already marked at ti-soc
compatible only, so in a multi-BSP setup it ends up breaking builds
ERROR: Nothing RPROVIDES 'jailhouse' (but
/home/jenkins/oe/world/yoe/sources/meta-ti/recipes-bsp/ivshmem-uio/ivshmem-uio-driver_git.bb
RDEPENDS on or otherwise requires it)
jailhouse was skipped: incompatible with machine qemux86-64 (not in COMPATIBLE_MACHINE)
NOTE: Runtime target 'jailhouse' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['jailhouse']
NOTE: Runtime target 'ivshmem-uio-driver-dev' is unbuildable,
removing...
Missing or unbuildable dependency chain was: ['ivshmem-uio-driver-dev', 'jailhouse']
ERROR: Nothing RPROVIDES 'ivshmem-uio-driver' (but /home/jenkins/oe/world/yoe/sources/meta-ti/recipes-bsp/ivshmem-uio/ivshmem-uio-driver_git.bb RDEPENDS on or otherwise requires it)
No eligible RPROVIDERs exist for 'ivshmem-uio-driver'
NOTE: Runtime target 'ivshmem-uio-driver' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['ivshmem-uio-driver']
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The rpmsg-echo firmwares are not supported for Tx_PRU cores on
J721E SoCs, these cores only support the Halt images. So suppress
the build warnings around Tx_PRU rpmsg-echo firmwares by limiting
the default ALTERNATIVES and updating the list for just the
pru-icss-halt package.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
A firmware binary for guest is added to source repo, updating the
srcrev to pick the latest changes.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Erick Narvaez <e-narvaez@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is external kernel module which enables userspace io over the
Jailhouse ivhsmem (inter VM shared memory)
This driver is useful to test the inter VM communication.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode with fixes
for debug warnings.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes
beaglebone-capes-1.0-r4 do_populate_lic: ${COREBASE}/LICENSE is not a valid license file, please use '${COMMON_LICENSE_DIR}/MIT' for a MIT License file in LIC_FILES_CHKSUM. This will become an error in the future
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- New versions uses CMake and extra modules
- Correct detection of nm/ranlib/ar for LTO
- Fix build with clang/libc++
- depend on python3, needed during build
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum changed due to the version, but the license itself
has not changed since the last release (1.1.0)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated git commit & version number for PRU Software Support Package.
Builds J721E Halt and RPMsg examples and packages them into lib/firmware/pru
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Support for new CMA linux mem area is added, updating srcrev to pick
the latest changes.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode with latest
bug fixes.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Updated the ethernet Fw to use PDK memory map
so that it can run along with IPC apps in
CoreSDK.
* Added stripped version of the firmware
Signed-off-by: Santhana Bharathi <santa@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
`__get_order()` API got changed to `get_order()` in the newer kernel
4.19.73. Updating the srcrev to pick the corresponding fix in the
driver.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The fix from Khem Raj to use extern "C" instead of __BEGIN_DECL/__END_DECL macros
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The source repo has been updated with latest nulldrmws artifacts and
debug binaries. Updating srcrev to pick the latest changes.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The videnc-test-app provides the video encoder test app
(tienc_encode) for j7-evm.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
After libgbm was moved into the ti-sgx-ddk-um project the recipe for
libgbm was deleted, this patch was left over, remove it here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode which
includes updates for decoder and addition of encoder.
Also update the recipe to build the encoder module.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
OE-built internal toolchain doesn't use "-gnueabihf" suffix and instead uses
"-gnueabi" for both softfp and hardfp.
For now we only support hardfp (user-space binaries are only available in
hardfp), but would be nice to check for "callconvention-hard" before applying
the patch.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* If both INITRAMFS_IMAGE and JH_RAMFS_IMAGE are unset, variables fail to
expand, which leads to dependency errors.
* Passing full CC variable ensure all options are specified, especially
--sysroot one for internal toolchains.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating srcrev to pick latest fixes in the libs
- GL header updates to include latest extension definitions
- Fixes for NV12 format
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Virtualization support is added to the driver. Updating srcrev here to
pick the relevant sources.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This file was shipped as part of the DDK, but was also supplied by
libwayland so it was deleted here. This file has been removed from
the DDK, so deleting the file manually here is no longer needed.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
No one in-tree depends on this anymore. This used to be the name of the
package so this was kept here for several years for backwards
compatibility. Remove this from PROVIDES.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Although not needed for the IMG default EGL implementation this is needed
when building the Mesa EGL version of the DDK.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Although not needed for the IMG default EGL implementation libexpat
is needed when using the Mesa EGL version.
While here s/libudev/udev as 'libudev' is package shipped as part of the
eudev project, but we use systemd, so we actually depend on 'udev'.
Move the PACKAGE_ARCH and PR defines to a more natural spot that also
lines up with the RGX version of recipe for easier diffs.
One thing we could have done is remove the DEPENDS line. We do not have
any build dependencies as these are pre-made library binaries, but I use
the package rootfs generated by bitbake to build the binaries locally,
so leave it for now.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The GBM library is tightly coupled with the system graphics systems,
other hardware GPU vendors (including our Rogue DDK) and Mesa all deploy
a version of the library as part of their GPU driver. We SGX does the
same. This should ease integration for us as we now don't rely on a
separate project for this library and our deployment strategy can match
across Mesa/RGX recipes, allowing for better re-use of common components.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Configure the linux-demo to use a ramfs for the linux inmate.
* Using JH_RAMFS_IMAGE, this can be set in some global conf.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Create a package containing the jailhouse tools which are used to work
with the cells and inmates. This recipe provides a good example for
using the jailhouse-cell-linux tool.
The tools require the pyjailhouse python modules, so package them as
well.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Correcting the corelist. There is no mpu2_x or mpu3_x instead they
should be mcu2_x/mcu3_x which is present in j7-evm
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There is no mpu2_1,mpu3_0,mpu3_1 for j7-evm. They should have been
mcu2_1,mcu3_0 and mcu3_1 respectively.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The default TI_PDK_LIMIT_CORES set in conf/machine/includes/am65xx.inc
doesn't contain mcu1_1 which sciclient supports for am65x. Hence
appending it in the recipe.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* extend to am65xx family
* and correct am65xx cell and inmate filenames.
* remove earlycon bootargs for am65xx
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This tool is not publically fetchable yet and requires pre-downloading
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The checksum has changed due to version & date, the license has not
changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Previous commit, while adding support for another platform, extended
ALTERNATIVE variable (which is package-specific) with machine overrides,
accidentally dropping the necessary ${PN} suffix in the process.
Restore it to make update-alternatives system work again.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The PV has not changed as this is an incremental commit id update
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated IPC/LLD firmware binaries for AM65xx and
J721E to support WFI state for proper remote core
power-down and power-up.
Signed-off-by: Jonathan Bergsagel <jbergsagel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The License Checksum has changed due to version, the licenses have not
changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Use IPC/LLD based IPC echo test binaries as an
alternative for AM65X Linux IPC testing.
Updated location of J721E firmware binaries as well,
with latest IPC/LLD commit.
Signed-off-by: Jonathan Bergsagel <jbergsagel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum changed due to version, but the licenses haven't
changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Please note that LIC CHKSUM has changed due to version change.
The licenses themselves have not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Please note that the LIC_CHECKSUM due to date and version.
The License itself has not changed
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ti_bin_do_unpack() detects the absence of the required 32 bit libraries,
but only emits a warning. Later on the build will fail with a mysterious
error.
Fail immediately so the user can clearly read the error message and the
(always appreciated) instructions on how to fix the problem.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Using clang as default compiler fails to build these
since these packages explicitly asks for gcc as compiler
this ensures that we meet that demand
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This needs to be ported and tested with non-TI SOCs
its better to limit this to just TI SOCs as of now
this makes sure that meta-ti can be used in a multi-BSP
distro
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes
WARNING: python should use 4 spaces indentation, but found tabs in jailhouse_git.bb, line 85
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes build with non arm architectures
Subprocess output:x86_64-yoe-linux-strip: Unable to recognise the format of the input file `TOPDIR/build/tmpfs/work/qemux86_64-yoe-linux/ti-display-sharing-fw/00.09.00.00-gitAUTOINC+4a86f16df9-r0/sysroot-destdir/lib/firmware/ti-display-sharing-j721e.bin'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* rpmsg_client_sample is a test module and should not be autoloaded
* Both k3_r5 and k3_dsp remoteproc modules depend on virtio_rpmsg_bus
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Builds the Jailhouse kernel module, hypervisor binaries
and all the cell configs for root cell and other demos.
Generate the linux-demo loader script without initramfs.
Supports am65x and j7-evm machines
[nikhil.nd@ti.com: Update for public trees]
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Reviewed-by: Subhajit Paul <subhajit_paul@ti..com>
Tested-by: Subhajit Paul <subhajit_paul@ti..com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Adds the R5 and DSP echo_test firmware binaries to be
used for testing Linux IPC on J721E SOCs.
Signed-off-by: Jonathan Bergsagel <jbergsagel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Pick up latest version of ti-img-encode-decode which
fixes compilation warnings/errors with RT-Linux.
Also add "COMPATIBLE_MACHINE" to the recipe.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* add firmware for the R5F core to test the detection of watchdog
timeout events to trigger SOC reset though DMSC.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
We will start supporting Wayland window system. It is good to have nulldrmws as
a debug option. GPU driver recipe already support window system option.
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The prueth-fw-am65xx provides the same firmware but built from
sourecs.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The sources for the am65xx prueth-fw are located in within the
emac-lld sources.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The emac-lld also contains sources for the prueth-fw on am65xx.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
LIC_FILES_CHECKSUM now calculates checksum on the copyright, skipping
the year which can change. The checksum contents itself have not changed
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add the recipe for the video decoder driver.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add the firmware packaging recipe for the video decoder
for J721E devices.
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Restore max_leb_cnt so that the UBI/UBIFS fits into the board flash
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update mdio register entries to use the full address
* For AM571x, remove the entries which are available after using DT overlay
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The J721E SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration to enable lower system costs
of automotive applications such as infotainment, cluster, premium
Audio, Gateway, industrial and a range of broad market applications.
This SoC is designed around reducing the system cost by eliminating
the need of an external system MCU and is targeted towards ASIL-B/C
certification/requirements in addition to allowing complex software
and system use-cases.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, three clusters of lockstep
capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA),
C7x floating point Vector DSP, Two C66x floating point DSPs.
* 3D GPU PowerVR Rogue 8XE GE8430
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
and Motion Processing Accelerator (DMPAC)
* Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual
PRUs and dual RTUs
* Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and
up to two DPI interfaces.
* Integrated Ethernet switch supporting up to a total of 8 external ports in
addition to legacy Ethernet switch of up to 2 ports.
* System MMU (SMMU) Version 3.0 and advanced virtualisation
capabilities.
* Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems,
16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI,
I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
* Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
management.
* Configurable L3 Cache and IO-coherent architecture with high data throughput
capable distributed DMA architecture under NAVSS
* Centralized System Controller for Security, Power, and Resource
Management (DMSC)
See J721E Technical Reference Manual (SPRUIL1, May 2019)
for further details: http://www.ti.com/lit/pdf/spruil1
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add to the dependencies set in ti-pdk.bbclass so that we get tools
such as XDC.
* Set the edma3-lld path so the makefile can push it onto XDCPATH.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The checksum changed due to version & year changes. The licenses remain
the same
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* prueth-fw and icss-emac-lld shared the same source repo, so make
them share the same inc file which specifies the sources.
* Add the FW versions to the icss-emac-lld.inc so that there can be
a single location for updates.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
As this is a pre-built package:
* Skip the build-deps and file-rdeps checks.
* Disable package debug split.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The checksum has been changeded due to the version string and copyright
year. Licenses themselves have not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum change is due to version number. License has not
been changed. However Patrick powell license which was missing earlier
has been added now.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum update is due to the version number update. The
licenses have not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum changed due to the version and also because Hewlett Packard
license is no longer applicable.
The Patrick Powell license which was present earlier too was not mentioned in
the recipe, now it has been explicitly mentioned as well.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum change is due to the copyright year and version.
The license itself has not changed.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
License has been changed to include a few new licenses such as
Synopsis,Joel Sherrill,Rich Felker,Otto Moerbeek,embedded brains Gmbh,
Regents of Univ of California, Digital Equipment Corporation, John
Baldwin,WIDE project, Jeffrey Roberson, ARM Ltd, NetBSD,Michael R Nelly,
and CYGWIN license
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This upgrade brings in the following updates:
* MPEG2 Decoder Update to 01.00.18.01 from 01.00.17.01
* VC1 Decoder Update to 01.00.02.08 from 01.00.02.07
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The firmware names expected by driver is changed
am65x-mcu-r5f0-fw -> am65x-mcu-r5f0_0-fw
am65x-mcu-r5f1-fw -> am65x-mcu-r5f0_1-fw
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- bump SRCREV to pickup kernel 4.19 support
- enable AM3/4/5 support in addition to AM6 for DDK 1.17
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- bump SRCREV to pick up UM libraries for all supported SoCs at DDK 1.17
- enable AM3/4/5 support for DDK 1.17
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Upstream has changed copyright guidelines, no actual license change:
| Copyright guidance has been changed for migration of the
| ARM run project to trustedfirmware.org where the project
| governance is different.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Hence install and deploy UBOOT_SPI_BINARY conditionally, similar to
UBOOT_SPI_SPL_BINARY and UBOOT_SPI_GPH_BINARY.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Updated the recipe to pick sources for k4.19
- Removed the gcc8 workaround patch as the new srcrev include those fixes
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Changing the branch that the TI linux firmware is picked
up from. As this is a branch that is used for numerous
kernel versions so the version needs to be removed from the
branch name.
Changing ti-linux-firmware-4.1.y to ti-linux-firmware
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since both systemd and update-rc.d classes are inherited, not having a
corresponding file results in postinst function to fail, which is a hard
error now. Having both init files installed does not affect functionality.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since both systemd and update-rc.d classes are inherited, not having a
corresponding file results in postinst function to fail, which is a hard
error now. Having both init files installed does not affect functionality.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since cmem 4.16 now supports arm64, update cmem injection code accordingly
to work with arm64 DTS files.
Cc: Sam Nelson <sam.nelson@ti.com>
Cc: Jacob Stiffler <j-stiffler@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
1. Package everything including hidden folders for dsplib and mathlib
2. Update SRCREVs for dsplib and mathlib related to Proc-SDK 5.2 bug fixes.
Signed-off-by: Jianzhong Xu <xuj@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
PRU Software Support Package example PRU_ADC_onChip does not work out of the box
in SDK 5.1. This update fixes the PRU_ADC_onChip example.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- um: Validate mutex before lock and unlock
- um: Fix for RefCounting with mutex held
- um: Set the default mutex type to pthread mutex
- um: Fix the install path and scripts
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
-km: pvr_drm.c: move the assert_reset from DrmRemove to DrmUnload
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Some recipes that include ti-unpack.inc also need to build nativesdk packages.
Fixes errors like this:
| ERROR: Nothing RPROVIDES 'nativesdk-ti-cgt-pru' (but .../nativesdk-packagegroup-arago-sdk-host.bb RDEPENDS on or otherwise requires it)
| nativesdk-ti-cgt-pru was skipped: incompatible with host x86_64-arago-linux (not in COMPATIBLE_HOST)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
some OE distros can default to hardened toolchains which means PIE is
added implicitly to compiler cmdline, here this options makes sure that
whattever the default toolchain are, u-boot is not impacted
Fixes errors e.g.
| arm-yoe-linux-gnueabi-ld.bfd: u-boot-spl section `.rodata' will not fit in region `.sram'
| arm-yoe-linux-gnueabi-ld.bfd: region `.sram' overflowed by 5772 bytes
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Thanks for the feedback! Updated patch below. Changes:
- Change SERIAL_CONSOLE to new SERIAL_CONSOLES format.
- Move SPL_BINARY variable into lego-ev3 machine config
- Check for KERNEL_DEVICETREE_BUNDLE before uImage manipulation.
- Fix line wrapping errors introduced by MUA
Signed-off-by: Jeremy Grosser <jeremy@synack.me>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Use variables from u-boot recipe, makes it easy to switch between TI staging
and mainline u-boot from oe-core if someone wants to.
Use SPL_BINARY and UBOOT_SUFFIX to define IMAGE_BOOT_FILES
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This helps in multi-BSP scenario, where other BSP layers are also
present in the layermix
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There have been reports recently that am335x_beaglebone_config generates bad SPL.
Until that is debugged and fixed, use generic am335x_evm_config that covers all
AM335x platforms, including BeagleBone variants.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Fixes do_package_qa warnings
<FILE> is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
by default its set like this
DISABLE_STATIC ?= " --disable-static"
but doxygen configure is not typical autoconf
generated so this option is not available, its
better to keep it empty so it can work with
dustros which disable static libs as policy
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cleanup the patch in meta-ti as the patch is merged
to ipumm repo
Signed-off-by: Ramprasad N <x0038811@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Prevent a potential error as mklib will return an error if the
library already exists.
* The error encountered is the following:
| >> ERROR: mklib: destination library .../work/x86_64-linux/ti-cgt-arm-native/16.9.2-r1/ti-cgt-arm-16.9.2/ti-cgt-arm_16.9.2.LTS/lib/rtsv7R4_A_le_v3D16_eabi.lib already exists
| WARNING: .../work/x86_64-linux/ti-cgt-arm-native/16.9.2-r1/temp/run.do_compile.13758:1 exit 1 from 'lib/mklib --pattern=rtsv7R4_A_le_v3D16_eabi.lib'
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
dsplib/mathlib: do not install/deploy .metadata
Do not install/deploy .metadata folder for dsplib and mathlib packages.
This folder prevents CCS from finding and installing dsplib and mathlib.
Signed-off-by: Jianzhong Xu <xuj@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The license checksum change is due to copyright year change
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The LIC checksum update is due to copyright year change
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Remove DSPLIB recipe that downloads pre-built DSPLIB from ti.com.
Add new recipe to build DSPLIB for C66x, C674x, or C64x+ from source code.
Signed-off-by: Jianzhong Xu <xuj@ti.com>
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Remove MATHLIB recipe that downloads pre-built MATHLIB from ti.com.
Add new recipe to build MATHLIB for C66x or C674x from source code.
Signed-off-by: Jianzhong Xu <xuj@ti.com>
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add SWTOOLS which is needed to build xdc-based processor libs such as
DSPLIB, MATHLIB, etc from source.
Signed-off-by: Jianzhong Xu <xuj@ti.com>
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update to new commit with fixes for issues related to irq set API
Fix build issue with debug files
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
rtsv7R4_A_le_v3D16_eabi.lib library is not included in the cgt package.
This library is built dynamically during linking during a single build.
Bu in case of parallel make, dynamic creation of libraries causes
failures.
Hence building and adding the library to the package.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>t
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
With systemd enabled, it is better to add the proper systemd
script instead of legacy init.d script.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
TI design TIDA-01555 is added to Processor Linux SDK 5.1 as pru-adc-1.0.
Rename the PRU SW Support Package example PRU_ADC to PRU_ADC_onChip to prevent
confusion in the future.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This fixes a configure issue when the sources may get cleaned.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
One of the features of poky-lsb is that it brings in the
security_flags.inc file that sets a number of security-related compile
time flags. This includes changing some of the default GCC build
options. However, for building the amx3-cm3 firmware we want to ensure
that none of this enabled as it's not useful in this particular
environment. We must pass in ${SECURITY_NOPIE_CFLAGS} to disable PIE.
When security_flags.inc is not present this is an empty string so is
safe to do at all times.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
1.14:
- um: fix libGLESv2.so crashing at eglMakeCurrent for certain call flows
1.17:
- tools: usc2:dce: fix GLSL compiler error
- um: wsegl: fix the double unmap problem of CPU buffer
- um: fix libGLESv2.so crashing at eglMakeCurrent for certain call flows
- um: replace the hard-coded page size with the one read from kernel
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated the commit ID to fix the Makefile issue encountered
in the previous version of the patch.
This updates the commit ID of the PRU Software Support Package
which is pulled into the SDK. The updated PRU Software Support
Package includes:
added am65x resources:
PRU_Halt example
PRU_MAC_Multiply_Accum example
ICSSG header files
added Lab_0:
this provides a "Hello World" style beginning Linux example for
every TI processor with a supported PRU (am335x, am437x, am57x,
k2g, am65x).
expanded Lab_5:
expanded Lab 5 to provide a more advanced PRU Linux example for
every TI processor with a supported PRU (am335x, am437x, am57x,
k2g, am65x).
Kernel 4.14 new features:
updated resource table for all examples and labs to match the
new template introduced in kernel 4.14
Code cleanup/bug fixes:
update RPMsg examples to provide a more elegent way to provide
the max message length.
updated Linker Command files to better match TRM.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* License checksum changed due to updated year (2018) in license text.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
-Updates to use sciclient for configuring interrupt routing in SOC
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Sci client provides API to communicate with the core running System
firmware
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Adds support for k3 platform
NOTE:
License checksum change is just due to addition of current year
2018 to copyright
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Adds the dependency on toolchain needed for A53 and R5 cores
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Has fix for mmap issues with latest kernel 4.14.x
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This patch is to integrate IPUMM with
IPC: 3.50.01.00
BIOS: 6.73.00.12
XDC: 3.50.07.20
Signed-off-by: Ramprasad N <x0038811@ti.com>
Acked-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* CMEM increased to 384MB is required by TIDL to run both DSP and EVEs concurrently
Signed-off-by: Djordje Senicic <x0157990@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is to allow user to override git repository and git protocol.
Signed-off-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated SRCREV to point to an updated version of the PRU Software Support
Package which includes PRU_Halt and RTU_Halt examples for am65x. PV will
get updated in the next patch.
Added PRU_Halt and RTU_Halt to do_install_append_am65xx-evm(). Decided to leave
the installation of PRU_Halt examples in each processor's do_install_append
function for now since PRU_Halt and RTU_Halt for am65x have different output
file names than the previous ICSS processors. Those different output names can
be seen in the lines ALTERNATIVE_TARGET_pru-icss-halt[am65x....].
The previous commit made several changes to account for the fact that am65x Halt
examples had not yet been added to the PRU Software Support Package. Those
changes were removed in this commit.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Note: libEGL.so is required for DDK 1.17 based 3D demo programs
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- add COMPATIBLE_MACHINE to distinguish AM3/4/5 with K3 (AM654x)
- add k3 support based on SGX DDK 1.17
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
PRU Software Support Package v5.2.1 integrates 3 bug fixes and adds am335x
PRU_ADC example. PRU Software Support Package tags were updated so that v5.2.0
corresponds to the release that will be pulled into Linux SDK 5.0, while v5.2.1
corresponds to the commit for this version of the bitbake.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The current example application is Simple Open Real-Time Ethernet (SORTE).
It is ported to Linux user space utilizing UIO.
Signed-off-by: Hongmei Gou <a0271529@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Only PRU* images were picked up, not RTU*
* Setting up alternatives for non-existing PRU_Halt FW resulted in warnings
* Since PRU_Halt FW was absent, no ${PN}-halt package was made, resulting in
error pulling it in to an image
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
1. drop use of True as second parameter, which is default, to align with master
2. there were instances of incorrectly passing 'd' as second parameter from
previous conversion from bb.data.getVar() usage
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated SRCREV to point to the latest PRU Software Support Package.
Added support for AM65x by adding a COMPATIBLE_MACHINE, PLATFORM,
do_install_append_am65xx-evm which installs RPMsg examples,
PRU_ICSS_ALTERNATIVES, ALTERNATIVE_LINK_NAMEs,
ALTERNATIVE_TARGET_pru-icss-rpmsg-echo. Moved the installation of
PRU_Halt from do_install to the associated do_install_appends, since
am65x will require different PRU_Halts for each PRU/RTU core.
Did not yet add ALTERNATIVE_TARGET_pru-icss-halt as the am65x PRU_Halt
examples have not been written yet.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
b42044aaf removed the XDC tools from the main package, but this broke
the ability to include the XDC tools in an SDK. Add the tools back to
the -dev package. Also fix up INSANE_SKIP.
Change-Id: I902cc1a841e40c1a3bdc5286d03f999276119052
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The AM654 SoC is a lead device of the K3 Multicore SoC architecture
platform, targeted for broad market and industrial control with aim to
meet the complex processing needs of modern embedded products.
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The AM654 SoC is a lead device of the K3 Multicore SoC architecture
platform, targeted for broad market and industrial control with aim to
meet the complex processing needs of modern embedded products.
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This upgrade brings in the following updates:
* MPEG4 Decoder Update to 01.00.17.01 from 01.00.15.01
* VC1 Decoder Update to 01.00.02.07 from 01.00.02.05
* Update to IPC 3.47.01.00
* Add profiler to measure based on IVA-HD processing time
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* am335x-icev2-prueth.dts is newly added in kernel 4.14, and shall be
used as the baseline to create am335x-icev2-pru-excl-uio.dts
Signed-off-by: Hongmei Gou <a0271529@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Flag variables used in setup_cmem to force it to re-run when one changes.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This way keystone_remoteproc.h can also be found in sysroots, when available.
Otherwise it can fall back to using kernel sources directly.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The new version uses make install thereby eliminating the need to do the
same in the yocto recipe. Hence removing the same from the recipe.
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This also includes rtos receipes changes required as a part of update to
02.01.01.06C
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updating to version 1.0.0.11A and update the license checksum of the sub
component recipes
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- pickup the latest release which includes two local patches
- remove those two local patches
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Note: This is a tentative patch to enable graphics support.
We shall merge both local patches to the ti-sgx-km repo soon.
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since using DT overlays as a FIT image (itb,dtb,dtbo) is not yet ready
for prime time, kernel now has ability to generate all combinations of
full DTBs out of DT overlays. Use those for now until FIT image approach
to DT overlays is adopted more broadly.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The new version include the 2D API include files
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
DRA7xx board changes have introduced dependencies on mmcsd-lld-rtos and
pm-lld-rtos. Adding these modules to the omap-a15 depends list will
bring in the dependencies for dra7xx builds
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Includes documentation correction and build optimization for examples
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* ti-xdctools is a host development package, but the target recipe is
needed to create the sourceipk used in SDKs.
* And move class extension to common include.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
opencl-monitor does not distinguish between dra7xx and am57xx devices,
treating both as the same and attempting to build for am57xx regardless.
However, this is dependent on common-csl-ip-rtos, a component of PDK,
which in general does handle these devices differently. The definition
of am57xx SOCs in the PDK list from omap-15.conf gets inherited by
dra7xx-evm.conf, thereby creating a rule that all dra7xx PDK recipes
must build am57xx libraries. This results in a dra7xx image which is
much larger than necessary, and more severely, creates an artifical
dependency link between these two devices and introduces build failures
for various PDK recipes.
Instead, we now override the PDK SOC definition in dra7xx-evm.conf, and
only in the CSL RTOS recipe do we append the am57xx SOCS for dra7xx-evm
machine build. This allows for opencl-monitor to build successfully for
dra7xx while preventing any other PDK recipes from attempting to build
libraries for am57xx devices.
This is a workaround that must stay in place until opencl build can
properly comprehend am57xx and dra7xx independently, and/or omap-a15
is not implied to be synonymous with am57xx in various recipes.
Signed-off-by: Stephen Molfetta <sjmolfetta@ti.com>
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Also remove unused IPC_VERSION definition for ti-ipc-examples-linux
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The plugins package must include libGLES_CM.so in order for libEGL to
support GLESv1
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ti-xdctools should be a native recipe as it more accurately reflects how
it is supposed to be used. In addition, this allows it to be built as
nativesdk and included in SDK image tools
Signed-off-by: "Mertz, Timothy" <timothy.mertz@garmin.com>
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Jacob Stiffler <j-stiffler@ti.com>
1. Need TOOLCHAIN_OPTIONS to pass --sysroot parameter for internal toolchain
2. Use proper cp parameters to handle files ownership correctly
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Extend compatibility to k2g-evm
* Simplify compile and install tasks as "TARGET" is no longer needed.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There's no doxygen recipe provided by meta-ti, nor oe-core. And meta-ti
expects doxygen to be available as a host tool, per layers.conf
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* For the XDCMAKE recipes, a clean was already occuring udring the
compile task.
* Move the clean to the configure task to more closely match the
base.bbclass.
* As the non XDCMAKE recipes generate dep files, add a clean in
configure for when dependencies have changed.
* Use oe_runmake to share options between "make release" and
"make clean".
* There appears to be an issue with parallel builds using the
ti-pdk-build framework, so unset PARALLEL_MAKE.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updates to work with new GCC & BIOS versions.
Changes are not backward compatible
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Needs BIOS 6_52_00_12 and in turn needs gcc tools gcc-arm-none-
eabi-6-2017-q1-update
ti-ipc-examples: Separate Host linux and bios examples
This should save some build time as well, as ti-ipc-examples-linux will
only build linux host examples
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Linux installer binary file name has changed compared to previous
version
Break backward compatibilty for A15 gcc tools: requires gcc-arm-none-
eabi-6-2017-q1-update or later
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The source location changed to developer.arm.com compared to previous
version
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* KERNEL_DEVICETREE is now specified in the machine configuration and
these appends have already been added there.
- This removes the duplcitaion of these device trees in this list and
thus resolves the "duplicate node name" failure during the fitImage
creation.
* Extend am57xx-evm dts injection to dra7xx family
- Now that KERNEL_DEVICETREE is specified in the machine
configuration, am57xx-hs-evm inherits this list from am57xx-evm.
- Extending these injectionsto the entire family allows these device
trees to be availble for am57xx-hs-evm as well.
- For dra7xx-evm and dra7xx-hs-evm, these device trees will not be
built as they are not included in their KERNEL_DEVICETREE list.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The ipumm-fw repository had to undergo a forced commit update.
This was an unforeseen update and had to be done in urgency.
This recipe update takes care of fixing the new commit-id that
corresponds to the previous version that was being used.
There is no functional change.
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The Device Tree support is now handled by the kernel class. This patch
removes the inclusion of linux-dtb.inc from the kernel recipes in this
layer.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Recipe for TI RTOS Networking development kit
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The pru-uio device tree file for am572x is also updated to support
icss-emac-lld in Linux userspace.
* The new dtbs are added only if ENABLE_TI_UIO_DEVICES is enabled.
Signed-off-by: Hongmei Gou <a0271529@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* starterware.inc is created to host the common information
Signed-off-by: Hongmei Gou <a0271529@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Upstreaming TI RTOS low level driver for Digital Radio Front End
Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This recipe adds the Intermediate Bootloader (IBL) for c665x-evm
and c667x-evm.
Signed-off-by: Ivan Pang <i-pang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This recipe adds the Multicore Application Deployment (MAD) utility
for c665x-evm and c667x-evm.
Signed-off-by: Ivan Pang <i-pang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This recipe specifically installs the 7.x.x series of TI CGT6x.
Signed-off-by: Ivan Pang <i-pang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This directory path is for installing TI CGT6x 7.x.x as well as
invoking the installation from other recipes.
Signed-off-by: Ivan Pang <i-pang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Update ipcdev branch to 3.46 ( commit id remains same)
- Adds support for c66x platforms
- Update to avoid stripping for IPC rtos example binaries
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updates to dce_test to print additional
extendedError for VC1 and MPEG2
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* In version 8.2.0, the default compression algorithm used by cinit
was changed from RLE24 to LZSS.
* This change exposed cache coherency issue related to global objects
in multicore applications.
* Revert to 8.1.3 to allow time to resolve the exposed issues.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Removed depency on gcc-arm for omapl138, which was a mistake
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Remove the old 2.x version of Codec Engine, that hasn't been updated in years
and the corresponding codecs-omap3530 package.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
gstreamer-ti hasn't been updated in years. All the modern gstreamer plugins
and bindings for TI platforms now reside in meta-arago-extras layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* These device tree files are to support pruss with uio based
drivers alone. The new dtbs are added only if ENABLE_TI_UIO_DEVICES
is enabled.
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The omapl137 family does not have linux support and is only
supported by baremetal and TI RTOS.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update the device tree lists with the latest DTB names from the
machine configuration.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
In morty license is being set in main u-boot.inc, but in master that got moved
to versioned include. Restore setting license in u-boot-ti.inc
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The c66x SOCs (e.g. c665x-evm and c667x-evm) are DSP-only devices,
and therefore do not have a supported kernel nor an integrated
toolchain.
* Add these machines to allow the creation of baremetal and TI RTOS
packages.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* These variables have been moved into the machine configuration
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Set the ti-pdk class variables which sets the list of devices and
boards supported.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Use LIMIT_CORES to enable only the cores with available toolchains.
* Add new variables which will allow recipes to fully configure the
options provided to make.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add TI_PDK_ prefix to variables which may be set by recipes to
stress that they are used to configure the ti-pdk class.
* Deprecate TI_PDK_XDCARGS in favor of TI_PDK_LIMIT_SOCS as both are
used to define a list of SOCs.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Cc: Justin Sobota <jsobota@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The set of files installed varies between machines.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Use the oe_runmake wrapper to invoke make
* Supply common make arguments to EXTRA_OEMAKE such as which makefile
to invoke.
* This resolves build issues when osal needs to be reconfigured
as do_configure would make the clean target of the incorrect
makefile.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
By default rproc firmware default link is added as message_single.xe66
for omapl138
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Looks like between adding new platforms and modifying .inc, some files were
not properly deployed and got missed from sstate cache.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This update fixes the issue where the copycodec
firmware crashes every 300 seconds after bind/
unbind operation
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
In the zram tests, zram01.sh script calls bc command.
Add bc to zram RDEPENDS.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Adjust md5sum/sha256sum for the updated tarball
* Add new dependencies:
- numactl, used by net tests (for libnuma)
- util-linux, used by gpio tests (for libmount)
* Get rid of the TARGETS list, manually maintained. Rely on the top-level
Makefile to call all the TARGETS. As a result, TARGETS isn't passed to
EXTRA_OEMAKE anymore.
* Update EXTRA-OEMAKE:
- pass V=1 to be more verbose in the logs
- pass LD to fix gpio tests and avoid to use native linker causing a
build failure in cross-compilation environment.
* Call headers_install in do_compile() to make sure to install the user
space API used by some tests but not properly declared as a build
dependency.
* Add new packages: bpf, gpio and sync tests.
* Allow empty package for bpf. It fails to build and need to be fixed.
* Add sudo to vm package RDEPENDS.
* Add breakpoints package on Aarch64. An arch specific test has been
added, though it is currently broken due to missing TRAP_BRANCH and
TRAP_HWBKPT definitions in glibc siginfo.
* Add ipc package on Aarch64.
* Get rid of do_configure() and convert the Makefiles fixes to patches,
easier to upstream.
* Add patches to fix gpio and net tests. Also add a partial patch for
breakpoints on Aarch64, not applied for now because we need the glibc
fixes counterpart (see explanation above).
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is required to workaround the remoteproc crash due to watchdog interrupt
conflicts - LCPD-9490
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Sam Nelson <sam.nelson@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Separated Linux host examples into separate package ti-ipc-examples-
linux and installed into /usr/bin directory.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
run_kselftests.sh contains randomly spurious lines starting by "make[1]:".
The way the script is generated is most likely broken.
Until, we've got a proper fix, get rid of the lines after the generated
script is installed.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Recursive makefile is broken because it's using the same TARGETS variable
as selftests topdir and prevent to build futex functional tests:
make[2]: Nothing to be done for `all'.
Rename the variable to F_TARGETS in the futex functional tests Makefile.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The script in scripts/Makefile.spl uses bc in line 201. Not having the dependency in the recipe can make the compile task fail.
Signed-off-by: Florian Wickert <fw@javox-solutions.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Use the same fixup as used for timers test:
use LDLIBS to properly link against libpthread.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
sigaltstack was not using TEST_PROGS resulting in binary not being installed
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Fathi Boudra <fathi.boudra@linaro.org>
* Adjust md5sum/sha256sum for the updated tarball
* Add libpcap dependency, needed by vm/mlock-random-test
* Rewrite TARGETS as a list (easier to copy/paste/update) and filter out
arch specific tests using bb.utils.contains_any()
* Add new tests introduced with 4.9 : capabilities, futex, lib,
membarrier, nsfs, pstore, seccomp, sigalstack, static_keys, zram.
* Adjust the packages list for the new tests.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update to copy NOT to preserve ownership (but to preserve mode and
timestamps)
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Now, that 4.9 finally switched from ttyO to ttyS and all issues were addressed,
no need to try all possible combinations in most cases.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The bb.data.getVar() API has been deprecated & removed. This change
follows that change and allows MACHINE=beaglebone to work again.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ipc code looks for kernel's generated version.h file:
#include linux_version_include(KERNEL_BUILD_DIR)
which now ends up in the following shared workdir:
work-shared/<mach>/kernel-build-artifacts/include/generated/uapi/linux/version.h
It appears if kernel is provided by sstate, shared workdir is not
getting populated, so depend on the task explicitly.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update to ti2017.00-rc2 tag as well as 4.9.13 kernel
revision
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
AM43x was missing the hdmi dtb file in the
KERNEL_DEVICETREE variable. Adding this in allows for
a copy to deploy directory.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The old license file, LICENSE.txt, has been removed in this release,
so use the HTML manifest for the license.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This change will include:
* New interface file for MJPEG Encoder
* Increase max instances of Engines
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add device option to build for specific device
Make package Machine dependent
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
multiprocmgr-test installs source files, host binaries and associated
scripts (ti/examples/mpm/test)
multiprocmgr-rtos-test installs the C66x test images in the same
directory structure.
Other updates include
- Use of oe_runmake instead of make
- Added runtime dependency of multiprocmgr-rtos-test & bash
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Also moved RELEASE_TYPE & RELEASE_SUFFIX variables to ti-ipc-rtos.inc
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This update includes the following
- Remove dependency on dmac_flus/inv/clean_range
- Remove spurious page count increment
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The OCP SYSCONFIG register should be controlled by kernel hwmod only.
the original code sets the SGX idle and standby mode to "No Standby"
which prevents the SGX power domain to reach off state during suspend.
Even though the problem was only introduced with kernel 4.4 upgrade, i.e.
it seemed to be no harm before, we should remove the same.
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Causes following error:
Exception: AttributeError: module 'bb.data' has no attribute 'getVar'
Signed-off-by: Thomas Perrot <thomas.perrot@tupi.fr>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Use the oe_runmake wrapper to invoke make
* Supply common make arguments to EXTRA_OEMAKE such as which makefile
to invoke.
* This resolves build issues when pruss-lld needs to be reconfigured
as do_configure would make the clean target of the incorrect
makefile.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
-Enables parallel build when rtos build invokes xdc to reduce build time
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This will include the following updates:
* Addition of MJPEG Encoder
* minor bug fixes
* codec updates for mpeg2d
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cleaning up redefinition of mpm areas and moving to use what is defined
in the base device tree files as is.
This effectively changes to a new memory partition.
Note that this change needs a corresponding change in the dts files in
the kernel tree to adjust the mpm memory area to the new memory
partition.
The CMEM areas here are adjusted such that there is no overlap with the
mpm areas defined in the dts files in the kernel tree.
Note also the address ranges are arranged differently for K2G compared
to the other Keystone platforms.
(This is to accomodate common memory map for multiple k2g platforms)
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cleaning up redefinition of mpm areas and moving to use what is defined
in the base device tree files as is.
This effectively changes to a new memory partition.
Note that this change needs a corresponding change in the dts files in
the kernel tree to adjust the mpm memory area to the new memory
partition.
The CMEM areas here are adjusted such that there is no overlap with the
mpm areas defined in the dts files in the kernel tree.
Also fixes issue with K2L, by removing overlapping memory area section.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Both parameter depth and bpp are set to uiPixelWidthInBits at the current
implementation, however, the depth may not be the same as bpp for certain
pixel format such as XRGB8888. This bug was exposed by the recent DRM
driver change introducing strict error checking. To fix this problem,
add utility function uiPixelDepthInBits to derive and use depth based on
the pixel format.
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update and fixes to handle different type of memory sections in sysfs
entry or device tree.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
cmem.dtsi splits the already defined dsp_common_mpm_area DDR memory into
a smaller MPM segment and other CMEM blocks.
The mpm_block_mem is removed and instead the original memory sections
dsp_common_mpm_area and mpm_mem in the kernel dtb are updated to reflect
On the MSMC memory, cmem.dtsi defines a sram subnode instead of the
reserved memory.
mpm MSMC areas are already captured in the kernel dtb.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Created ti-ipc-common.inc & ti-ipc-rtos.inc to gather common definitions
Updated commmit ids for ipc-examples
Update ti-ipc-rtos to add ALT_PLATFORM examples
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Random build failures are reported on SGX driver when building for
different targets. Disable parallel compilation in SGX driver.
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Due to bug fixes and updates, the package version number
is being incremented to 5.1.0. The commit ID is also being
updated to reflect these changes.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This helps in using this inc file from other BSP
layers which are dependent on meta-ti
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
CC is being redefined here but its not considering
the essential options to specify the sysroot as a result
this breaks on systems tied to sstate servers where the toolchain
might have had a different sysroot when built, in here
it fails to find the standard headers due to missing sysroot
options.
Deleting the extra oeconf works fine.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This patch adds support for importing DMABUFs as EGLImages.
This work is based on the Spec defined in
https://www.khronos.org/registry/egl/extensions/EXT/EGL_EXT_image_dma_buf_import.txt
The feature currently supports YUYV and NV12 formats
In addition, the following are supported:
* YUV full range and narrow range
* YUV color space BT709 and BT601
* YUV color space BT2020 is not supported
* Chroma siting parameters are ignored
For YUYV buffers, user needs to pass the width, height, and a 3-tuple
consisting of the dmabuf fd, pitch, and offset=0.
For YUV buffers, user needs to pass the width, height and two 3-tuples
consisting of the dmabuf fds, pitches, and offsets=0.
Please note that multiple dmabuf fds are not supported, and therefore,
for NV12,
* fd[0] must be equal to fd[1] and
* pitch[0] must be equal to pitch[1]
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The multiprocmgr's mpmsrv daemon requires a set of kernel modules to
be loaded prior to initialization.
* Add a systemd service so that these dependencies may be specified.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The MSMC region needs to be relocated as it was conflicting with the
boot monitor's persistent memory.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- M4F target is not needed for omap-a15
- This reduces build time for platform associated with omap-a15
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add new method to perform CMEM DT injection as it is required to
customize at a finer level than machine.
* Now CMEM injection can be performed per DT.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Due to bug fixes and updates, the package version number
is being incremented to 5.0.1. The commit ID is also being
updated to reflect these changes.
Line ending corrections to the manifest file also caused
a new checksum value to be necessary. This has been updated
in this commit as well.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Kernel drivers for the Vivante GC320 chipset found in TI SoCs
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
libPVRScopeServices.so is required for the Imagination PVRTune operation.
Signed-off-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Set DEFAULTTUNE optimization in BSP from specific Cortex level to more generic
armv7a, but keep thumb, neon and hard-float options enabled due to numerous BSP
components requiring them. While enabling additional Cortex optimization might
gain a tiny performance improvement, it makes binary feeds incompatible between
A8, A9 and A15 machines, leads to unnecessary rebuilds and hides potential
packaging or recipe issues. Hence the decision to enable Cortex optimization
should be left to the Distro.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* added performance improvement in find_slots routine to skip full bit
map words in search
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This will be required to analyze the remoteproc crash related
issues, whenever it occurs.
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This package is now used for multiple omap-a15 SOCs, having only single machine
covered in overrides breaks other machines.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Disable active power management in SGX. This will enable host triggered
suspend-resume for SGX.
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Disable active power management in SGX. This will enable host triggered
suspend-resume for SGX.
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated tag added to ipc dev branch to the same commit id
to avoid confusion.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This update contains two main changes:
* Fix for multimedia playback failure with core dumped
* New API addition for querying remote proc information
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Made the package machine dependent due to content changes with platform
Fixed DEVICE_NAME to keystone instead of keystone-evm
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This firmware images are expected to be used with uio pruss test code
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The PRU Software Support Package now includes examples for
the k2g device that need to be built and then placed into
the file system.
The Linux driver now supports loading firmwares into both
PRU-ICSS subsystems on the am437x device so the recipe was
also updated to build and install those firmwares.
Non-backward compatible changes were made to the inner
workings of rpmsg that required a major revision bump. The
package revision was bumped to 5.0.0 and this commit moves
the SRCREV to the v5.0.0 tag.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Rearranged memory sections
Added additional memory section to accomodate required sections more
than 8
Incremented PR append for linux-ti-staging
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated to new version 3.42.01.03
Added procedures and source urls for adding examples and documentation
into src package.
Added dependency on doxygen for document creation
Added big endian c66 targets
Updated uniform formatting
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
added additional entries to allow access to ecap and uart regions
Update Kernel PR to force rebuild
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This new device tree file is to support pruss with uio based drivers
alone.
Adds uio entries for pruss susbsystem and disables other drivers
controlling the same.
New dtb is added only if ENABLE_TI_UIO_DEVICES is enabled.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Reformatted recipes to have one common PV between module and test
recipes
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* License checksum has changed due to an updated date in the LICENSE
file
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The ti-sgx-ddk-um recipe installs pre-built libraries
* Because of this, the dependencies are given as RDEPENDS as they are
not needed for building the recipe
* However, this may break recipes which depend on ti-sgx-ddk-um, as
the ti-sgx-ddk-um dependencies may not yet be populated in the
sysroot.
* This resolves the break in the dependency chain by translating the
RDEPENDS into a list of DEPENDS
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The openmp-rtos build procedure uses zip to create the release
package and is therefore the native zip is required as a dependency
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Besides being outdated and deprecated in favor of new ti-sgx-ddk recipes
(previously known as omapdrm-pvr and omap5-sgx-ddk), 3D graphics drivers
are kernel specific and corresponding kernel versions (prior to 4.0) have
all been dropped already.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This var now contains staging paths and by expanding it early, sstate ends up
churning the package for each machine built.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update Osal_cache_op_measure to take pointer to a double long to
match with the hplib
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Fix linker option for linux example and test binaries
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Fix linker option for linux example and test binaries
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Fix linker option for linux example and test binaries
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Fix linker option for linux example and test binaries
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This version includes the following changes
- Port to the 4.1 kernel
- Fix the test linker options
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Definition of PLLC registers in CSL: wrong offset for EMUCNT0/1
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Test code uses uio driver for mapping peripheral registers and hence the
addition of dependency.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Due to bug fixes and updates the package version is being
incremented to 4.0.2. The commit ID is also being updated
to reflect these changes.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Correct incorrect driver compatibility key. uio driver implemented with
uio-module-drv for keystone2.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Test code uses uio driver for mapping peripheral registers and hence
the addition of dependency.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This upgrade includes debugss support for AM57xx EVM PG2.0
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The following fix is provided in this upgrade:
- Fix K2G .tomp_svNcMem initialization
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Upgrade to obtain the following fixes:
- Fix task barrier at end of parallel region with num_threads(1)
- Avoid unused QMSS dependency on K2G
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Despite supporting building of individual targets, there is a
dependency on all toolchains even if the coresponding core is not
part of a specific platform.
* This fixes do_configure with ti-xdctools_3.32.00.06 and
ti-sysbios_6.45.01.29
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This commit corresponds to the tag DEV.MPM-3.00.01.00
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Updated to GA version and commit for IPC 3.42
Added additional platform for K2HK
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This makes it easier to override the source revision for all ti-ipc
recipes
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This is only compatible with ti33x, ti43, and omap-a15 as a SRCREV
is only supplied for these SOC families.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Previously, only examples for PRUSS1 were provided for the
am437x device. A patch now exists to load firmwares into
PRUSS0 instead of PRUSS1. This caused a naming convention
change in the am437x RPMsg examples. This commit updates
the recipe to use the new folder naming convention.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Also use new variables to specify the source info so this can be
easily overridden and applied to each recipe.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Correct the name of the variable used to define the size of the logo:
GUI_MACHINE_CLASS renamed MACHINE_GUI_CLASS.
Signed-off-by: Thomas Perrot <thomas.perrot@tupi.fr>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
When RPM is used as the packaging type, rootfs will fail because RPM, by
design, check for file level dependency. Here one of the shared objects
(libpvrEWS_REMWSEGL.so) has dependency on ld-linux.so.3 and libews.so.
It is unclear why meta-ti requires ld-linux.so.3, which is a dynamic
loader for soft-float arch. Hence I fake the existence here.
Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Adds device tree entries for multiple devices that use uio driver
- These entries are added for k2h, k2l & k2e : keystone2 platforms
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* With the addition of the video analytics demo, the filesystem has
exceeded size limited by the previous max_leb_cnt.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* dra7xx:
- Increase DDR region required to pass OpenCL conformance
- Add OCMC region
* k2e-evm, k2l-evm:
- Add reserved regions for these machines
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Extend support to ti33x and ti43x
* Fix build for keystone
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Re-implement common-csl-ip-rtos using the ti-pdk class
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ti-softhsmv2 needs to look at the target include directories instead of the host
include directories for zlib and openssl header files. By using
STAGING_EXECPREFIXDIR we can support changes to exec_prefix.
Signed-off-by: Paul Barker <paul.barker@commagility.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update the commit sha to the latest commit for
the boot monitor and uptick the rev as well
The update contains non-critical build fixes
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Remove executable permission for json and include files.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Due to bug fixes and updates the package version is being
incremented to 4.0.1. The commit ID is also being updated
to reflect these changes.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Update to eng release 2.0.0.0
- Added install append for new API header file
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Update to work with kernel version 4.1 and also other uio driver
changes.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Updates to work with kernel version 4.1 and other uio driver changes
- Making the package machine specific and hence the dependencies
according to the platform is updated
- Add use of oe_runmake instead of direct call to make
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* DefaultPixelFormat is used to set the default EGL pixel format
Signed-off-by: Eric Ruei <a0850410@uda0850410>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Update to new version of IPC: 3.41.0.3_eng
- Add recipe to build ti-ipc-rtos from git repo
- Remove K2G hack
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Create packages for the PRU_Halt and PRU_RPMsg_Echo_Interrupt
example firmwares
* Use update-alternatives to link these to the required firmware path
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Support wayland/DRM mode
* Remove powervr.ini which is no longer needed
* Add plugins package to include the necessary .so files
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Due to this change, the init script is no longer needed
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Due to this change, the init script is no longer needed
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Due to this change, the init script is no longer needed
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Due to this change, the init script is no longer needed
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Supply the entire cmem.dtsi per machine
- Disabled by default
- Currently only supported for dra7xx and k2hk-evm
* Enable by setting RESERVE_CMEM = "1"
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- The init script is used to create symbolic link to the right
device library
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides low level driver and test binaries for keystone2 antenna
interface peripheral
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Add device independent symbolic link for dynamic library
- Add utils to test build
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Add script to create device independent symbolic link to actual
device library
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Remove seperate build for dynamic and static cases
Make now creates two test binaries one use dynamic and other using
static library
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Remove the OCP_SYSCONFIG setting so that power management capability
will not be disabled
* Put SGX device in reset state when PVRSRV driver is removed
* Disable the Interrupt Sync Check unless SUPPORT_LISR_MISR_SYNC is defined.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* version update and install/stage the source tree w/o compiling examples
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* ti-osal is added for building dspdce-fw and ipumm-fw in Yocto
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Get changes for adding softlinks for libGLES_CM.so.1 and libGLESv2.so.1
Signed-off-by: Hongmei Gou <h-gou@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Also add test code recipe for uio-module-drv
- Common part of recipe moved to uio-module-drv.inc
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add AM3 and AM4 which use null_windown DRM
* Add pvr-init to /etc/init.d
Signed-off-by: Hongmei Gou <h-gou@ti.com>
v2 changes:
1) Use 8 as the initialization number for pvr-init, since pvr-init needs to be done before starting weston which uses number 9
2) Create empty powervr.ini as the default, and place ti33x and ti43x specific ones in their corresponding directories
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Need to unconditionally clean the sources before building the first time,
due to wrong binaries present. But calling clean twice also causes failure.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This version adheres to the new "core" package format.
* Add the version-indepedent include file for the core packages
* Extract common information between the core and legacy packages
into the ti-xdctools-common.inc file.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Without the "--with-zlib" configure option, the zlib header will be
obtained from the build machines "/usr/include" directory if the
header exists there.
* From ${S}/m4/acx_zlib.m4:
AC_DEFUN([ACX_ZLIB],[
AC_ARG_WITH(zlib,
AC_HELP_STRING([--with-zlib=PATH],[Specify prefix of path of zlib]),
[
ZLIB_PATH="$withval"
],
[
ZLIB_PATH="/usr"
])
AC_MSG_CHECKING(what are the zlib includes)
ZLIB_INCLUDES="-I$ZLIB_PATH/include"
...
* Therefore add configure option to point to staging sysroot for zlib
header and add dependency on zlib.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* These packages only contain firmware development files.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Note: this prebuilt FW image hasn't been released publicly yet - interim copy
It doesn't have the correct Manifest either.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This is version specific, so it should not be in a version-agnostic
include file.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* c6x DSP development files required to support remote gdb debugging.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This is version specific, so it should not be in a version-agnostic
include file.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Many RTOS packages assume that the entire cgt is installed in a
single directory as opposed to standard install paths.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* dsptop is a utility that provides a top-like interface to observe
DSP resource usage in real-time.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The debugss-module-drv is require for the dsptop utility.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
To reserve contiguous memory for CMEM:
* include the "recipes-kernel/linux/cmem.inc"
* Set CMEM_BASE and CMEM_SIZE to the physical memory address and size,
respectively, to reserve for CMEM.
Currently limited to reserving a single memory region used to create
a single buffer pool of a single buffer.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Adds ipc transport layer using srio interface
- Supports k2h & k2k devices
- test recipe provides test code using srio transport
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Add new transport using qmss, srio modules
- Update new dependency on cmem, rm-lld, qmss-lld, cppi-lld & srio-lld
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Add init script for creating symbolic link for generic device library at boot time
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Add init script to add symbolic link for generic device library
- remove unused CHOICELIST
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Add init script for creating symbolic link for generic device library boot time
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This allows the modules to have a consistent installation structure
when directly building from source.
* Previously, these modules would be manualy installed to appears as
in-tree modules.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Branch names changed to release version specific branch
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* "linux/remoteproc_user.h" is included by ./src/daemon/mpmdlif.c
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provide TI user space network library and test code
- Supports k2h, k2k, k2l & k2e devices
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This version introduces the ability to configure CMEM through
the device tree.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Supports native and nativesdk classes as well as target.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides user space low level driver for srio peripheral
- Devices supported k2h & k2k
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* ti-unpack.inc has been created to allow support for general binary
installers by creating a variable which is used to pass arbitrary
arguments to the executable.
* ti-eula-unpack.inc sets the default arguments to retain support for
recipes which still use this feature.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides low level driver for Digital Radio front end
- Supports device k2l
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Need to add -l for the log file parameter
- Added -- to pass log file as additional parameter
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This graphics sdk is a minor update to the 05.01.01.01 version but includes
updates to support the 3.14 kernel.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides zero copy access from user-space to packet dma channels
via udma kernel driver
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provide library, deamon and util for ti customised softhsm
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This is need to allow some room for customers to build on top
of the filesystem that we support
* This is needed for larger filesystem size to support dev image.
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
VPDMA firmware is published publicly as IPUMM firmware.
This patch creates a separate recipe for VPDMA firmware.
Also, it updates the package names in kernel dependencies.
The vpe-tests is an independent recipe which can be included
in the packagegroup if required.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides Smart reflex temperature control with keystone devices
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provide libraries and test code for trace framework.
- Support framework to stream data from producer to multiple consumers
- Supports devices K2H, K2K, K2E, K2L & c6614
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Recipe split into main and test recipes.
- Added dependency on mpm-transport & libdaemon & syslog-ng
- Added startup scripts for daemon
- Removed PR
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Original location: meta-arago:
meta-arago-extras/recipes-bsp/multiprocmgr/multiprocmgr_git.bb
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides high performance library, kernel module, user space libraries
and test binaries
- Supports devices k2h, k2k, k2l & k2e
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The Sitara 3.14 Kernel tree is based on the linux-ti-staging_3.14 recipe and
kernel. However, the tree includes additional patches and configs.
* This tree is only meant for AM335x and AM437x
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- without this the compilation and install doesnot happen
because of main make filename.
- Correct mistake on extra oemake options
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Handle multi-config kernel builds with separate namespaces to allow installing
them side by side safely.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- pktlib: provides library for handling packet descriptor for keystone devices
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Commit id and version updated to DEV.MPM-TRANSPORT-01.00.06.00
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- mpm-transport provide basic transport layer for moving data between different processing nodes
- Support communication with the process nodes using shared memory and hyperlink interface
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides low level driver and test code for Communications port programming
interface module
- Supports k2h, k2k, k2l k2e devices
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides memory map driver using Keystone MPAX module
- Test recipe is used to build test binaries using the mmap lld library
- Supports k2h, k2k & k2e
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Provides low level driver for Hyperlink module
- Test recipe is used to build tests and examples using
the hyperlink library.
- Supports k2h, k2k & k2e
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This includes the error handling support.
* Minor bug fixes
* Relax support for entire DRA7xx SOC family to cover AM57x
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Add to patches to fix the build of cmemk and sdmak kernel modules.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Commit 7d7e1eb (ARM: OMAP2+: Prepare for irqs.h removal) and commit
ec2c082 (ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ)
from kernel updated the way interrupts for OMAP2/3 devices are defined.
Fix irq number as dsplink misses to add the NR_IRQS relative offset.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Remove unused includes that only redefine some typedefs already defined in
other includes and add the --sysroot flag to fix a linkage problem.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Removed ti-prefix based on review
- Update to new version 2.1.0.6
- Add dependency on libdaemon
- Remove device dependency
- Updated license to BSD-3-Clause
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Moved recipe from meta-arago based on review comments
- Provides resource manager low level driver
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Otherwise fails with the below error, similar to am33x-cm3:
fatal error: gnu/stubs-soft.h: No such file or directory
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This version is compatible with version Kernel 3.12
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Contains incremental updates and bug fixes
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This error will show up when using sstate which was generated
using a different buiid time sysroot. Since we override CC we
still need to honor --sysroot which is specified via TOOLCHAIN_OPTIONS
Fixes
| DEBUG: Executing shell function do_compile
| CC src/sys_exec/sys_init.o
| In file included from src/sys_exec/rsc_table.h:13:0,
| from src/sys_exec/sys_init.c:19:
|
/home/ubuntu/work/angstrom/build/tmp-angstrom_next-glibc/sysroots/x86_64-linux/usr/lib/arm-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.9.2/include/stdint.h:9:26:
fatal error: stdint.h: No such file or directory
| # include_next <stdint.h>
| ^
| compilation terminated.
| make: *** [src/sys_exec/sys_init.o] Error 1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Using variables for KERNEL_GIT_URI and KERNEL_GIT_PROTOCOL allows layer
bbappends to specify local repositories to test of pending changes that
are not available in the official TI kernel, without requiring
duplication of config fragments specified in SRC_URI in the base recipe.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Enable "sgx" feature on all - the driver may still be missing, but GLES is
available from omap5-sgx-ddk-linux package
* Enable "touchscreen" feature only on dra7 and am57 - not available on omap5
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Since we are re-using the Linux cross-compiler to compile Cortex-M3 firmware
code and not a dedicated bare-metal compiler, we have to match the float ABI
for the compiler to find the correct gnu/stubs.h files. In other words, if we
built a hardfp compiler, it doesn't have the corresponding gnu/stubs-soft.h
header and fails when building anything non-hardfp. Even though float ABI
flag doesn't make any sense for Cortex-M3 build. The error looks like this:
| CC src/sys_exec/trace.o
| CC src/sys_exec/sys_init.o
| In file included from /OE/sysroots/am335x-evm/usr/include/features.h:402:0,
| from /OE/sysroots/am335x-evm/usr/include/stdint.h:25,
| from /OE/sysroots/x86_64-linux/usr/lib/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/4.9.1/include/stdint.h:9,
| from src/sys_exec/rsc_table.h:13,
| from src/sys_exec/sys_init.c:19:
| /OE/sysroots/am335x-evm/usr/include/gnu/stubs.h:7:29: fatal error: gnu/stubs-soft.h: No such file or directory
| # include <gnu/stubs-soft.h>
| ^
| compilation terminated.
| Makefile:51: recipe for target 'src/sys_exec/sys_init.o' failed
| make: *** [src/sys_exec/sys_init.o] Error 1
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Move repo to git.ti.com
* Bump PE due to versioning schema change
* Drop init scripts needed back in 3.8 days
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Previous patch introduced a typo, the correct name is am335x_boneblack_config.
Thanks to Diego Sueiro <diego.sueiro@gmail.com> for spotting it.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Using the am335x_boneblack configuration for u-boot allows to save the
environment to the emmc. Else, it is not possible to save the
environment at all.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update SGX patching, as now being partially upstreamed to the kernel.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Mainline version of 2014.07 will be pushed to mainline OE-Core soon.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
* This machine config is based on dra7xx-evm.conf.
* However, due to differences in the boards a different serial console is used.
* Update port for the am57xx-evm (GP).
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* These binaries are for the DSP and the strip command in the
ARM compiler does not work on them. Without this the following
error is seen:
* ERROR: runstrip: ''arm-linux-gnueabihf-strip' --remove-section=.comment
--remove-section=.note '<PATH>/dra7-dsp1-fw-radio.xe66'' strip
command failed
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update to use the dra7xx SOC_FAMILY instead of the specific
dra7xx-evm machine type.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update the include file used to the dra7xx.inc file which
brings access to the dra7xx SOC_FAMILY
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the AM57xx machine type which is used to differentiate
between the AM57xx and the DRA7xx which are derivative devices
with different HW platforms and SoC capabilities.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Create the dra7xx.inc file which inherits the omap-a15.inc file
and then adds the dra7xx as another valid SOC_FAMILY setting.
* The addition of the dra7xx SOC_FAMILY is done while still keeping
access to the omap-a15 family. What this means is that omap-a15
can apply to omap5-evm, dra7xx-evm, and am57xx-evm. Then the
dra7xx family can be used to differentiate between omap5 and
dra7xx based devices.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Leave 4.9 as the last release providing softfp binaries and x11 support.
Leave 4.5 for now as being widely used on legacy omap3 devices.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The do_prepsources task runs after do_unpack at which point the
${S}/patches directory has been created. In the last step of
do_prepsources, code should be copied over to ${S} by the release.sh
script. However, this script silently fails if the target directory
(${S}) is not empty---it contains the 'patches' directory. The
failure manifests in the do_patch step when trying to applying patches
against the source which wasn't populated by release.sh.
Here, we pre-emptively clean out the directory release.sh intends to
use. The patch directory is re-created by the do_patch step.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
A number of recipes in recipes-ti install more files than are
packaged causing lots of QA errors. We choose to ignore these.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This recipe use autotools and breaks when built out-of-tree
(${B} != ${S}).
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Critical fixes have been added to the ti-u-boot-2013.10 branch for AM4x.
* Update commit id to point to this new commit.
* For all other platforms nothing should have changed.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Remove old mainline u-boot versions since the latest version
has better support for TI platforms.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The latest mainline u-boot works well for most TI devices and
we want to enable more people to use and test it. Adding
version 2014.07-rc3 will allow more people to build and use this
u-boot version
* Add a dependency on dtc-native since the latest mainline of u-boot
now requires this and not every build host will have the right
version.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since sgx support is broken for newer kernels and Qt4, disable it for now
until Qt5 becomes default and kernel drivers are updated.
This reverts commit f9253dc88f.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* It breaks libgles/SGX due to missing omafb/omafb.h header
* Will be switching to 3.14 instead for LTS
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* Add a missing space to KERNEL_CONFIG_FRAGMENTS_append
* Use FILESEXTRAPATHS_prepend instead of _append version
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add version 3.15 of the TI integration kernel. Major changes
from previous version are:
* Config fragments now come primarily from the integration
tree. Removed baseport and connectivity fragments for now
and the others can be removed as they are added to the
integration tree.
* Added a non-smp.cfg config to disable SMP for single core
devices instead of using a patch to the defconfig file as
we did in the past.
* Use the right SRCREV
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Allow the use of in-kernel config fragments instead of only
pulling config fragments from the OE meta data.
* The absolute path to the config fragment is used to allow
pointing to different fragment locations.
* Update the linux-ti-staging_3.12 recipe which uses config
fragments to specify the absolute path
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* As we add the next version of the linux-ti-staging kernel there
will be a different list of config fragments, removed patches,
etc. For this reason it makes sense to have the file directory
be version specific
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The 3.8 version is replaced with v3.12 which has full support
for all devices.
* As part of adding a v3.15 version cleanup the v3.8 version to
reduce the number of kernels to latest and last stable.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Also version 1.9.0.10 of the recipe doesn't have necessary PROVIDES and
results in conflicts with mesa and other gl/gles providers.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* Pulled in latest version 1.9.0.12 from meta-ti-gsldk and
preserved authorship for Mrinmayee
* Mark this recipe as providing the gles1, gles2, and egl
libraries so that it doesn't conflict with other recipes like
mesa and will be pulled in to satisfy those dependencies
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add sgx to the MACHINE_FEATURES so that the dra7xx-evm can
start including sgx libraries. NOTE: currently there are
no driver modules that work with v3.12 of the Linux kernel
but this does work with version 3.8.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Migrated from meta-ti-glsdk and preserved authorship for
Mrinmayee
* This library allows use of the GC320 2D blitter
* Modified for upstream:
* LICENSE was changed to BSD-3-Clause but the TI-TSPA license
is still present as well so modified this to be a dual
license package.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Migrated from meta-ti-glsdk and preserved authorship for
Karthik
* Modified for upstream:
* Made PACKAGE_ARCH machine specific
* Removed bogus HOMEPAGE setting
* Separated the firmware into a ${PN}-fw package and left the
ARM side RadioApp in the base package.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Migrated the dspdce-fw recipe from meta-ti-glsdk and
preserved authorship for Mrinmayee.
* Cleaned up for upstream:
* Removed the MACHINE name from the recipe name
* Used MACHINE variable in SRC_URI
* Update to use default variables such as base_libdir
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Based on recipes from meta-ti-glsdk and preserved authorship
for Mrinmayee
* Modified for upstreaming:
* Combined the dra7xx-evm and omap5-evm versions into a
shared recipe. This changes the recipe name to just
ipumm-fw.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update the 3.00.00 and 3.21.00.07 versions of ti-ipc to use
a common ti-ipc.inc file which combines the configuration and
installation steps for both to be common.
* Modify the tiiipclad-daemon.sh script to have a replacement
variable so that it can be used for more than a single device.
* Move the tiipclad-daemon script to the ti-ipc directory with
the rest of the files used by this recipe.
* Fix the permissions for the tiipclad-daemon script
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Added version 3.21.00.07 from the meta-ti-glsdk layer.
Preserved authorship by Mrinmayee
* Cleaned up the recipe for upstream by removing the sed lines
in do_configure and instead using EXTRA_OEMAKE values passed
into the make process.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The ti-ipc.inc file was for the legacy 1.24.00.16 version of
ti-ipc. So consolidate these files together since there is
only one version of the ti-ipc recipe that needs that .inc
file and there are no updates planned for it.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
k2l-evm machine config shares the same Keystone SoC family, it has K2L EVM
specific machine configuration for UBI image, boot monitor, U-boot, etc.
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Keystone II SOC family has multiple devices and EVMs: k2hk, k2l
and k2e, each EVM should have a separate machine config, and share
the common keystone SOC family.
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Modified version of the original patch from Sam Nelson
* Update source URL/REV
* Added SPI NOR binaries and deployed images
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Do not apply systest fragment by default on the production build.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Reviewed-by: Chase Maupin <chase.maupin@ti.com>
* Use in-kernel merge_config.sh script and KERNEL_CONFIG_FRAGMENTS list
* Move copying provided defconfig from own task to do_configure() for atomicity
* Don't use curly brackets for shell variables to avoid conflict with Bitbake
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Reviewed-by: Chase Maupin <chase.maupin@ti.com>
The new Texas Instruments Text File License (TI-TFL) is now replacing the
old Technology and Software Publicly Available (TSPA) license. But there are
older versions of the components previously released under TI-TSPA license.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
- The keystone-evm actually has 512 MB Nand
( Changing from previous size of 128 MB)
- LEB calculated with reserved 10 MB for boot and 20 MB
for receovery image
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Instead of creating all folders, only create those that exist
in the Graphics SDK. This fixes QA issue with unshipped ES9.0
folder which does not exists in 4.09.00.01.
Signed-off-by: Samuli Piippo <samuli.piippo@digia.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
- Supports communication between processors in TI keystone architecture
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add latest version of the Graphics SDK that includes bug fixes.
* Fixed Suspend and Resume issue on AM43x.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This class has been deprecated for a while. The recommended replacement is
to use Yocto Project's new "wic" tool.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
cmem module provides user space contiguous memory allocation
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Remove the RDEPENDS for the am33x-cm3-initscript package since
the latest kernel source use the hotplug functionality to load
the firmware.
* Updated the SRCREV to the latest kernel sources which include
the hotplug fix.
* Bump the MACHINE_KERNEL_PR for the am335x and am437x devices
which are affected.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* By setting the UBI_VOLNAME variable the default name for the
UBI rootfs will match the default used by u-boot so images
built through OpenEmbedded will work with out-of-box u-boot.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
es9 package was missing INSANE_SKIP used for other esX packages.
Signed-off-by: Samuli Piippo <samuli.piippo@digia.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the 5.01.00.01 version of the graphics SDK which supports
suspend/resume operations for the v3.12 and later kernels.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The VPE firmware should only be added for the dra7xx-evm
machine type since that is the device with the VPE IP.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This recipe will create the firmware and test application
packages.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The ti43x devices use the same firmware image but load it
slightly differently.
* Add a different init script to load the firmware image for
ti43x devices.
* Because there are different init script make the package
machine specific.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This way the default for am335x and am437x will be the new 5.00.00.01 Graphics
SDK release, that matches the default 3.12 kernel.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
From the README file:
You may use, distribute and copy this software under the terms of the MIT
license. Details of this license can be found in the file "MIT-COPYING".
Alternatively, you may use, distribute and copy this software under the terms
of the GNU General Public License version 2. The full GNU General Public
License version 2 can be found in the file "GPL-COPYING".
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* New Graphics SDK with am43x support has been added.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The PowerVR SGX544MP2 is found on omap5 and dra7xx devices. This
recipe adds support for the PowerVR graphics subsystem.
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Signed-off-by: Siddharth Heroor <heroor@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
These libraries are not distributable in source and hence
are available only as binary. They implement OpenGLES 1.x and
OpenGLES 2.x accelerated using SGX 544-MP2 found in OMAP5
class of devices.
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The OMAP5 Audio Backend requires a 'firmware' to enable
sound. This recipe installs a prebuilt firmware. This
part is a hack, as in the current form, the firmware
cannot be cross-compiled. There is a plan to fix this
and hopefully, this recipe is short-lived. Once the code
is fixed, we should have new recipes that build the firmware
and clean up this recipe.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Migration of u-boot code to omapzoom.org. The development tree is shared
between the Linux and Android teams.This enables a common u-boot development
platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Initial support for AM43x platform
* 3.12 kernel support for AM335x & AM43x
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Adds initial support for AM43x platform
* Supports 3.12 kernel for AM335x and AM43x
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This reverts commit 35234fa937.
This was mainly needed for DTB fix that is specific to dylan branch and
is not required for master, plus it complicates life for other layers.
There is still a problem with Poky when manually adding layers and not
thinking about the correct order...
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This helps avoid bblayers.conf ordering issues, when temporarily overriding
files from oe-core in meta-ti.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
With the recent introduction of mesa-gl, there is no longer a need to override
main mesa PROVIDES list to avoid conflicts with libgles-omap3, remove bbappends
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Kernel source migration from git.ti.com to omapzoom.org. The development
tree is shared between the Linux and Android teams.This enables a common
kernel development platform for both the teams for better alignment.
* Add support for VIP and VPE
* Add wilink/wlan support
* Enable rpmsg/remoteproc driver for multimedia
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Now the DRA7xx support is fully merged into upstream u-boot
then we can remove setting the PREFERRED_PROVIDER for
u-boot and virtual/bootloader to u-boot-dra7xx and instead
pick up the default setting from the omap-a15.inc file.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update the U-Boot LICENSE md5sum for the new release.
* Update the PV for the new U-Boot release
* Add the SRCREV that points to the 2013.10 release
* Use the ti-u-boot-2013.10 branch
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Eliminate need for BBMASK - remove images requiring systemd/angstrom dependency
* Move ti-test packagegroup to proper location and update from latest Arago
* Move BoneScript and Bone GSG recipes to recipes-ti/beagleboard
* README in recipes-ti warns about unsupported nature of those packages
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* For am335x and am437x, the kernel and u-boot expects the ubifs volume name
to be set to "rootfs".
* Set UBI_VOLNAME variable to "rootfs" so that the ubifs files generated by OE
will work.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Use SOC family value for am437x instead of machine name for DTB files.
* This mimics the current approach taken for am335x.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
To be used with latest u-boot that prefers zImage over uImage
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* The PM for TI parts was merged in
* Platform and connectivity got updated
* Since we now have separate DTB for BeagleBone Black, install it too
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Set up the run-time dependency on the package with devicetree files to be
installed in /boot directory of the rootfs. The new U-boot prefers to load
them from /boot directory of the rootfs instead of the separate boot partition.
Also, there are some specific requirements for naming DTB files in /boot
directory (like no extra prefixes), but that should be addressed separately.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Bump the SRCREV for 2013.10-rc4 pre-release
* The Licenses/README file has been changed with new licenses added, but the
general license hasn't changed from GPLv2, so re-hash the file
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Tom Rini <trini@ti.com>
Essentially, machine_kernel_pr.bbclass does this one line assignment, but
introduces a new unnecessary dependency on meta-openembedded/meta-oe layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Many machines are supported by newer 3.x kernel recipes
* Few old platforms are still supported by 2.6.37 recipes
* Some platforms are not supported in meta-ti, like Crane, Touchbook, Overo
* For any platform still requiring this outdated kernel, the recipe can be picked
up from Danny or Denzil
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Hawkboard platform is not supported in meta-ti.
* Since there no new revs of the kernel, the old recipe can be picked up from
Danny or Denzil.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Beagleboard is supported by newer 3.2 and 3.3.7 kernel recipes.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
This adds a new mandatory dependency on meta-openembedded layer. While we are
still trying to resolve an existing optional dependency, not bring a new one.
The MACHINE_KERNEL_PR requirement will need to be handled differently.
This reverts commit 1450f19380.
* MACHINE_KERNEL_PR was originally defined in the kernel class located in
meta-oe which overrode the version of the class in oe-core.
* Some time ago kernel.bbclass was removed from meta-oe and a separate class
machine_kernel_pr was created to add support for MACHINE_KERNEL_PR.
* Since this variable is used significantly in both meta-ti and meta-arago make
sure all the kernel recipes directly or indirectly inherit this new class.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
We rely on kernel-base having run-time dependency on kernel-image, which
normally would pull uImage/zImage into /boot directory of rootfs.
Thanks to Chase for pointing me in the right direction by noticing that our
addition of cm3 firmware breaks that dependency for ti33x.
The reason for that is RDEPENDS is being conditionally assigned with ?=
in kernel.bbclass and using += with machine-override clears that value due
to the order of processing. Hence _append should be used instead of += to
process it after the machine-override takes place.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
* To be used with latest u-boot, that prefers zImage over uImage
* ti33x will follow as soon as u-boot changes its default for that platform
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Tom Rini <trini@ti.com>
* DTB for OMAP5 sEVM was removed upstream, drop it from the recipe
* Don't mask the default preference to be picked up normally by supported machines
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Some kernel versions (and corresponding u-boot) may still need to set uImage,
as preferred image type, since the machine config changes preference to zImage
for newer kernels - keep that for ti33x and omap-a15 stuck on 3.2 and 3.8.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Checksums are handled as var attributes and require immediate expansion,
so use := operation as in the original patches, that got lost in the update.
Otherwise do_fetch will fail to validate the checksums.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This is based on the work by Franklin Cooper, with following changes:
* Cleanup and simplify the logic
* Reduce the number of Python calls
* Expand support from Raw to X11 variant
The original description:
* The Graphics SDK includes some binaries that are prebuilt.
* These prebuilt binaries come in two versions of the Graphics SDK. By default
the prebuilt binaries are built using a softfp toolchain. A separate hardfp
Graphics SDK exist that contains binaries that are prebuilt with a hardfp
toolchain.
* Add support for both by checking to see if the toolchain used in the OE build
is using a hardfp or softfp toolchain.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Franklin S. Cooper Jr <fcooper@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
This is based on the work by Franklin Cooper, with following changes:
* Cleanup and simplify the logic
* Reduce the number of Python calls
* Expand support from Raw to X11 variant
The original description:
* The Graphics SDK includes some binaries that are prebuilt.
* These prebuilt binaries come in two versions of the Graphics SDK. By default
the prebuilt binaries are built using a softfp toolchain. A separate hardfp
Graphics SDK exist that contains binaries that are prebuilt with a hardfp
toolchain.
* Add support for both by checking to see if the toolchain used in the OE build
is using a hardfp or softfp toolchain.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Franklin S. Cooper Jr <fcooper@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
The new method is to automatically package modules into kernel-module-<modname>
and make the custom name depend on the standard unified one. Messing with
FILES_${PN} usually causes problems, so avoid it and let module.bbclass do
it's magic.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The new method is to automatically package modules into kernel-module-<modname>
and make the custom name depend on the standard unified one. Messing with
FILES_${PN} usually causes problems, so avoid it and let module.bbclass do
it's magic.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Do not hardcode kernel source location and name.
* Fix some discrepancies between GFX SDK versions as related to DRM.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Use properly FILES_${PN}-dev to avoid warning about replacing value with default.
Signed-off-by: Valentin Cobelea <valentin.cobelea@enea.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The old way of setting THISDIR in a bbappend clobbers THISDIR for
other layers. This change makes it use the new way that is done
in dylan.
Signed-off-by: Ian Reinhart Geiser <igeiser@devonit.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The old way of setting THISDIR in a bbappend clobbers THISDIR for
other layers. This change makes it use the new way that is done
in dylan.
Signed-off-by: Ian Reinhart Geiser <igeiser@devonit.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* On am335x a memory alignment issue was found when using the Linaro toolchain.
* A similar patch was applied for am335x that fixed this well documented issue.
* Add a similar fix to am37x and am3517 since this is a generic armv7 issue.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Latest commit includes the following:
* Add support for Beaglebone Black
* Add fix for Linaro toolchain to insure NOR and RNDIS works.
* Add workaround for Errata 1.0.24
* Enable DDR3 power down for BBB and GP evm.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add patch that enables Smart Reflex on new PG 2.x boards.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Patches have been added to fix some USB with DMA.
* Enable support for this by default by removing the patch that disabled it.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The GLSDK u-boot staging tree is based off the Core SDK 2013.04.02
release. This tree will be used to stage patches and fixes on
top of the Core SDK U-Boot. The GLSDK release will use this tree
for product development.
* Includes fix to OMAP5 so that QSPI is not enabled.
Signed-off-by: Siddharth Heroor <heroor@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Override SRC_URI to use TI's tree at https://git.ti.com/glsdk/libdrm
This tree includes patches on top of the upstream libdrm for
omap5 and dra7xx class of devices.
v2 :
* Change PR to "${INC_PR}.0" instead of using the SRCREV as per comments
received in v1.
* Add missing configure options to get Kernel Mode Setting (KMS) as
well. This was missing in the original patch.
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Signed-off-by: Siddharth Heroor <heroor@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Machine compatible with only omap-a15 devices.
* The TI Staging tree will not be used to maintain K3.8. Instead,
this new tree is set up as a production tree. Pending features
for 3.8 will be implemented on this tree.
- Backported features from linux mainline
- Backported bug-fixes from linux mainline and linux-stable.
- Features implemented by the GLSDK team which maybe product
specific.
This is the tree on which GLSDK kernel releases will be made.
* This recipe is based off the Core SDK 2013.04.02 released kernel
recipe - recipes-kernel/linux/linux-ti-staging_3.8.bb
Signed-off-by: Siddharth Heroor <heroor@ti.com>
cc: Mrinmayee Hingolikar <mrinmayee@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Enables building/installing both X11 and RAW libs/demos. Plus otherwise the
build is broken for non-X distros, as it pulls in X11 deps due to RREPLACES...
* Fix broken DEPENDS copy/paste typo.
* Also, clean up after the previous changes - extra empty lines, indentation, etc.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
omap3-sgx-modules now contains only non-X11 drivers. The X11 driver is
available in the omap3-sgx-modules-x11 package.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
libgles-omap3 now contains only non-X11 drivers. The X11 driver is
available in the libgles-omap3-x11 package. This package has
dependency on specific kernel versions for DRM builds.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This patch adds correct permissions for startup script pvr-init.
This is part of a clean up of the Graphics recipe starting from
4.09.00.01 version of the Graphics SDK.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
RPROVIDES specifies the libraries that are dynamically loaded
at runtime. This patch fixes "no package provides libGLESv2.so" and
similar errors that occur when including packages like qtbase.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Current recipe copies lot of headers that are unused, including
unsupported files for OpenVG. This patch removes copying of such files.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
OpenVG API is no longer supported in the SGX Graphics SDK.
Customers are encouraged to move to OpenGL ES2.x.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
ES2.0 build option for SGX user binaries is deprecated as the
corresponding SOC is no longer in production
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SGX530 driver for X11 is only buildable and testable standalone
with the pre-built X11 package provided with the Graphics SDK.
This patch removes X11 build from the default kernel module recipe,
to enable moving X11 build to a separate recipe.
This is part of a clean up of the Graphics recipe starting from
4.09.00.01 version of the Graphics SDK.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SGX530 driver for X11 is only buildable and testable standalone
with the pre-built X11 package provided with the Graphics SDK.
This patch removes X11 build from the default recipe, to enable
moving X11 build to a separate recipe.
This is part of a clean up of the Graphics recipe starting from
4.09.00.01 version of the Graphics SDK.
Signed-off-by: Prabindh Sundareson <prabu at ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update to latest sources which pulls in the QSPI patches
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
While the code is being pulled from ti-u-boot integration tree, J6/DRA7xx bring up
is being done from a separate branch that does not include all the commits made
for am335x. Hence, until those branches are merged with the mainline and unified
in a single recipe, a separate recipe just for DRA7xx makes more sense. This
recipe should eventually go away and unified under u-boot-ti-staging one.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* Updated the serial console to use ttyO0 which is what the
evm uses.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the DTB entries for the dra7xx-evm machine type
* Update to the latest git sources which have dra7xx-evm support.
* Update the PV to match the latest source version
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The recipe has been moved to meta-arago-extras long time ago. Moreover, SCM has
changed from svn to git, so this recipe is quite outdated.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* 3.8+ kernels use an init script to load the cm3 firmware.
* 3.2 kernel require the cm3 firmware during compile time therefore no init
script is needed.
* Separate the init script from the main package and place it in its own
package.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update to latest version of u-boot that supports the 3.2 kernel.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update to the latest PSP release (version 04.06.00.10) of the 3.2 kernel.
* Rename recipe to match meta-ti kernel recipe naming convention.
* Use in tree defconfig instead of providing a separate defconfig. These
defconfigs were the same anyway.
* Add additional crypto patches that were needed to fix suspend and resume
issues.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Make the am33x-cm3 firmware a run-time dependency instead of
build time since it is no longer required at build time.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The PM firmware is now loaded using an init script so make
the init script installation part of the firmware package.
* Fix up the SRC_URI to the proper format.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the SRCPV to the PR to make it clear which revision of
the sources are being built and to match the kernel
versioning.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add capability to use KERNEL_LOCALVERSION to set an extra
version string in the kernel. This mimics functionality
submitted to the kernel.bbclass but since this overwrites
the do_configure it must be added here as well.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the latest 4.09.00.01 version of the graphis SDK. This
version will compile against the latest v3.8 kernel.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The U-Boot config to be used in the latest code has been updated
to use omap5_uevm instead of omap5_evm.
* Update to the latest code to pickup this change and modify the
machine file as well.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Now that the setup-defconfig.inc file has been moved to the
meta-ti layer the kernel recipes should include this file.
* This makes way to clear this inclusion from the bbappend files
in meta-arago
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the dra7xx-evm machine type which is part of the omap-a15
SOC_FAMILY
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update to the latest kernel sources. This also requires changing
the dtb file names since the omap5 devices have changed to use
uevm instead of panda and sevm instead of evm.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
* Add the omap5-panda.dts file as a supported DTS to be built.
This file is for use on the panda and uEVM boards.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The serial console for the OMAP5 uEVM is ttyO2 not ttyO0
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the machine configuration for the OMAP5 EVM device.
* Create the omap-a15.inc file to be shared with all OMAP
Cortex-A15 derivative devices.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the KERNEL_DEVICETREE definitions for omap5-evm
* Add the omap-a15 SOC_FAMILY to the list of COMPATIBLE_MACHINEs
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Introduce own namespace to allow multiple instances of the same base version,
possibly pulled from different trees or patched/customized for specific SoC.
* Suffix-less variant u-boot_YYYY.MM.bb is reserved for mainline versions of the
recipe with no or minimal patches, with broader machine selection.
* Recipes for machine- or SoC-specific trees should use corresponding suffix -
either machine, SoC or the name of the tree.
* The .inc file lets the suffixed recipes to provide virtual/bootloader, u-boot,
as well as generate conventional u-boot binary packages for direct run-time
dependencies.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the older 3.2 recipes for
stability or featureset, by setting PREFERRED_PROVIDER in distro or local config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Switch to using the official git.ti.com URL instead of temp gitorious.ti.com
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* Update SRCREV for the recent merges in TI staging tree, still 3.8.2
* Bump MACHINE_KERNEL_PR to trigger rebuilding out-of-tree components
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Until the permanent fix can be picked up in oe-core fix the
do_deploy function to properly package the dtb files built
as part of the kernel build.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* For the ti33x SOC_FAMILY device package the dtb files for all
of the am335x boards instead of just the single EVM file.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The DEPENDS on am33x-cm3 and the installation of the cm3
firmware is specific to ti33x SOC_FAMILY devices. Mark those
pieces as specific so that other devices to not depend on
am335x cm3 firmware.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Use the setup-defconfig.inc functionality to specify the in
kernel tree defconfig file to use rather than hard coding it
in the do_configure step.
* This is to make it easier to modify which configs are use by
other layers as well as supporting additional machines which
may not use omap2plus_defconfig as needed.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Moved the setup-defconfig.inc file from meta-arago to meta-ti.
This functionality is used by the SDKs to allow the option for
using an in-tree configuration file for the kernel build.
* This option was chosen to make it easy for other layers to
override the config with their own using the normal OE method
of specifying a defconfig file in their layer rather than having
to use some custom variable setting.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* There is no support for these platforms from meta-ti.
* If someone is willing to maintain them, please let us know or feel free to
take it to a separate layer.
* Therefore, remove SoC and machine configs, kernel, u-boot and X11 configs
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There is no support for this device from meta-ti. Plus I don't have the device.
If there's anyone willing to maintain it, please let me know or feel free to
take it to a separate layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There is no support for this board from meta-ti. Plus I don't have the board.
If there's anyone willing to maintain it, please let me know.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Every other u-boot git SRC_URI has a different value, so make the odd
ones out consistent with the rest, as in:
-SRC_URI = "git://www.denx.de/git/u-boot.git ...
+SRC_URI = "git://git.denx.de/u-boot.git ...
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Thanks to Robert P. J. Day, MODULE_IMAGE_BASE_NAME was added to oe-core - only
~3.5 years after it got into Classic-OE and with a typo of MODULE_*, not plural
MODULES_*, so match it here and set conditionally.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* This is a pure _mainline_ version w/o any patches on top.
* Should work reasonably well for most platforms and is provided as an
alternative to specialized pre-integrated and patched versions.
* It is not enabled by default, since specialized versions usually have
more features and better support, although maybe slightly older.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add sgx to MACHINE_FEATURES to indicate that a particular machine supports
sgx.
* TI chips are available in multiple variants including some that supports sgx
while others do not.
* By adding sgx as a machine feature other layers can create generic
packagegroups or images for a particular soc but will only include sgx
dependencies if the particular machine has sgx support.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This patch allows libgles-omap3 to build on the danny branch. The following
warnings are not addressed:
WARNING: libgles-omap3: No generic license file exists for: proprietary-binary in any provider
WARNING: QA Issue: libgles-omap3: Files/directories were installed but not shipped
/usr/lib/ES2.0
WARNING: libgles-omap3: The compile log indicates that host include and/or library paths were used.
Please check the log '/prj/oe/omap/build-gumstix-community-danny/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libgles-omap3-4.05.00.03-r35/temp/log.do_compile' for more information.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add version v4.08.00.01 of the Graphics SDK.
* Add X11 support via DRI/DRM Xorg driver
* Replace pvrsrvinit with pvrsrvctl (Imagination Technologies based change)
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Based on the EVM and beaglebone + NAND memory cape we can
increase the base file system size to 500MB since by default
there is about 504MB of space allocated to the file system
partition in the NAND.
* The max size in LEBs was determined using the formula at
http://processors.wiki.ti.com/index.php/UBIFS_Support
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Link the TLC59108 driver statically so ULCD7 initialization occurs
automatically as it did before f0e2305c7e which removed the initialization
from u-boot. (Angstrom-v2012.12 does not include this module by default.)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Recipe pulls in ti-ocf-crypto-module from gforge
* For am37x, this module allows access to the crypto hardware accelerators
through OCF-Linux.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add PRU SW edma driver recipe for the omapl138 machines
* This recipe builds and installs an edma driver module that supports the
edma user space libraries built by the ti-pru-sw-edma-library recipe.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add latest patches to linux-omapl138 that were added since this recipe was
added to meta-ti.
* Update to latest am180x-evm defconfig
* Mimic the following commits from arago:
linux-davinci: update to add mmc patches
* Optimizations to reduce overhead on weak platforms
linux: disable DMA for MUSB
* For the am3517, am180x, and am335x devices the CPPI 4.1 DMA
should NOT be used for the MUSB controller. Using this DMA
can cause the controller to lockup.
* Updated the defconfigs to set the use of PIO mode
* Added a patch to updated the PIO mode description to make it
easier to determine when it can be used.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add MACHINE_KERNEL_PR variable to enable future tweaks to this recipe.
* Convert tabs to whitespaces
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* When testing on am37x-evm I noticed that no prompt to login was ever shown
when connected via serial port.
* I finally noticed that the SERIAL_CONSOLE variable was set incorrectly and
didn't match the value in the old Arago layer.
* After using the values specific in the machine file in the Arago layer I was
able to login via serial port.
* This has been verified on both the am37x-evm and am3517-evm.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This adds recipe to build boot monitor image. Boot monitor is
a standalone image that is loaded and executed from u-boot to
replace the RBL provided monitor code in ARM with Linux boot
specific code.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Bitbake is getting more particular:
ERROR: There is a confusing multiline, partially commented expression on
line 27 of file /scratch/oe/oe-build-core-3/sources/meta-ti/...
Please clarify whether this is all a comment or should be parsed.
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This .bbappend file is used to override the 'interfaces' file for certain
targets. The current version is broken in that it does not search the correct
path(s).
Thanks to Robert P. J. Day and Gary Thomas for spotting the issue and providing
patches.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Keystone uses the old ttyS0 serial name instead of the new ttyO0.
Also disable spawning gettys on virtual terminals.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
There were some changes in the xserver-xorg upstream project that need
to be reflected here too:
* extmod module was removed completely as it became empty;
* DRI1, DRI2, DBE (among others) were made built-in;
(see poky rev: 5cea09e3d010d4799eab296b2a0cb83a0af09c76)
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This reverts commit cce5a7aea9.
Because oe-core (then poky master) was upgraded to libdrm 2.40,
and because OMAP experimental support was enabled there too.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Check to see if the pvrsrvkm.ko module was found and that the insmod
for that module was successful.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Non X11 base distros are unable to build this Graphics SDK.
* This patch tweaks the libgles-omap3 include file to always build the
Graphics SDK in Raw mode and also build in X11 mode only if X11 is
a part of the DISTRO_FEATURE. Components are built, installed and packaged
based on which mode the Graphics SDK is built in.
* Create a new variable PVR_INIT that is by default set to pvrsrvinit. This is
needed for newer version of the Graphics SDK that replaced this file.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Updated the IMAGE_FSTYPES to ubi and tar.gz for the AMSDK
machine types as the base file system type.
* This was done to speed up compression/decompression time at
the expense of file size.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Ported from Arago the kernel that corresponds to PSP version 04.02.00.07 with
corresponding SDK patches applied on top.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Also we need to pull in module-exa as xf86-video-omap relies
on it, at run time.
And replaced the default xorg.conf for 'omap4' machine to take
new driver into account. Do not enable HWcursor (e.g. mouse
using DSS overlay) to keep things simple for now..
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Signed-off-by: Hervé Fache <h-fache@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since this component is still actively being developed, let's use
a _git.bb recipe. We can introduce 'x.y' version later.
Even though xf-video-omap can be combined with private/restricted
EXA sub-driver for SGX/PVR, it can also work without it. In which
case EXA aren't using SGX, but all standard driver features still
work, and it is a replacement for xf-video-fbdev.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Signed-off-by: Hervé Fache <h-fache@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Used Herve's version as a base with some mods from Enrico and additional fixes
on top, defconfig is the validated one from GLP release.
Signed-off-by: Hervé Fache <h-fache@ti.com>
Cc: Enrico Butera <ebutera@users.berlios.de>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the PSP release version of the Linux kernel for the am335x-evm
* Include a variable called KERNEL_PATCHES which can be used to add
patches on top of the PSP release of the Linux kernel. Currently used
to apply various patches that add functionality or fixes bugs.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Commit d8fc4a6862 addressed an issue where
too many newlines characters were being sent since print by default already
sends a newline character. This commit however resulted in bin files being
installed in the WORKDIR and broke other recipes which commit
a94f765b98 addressed. This lead to a very
cluttered WORKDIR.
* This patch updates ti-eula-unpack.inc to switch from using a print to a write.
Since write doesn't automatically send newlines it is a bit more obvious when
newlines are sent.
* Part of the reason that bin files were being installed in the WORKDIR was
due to TI_BIN_UNPK_WDEXT being blank for some recipes. For instance in the
libgles-omap3 recipes, when the workdir command is set in TI_BIN_UNPK_CMDS the
directory that the Graphics SDK will be installed into is
workdir+TI_BIN_UNPK_WDEXT. A blank TI_BIN_UNPK_WDEXT means the SDK will be
installed in WORKDIR. By setting TI_BIN_UNPK_WDEXT to a proper value the
recipes can be sure it is installed in the proper directory.
* Determine which file to download based on the defined BINFILE and not a
hardcoded value. This idea was taken from arago.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the PSP release version 04.06.00.08 of u-boot.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Newer versions of libgles-omap3 utilize a different PLATFORM value. This
patch allows the PLATFORM variable to be easily overridden if needed.
* Replace the hardcoded usage of LinuxOMAP3 with the PLATFORM variable.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since systemd-image from meta-angstrom already includes timestamp-service, remove
the duplicate from ti-hw-bringup-image recipe, which uses the former as a base.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Lowering layer priority from 10 to 6 aligns meta-ti with other BSP layers
and also allows distributions to override our recipes.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
For libgles-omap3 compatible machines mesa should only provide libgl.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Rebased to squash removal of mesa-xlib.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
An extra test for the FTDI eeprom was added to catch programming errors that would break CCS.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add more RTC modules
* Disable cgroup controllers with a lot of overhead
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
bring recipes in sync with OE-Core, task bbclass
is now replaced by packagegroup.
and task recipes are now called packagegroup_something
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Regenerate all beaglebone patches and add one vfs tracer patch for powertop
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Subject: [PATCH 3/3] uio_pruss3: Workarounds put into core code to support our devices
This patch modifies uio.c to support the uio_pruss driver. The UIO user space module relies on IO memory being mapped to user space. The IO map works fine for all mapped virtual addresses less than 0x80000000. However for the uio_pruss driver, the virtual address is on the higher side, so it fails. The fix added in this patch is mainly to check if the page map returned is correct.
Signed-off-by: Amit Chatterjee <amit.chatterjee@ti.com>
@@ -105,13 +105,11 @@ static int __init omap4_pm_init(void)
pr_err("Power Management for TI OMAP4.\n");
-#ifdef CONFIG_PM
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains\n");
goto err2;
}
-#endif
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
--
1.6.6.1
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
